Administration page

Similar Questions

• How to open "The workspace Administration Page" on APEX 4.0

  Here is the page I need ("Workspace Administration Page"):
  http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/aadm_hm.htm#BABGGCHA
  
  And it's the opening page:
  http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/aadm_hm.htm#BEJDGBBJ
  
  But if I followed these instructions I get from "Instance Administration Home Page":
  http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/adm_roles.htm#BABHADJI
  
  How to open "workspace Administration Page"?

  Hello

  Connect on your own is not INTERNAL, work area with the user who is Administrator of the workspace.

  Kind regards
  Jari

• I want to have the administrative page on my site

  Basically I want on the administrative page on my site

  
  who has a field of text and when you enter the text in this box
  It updates the text on the homepage or anywhere where it is specified
  and I don't know the best way to do this
  I know how to do this using flash objects, but I'm not sure it's the best way
  I was hoping someone could help me or point me in the direction of a good tutorial
  Thank you for taking the time to read

  > I do not know how to pass the

  > variable to the page, it must be on

  You do not pass really the value of the form directly to the page on which it should appear.

  You need to store the data somewhere on the server. Usually, this is accomplished with a database, but it could also be stored in the file system. The simplified process goes like this.

  Data are entered into the form and the form is sent to the script on the server side

  Script processes the data and stores it in the database

  Other pages read the value from the database and display the data

• No administration page of coldfusion 8

  Hello, I downloaded coldfusion 8 developer editionn, ran the download, followed the process to the end.

  the dose of administration page will not load. Something on the page cannot load, no server. I had set up as a local host 8500

  I tried restrat the coldfusion application server 8 manually, but it fails, error 1053, server is Word respone to request.

  Don't know what to do next? I am running windows xp with service pack 3, can anyone help?

  yayasworld wrote:

  Hi ok! got that, now I get another error,

  Cannot access c C:/coldfusion8runtime\lib\wsconfig.jar

  Don't know what that means.  Should I start over?

  I suspect that you have specified your dir CF somewhere like C:/coldfusion8 rather than C:\coldfusion8\.  Because the path, it should be looking is C:\coldfusion8\runtime\lib\wsconfig.jar.

  --

  Adam

• Cannot access administrator Page

  Coldfusion (6.0UP3) on a Web server from iPlanet on Solaris platform running.
  
  When you try to connect to the Coldfusion Administrator Page (CFIDE/administrator/index.cfm) the errors log receives the following error message:
  
  [1] java.lang.SecurityException: unable to configure CERT for certification approved
  to javax.crypto.b. < clinit > ([DashoPro - V1.2 - 120198])
  .................
  
  I read that the problem could be resolved with a hotfix or upgrade to coldfusion. I can't patch or upgrade of this system. You have any ideas?
  
  

  Determine the path to the latest version of the J2JRE segment that is installed on the web server (note that the name of the directory can change with each new version) by running the following command:

  Edit the opt/coldfusion/runtime/bin/jvm.config file.
  Change the java.home entry in the file from:
  Java.Home=/opt/ColdFusion/JRE to: java.home=/opt/J2JRE_1.4.2_06/ replaced by the path to the most recent segment for example path opt/J2JRE_1.4.2_06/ J2JRE.
  Step 5:Save the file.
  Step 6:Remove the default Java Runtime Environment:
  rm - rf/opt/coldfusion/jre / *.
  Step 7: Restart ColdFusion:
  restart the /etc/init.d/ColdFusionMX

• Starting in Windows XP, SP3 without getting automatically the Administrator page

  When I boot (Windows XP, SP3), I get only page of the administrator, in spite of the fact that my wife and I have accounts on the machine.   If I disable the administrator account, I can get the page showing the two user accounts, but only after I was interrupted by a warning that the administrator account has been disabled, and that I should ask for help to get it repaired.   My wife and I are administrators full.   How to repair the machine to start showing the choice of my wife and my account, disable the administrator account, or receive warning messages in the Adminitrator of s is disabled?   Thank you.

  Hey Kanga85,

  Have you tried to create an account without password and leaving just as option. That should clear the error. Follow the steps below to do so.
  You can also start in SafeMode in XP Mode and create a new user account.
  1. connect to the account without password.
  2. go in user accounts.
  3. create a new account with a password adminastrative.
  4. exit and restart in normal mode.
  5. sign in using your new account name & password.
   
  If it wasn't the answer you are looking for please just re - ask your question. I didn't know if the mistake is to your question or you want to bypass the login screen.
  Thank you!

• RV016 access to the modem in wan1 administration page, wan 2... from LAN

  Hello

  We have installed router rv016, balancing 5 adsl conections.

  We can access the router rv016 with IP 192.168.1.1 LAN.

  We can access the administration modem1 page in wan1 which has IP 10.0.0.1

  But we cannot access other pages of Directors of modems as fitted wan2 IP 10.0.0.2, or modem wan3 with IP 10.0.0.3, modem wan4 or wan5...

  In the diagnosis of rv016 page, we can make a successful ping 10.0.0.1, but not to another wan...

  All modems have active DHCP ok with access authorization.

  Can you help us?

  Thank you!

  Hello

  Change modems to get LAN IP addresses in different subnets:

  10.0.0.1

  10.0.1.1

  10.0.2.1

  10.0.3.1

  10.0.4.1

  Then, everything should work perfectly.

  Please mark this thread as answer or reply if you have any additional questions.

  -Marty

• Locking a Coldfusion instance administration page

  I've been looking around and can't find the answer anywhere.  I have a web site running on an instance of coldfusion, which became a problem because you can join the admin (www.domain.com/cfide/administrator/index.cfm) page that is causing a security problem.

  Of course, we changed the default passwords for all accounts by default but will hide this page from viewers outside.  Since it is the way in the administrator of this forum how to lock this down?

  You have two options

  1. use the security provided by your web server (Apache or IIS) to restrict access to the admin of the site.

  2 remove the pages from the admin of your production web server.

  See this article from Adobe.

  http://kb2.Adobe.com/CPS/172/tn_17254.html

• Application administration page is not accessible

  I recently installed Oracle database Express edition 10g. This went well. I finished the tutorial creating an application using Oracle 10 g Express edition database without any difficulties. Then I started with the Application Builder User Guide. Page 1-7, it tells me to log in Oracle Application Express Administration Services in order to create a workspace. This however does not.
  I can go to the home page of Oracle Database bij typing: http://127.0.0.1:8080 / apex in my browser.
  However, if I type apex / http://127.0.0.1:8080 / apex_admin, by following the instructions in the guide, I get an error message: could not find Web page.
  
  Please tell us what to do

  Listen me... forgotten doc (you will use for APEX 3.x documentation, but if you can't see the field work space you use Apex 2.2) but in this case, you can go to sites of Directors here:

  http://127.0.0.1:8080/apex/f? p = 4550:10 and configured only
  user: ADMIN
  Password: password_for_your_admin_page

• Partial administration page [WAG200G]

  Hello

  I wanted to reuse my old WAG200G lately because my box had blown.

  I did a full reset, as recommended on the Linksys site:
  http://KB.Linksys.com/Linksys/UKP.aspx?pid=83&app=VW&VW=1&login=1&JSON=1&docid=0309948f53854b47950d7...

  However, when I try to display the configuration of the modem, the page appears half like the screenshot:
  

  The browser runs in a loop. If I click on other pages, it works but other pages are blocked:
  

  Tested on IE and Chrome.

  I also used the original CD to initialize the modem, but there is an error.

  If you have an idea, I'm interested.
  Thank you in advance.

  Hello ygrakes. Are access you the user of the interface or cable on the WAG200G wireless? Have you tried to access (user interface) using another computer? If you do not have another computer, try to set this computer to static IP, powercycle the computer and try to access the interface again. Just to cover all bases, its best if you clear the cache of historical navigation of the browser as well. As a last resort, do a hard reset (1 full minute) and try again. If all else fails, one can assume that the firmware of the gateway that is perhaps already damaged.

• To access the administration page remotely of two interconnected WRT610N?

  I'm sure that I've done it before, but I can't remember how. Let's say I have TWO WRT610N which are interconnected...

  Router 1

  IP: 192.168.1.1

  Connected to the modem (Internet)

  Remote 8881 value port

  DHCP enabled

  Gateway mode

  Router 2

  IP: 192.168.1.2

  1 LAN port connected to the LAN port of Router 1 2

  8882 value remote port

  DHCP disabled

  Gateway mode

  Now, I want to be able to type the WAN IP address that connects to the Router 1 and be able to access the Router 1 or router 2 admin page.

  Thus, for example, say that my WAN IP is 68.96.215.121

  Router 1

  68.96.215.121:8881

  Router 2

  68.96.215.121:8882

  How can I do this?

  Strange. 8882 to 80 single port forwarding should work.

  You cannot change the web interface on the side of LAN port. All you can do is disable/enable http and https, which means using the port 80 (http) or port 443 (https). You cannot change the ports.

  Why do you need to access the webinterface of the second still? It is not really a lot, that you can change on this one because it is only an access point and the switch...

• Administrative user page shows programs like "unknown application" in Vista

  My administrative user page does not correctly load upward.  Only 10 processes are running, and in the file associations of programs together many extensions are listed as "unknown application".  Open none of the shortcuts on the desktop, I have only the "open with:" dialog box.  All other pages the user on the computer to work properly. They have all more than 60 processes running and no other problems.  It is only with a user page, and that is be the administrative page.  I tried startup repair, but nothing has changed.  Diagnosis showed no problems.  Restoration has not changed anything.  Any suggestions, anyone?

  Hi Marty Clune,.

  1. are you able to connect to other accounts without any problems?

  2. remember you to any recent software or changes to the material on the computer before this problem?

  Given that you tried to repair startup and restore the system and always faced with problems, you can try creating a new account manager and check if the problem occurs or not.

  Note: Do not give the username for the user account.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

• What happened to my opening page with links to my most frequently used sites that I use to ride on a dashboard of Wordpress in one click!

  My Firefox's normal opening page disappeared. I is a page with about 12 Web pages in the small windows that are links to my frequently used sites. Some of them are the Wordpress administration pages, and I need them to access my sites. How can I get this page back?

  Another change is the persistent presence of Ask.com on each search engine. Where did this come from? I n ' [t or Ask.com. Is this something that Mozilla added in? If so, it's a bad idea. I used Google to search for and want my opening page of Firefox pet back on the opening of Firefox.

  Thank you very much for the help. Susan

  Looks like you picked up a piece of Malware change your homepage .

  https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-caused-malware

• Firefox update prevents access to the NAS web page

  Firefox is the likely cause of the web administration of a Buffalo Linkstation Live 1 TB network attached page being inaccessible storage device.

  This has happened

  Each time Firefox opened

  is every attempt to open the NAS web administration page after that Firefox updated to level to 3.6.6

  With some effort, this has been resolved. and it is the browser of the cause.

  Test with configuration as a result of security changes made no difference to the outcome of the error reported. It took uninstalling internet security suite to expose Firefox as being the cause. The default settings have been the "use system settings" option in the tools/options/advanced/network Panel. I never had the opportunity to change something in this space, because I started using Firefox, and when I installed the Sep 09 NAS, access via FF using the ip_address was the norm.

  However, when you attempt to connect using FF to the security suite 'not there' a proxy not responding error occurred, which was the point on the cause. The FF network Commission review, a manual selection of the proxy server and if no proxy for local connections was the required patch. He continued to work after security suite has been reinstalled. A jpg of this working configuration image is attached.

  In the last 6 months FF suffered a number of updates. One of those - most likely 3.6.4 or 3.6.6 - changed something in FF mode of local network connection management. In which case the same ip addresses in the address bar previously authorized were no longer allowed - all without talking to the user in the update until the condition occurred in operations.

  This is the second time a mozilla product did that for me, on the automatic update, and I'm upset that a good product may be contaminated by defects of design and testing in this way. Updates automatic for FF and TBird are off my calendar. If the effects of the end of a change are not complete and explained in detail - I don't use it. the pain of the errors that it is caused is considerable.

  Davidk

• Nighthawk 7000 activate https / ssl connection to the internal administration

  Dear community,

  I want to change the administration page to browser http to https (port 443). The only thing I found is the ability to open https for external administration.

  I want to stop sending the admin to the router plaintext password in my home network. Is it possible to configure https for administration?

  If there is no safe way for the router configuration using wlan how to configure you there safely (with the direct help of cable attached to the router)?

  Best regards

  Mark

  As far as I KNOW, there is no way to activate https for internal administration. The assumption is that you have a reasonable control over devices in your network.

  The way only I can think of to manage your router must turn off the radio by using the physical button on the Wi - Fi connection and disconnect all devices wired the R7000 except for a wired computer.