Partial administration page [WAG200G]
Hello
I wanted to reuse my old WAG200G lately because my box had blown.
I did a full reset, as recommended on the Linksys site:
http://KB.Linksys.com/Linksys/UKP.aspx?pid=83&app=VW&VW=1&login=1&JSON=1&docid=0309948f53854b47950d7...
However, when I try to display the configuration of the modem, the page appears half like the screenshot:
The browser runs in a loop. If I click on other pages, it works but other pages are blocked:
Tested on IE and Chrome.
I also used the original CD to initialize the modem, but there is an error.
If you have an idea, I'm interested.
Thank you in advance.
Hello ygrakes. Are access you the user of the interface or cable on the WAG200G wireless? Have you tried to access (user interface) using another computer? If you do not have another computer, try to set this computer to static IP, powercycle the computer and try to access the interface again. Just to cover all bases, its best if you clear the cache of historical navigation of the browser as well. As a last resort, do a hard reset (1 full minute) and try again. If all else fails, one can assume that the firmware of the gateway that is perhaps already damaged.
Tags: Linksys Products
Similar Questions
-
How to open "The workspace Administration Page" on APEX 4.0
Here is the page I need ("Workspace Administration Page"):
http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/aadm_hm.htm#BABGGCHA
And it's the opening page:
http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/aadm_hm.htm#BEJDGBBJ
But if I followed these instructions I get from "Instance Administration Home Page":
http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/adm_roles.htm#BABHADJI
How to open "workspace Administration Page"?Hello
Connect on your own is not INTERNAL, work area with the user who is Administrator of the workspace.
Kind regards
Jari -
I want to have the administrative page on my site
Basically I want on the administrative page on my site
who has a field of text and when you enter the text in this box
It updates the text on the homepage or anywhere where it is specified
and I don't know the best way to do this
I know how to do this using flash objects, but I'm not sure it's the best way
I was hoping someone could help me or point me in the direction of a good tutorial
Thank you for taking the time to read> I do not know how to pass the
> variable to the page, it must be on
You do not pass really the value of the form directly to the page on which it should appear.
You need to store the data somewhere on the server. Usually, this is accomplished with a database, but it could also be stored in the file system. The simplified process goes like this.
Data are entered into the form and the form is sent to the script on the server side
Script processes the data and stores it in the database
Other pages read the value from the database and display the data
-
No administration page of coldfusion 8
Hello, I downloaded coldfusion 8 developer editionn, ran the download, followed the process to the end.
the dose of administration page will not load. Something on the page cannot load, no server. I had set up as a local host 8500
I tried restrat the coldfusion application server 8 manually, but it fails, error 1053, server is Word respone to request.
Don't know what to do next? I am running windows xp with service pack 3, can anyone help?
yayasworld wrote:
Hi ok! got that, now I get another error,
Cannot access c C:/coldfusion8runtime\lib\wsconfig.jar
Don't know what that means. Should I start over?
I suspect that you have specified your dir CF somewhere like C:/coldfusion8 rather than C:\coldfusion8\. Because the path, it should be looking is C:\coldfusion8\runtime\lib\wsconfig.jar.
--
Adam
-
Cannot access administrator Page
Coldfusion (6.0UP3) on a Web server from iPlanet on Solaris platform running.
When you try to connect to the Coldfusion Administrator Page (CFIDE/administrator/index.cfm) the errors log receives the following error message:
[1] java.lang.SecurityException: unable to configure CERT for certification approved
to javax.crypto.b. < clinit > ([DashoPro - V1.2 - 120198])
.................
I read that the problem could be resolved with a hotfix or upgrade to coldfusion. I can't patch or upgrade of this system. You have any ideas?
Determine the path to the latest version of the J2JRE segment that is installed on the web server (note that the name of the directory can change with each new version) by running the following command:
Edit the opt/coldfusion/runtime/bin/jvm.config file.
Change the java.home entry in the file from:
Java.Home=/opt/ColdFusion/JRE to: java.home=/opt/J2JRE_1.4.2_06/ replaced by the path to the most recent segment for example path opt/J2JRE_1.4.2_06/ J2JRE.
Step 5:Save the file.
Step 6:Remove the default Java Runtime Environment:
rm - rf/opt/coldfusion/jre / *.
Step 7: Restart ColdFusion:
restart the /etc/init.d/ColdFusionMX -
HP Officejet Pro 8000 Wireless - print out this partial test page after each print job
I get this page a partial alignment (?) after each print job. I reinstalled the software, aligned and cleaned print heads, contacts cleaned print head, but still get this page. Pretty frustrating.
This image, I see that the printer does not align correctly. If the unit is out of alignment, then the sensors in the printer detects it. That's why the printer is constantly trying to perform the alignment.
There is a document with the steps to solve this problem. The document helps walk one by checking the cartridges and the parameters to determine if the problem is software or hardware. Click here to access the troubleshooting document.
I hope this helps.
-
Starting in Windows XP, SP3 without getting automatically the Administrator page
When I boot (Windows XP, SP3), I get only page of the administrator, in spite of the fact that my wife and I have accounts on the machine. If I disable the administrator account, I can get the page showing the two user accounts, but only after I was interrupted by a warning that the administrator account has been disabled, and that I should ask for help to get it repaired. My wife and I are administrators full. How to repair the machine to start showing the choice of my wife and my account, disable the administrator account, or receive warning messages in the Adminitrator of s is disabled? Thank you.
Hey Kanga85,
Have you tried to create an account without password and leaving just as option. That should clear the error. Follow the steps below to do so.You can also start in SafeMode in XP Mode and create a new user account.
1. connect to the account without password.
2. go in user accounts.
3. create a new account with a password adminastrative.
4. exit and restart in normal mode.
5. sign in using your new account name & password.If it wasn't the answer you are looking for please just re - ask your question. I didn't know if the mistake is to your question or you want to bypass the login screen.Thank you! -
RV016 access to the modem in wan1 administration page, wan 2... from LAN
Hello
We have installed router rv016, balancing 5 adsl conections.
We can access the router rv016 with IP 192.168.1.1 LAN.
We can access the administration modem1 page in wan1 which has IP 10.0.0.1
But we cannot access other pages of Directors of modems as fitted wan2 IP 10.0.0.2, or modem wan3 with IP 10.0.0.3, modem wan4 or wan5...
In the diagnosis of rv016 page, we can make a successful ping 10.0.0.1, but not to another wan...
All modems have active DHCP ok with access authorization.
Can you help us?
Thank you!
Hello
Change modems to get LAN IP addresses in different subnets:
10.0.0.1
10.0.1.1
10.0.2.1
10.0.3.1
10.0.4.1
Then, everything should work perfectly.
Please mark this thread as answer or reply if you have any additional questions.
-Marty
-
HP ENVY 4500 only partially printing pages
Bought the printer today and after installation according to the instructions. Decided to report situation printer sheet bu this spell partially printed - a few lines showing only half top of letters and numbers.
Tried to clean the printheads as well but no joy.
Tried out the ink cartridges and reset then a them Algn printer page it still only partially printed.
Checked ink levels and they were all full juice.
Impression I tried an email and once again that some parts of the lines have been printed.
Just to say that left printer off for the night and this morning when I did Printer Status Report it printed perfectly.
Problem solved
-
Locking a Coldfusion instance administration page
I've been looking around and can't find the answer anywhere. I have a web site running on an instance of coldfusion, which became a problem because you can join the admin (www.domain.com/cfide/administrator/index.cfm) page that is causing a security problem.
Of course, we changed the default passwords for all accounts by default but will hide this page from viewers outside. Since it is the way in the administrator of this forum how to lock this down?
You have two options
1. use the security provided by your web server (Apache or IIS) to restrict access to the admin of the site.
2 remove the pages from the admin of your production web server.
See this article from Adobe.
-
Application administration page is not accessible
I recently installed Oracle database Express edition 10g. This went well. I finished the tutorial creating an application using Oracle 10 g Express edition database without any difficulties. Then I started with the Application Builder User Guide. Page 1-7, it tells me to log in Oracle Application Express Administration Services in order to create a workspace. This however does not.
I can go to the home page of Oracle Database bij typing: http://127.0.0.1:8080 / apex in my browser.
However, if I type apex / http://127.0.0.1:8080 / apex_admin, by following the instructions in the guide, I get an error message: could not find Web page.
Please tell us what to doListen me... forgotten doc (you will use for APEX 3.x documentation, but if you can't see the field work space you use Apex 2.2) but in this case, you can go to sites of Directors here:
http://127.0.0.1:8080/apex/f? p = 4550:10 and configured only
user: ADMIN
Password: password_for_your_admin_page -
After changing the black ink cartridge, the print alignment page had 3 blue lines dark, a pale blue line, a red triangle surrounding a red exclamation mark, the word 'IMPORTANT' in red, and a red curved line. The rest of the alignment page was empty. It is a C4680 printer. All about the printer seemed normal before the black ink cartridge has been changed.
@ a_hp_user - HP cartridges come with a warranty as a HP printer. The new cartridge with the problem that you have encountered and then a replacement cartridge fixed the issue, I would say this cartridge was defective.
I'd give HP Technical Support a call on this cartridge of the printer in order to obtain a replacement cartridge.
-
To access the administration page remotely of two interconnected WRT610N?
I'm sure that I've done it before, but I can't remember how. Let's say I have TWO WRT610N which are interconnected...
Router 1
IP: 192.168.1.1
Connected to the modem (Internet)
Remote 8881 value port
DHCP enabled
Gateway mode
Router 2
IP: 192.168.1.2
1 LAN port connected to the LAN port of Router 1 2
8882 value remote port
DHCP disabled
Gateway mode
Now, I want to be able to type the WAN IP address that connects to the Router 1 and be able to access the Router 1 or router 2 admin page.
Thus, for example, say that my WAN IP is 68.96.215.121
Router 1
68.96.215.121:8881
Router 2
68.96.215.121:8882
How can I do this?
Strange. 8882 to 80 single port forwarding should work.
You cannot change the web interface on the side of LAN port. All you can do is disable/enable http and https, which means using the port 80 (http) or port 443 (https). You cannot change the ports.
Why do you need to access the webinterface of the second still? It is not really a lot, that you can change on this one because it is only an access point and the switch...
-
Multiple, partially printed pages on photosmart 2575 since coming to windows 8
Whenever I have print something on my new computer laptop (which is Windows 8, my old laptop was running windows vista), it prints several unfinished copies before you finally print a complete copy.
To try to solve this problem, I have:
- Rebooted printer (running backs)
- Computer restarts
- Disconnected and reconnected usb connection
- Reinstalled the printer drivers
- A ran the doctor printing and scanning
Did somebody solve this problem?
Hello-
There is a document that addresses this issue for XP to Win7. The steps for Win7 should be fairly close to the solution of Win8 to help you solve this problem.
http://support.HP.com/US-en/document/c01892627=
I hope that this will help resolve your printing problem!
-
Hello. I need to create a Web site that will be as a portfolio site. The Web site will have a view of the user, that allows to display all content such as images, videos, etc. In the view of the user, a user can download their images that will be sent to the admin to be checked. I now need a way for the admin to download these new images on the Web site for display. The best option for this would be to create a hidden Admin Panel, and when the admin logs, they are able to download things. Or maybe it would be better to create a kind of separate from the Web site that is somehow related to the location of the user.
Advisor on the best possible route would be appreciated.
See you soon
Nick
I entirely separate the feature functionality of user admin and password to access this section of the site. He didn't need to be on a separate site, but should not be in the same file or folder.
Maybe you are looking for
-
Update my iPhone remove everything, if I do not save it?
If I don't save my IPhone before upgrading to iOS 10 he removes everything that didn't back up?
-
Satellite A105-S4254 - some of the media buttons stopped working
I have a Satellite A105-S4254 and media buttons just left a couple of weeks of work. (Those who control the Windows Media Player).The Web button and the film works, but none of the others. Any help would be GREATLY appreciated!
-
Equium A60: Need new LCD
Hello world There, someone can help me.I have a laptop Equium A60 and my daughter broke the LCD screen. Does anyone know where I can get a new l15"cover or the LCD screen and about how much it costs? Thank you
-
ASUS X53S i7 PC PORTABLE hard drive: WD My Book essential HD material
PC PORTABLE ASUS X53S i7 Hard drive: WD My Book essential HD material NN mi riconosce più HD WD Exsential... mi potete cone disastrous rates ad avere di nuovo it controllo bus...? Grazie
-
It comes with the IPhone4 and updates
I recently updated my Iphone 3 to an IPhone 4, the 3 was sync'd with my PC and 4 with a laptop computer that I feel sold. Now, when I try to sync my IP4 to the PC, I get the following messages; «missing itunes.msi and quicktime.msi files» When I try