Parse the string using RegEx REMatch

Similar Questions

• Parse the JSON using PL/SQL string

  I created a script that reads data from the Mobile App DB (which is based on MongoDB) of Oracle SQL Developer. The result is the string JSON stored in l_response_text VARCHAR2 (32767);

  The string has the format such as:

  
  

  [{"Postcode":"47100","OutletCode":"128039251","MobileNumber":"0123071303","_createdAt":"2014-11-10 06:12:49.837","_updatedAt":"2014-11-10 06:12:49.837"}, {"Postcode":"32100","OutletCode":"118034251", ..... ]
  
  
  
  
  

  However, I need to analyze this l_response_text such that each table will in his column in a table called appery_test. appery_test table has the same number of columns pairs JSON and in the same order (e.g. name of the first column is 'postal Code')

  I searched and I found most of the results on the analysis of the Oracle in JSON table and not the other way around. I found, however, that link which is somewhat similar to my problem. However, the library suggested in the answer doesn't have an example on how to use it to insert JSON into conventional table using PL/SQL.

  N.B.: I use g 11 and not 12 c. If the functions built by are not available for me.

  Thank you very much

  Sorry, I am a novice in this area too.

  However, it worked for me:

  declare

  l_list json_list;

  l_data CLOB;

  Code postal clob;

  l_val json_value;

  Start

  -json data recovery

  Select the data in l_data from jsons where id = 1;

  l_list: = json_list (l_data);

  I'm looping 1.l_list.count

  l_val: = json_ext.get_json_value (json (l_list.get (i)), 'Postcode');

  DBMS_LOB.CREATETEMPORARY (zip, true, 2);

  json_value.get_string (l_val, postal code);

  -Put some things

  dbms_output.put_line (DBMS_LOB. GetLength (Postcode));

  dbms_output.put_line (dbms_lob.substr (postal code, 20, 1));

  DBMS_LOB.freeTemporary (Postcode);

  end loop;

  end;

  47328

  9J / / 4AAQSkZJRgABAQAA

  Added dbms_lob.freetemporary (postcode);

• Need examples of code to parse the xml using kxml2

  Hello world

  I am a beginner for Blackberry, I want to get the data from the xml file. I look and see the section use of kxml2 is a better choice.

  But I can't find an example code for it on the Blackberry.  Can someone share me?

  I open kxml2.jar, I see xmlParser and kxmlParser, whoever I'm use()?

  Anbody can help me contact how to use kxml2 clearly?

  Thank you very much. Sorry for the bad English.

  --------

  Binh - VietNam

  Ah yes, sorry, I assumed automatically kxml to be used with ksoap2.

  kxml is a j2me parser commonly you can find sources in other forums, for example
  http://www.developer.Nokia.com/community/wiki/How_to_parse_an_XML_file_in_Java_ME_with_kXML
  http://j2mesamples.blogspot.com/2009/04/XML-parsing-in-J2ME.html

• Parse the string into two double

  Hello everyone, once again

  I'm taking a string of numbers that can be anywhere from - 999999.999999 to + 999999.99999 and separate them into two double rooms. For example, if a user entry - 10000, 10000 - two doubles would be-10000 and-10000. If the user has entered - 10.11111- + 20.00111 he got out - 10.11111 and 20.00111. The VI "Extract the numbers" did perfectly, but I need a way to return the results in two double rooms instead of an array of doubles. I also results to return all the digits after the decimal point for reasons of precision. I use this code within one of my States in a state machine and the driver I use only accepts double rooms.

  The code of "Extract the numbers" VI is attached. Thank you all!

  

  Hi buickgn,

  When your code works, you should only use IndexArray on outputs. If not, try this one:

  

• Parse the string as an xml?

  Hello

  I want to do the following

  InputSource is = new InputSource();is.setCharacterStream(new StringReader(xmlRecords))
  

  But it seems that these methods are not available on the BB. What is the soapy foregoing?

  InputStream inputStream = /* XML String */Document document = builder.parse( inputStream );
  

  Thanks in advance

  Wesley Trollip

  ByteArrayInputStream bis = new ByteArrayInputStream (xmlString.getBytes("UTF-8"));

  Doc document = builder.parse (bis);

• How to remove special characters from the string using translate() without typing all special characters?

  Hi all

  I am trying to remove special characters without the help of regular expressions.

  translate (the column name or string,'!@#$ & * (* () _) * "" :} {?}) >? /, «, » ')

  I want to eliminate this manual process to give all special characters using a chr() or ascii() function.

  Please show me the way.

  Thanks in advance

  Similar to the solution of Michael...

  SQL > ed
  A written file afiedt.buf

  1 with t as (select "[it comes of the #] [more amazing!") Test @# "$* & $%) assuming chain cost $ 5 000' double Str)
  2, i like (select level 1 c from dual connect by level<=>
  3 less
  4 Select + 32 (level-1) double connect by level<=>
  5 less
  6 select + 58 (level-1) double connect by level<=>
  7 less
  8 select + 91 (level-1) double connect by level<=>
  9 less
  10. Select 123 + (level-1) from dual connect by level<=>
  11 less
  12. Select 255 double
  13            )
  14, ts as (select level r, substr (str, level 1) c
  15 t
  16 connect by level<=>
  17             )
  18, tf as (select row_number() (order for r) r
  19                    ,ts.c
  20 TS
  21 I join on (i.c = ascii (ts.c))
  22             )
  23 select replace (sys_connect_by_path(c,'!'),'! ') Str
  24 TF
  25 where connect_by_isleaf = 1
  26 connect r = prior r + 1
  27 * start with r = 1
  SQL > /.

  STR
  -----------------------------------------------------------------------------------------------------------------------
  Thisisthemostamazingtest¸astringcosting5000

  Or something as horrible as this...

  SQL > ed
  A written file afiedt.buf

  1 with t as (select "[it comes of the #] [more amazing!") Test @# "$* & $%) assuming chain cost $ 5 000' double Str)
  2, I like (select replace (sys_connect_by_path (chr (c), 'A'), 'A') as tr)
  3 of)
  4 select c, rownum r
  5 (select 32 + (level-1) as the double connection by level c<=>
  6                         union
  7 select + 58 (level-1) double connect by level<=>
  8                         union
  9 select + 91 (level-1) double connect by level<=>
  10 the union
  11. Select 123 + (level-1) from dual connect by level<=>
  12 union
  13. Select 255 double
  14 tri 1
  15                        )
  16                  )
  17 where connect_by_isleaf = 1
  18 log r = prior r + 1
  19 start with r = 1
  20            )
  21 select translate (str, 'A' |) TR, 'A') as str
  22 * t, I
  SQL > /.

  STR
  --------------------------------------------------------------------
  Thisisthemostamazingtest¸astringcosting5000

• How to determine the length of the string when the string using LabVIEW MoveBlock pointer dereference

  Hello!

  Calling a DLL that returns a pointer to a structure consisting of a pointer to a string, a 32-bit integer and a pointer to another string.

  I managed to MoveBlock to return a consolidation of these three things, and which works very well.

  But now I need to read the two strings I have pointers to which are not fixed length. MoveBlock has a size of entry, but how to know how long channels are?

  Try this:

  ...\vi.lib\Utility\importsl\GetValueByPointer\GetValueByPointer.XNode

  Wire just a constant string to the Type of entry.  If I remember correctly, the draw of endpoint (assuming that the C strings) will be included.

  Sometimes I have just MoveBlock a byte at a time until I get to a null value or has specified maximum size.

• Display the test using the output "string" indicator?

  Hi, I'm trying out the test to the indicator of string data as you can see below,

  but with 'For' the logic of loop that it is only the display last number, so if you run this, you'll see

  following output.

  Test #6

  If I move the concatenation of string outside of the loop block, you will see the result as below.

  Test #0123456

  However, I want to achieve more of output. Can someone suggest me a way to do it?

  By the way, I use the for loop.

  The output I want to display with the for loop

  Test #0

  1

  2

  3

  4

  5

  6

  Thank you

  

  Close but no cigar.

  You need concatenate the string using a shift register.

  

  This will be the output:

  

• Not use 5.4 ACS for TLS authentication with a certificate not in the string

  Hi all

  I have installed ACS 5.4 and several wireless environments.

  EAP - TLS is used to authenticate users of our area (of self-signed cetificates)

  Then use PEAP and need for a real external cert... (Signed by Terena)

  The problem is that I can use a single certificate for authentication EAP on ACS, and I need them both to work.

  I see only 2 options:

  1 configure the TLS network to authenticate without going through the ACS cert in the string (use the real one)

  2. set up somehow to use two certificates, one for each service.

  Please help, im desperate.

  Thank you!

  Naor

  You can't have several certificates of server/identity on ACS for EAP flavours. As a best practice, get the third-party certificate and check to associate the certificate with the EAP protocols that use SSL/TLS tunneling: EAP - TLS, PEAP and EAP-FAST.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• How does a facility TestStand to parse a string to a TcpIp Read?

  L & G,

  I am interested by linking TestStand for a product of mine and I downloaded the eval and spin a typically TcpIp sequence as shown in the examples.  I'm trying to understand how to configure TestStand to parse the string coming back from my server too the success/failure and test results information present in the returned string.

  I look forward to your responses and thank you for your help.

  Craig Byrd

  L & G,

  I figured out how to create and use a local variable (string) as the chain of TCPWrite by simply changing the TCPWrite to the stage and set the the Results.Data value to use theLocals.TCP.

  Concerning

  Craig Byrde

• Structure from case string "&lt;------"-LabVIEW converts the string

  Hello

  I want to parse the string lines read from a data file.  Some chains start with the characters ".<\".  when="" i="" enter="" this="" kind="" of="" string="" as="" a="" case="" in="" a="" case="" structure="" the="" string="" is="" being="">

  For example, I'm going home. "<\C" (upper-case="" c)="" as="" my="" case="" string,="" it="" changes="" to=""><\f".  if="" i="" enter=""><\c" (lower-case="" c)="" as="" the="" string="" it="" becomes="">

  I am currently using LabVIEW 2012.

  Any ideas what's happening?

  Thank you

  Ian

  Some ASCII characters are nonprinting control characters (less than 32 values). These are sometimes encoded using the backslash code and it seems that is what makes the structure of matter - when you type \C, the structure of the performer as "oh, you want the value 0x0C ASCII, which in the code for backslash is represented" as \f (means 'form feed). "When this is the case, you typically use one-to represent the------characters, so you really need set the structure to match on.<>

• automatic generation of the files using the time and date system

  Hi guys,.

  IAM trying to build a path for the creation of files automatically using system date and time. I'm running into errors with regard to the special characters in the file name. I'm trying to parse the string to get the date and time without the ' / 'and':' but have failed. is there a better way to do it? Help, please! I try to avoid a dialog box for the user to enter a file name.

  Thank you!

  V

  Here's a little experiment... may help build the %d (day) (month) of %m %(year) type stuff.

• How to convert the string to a full decimal point and left shift

  Hey guys I tried to convert gps string to an integer, like this

  A string that is 2467.8976 and I need to convert it to a similar integer as point of this 2467.8979 so that I can shift the decimal point to the left (24.678979) which i coudnt do it with the chain. It's just been my 2 weeks with the labview so be gentle. Thank you

  Hi Awais07,

  Once you have created an indicator that signals the output of parsing the string, right-click on this indicator > display... Format > increase the value of the digit 9

  Kind regards

  Lennard.C

• How to parse a comma delimited by the string in BPEL 11.1.1.4

  I have the MyTag element in xml. I get value for MyTag as Eng, [email protected] (separated by commas) in the BPEL workflow.
  
  I need to parse this string separated by commas in BPEL and extract
  
  Eng AND [email protected]
  
  
  How can I do this in BPEL? What is the process?

  Hello

  If you get the value like Eng, [email protected] and say that tempVariable Eng, [email protected] data. So, here you go...

  substring-after (bpws:getVariableData('tempVariable'), ','), use it in the Expression Builder on the side of the copy operation and that assign to the variable (variable database entry). This will give you [email protected]

  substring-before (bpws:getVariableData('tempVariable'), ','), use it in the Expression Builder on the side of the copy operation and that assign to the variable (variable database entry). This will give you in English

  I hope this helps...

  Thank you
  N

• Using Regex to search for a string

  East - viable to use regular expressions with search "Specific tag" (i.e.script) "with the attribute" (i.e. the CBC) and '=' a regex string rather than a precise search term?  Find / Replace tool seems to prevent a generic find simple (i.e. ' searchter * for searchterm ") any idea would be appreciated.

  

  uneAaron wrote:

  I'm trying to replace a source value of script for all instances where the value contains the string "/ bbcswebdav/xid-144702_1", where the string '-xid' is followed by a different numeric value in each case.

  The regular expression to find this string is:

  \/bbcswebdav\/xid\-[\d_]+
  

  The numeric value contains an underscore, so the last section ([\d_]+) uses a range that selects one or more numbers or underscores.

  Perhaps as important as the identification of what you want to find is to specify how you want to replace it. Regexes can capture groups that can be used in the field replace to simplify things.