Partial updates failed - problem utility wget

Similar Questions

• Partial update failed - "copy_partial_update_to_host_MDEXHost_Dgraph1".

  Hello
  
  I get the below exception during execution of a partial update, no idea what could be causing this error? :
  
  [05.27.13 07:56:52] INFO: From partial update script.
  [05.27.13 07:56:52] INFO: Lock acquired "update_lock."
  [05.27.13 07:56:52] INFO: [ITLHost] start Backup utility "backup_log_dir_for_component_PartialForge".
  [05.27.13 07:56:52] INFO: The utility [ITLHost] start shell "move_incoming-updates - NonApp - txt_to_processing.
  [05.27.13 07:56:54] INFO: Utility to copy from [ITLHost] 'fetch_config_to_input_for_forge_PartialForge '.
  [05.27.13 07:57:06] INFO: [ITLHost] start component "" "PartialForge".
  [05.27.13 07:57:09] INFO: [ITLHost] start Utility shell "move_forge-output-AutoZone-sgmt0-records-xml_to_forge-output-AutoZone-sgmt0-records-xml-2013-05-27-07-57-09".
  [05.27.13 07:57:11] INFO: Utility to copy from [ITLHost] 'fetch_partials_to_cumulative_partials_dir '.
  [05.27.13 07:57:11] INFO: Utility to copy from [MDEXHost] 'copy_partial_update_to_host_MDEXHost_Dgraph1 '.
  [05.27.13 07:57:11] SEVERE: Exception:
  
  Caused by java.io.IOException
  org.apache.axis.encoding.ser.BeanSerializer serialize - not nillable 'fromHostID' element is null.
  
  [05.27.13 07:57:11] WARNING: Exception:
  
  Caused by org.apache.axis.AxisFault
  org.apache.axis.AxisFault makeFault; nested exception is:
  java.io.IOException: java.io.IOException: no nillable 'fromHostID' element is null.
  Caused by java.io.IOException
  org.apache.axis.encoding.ser.BeanSerializer serialize - java.io.IOException: no nillable 'fromHostID' element is null.
  
  [05.27.13 07:57:11] SEVERE: Exception:
  
  Caused by java.io.IOException
  org.apache.axis.encoding.ser.BeanSerializer serialize - not nillable 'fromHostID' element is null.
  
  [05.27.13 07:57:11] SEVERE: Error communicating with the agent of the EAC while starting the utility 'copy_partial_update_to_host_MDEXHost_Dgraph1 '.
  Occurred during execution of the BeanShell script 29 line valid:
  [[
  
  26.
  27. partial update to distribute, update Dgraphs
  28. DgraphCluster.cleanLocalPartialsDirs ();
  29. DgraphCluster.copyPartialUpdateToDgraphServers ();
  30. DgraphCluster.applyPartialUpdates ();
  31.
  32. Partial archives
  
  ]]
  
  [05.27.13 07:57:11] BASS: Caught an exception during method call "run" on the object "PartialUpdate. Release locks.
  
  Caused by java.lang.reflect.InvocationTargetException
  sun.reflect.NativeMethodAccessorImpl invoke0 - null
  Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
  com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - valid BeanShell script runtime error.
  Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
  com.endeca.soleng.eac.toolkit.utility.Utility start - communication error with the agent of the EAC starting the utility 'copy_partial_update_to_host_MDEXHost_Dgraph1 '.
  Caused by org.apache.axis.AxisFault
  org.apache.axis.AxisFault makeFault; nested exception is:
  java.io.IOException: java.io.IOException: no nillable 'fromHostID' element is null.
  Caused by java.io.IOException
  org.apache.axis.encoding.ser.BeanSerializer serialize - java.io.IOException: no nillable 'fromHostID' element is null.
  
  [05.27.13 07:57:11] INFO: Lock released "update_lock".
  
  Thanks in advance!

  Hello

  Check if you have these items correctly configure AppConfig.xml

  and the Dgraph details for the update dir

  ./data/dgraphs/Dgraph1/dgraph_input/updates

  Thank you
  Dev

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• Problems installing OS Driver Pack (secure process Update Failed)

  We have a problem when trying to install the 'OS Driver Pack' (R720_Drivers-for-OS - Deployment_Application_HK41X_WN64_15.02.12_A00.) (EXE) to our server Dell PowerEdge R720.

  After executing the facility and 4 minutes in the process, we get ' failed to update: secure update process has failed. "Restarted the server several times. The server is already patched with the latest bios and firmware.

  _________________________________________________________________________________

  BIOS information
   
  Reference of the manufacturer Dell Inc.
  Version 2.5.2
  Release Date 28/01/2015

  Firmware information
   
  Name iDRAC7
  Version 2.15.10.10 (Build 8)

  Firmware information
   
  The name of the lifecycle controller 2
  Version 2.15.10.10

  V8.1.0.1 Dell manage Open Server Administrator

  __________________________________________________________________________________

  However another R720 server with the same specifications and environment correctly updated, but the only difference that there was here, we had a previous installation and the initial prompt was

  The version of this update Package is newer than the currently installed version.
  Name of the software application: OS, 7.2.1.4, A00 Driver Pack
  Package version: 15.02.12
  Installed version: 7.2.1.4

  Where, as in one where there is the problem, the initial prompt is

  Any version of this update Package is currently installed.
  Name of the software application: OS driver Pack
  Package version: 15.02.12

  _______________________________________________________________________________

  The event log generates this error!

  The description for event ID 6049 source Dell - system update can not be found. Or the other

  the element that triggers this event is not installed on your local computer or the

  installation is corrupt. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be registered with

  the event.

  The following information has been included in the event:

  \R720_Drivers-for-OS-Deployment_Application_HK41X_WN64_15.02.12_A00. EXE - SCH

  \schsadministrator
  Reference Dell OS Driver Pack, 15.02.12, A00
  C:\ProgramData\Dell\UpdatePackage\log\\R720_Drivers-for-OS-

  Deployment_Application_HK41X_WN64_15.02.12_A00.txt
  Exit code = 1 (failure)

  the message resource is present, but the message is not in the string/message table

  _________________________________________________________________________________

  We tried all means and are currently unable to address this issue. Someone has met the "process Secure update failed" and managed to solve it. It would be much appreciated!

  Hello I have just had the similar problem and found another post where a guy nicknamed gud JobLink posted a solution, it worked for me, hope it works for you.

  en.Community.Dell.com/.../19648154

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• problem with partial update on linux

  Hello
  
  When a partial update is executed every time, the siz of the process dgaph in memory increases about 200 MB. Initially when just ran the update of the base, the siz of the dgraph was about 1 GB, but after a few partial updates the memory went up to 2.5 GB dgraph. However we have not inserted/updated during the partial run, each updates were in 50 records. If the dgraph is restarted, then the siz of the process boils down to 1 GB. Also after the partial update, query response time is also get degraded.
  
  Please let me know someone has encountered this problem and also the solution that you can recommend.
  
  Thank you
  RP

  The script of global warming is essentially a script replay queries frequently used to your dgraph to warm the cache. One way to get commonly used queries is to analyze your logs of application of production dgraph. You would like to experiment the number of queries that you use in your global warming script to install in your partial window of 20 minutes.

• Problem after update failed

  Hello world
  today after a failed update my double D6633 Z3 does not start.

  The message "the software update failed. Make sure that your phone is connected to the computer and try again. "flashes on my screen.

  The issue is that PC companion can not find my phone. I tried all my USB ports but still does not work.

  Have you any suggestions?

  Thank you

  You may need to perform a repair of software using PC Companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 60% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• 6.7 update failed, now of big problems!

  Tried to update my copy of Lightroom 6.4 but the update failed. I got a sign saying: check the error log, but I do not appear to have one!

  Worse still I don't see new imports as there is now no preview available when I try to import.

  Worse still it seems that I can't work with any of my already usable raw files now, as it says the file format is not supported!

  I am running Windows 7 and have been successfully importing photos from my Fuji camera for more than 6 months.

  He does!

  I tried the update from inside the program with my anti-virus off and it worked. I now have Lightroom version 6.7.

  Deep joy.

• Firefox 31 update fails

  There is nothing different, but FF started again and the update succeeded. This is after more than a dozen attempts.

  Automatic update fails, but gives no reason. Tried a manual update (Firefox Setup 31.0.exe) and it does not work? I tried running in administrator mode and nothing seems to happen (?) ...

  When I click on '?' (help) / about and the updated... application message continues to turn and run for a LONG time, and then prompt to restart. I do, and you receive error message that the partial update cannot be applied... He will try an update complete. It loads and executes the full update and then displays a message "update Application" without end. After several minutes of nothing happens, I x'd out and I'm still on exit 30, with the message to reboot again.

  Running Windows 8.1

  To date, Firefox continues to the failure of the upgrade to version 31. I'll try to manually disable all my Add-ons and see if that helps. Well, it did work.

  Tried running FF in "safe mode"... It also did not work.

  I noticed that when asked to "restart FF", the tabs looked a little weird... square is the only way to describe it. The upper right minimize output window icons were also "cut in half". Very weird.

  Another problem. In my download directory, I have now three executable files that I can NOT REMOVE. Says they are in use by another program. Looked at the running processes to all and do not plant anything that it is focused on running FF. Tried rebooting the PC did not run FF and still cannot delete
  The installer of Firefox 31.0.exe
  Firefox Setup Stub 31.0.exe
  Firefox_Setup_31.0.exe (this installer downloaded from cnet).

  From now I use Chrome since I don't know what is happening with FF. I'll check back every day to see if there is a solution. I have not tried to uninstall FF and then re - install. I understand that I should be able to save all my settings, so I could try in a week if I don't see a solution.

  Do not know how to 'close' my problem, so I answer to myself. Updated at 31 and next. Don't know why, but my problem was apparently solved.

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• Windows updates fails with an error 56 c

  updates fail to install due to above error

  Hi Oldeuph,

  A. updates you trying to install?

  B. What is the exact error code or error message?

  C. When is failure to update?

  D. what version of windows are you using?

  E. you try to install the updates through the automatic or manual updates?

  Try to find the exact error code.

  1. click onStart. Type windows update in the start search box and press on enter.

  2 click onview update history.

  3. right click on the update failed, and then clickview

  If you are running windows vista, you can try to reset the windows update components by running a FIXIT from the link below.

  http://support.Microsoft.com/kb/971058

  Windows 7 provides a built-in utility that can automatically find and fix some problems with Windows Update.

  • Open the Windows Update troubleshooting tool by clicking the theStart button, then clickingControl Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. UnderSystem and security, clickFix problems with Windows Update.

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Try to install updates and check if you are able to fill. If it fails, you can manually download the update and install it.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update fails with the error 'WindowsUpdate_0000057E '.

  I have windows vista, but my microsoft office is 2002.

  For the latest updates of the week 2 windows keep failing.
  1 security Update for Microsoft Excel 2002 (KB959988)
  2. Update for Office XP (KB933388)

  Whenever the update fails, I get the error "WindowsUpdate_0000057E".

  I'm not good with computers and need help on how to fix this...
  

  

  When you try to download an ActiveX control, install an update to Windows or to a Windows component, install a service pack for Windows or to a Windows component, or install a Microsoft or third-party software, you may experience one or more of the following symptoms:

  • You may receive the following error message when you try to install a program or update:
    Digital signature not found
    The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been changed since then, it has been tested.
    The software you are about to install does not contain a Microsoft digital signature. There is therefore no guarantee that this software works correctly with Windows.
    Package name
    If you want to search for Microsoft digitally software signed, refer to the Windows Update Web site at http://windowsupdate.microsoft.com to see if one is available.
    Do you want to continue the installation?

    If you click Details, you receive the following message is displayed:

    Microsoft Windows
    The signature on the software package you want to install is not valid. The package is not signed correctly.

    After you click OK in the first error message dialog box, you may receive a message that States that the installation was successful, or you may receive the following error message:

    Name of the Update Package
    The cryptographic operation failed due to a local security option setting.
  • When you try to install an update or to install a service pack, you may receive an error message that is similar to one of the following:
    • Name of the Update Package
  
  The Setup program could not verify the integrity of the file Update.inf. Make sure the cryptographic service is running on this computer.
• Failed to install catalog files.
• The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important).

  This software will not be installed. Contact your system administrator.

• The software you are installing has not passed Windows Logo testing to verify its compatibility with this version of Windows. (Tell me why this testing is important).
• When you try to install a service pack Windows XP, you may receive an error message similar to the following:
  Service Pack 1 Setup could not verify the integrity of the file. Make sure the cryptographic service is running on this computer
• When you try to install Microsoft Data Access Components (MDAC) 2.8, you may receive an error message similar to the following:
  «"" "INF. cause installation failure: the timestamp signature and/or certificate could not be verified or is incorrect.»»»"
• The %WINDIR%\System32\CatRoot2\Edb.log may reach 20 megabytes (MB) even though the file is typically less than 1 MB.
• When you try to install a package from the Windows Update Web site or the Microsoft Update Web site, you may receive a message that is similar to the following:
  The software has not passed Windows logo testing and will not be installed.
• When you examine the file % systemroot%\Windowsupdate.log, you should see an entry for one of the following errors:
  • 0 x 80096001
  • 0 x 80096005
  • 0 x 80096010
  • 0x800B0001
  • 0x800B0003
  • 0x800B0004
  • 0x800B0109
  • 0x8007F0DA
  • 0x8007f01e
• When you use Microsoft windows update on a Windows XP-based computer, the update process may fail and you may receive an error message "0x8007f007". This can happen regardless of what type of update you select.

The Svcpack.log file may contain entries that are similar to the following:

937.406: GetCatVersion: failed to retrieve version information from C:\WINDOWS\system32 \CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Tmp.0.scw.cat with error 0 x 57 937.437: GetCatVersion: failed to retrieve the version information of C:\WINDOWS\Tmp.0.scw.cat with error 0 x 80092004 940.344: InstallSingleCatalogFile: failure failed for Tmp.0.scw.cat; error = 0xfffffbfe. 940.344: DoInstallation failed failed: STR_CATALOG_INSTALL_FAILED 955.125: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2 955.125: DoInstallation: has no cancellation of registration of spuninst.exe for recovery. 962.656: cancel registration of uninstall-> Windows Server 2003 Service Pack, 0 962.656: impossible to install catalog files. 1448.406: message displayed to the user: cannot install catalog files. 1448.406: user Input: OK 1448.406: Update.exe extended error code = 0xf01e 1448.406: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.
Back to top

CAUSE

This problem may occur if one or more of the following conditions are met: Log...
This problem may occur if one or more of the following conditions are met:
• Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
• Cryptographic services is set to disabled.
• Other Windows files are corrupted or missing.
• The timestamp signature or the certificate cannot be verified, or is incorrect.
• The hidden attribute is set to the folder %windir%, or one of its subfolders.
• No unsigned installation behavior group policy setting (Windows 2000 only) is set to do not allow installation or warn, but allow installationor the policy of binary value is not set to 0 in the following registry key:
  The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
• The group policy enable trusted publisher lockdown setting is turned on, and you do not have the appropriate certificate in your trusted publishers certificate store. This group policy setting is under User Configuration, under Windows settings, Internet Explorer Maintenance, under Security, under Authenticode settings in the Group Policy MMC snap-in.
• You install Internet Explorer 6 SP1 and the update of security 823559 (MS03-023) is installed. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
  828031 (http://support.microsoft.com/kb/828031/) error "the software you are installing has not passed Windows Logo testing...". "message when you try to install Internet Explorer 6 Service Pack 1
• The software distribution folder is corrupted.
Back to top

RESOLUTION

To resolve this problem, use the following methods. Once you perform the operations...
To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

Back to top

Method 1: Rename the Edb.log file rename the Edb.log file, and then try again to install the program. To rename the Edb.log file, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following command and press ENTER:
   Ren %systemroot%\system32\catroot2\Edb.log *.tst

Back to top

Method 2: Set the Services of cryptography on AutoSet to automatic Cryptographic Services and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

1. Start the Administrative Tools utility in control Panel.
2. Double-click Services.
3. Click Cryptographic Services, and then click Properties.
4. Click Automatic for Startup type, and then click Start.

Note Windows 2000 does not list Cryptographic Services in the SERVICES Administration utility.

Back to top

Method 3: Rename the folder Catroot2 rename the Catroot2 (Windows XP and Windows Server 2003 only) folder and then try to install the program again.

Note Skip this method if the operating system is Windows 2000.

To rename the Catroot2 folder, follow these steps:

1. Click Start, click run, type cmd, and then click OK.
2. At the command prompt, type the following commands and press ENTER after each line:
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
3. Remove all tmp*.cat to the following folder:
   % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

   If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

Back to top

Method 4: Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 /u softpub.dll
   regsvr32 /u wintrust.dll
   regsvr32 /u initpki.dll
   regsvr32 /u dssenh.dll
   regsvr32 /u rsaenh.dll
   regsvr32 /u gpkcsp.dll
   regsvr32 /u sccbase.dll
   regsvr32 /u slbcsp.dll
   regsvr32 /u mssip32.dll
   regsvr32 /u cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

3. Restart your computer.
4. Click Start, click run, type cmd in the Open box, and then click OK.
5. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 softpub.dll
   regsvr32 wintrust.dll
   regsvr32 initpki.dll
   regsvr32 dssenh.dll
   regsvr32 rsaenh.dll
   regsvr32 gpkcsp.dll
   regsvr32 sccbase.dll
   regsvr32 slbcsp.dll
   regsvr32 mssip32.dll
   regsvr32 cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

6. Restart the computer.
Back to top

Method 5: Remove the hidden %windir%\System32 and its subfolders attribute

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands, pressing ENTER after each line:
   attrib s h % windir %
   attrib s h %windir%\system32
   attrib s h %windir%\system32\catroot2

output
Back to top

Method 6: Set a strategy without driver signature silently succeed if you are running a version of Windows 2000, set the silent success no unsigned installation behavior group policy setting. This group policy setting located under Computer Configuration, under Windows settings, under security settings, under local policies, under Security Options in the Group Policy MMC snap-in. If you are running Windows XP or a later version of Windows, this group policy setting is no longer supported. In this case, follow these steps to resolve this problem:

1. Click Start, click run, type regedit, and then click OK.

   Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

2. Locate and then click the following key in the registry:
   The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
3. Right-click on the Policy binary value, and then click change.
4. The value data will appear in the following format:
   0000 02

   Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

5. Click OK, and then quit the registry editor.
Back to top

Method 7: Temporarily turn off Trusted Publishers Lockdown and install the certificates to your trusted publishers certificate store you can continue to use the group policy enable trusted publisher lockdown setting, but you must first add the certificates in your trusted publishers certificate store. To do this, disable the group policy enable trusted publisher lockdown setting, install the certificates in your certificate and then trusted publishers store on the setting of group policy enable trusted publisher lockdown again. To install the certificate suitable for Microsoft Windows and Microsoft Internet Explorer updates, follow these steps:

1. Download the product of Microsoft update you want to install from the Microsoft Download Center, the Windows Update Catalog or the Microsoft Update Catalog. For more information about how to download updates from Microsoft Download Center, click the number below to view the article in the Microsoft Knowledge Base:
   119591 (http://support.microsoft.com/kb/119591/) how to obtain technical support files from Online Services Microsoft

   For more information about how to download updates from the Windows Update Catalog, click on the number below to view the article in the Microsoft Knowledge Base:

323166 (http://support.microsoft.com/kb/323166/) how to download updates that include drivers and hotfixes from the Windows Update Catalog
• Extract the package to update product in a temporary folder. The command line that you use to do this depends on the update that you are trying to install. View the Microsoft Knowledge Base article associated with the update to determine the command line switches appropriate that you will use to extract the package. For example, to extract the 824146 security for Windows XP update to the C:\824146 folder, run Windowsxp-kb824146 - x 86 - enu - x: c: \824146. To extract the 828750 security for Windows XP update to the C:\828750 folder, run q828750.exe/c t:c:\828750.
• Right click on the file KBNumber.cat to the package to update product to the temporary folder you created in step 2, and then click Properties.

  Note The KBNumber.cat file may be in a subfolder. For example, the file may be in the C:\824146\sp1\update folder or in the C:\824146\sp2\update folder.

• On the Digital Signatures tab, click the digital signature and then click Details.
• Click view certificate, and then click install Certificate.
• Click Next to start the Certificate Import Wizard.
• Click place all certificates in the following store, and then click Browse.
• Click approved publishers, and then click OK.
• Click Next, click Finish, and then click OK.
Back to top

Method 8: Check the status of all certificates in the certification path and import missing certificates or damaged from another computer to verify certificates in the path of certificate for a Windows or Internet Explorer product update, follow these steps: step 1: Verify Microsoft certificates

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, double-click Microsoft Root Authority. If this certificate is missing, go to step 2.
4. On the general tab, make sure that the dates valid from are 10/01/1997 to 12/31/2020.
5. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.
6. Click OKand then double-click the NO LIABILITY ACCEPTED certificate.
7. On the general tab, make sure that the dates valid from are 11/05/1997 to 01/07/2004.
8. On the Certificate path tab, check whether the certificate has expired or is not yet valid or this certificate is OK appears under certificate status.

   Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

   293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
9. Click OKand then double-click the GTE CyberTrust Root certificate. You can have more than one of these certificates with the same name. Check the certificate that has an expiration date of 02/23/2006.
10. On the general tab, make sure that the dates valid from are "23/02/1996-02/23/2006."
11. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

    Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
• Click OK, and then double-click Thawte Timestamping CA.
• On the general tab, make sure that the dates valid from are "31/12/1996 to 12/31/2020."
• Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

Step 2: Import the missing certificates or damaged if one or more of these certificates are missing or corrupted, export the missing certificates or damaged on another computer, and then install the certificates on your computer. To export certificates to another computer, follow these steps:

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, click the certificate you want to export.
4. Click export, and then follow the instructions to export the certificate as a DER encoded Binary x.509 (.) REB) file.
5. Once the certificate file has been exported, copy it to the computer where you want to import.
6. On the computer where you want to import the certificate, double-click the certificate.
7. Click install Certificate, and then click Next.
8. Click Finish, and then click OK.
Back to top

Method 9: Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

1. Remove all tmp*.cat of the following folders:

   systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

   systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

2. Delete all the kb*.cat files in the following folders:
   % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
   % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
3. Remove all the oem *. * files in the % systemroot %\inf folder.
4. At the command prompt, type the following commands. Press ENTER after each command.
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
5. Restart the installation of the patch failed or the installation of the service pack.
Back to top

Method 10: Empty the software distribution folder

1. Click Start, click run, type services.msc and click OK.

Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

• In the Services (Local) pane, click automatic updates, and then click stop.
• Reduce the Services (local) window.
• Select all the contents of the Windows distribution folder, and then delete them.

  Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

• Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
• In the Services (Local) pane, click automatic updates, and then click Start.
• Restart the computer, and then run Windows Update again.
Back to top

Method 11: Perform an upgrade on site for more information about how to perform an upgrade on the spot, click on the number below to view the article in the Microsoft Knowledge Base:

315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP
Back to top

MORE INFORMATION

For more information about a resolution that is intended for Windows 2000 only.
For more information about a resolution that is intended for Windows 2000 only, click on the number below to view the article in the Microsoft Knowledge Base:
281458 (http://support.microsoft.com/kb/281458/) error message when you install a service pack Windows 2000 or product update
This problem has been reported to occur with the following updates:
328310 (http://support.microsoft.com/kb/328310/) MS02-071: a failure in management of Windows WM_TIMER messages may allow elevation of privileges
810565 (http://support.microsoft.com/kb/810565/) of the hyperlinks open in Internet Explorer instead of in default browser or Help and Support Center
327979 (http://support.microsoft.com/kb/327979/) game stops responding (hangs) or when the introductory video is played
322011 (http://support.microsoft.com/kb/322011/) you cannot preview a fax in the Fax Console
811630 (http://support.microsoft.com/kb/811630/) HTML Help update to limit functionality when it is invoked with the window.showHelp method)
810577 (http://support.microsoft.com/kb/810577/) MS03-005: a buffer uncontrolled in the Windows Redirector may allow elevation of privileges
329441 (http://support.microsoft.com/kb/329441/) you cannot create a network connection after you restore Windows XP
329170 (http://support.microsoft.com/kb/329170/) MS02-070: a flaw in SMB signing may permit group policy to change
810833 (http://support.microsoft.com/kb/810833/) MS03-001: buffer uncontrolled in the Locator service may allow code to run
For more information about configuring automatic updates in Windows XP, click on the number below to view the article in the Microsoft Knowledge Base:
306525 (http://support.microsoft.com/kb/306525/) how to configure and use automatic updates in Windows XP

Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Several updates fail with 0x8007001F

  Windows XP, 2699988 and 2632503 updates fail with 0x8007001F error code. He had 11 updates fail, manually installed microsoft.com/download 10, but could not be the last of them. Follow-up of the diagnoses of FixIt to manually reset Windows update, the re-registration of the DLL and clear the distribution of software with several stop folder net start commands, no solution.  Added an optional update and it did not. Tried several profiles and reboots.

  The user has installed Real Player about two weeks ago. Symentec Endpoint Protection started Pavilion virus after that. Do you have a manual removal of Real Player. Scanned and cleaned with MalwareBytes and seven. No other problems not reported except this problem of Windows Update.

  I paid $49 for support chat. Anoop representative quicky identified a rootkit virus. Fixed with Kapersky anti-rootkit utility TDSSKiller and complete a reset of settings IE. One of the symptoms that identified, he was Manager of disc appears not all discs. Closed question.

• Windows updates fails with the 0X8007F064 error code

  Title: Windors update fails with Ox8007F064 failure code.

  This is a cumulative update for ActiveX Killbits for Windows XP.  I have tried Microsofts avenues and attach it to the M..  I ran Spyware, Malware and I continue to get the message that I have to update Windows, but it won't and gives me the Ox8007F064 fault code.  I can't find information about this code or help at this stage.

  Hello

  -What is the FIXIT have you tried to solve this problem?
  -Respect the limit with the specific update? If so, what is the update's KB number?
  -Did you do changes on the computer before this problem?
   
  Method 1: Run the Microsoft FIXIT from the link and if the problem persists.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP?
  http://support.Microsoft.com/kb/322756/
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows XP?
  http://support.Microsoft.com/kb/322756/
  Note: You can ignore the 7 method to perform the upgrade in-place.

  Method 3: If the problem persists, I also suggest that you install the updates in clean boot mode and check.

  Step 1: I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  How to configure Windows XP to start in a "clean boot state"?
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. Click Startand then click run.
  2. Type msconfig and click OK.
  
  The System Configuration utility dialog box appears.
• Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
• When you are prompted, click restart to restart the computer.

Step 2: Try to install the updates manually and check.
http://www.Microsoft.com/en-us/download/Windows.aspx?q=Windows&WT.mc_id=MSCOM_EN_US_DLC_ICONNAV_121LSUS007799

For reference:

Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

http://support.Microsoft.com/kb/906602

To update history:
(a) click Start.
(b) click on all programs, then select Windows Update.
(c) select view update history.
 
Hope this information helps.

• Service Pack 3 update fails error file ntkrnlpa.exe is open or in use by another program

  Original title: Service Pack 3 update fails

  I'm trying to update windows xp with service pack 3. I have download the update. When I try to install, the update fails with an error message"
  "File ntkrnlpa.exe is open or in use by another program", when no programs are running... Why?, he said.

  My stops to update SP3 and I cannot resolve the error message, how can I fix it?

  Hello
  Try the methods provided below and check if the problem persists.
  Method 1:
  This problem may occur if some third party software interferes with the installation of Windows XP SP3.
  Click on the link provided below for more information on how to set up your computer in a clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  (a) click Start and then click Run.
  (b) type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK. When you are prompted, click on restart to restart the computer.
   
  Method 2:
  
  Download the update manually, and then install it.
   
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  
  http://www.Microsoft.com/download/en/details.aspx?ID=24
  See also:
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717