Partitions of disk utility 2 combined with data loss

Similar Questions

• EL Capitan - impossible to resize the partition in disk utility

  I'm having a problem with resizing the partition of my drive (background: I have 2 partitions, 350g for mac and 150g for bootcamp) I want to resize the mac one in order to free up space.

  in normal startup, disk utility tells me target disk is too small. startup recovery, he says 'successful' but nothing happens.

  any tips?

  See this topic Support of Apple

  Disk utility (El Capitan): partitioning a physical disk

  'Expand volume '.

  If you have several volumes on a device, and one of them is running out of space, you will be able to expand without losing the files it contains.

  To enlarge a volume, you must delete the volume that comes after him on the device, and then move the end point of the volume you want to enlarge in the freed space. You cannot expand the last volume on a device. »

• external hard drive partition in disk utility impossible

  on El Capitan, disk utility does not a new external hard drive partitioning.

  When is this corrected?  Is there a work-around.

  With I TB seagate drive and I cannot partition?  It is not useful.

  Marilyn

  Mac mini end of 2014 2.6 Ghz Intel core i 5

  8GB memory

  El Capitan

  Of course, it does.

  Select the drive:

  

  Set how many partitions:

  

  Click on the Add [+] button once for each partition that you want to add. You can set the size using the size field.

  Before you start to complain about something, it would be wise to get your facts straight.

• Cannot start Bootcamp, after you have added the partition using disk utility

  My question is similar with repair Boot Camp after having created the new partition.

  recently I install the el capitan + windows 7 (using bootcamp), everything works fine after I add the third partition. (I anticipate the third partition will be use for dropbox, for mac and windows can sync-ing a dropbox for each folder).

  After I've done the third partition and restart the system, I want OPTION and found no windows.

  My mbp spec:

  MD101 2012 13 ",

  SAMSUNG 850 PRO SSD 256GO,.

  16 GB RAM,

  elcapitan OS x + windows 7 ultimate.

  Thank you

  Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• How could resize this partition in disk utility? (see image)

  I want to resize the partition selected, but I can't drag it to the bottom.  Any way to resize?

  

  Your screen capture, you must delete the partition OSX 10.9. The space would be free and you can then develop your OS x 10.10 partition or create a new one from the free space. The only one of these two who seem to be able to resize is the OSX 10.9 partition because it has the grab bar (lower-right) and free space further to slide down.

• With data - loss question mark reversed

  Hi people,
  
  Linux - 11.2.0.2.0
  
  When I try to insert special characters (' € @, etc.), it turns out as question mark reversed or some unwanted values.
  
  NLS_CHARACTERSET = WE8MSWIN1252
  
  Please suggest on the same.
  
  Thank you
  KSG
  
  Published by: KSG January 11, 2012 20:50

  KSG wrote:
  Srini,

  Yes, the mab issue be with the app/jdbc driver (driver newest is used).

  Now suspicious lossy data are perhaps because of the database being upgraded to 11 g, using imp/exp (without csscan).

  Exp/imp will not result in data "lossy" condition that the process ran correctly - in fact, it's the recommended way to change charactersets. See http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#CEGCHGIJ.

  Is there a reason exp/imp has been used on the DBUA preferred method for the upgrade?

  My web application runs on Java. There is a field "note" in the application, when some NOTE are back extract, it appears with undesirable characters (upside down question mark points, #53 @, etc.). The note field can be typed with any language like french, English and other.

  PL specify exactly how you 'see' data - through the app through SQL * Plus, through SQL Developer, or in some other way?

  At the end of the database. I create a table and insert special characters. When I retrieve the data through sql, absolutely no problem. The data are very good.

  Yet once, pl specify exactly how you 'see' data.

  The problem arises when data is inserted at the end of the application.

  Thank you
  KSG

  How the application connects to the database?

  HTH
  Srini

• Can you change Apple ID Email with data loss?

  My question is as stated above: can I change my ID Apple email or will that make me lose my music, movies etc?

  can I change my Apple ID email

  Yes.

  See this--> change your Apple - Apple Support ID

  or will that make me lose my music, movies etc?

  N °

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• Recovery gone HD and Bootcamp starts rained after the Mac HD reduction in disk utility

  With the help of El Capitan, mid-2012 17 "Unibody Macbook Pro Non-retine

  Hi, I am trying to disable SIP with csrutil but I can't use this method in the recovery mode. Why? I had a problem where I have narrowed my Macintosh HD partition in disk utility and now my Bootcamp partition became start older (data still there).

  I was going to fix the partition table that caused problems with the boot, but when I loaded the Recovery Mode the thing wouldn't start and cling to a completed loading bar (with the apple logo, it took a lot of time to get the bar too full).

  So, I deleted the recovery partition HD and reinstalled OSX to retrieve. Problem is, he does not come back. Right now I have 4 partitions - disk0s1 is EFI disk0s2 is Macintosh HD disk0s3 is Untitled (free space), disk0s4's Bootcamp.

  Is it possible to UN-mess-up my hard drive without losing data? Sorry!

  ShinkoNet wrote:

  With the help of El Capitan, mid-2012 17 "Unibody Macbook Pro Non-retine

  Hi, I am trying to disable SIP with csrutil but I can't use this method in the recovery mode. Why? I had a problem where I have narrowed my Macintosh HD partition in disk utility and now my Bootcamp partition became start older (data still there).

  I was going to fix the partition table that caused problems with the boot, but when I loaded the Recovery Mode the thing wouldn't start and cling to a completed loading bar (with the apple logo, it took a lot of time to get the bar too full).

  So, I deleted the recovery partition HD and reinstalled OSX to retrieve. Problem is, he does not come back. Right now I have 4 partitions - disk0s1 is EFI disk0s2 is Macintosh HD disk0s3 is Untitled (free space), disk0s4's Bootcamp.

  Is it possible to UN-mess-up my hard drive without losing data? Sorry!

  The way is to not lose data have a current backup plan in place.  How to create a clone of startup

  SIP is the Protection of the integrity of the system and is a security featutre is not supposed to be cancelled esp of the 'system' you are primed to which would frustrate the object, so it must be done in an another boot drive - in your case.

  Your best bet is maybe to start int Internet recovery - this is done by now the keys option command R to reboot.  And go from there.

• error message on disk utility

  I have OS X El Capitan, version 10.11.2.  I tried to open disk utility to perform repairs because I get the message error 'you cannot use the "Disk Utility.app" application with this version of Mac OS X. You have a 'Disk Utility.app"11.1. "How can I get to work disk utility?

  I am trying to run the utility disk to see if it needs repairs because when I try to save a word document I get another pop up "Word has insufficient memory." He asks me if I want to save the document under failback.   If I click on Yes, I receive another message which reads "Word cannot save...".  Please close a window"and so on.

  I would appreciate any advice to one of these messages.

  If you run El Capitan, then you have chosen the wrong version of disk utility. You need one that would be installed by El Capitan. If you run Yosemite, and then you attempt to start the El Capitan. In my view, 11.1 is the version of Yosemite. Check on the Mac to check that you are running El Capitan. If you are, then you must reinstall so you will have its own version of disk utility.

• Disk utility will not let me click on the partition.

  I've updated to El Capitan, disk utility since refuses to let me click on partition.

  Accidentally, I partitioned my disk flash before I updated and so I need to cancel, because now I have 200 MB of storage on it.

  I tried using terminal but I have been unable to fix this way, too.

  Can someone help me with this?

  Thank you

  Make sure that all your files are backed up. Accidents happen and I'd hate for you to lose all data.

  Are you trying to repartition the boot disk? If I understand correctly, your hard disk is currently partitioned, and you need to recover a single correct hard drive?

  You can't repair the disk hard while you use the hard disk. To get the partition on a single disk, boot from the recovery disc.

  Restart the computer and press immediately on and hold command-R until you see a loading bar, and then release the keys. Once the recovery disc starts, choose your language (if it asks you to) and then again open disk utility. Now, select your hard drive and delete the extra partition. It should tell you "this will not affect your files...". "but if he says that you will lose all data, STOP. Make sure that you remove the extra partition without data on this subject. I'm guessing that it's called "Untitled 1" or something that affects unless you named it something different.

• Disk utility OSX not letting u/c partition names

  I recently changed the HARD drive on my Macbook Pro to a crucial SSD 1 TB.  At the time I thought that the HARD drive was faulty so used the Mac online recovery to reinstall the original OSX (Mountain Lion).  When I appointed the SSD partition it only let me use the upper case for the name of the partition.   I had already improved Cougar to the Mavericks so there were a few problems with some on application data, so I decided to do a new install directly from Time Machine.  This good all looked and noticed that Time Machine renamed partition SSD the original name of the disk partition HARD and that this name was a mixture of upper case and lower case letters.

  After that, I decided it would be useful to have a second external USB backup drive, but for the second disc I tried to partition the drive into three partitions all formatted in Mac OS X extended (journaled).  More utility disk once only would allow me to only use capitals in partition names.

  Since OSX is happily using the partition with uppercase letters and lowercase names I'm puzzled what disk utility is forcing me to use uppercase letters.  The only thing I can think is that SSD and USB disk could have been previously formatted with FAT32 and it was inhibiting the disk utility.  Does anyone have ideas better?

  Here's the new disks that are not configured for Macs. Follow these steps:

  Drive partition and format

  1. open utility disk from the Applications\utilitaires folder.

  2. after disk utility charges select the new SSD entry (this is the entrance Out-bumpy with of the mfgr.) ID and size) in the list on the left. Click the Partition tab in the main window of disk utility.

  3. in the title of the Volume entitled plan set the number of partitions in the menu drop-down one. Click the Options button, set the GUID partition scheme, and then click the OK button. Set the type of Mac OS extended (journaled) format. Click on the apply button and wait until the process is complete.

  Repeat for the USB drive.

• Disk utility was unable to repair the Time Machine USB2 external HARD disk partition?

  Hello.

  My client has problem with its USB2 500 GB Seagate FreeAgent Go since early 2010. There 2 partitions: FAT32 and HFS (for most Time Machine backups). After connection and enter its password valid successfully, it takes a minute to set up, and then a message that says "OS X cannot repair the «...» "You can still open or copy the files on the disk, but you cannot save changes to the files on the disc. Back up the disk and reformat it as soon as you can. "I ran disk with their verification utility. Both are problems with "invalid sibling link" and said the repair option. However, this repair option is grayed out.  So, is it not possible to fix it with free software on the disk except for the reformat?

  I used two different 15 "MacBook Pro (Mac OS X v10.8.5/Mt. mid-2012 lion and v10.10.5/Yosemite of the early 2013) with the same results, is not the MacBook Pros. http://imgur.com/a/OW0s6 for a couple screen
  s (shooting/capture) of Mac OS X v10.10.5/Yosemite. I also tried disk on its FAT32 partition checks, and found minor problems. They were repairable too unlike the encrypted HFS partition.

  Thank you in advance.

  Disk utility can't repair an error of invalid sibling link. You use Disk Warrior that assuming that the disk is always good. Otherwise, you will need to save what you can then reformat the hard drive. Exactly what the error message said.

• Cannot use disk utility to create the partition of the free space on the external USB drive.

  I have a red 3 TB Western Digital drive in a USB hard drive docking station.

  The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).

  The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.

  I checked free space on the drive with my Windows machine:

  
  DISKPART> list disk
  
  Disk ### Status Size Free Dyn Gpt
  
  -------- ------------- ------- ------- --- --- 
  
  Disk 0 Online 167 GB 20 GB
  
  Disk 1 Online 465 GB 0 B *
  
  Disk 2 Online 2794 GB 1526 GB *
  
  DISKPART> select disk 2
  
  Disk 2 is now the selected disk.
  
  DISKPART> list part
  
  Partition ### Type Size Offset
  
  ------------- ---------------- ------- -------
  
  Partition 1 Reserved 128 MB 17 KB
  
  Partition 2 Primary 1267 GB 129 MB 
  
  DISKPART>
  

  DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.

  I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.

  Here are a few screenshots:

  ... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):

  

  ... of the NTFS volume in disk utility:

  

  ... of information for the drive in disk utility:

  

  ... of information for the NTFS volume in disk utility:

  

  ... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):

  

  

  I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.

  In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.

• Burn a DVD with "disk utility".

  Before El Capitan (10.11.2), I was able to burn a DVD using "disk utility".  Here are the instructions that I used.  Disk utility has now a new version Version 15.0 (1511.3) and the statement no longer work.  Can anyone update these instructions?

  Copy DVD

  Follow these instructions to make a copy of your DVD unprotected:

  Insert your DVD into your Mac. Most Macs will automatically launch the DVD player. Once he starts, he gave up. You should see your DVD drive mounted on your desktop.

  Open disk utility (Applications > utilities). Select the DVD drive in the list on the left. You will notice that there are two DVD icons - select the one slightly indented (this is the DVD itself, while the first is the drive).

  Click on "New Image" in the main window of disk utility.

  Choose a name and a destination in the window "Save as...". ». Don't forget that your destination should have enough space to copy the whole DVD, which can be more than four concerts.

  In the window "Save as...". ', to ensure that the selection 'Format of Image' is set to ' CD/DVD Master' and the selection of "Encryption" is set to 'none '. Click Save.

  After you have copied the DVD in your destination drive, return to disk utility. Your new disk Image will appear in the list on the left side of the disk utility window. The original disc of DVD on your Mac.

  Insert a DVD disc that is accessible by writing in your Mac. Select your disk Image created in the list on the left side of the disk utility window. Click on "Burn" in the main window of disk utility. Choose your burn speed and if you want to check the data burned.

  You will receive confirmation once you the DVD are engraved with success and you are all set with a new copy of your DVD drive. Just save your new disk Image and you can make a copy whenever you may need.

  That is right. Apple has removed this feature FROM.

  You can do it from the Finder

  http://osxdaily.com/2015/11/22/burn-disc-images-OS-x-Finder/