Unknown problem when trying to print - Windows 7, ok on IE

Similar Questions

• Adobe Reader 10.1.3 crashing when trying to print, Windows 2003 server 64-bit (Citrix/Terminal srv)

  I'm running 9 servers Citrix with about 300 daily users.

  Servers are running Windows Server 2003 64-bit, with Citrix Presentation server 4.5.

  Since the last time that I've updated (Adobe Reader, Flash Player and Windows updates), he had a problem when you try to print from Adobe Reader.

  First of all, I have installed Adobe Reader 10.1.2 and when users tried to print, then planted program.

  Then I tried the upgrade to Adobe Reader 10.1.3 and the same problem occurred.

  Then I tried downgraded to the same 10.1.0,.

  Finally, I tried and old version 9.5 and again, I get the same error.

  I also tried to disable the protected mode, nothing works.

  No matter what I do, I always get this crash when you try to print.

  The funny thing is, if I do a new install of Adobe Reader 10.1.3 then printing works fine, until users connect to the server.

  Then it will work ever again, unless I have do a reinstall.

  The program crashes when you type preferences.

  Help!

  I've now changed my PDF Reader Foxit Reader on my servers and everything works great.

  Thank you very much Adobe!

• Error code 80070005 when trying to update Windows using Windows 7 Home Premium

  I am running Windows 7 Home Premium, upgrade from Vista on a Sony Vaio VGN-FW350D. The upgrade was promotional as part of the purchase of the laptop in the Canada.

  I had no other pressing issues which have not been resolved. IHAVE run the built-in Windows based Registry Cleaner (like a cleaner 'free') and the dreagmenter of disk as part of the troubleshooting process.

  I have tried everything I can find on the setting of the following problem:

  When trying to update Windows (ie. Download updates of security or Microsoft security patches, etc.), the following is displayed: "Windows could not search for new updates - an error occurred when searching for new updates for your...» Code 80070005. It gives you the 'Try Again' button, but who does not work either.

  Also, after running in a Fixit 'Microsoft' by default and aggressive modes, change my registration to God knows what state by applying other methods proposed CIHI, now when I try an update of Windows, the "last check for updates '"and updates have been installed"the both indicate '' never. '' BTW, I have the restore points before you make these changes, so no worries there.

  I would like to point out that, as far as I know, this problem has persisted since January 1, 2011, when I downloaded and installed Microsoft Security Essentials, which would not update or another. Before installing MS Security Essentials, I ran Avast, I have re-installed after removing Ms Sec Ess.

  In short, Windows update does not work, giving Code 80070005. Can anyone help solve this problem with me? Thank you...

  Ralph

  Hello

  Error code 80070005 means generally that you're not quite allowed to install updates.

  If the problem persists, follow the steps mentioned below and the Coachman.

  Step 1:

  All first please confirm that you have logged on to an account with administrative privileges.

  To connect to the administrator account

  a. Click Start, right click on computer, then click on manage.

  b. expand local users and groups, and then click the users folder.

  c. right-click on the connection of the administrator, and then click Properties, and then remove that checking the account is disabled.

  Now, restart the computer and log on to the administrator account and try to update again.

  Step 2:

  You could disable your anti-virue and malware/spyware protection temporarily to see if they are contradictory with the update.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3:

  Uninstall Security avast software, install the update day, then reinstall Avast.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• error code 0x80073cf9 when trying to update windows store applications in windows 8. in particular applications of microsoft corp. (travel, weather, bing news, sport...)

  I am still getting error 0x80073cf9 when trying to update windows store applications in windows 8. in particular applications of microsoft Corp. (travel, weather, bing news, sport...)

  How can I solve this problem? Help, please.

  Check if you have the C:\windows\AUinstallAgent file on time is the most likely the cause of your problem all this register * will not help recreate the directory if missing takes 10 seconds and no technical support

• When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader.  This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall a

  That's happened?   When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader. No idea how or why this has happened. This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall and reinstall Acrobat Reader a few times.  With Acrobat Reader installed now I can't open my browsers or other files that has changed.  With Acrobat Reader uninstalled icons are appropriate and I can open the browsers, but other files may not always be open.  What happened, and what I can do to use Acrobat Reader again and also use my browsers and open the other files?

  You have tried to download Windows Explorer?

  In any case, this might solve your problem: Application, file icons change in Acrobat/Reader icon

• I have a HP pavilion and when turned on when trying to start Windows, it happens with ERR2ERR3 please can you me what could be wrond

  I have a HP pavilion and when turned on when trying to start Windows, it happens with ERR2ERR3 please can you me what could be wrond

  It could be a faulty hard drive.

  Can you press F10 after turning on and you to the diagnostics menu to run the test of the car?

• activation error when trying to activate Windows 7

  Hello

  Now, I get an activation error when trying to activate Windows 7. Buy Dell laptop in 2011 with 64-bit, immediately downgraded to 32-bit. I reinstalled a couple of times as 32-bit over the years as ultimate and reinstalled as 64-bit last week.  The phone activation option is no longer accessible. MGADiag output are:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - X92GV - V7DCV-P4K27
  The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
  Windows product ID: 00426-OEM-8992662-00400
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {3C9B801E-13E4-4367-A27C-8F2B4747B3C1} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.110408 - 1631
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {3C9B801E-13E4-4367-A27C-8F2B4747B3C1}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-P4K2700426-OEM-8992662-004002S-1-5-21-111267970-249754281-3898313640Dell Inc.. Inspiron N5010 Dell Inc.. A10 20101117000000.000000 + 000AD753107018400FC04090409Time(GMT-08:00) Standard Pacific03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600400-02-1033-7601.0000-2762015
  Installation ID: 019180836386553581766085500053098341535002602530844375
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: P4K27
  License status: initial grace period
  Time remaining: 35520 minute (s) on (24 day (s))
  Remaining Windows rearm count: 4
  Trust time: 14:45:19 10/03/2015

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAIAAgABAAEAAQABAAAAAgABAAEA6GG6HpRUr4CoQoiCNCliOo3v6ppgDV6QXF0 =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  SSDT AMICPU PROC
  WN09 DELL SLIC
  OSFR DELL M08

  I'm always in grace period, but any help appreciated.

  Louis c

  Strange that Ultimate would come preinstalled as it is normally only Home Premium.

  Try to open an elevated command prompt type slui 4, follow the instructions to make the robocall.  If it fails, stay on the line to talk with activation agent.

  Otherwise, you will need to contact Dell.  They must have sold you a special Ultimate OEM disc at some point?

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem: Restart loop everything when trying to install Windows 7

  I tried to install windows 7 on my laptop Pavilion dv4t 1400 [64 bit] and it froze while he was completing installation. I shut down the computer and tried to restart it. Now, I turn it on and it starts as windows 7, then goes to a screen that indicates the set of services [or something like that] then it goes back to the beginning. I tried almost everything, and I fear that my computer is in ruins. = (If you please help!

  You have tried to start with 7 DVDs and start over? Delete all partitions and create a new.

• Problems of trying to pass Windows Update, Microsoft Update

  I have a pretty annoying problem. Usually, when you go to Windows Update, you can turn on updates for other Microsoft programs. You click on the little link on the right side of the screen, which opens a new window. You click on the 'OK' button, go to 'Continue', and then it loads a new page where an ActiveX message appears at the top of the screen. Usually, you can just click on it and choose to install the program. But this is where my problem begins.

  As soon as the new page opens, it freezes. Sometimes it will work long enough for me to Start to see the Active-X popup, but will freeze instantly. Wait a few minutes, and the page becomes a 'Web page' error saying that IE closed the page to protect my computer, because apparently a "defective or malicious add-on" caused problems. I've never had this problem before. I tried to get this to work for more than a week now. I thought I found a way around it, because when I installed Silverlight today, he let me use Microsoft Updates. But now, when I go on my page of regular updates to my list of all the programs, it has the same spirit of problems control Active-X gel page.

  Does anyone know what I can do? At the moment, I have no way to get the manual updates because of this problem.

  Despite the presence of Avast, that at least "feels" a hijackware infection symptoms. YMMV.

  Can assume us that Windows Firewall is enabled at all times?

  If we put aside 'switching to Microsoft Update' for the time being, do a CUSTOM Windowsupdate scan? If so, can you install critical updates of security offered?

  NOTE: If an update of the certificate root is listed in the optional software updates category (on the left sice), always opt to install it to enjoy greater security of IE8. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error 0x8080CBB1 when trying to install Windows Xp

  I tried to install Windows Xp when all of a sudden a blue screen with error message "IRQL_NOT_LESS_OR_EQUAL" with the code STOP: 0x0000000A (0x00000002, 0x00000000, 0 x 00000065, 0x8080CBB1) rises and impossible to complete the installation.

  Hello

  This problem may occur if there is incompatible hardware or an incompatible device on your computer driver.

  Refer to this article for help:

  Error message "Stop 0x0000000A Irql_Not_Less_or_Equal ' during the upgrade to Windows XP
  http://support.Microsoft.com/kb/311564

  See also:

  
  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I get the error code 80080005 when trying to update windows

  While searching for updates using Windows Update, I get the following message from Windows Update error 80080005:

  Windows could not search for new updates
  An error occurred when the new updates for your computer.
  Error (s) found:
  Code 80080005 Windows Update encountered an unknown error.

  I have windows vista home basic service pack 2

  System type 32-bit operating system.

  Hi Lee,.

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According the description, you are unable to install the Windows updates as you get error 80080005.

  1. you are looking for any specific update?

  2. did you of recent changes to the computer before the show?

  I've provided methods to fix the Windows Update the question. Carefully follow each method. If a method does not work, go ahead with the methods following to solve the problem.

  Method 1: Run the fixit available in the link below to reset windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Now, you can try to install these windows updates fails manually from the link below Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 2: Turn the computer in a clean boot state in order to verify the conflicting application. Try to install the updates:

  You can manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Method 3: Follow the instructions in the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note 1: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Note 2: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Note 3: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• no pilot of the aircraft were found when trying to install windows 7 on a new construction

  It is a new construction: card mother Asus M4A87TD/USB3, Phenom X 4 965 processor he's, with 1 64 GB Soild State drive which is where Windows 7 Pro must be installed, Raid 2 500 GB SATA hard drives that I use, total 8 GB memory Dual Channel DDR-1600 and an ATI Radeon HD5830 1024 GDDR5 video card.

  I am now trying to install windows and I get an error message saying that no device drivers found when you try to install windows 7 pro, so I tried to put in the disc that came with the motherboard because that's what I found during my research on this subject and it won't read the disc. I also learned that I should use a USB however, I don't have a large enough to copy documents from the disk device drivers.

  Any input would be appreciated because I was a machine now for a week only to find what I wanted and then in construction and now this problem - please help

  Suggest you only begin by installing a configuration non-RAID first. Also since this is a new construction, you need to do some test equipment to verify that you don't have a hardware problem. Connect a SATA drive to a standard SATA connector rather than the RAID connector.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use any automatic overclocking BIOS features, Intel EIST or Turbo Mode (turn off).
  then back at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.

  First try running Memtest86 +:  It runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Check the manufacture of graphics card download site: Download and install the latest drivers for Windows 7
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Error when trying to activate Windows code: 0xc004e003

  I had Win 7 Ult 3 2 bit and I wanted to install 64-bit. Did a clean install. Used the original key to install and it only will not activate, error trying to actilvate windows. Code: 0xC004E003. When I look to the top of this code, it refers to the error of activation for Vista? Ran Diagnostics and have a copy of the report. Where should I send the report?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us