Pass arguments of variable length to an another variable length arguments

Similar Questions

• Passing arguments to the script

  Hello

  I have created a dialog box load the files in the folder and when I click the button I run another script of command StartScript (...)

  How can I pass arguments to the script (the paths of files)?

  Thank you

  Hey OzShimon,

  As long as you use a tiara predefined global variables (T1, T2,...)  you'd be fine. You can also define user variables (.) SAV files) or even to declare your own global variables with: call GlobalDim ("Myname").

  These variables are not re-initialized until you restart the script engine. So just change 'obj' for T1 your test should work

  ' Dim obj

  Void Button1_EventClick (ByRef This)

  T1 = "Hello World".

  Call ScriptStart("C:\Users\Oz\Desktop\test.vbs")

  End Sub

  * the script code (test.vbs):

  Call MsgBox (T1)

  Kind regards

  Javier

• How to passing arguments to an exe

  Hai Everbody

  I know that LabVIEW has the ability to call an exe file created in different platform, can I know how to pass arguments to the special exe (which is located in another platform) via LabVIEW... I wish someone could help me out of this

  Thanks for your answers, I found the solution... As the exe is in .net, I used the syntax for the command line arguments in .net...

• Pass the timeline variable to one of my classes!

  Hello!
  The title says it all.

  I need to pass a boolean variable is set to false for one of my classes called "Edit".

  It is passed to true when one of the functions of this class is managed.

  I tried a few ways different, but had no luck.

  Someone has an idea?

  If you instantiate the class in the timeline panel, you can simply call a method in the class - passing the variable as a parameter.

  easyGame.setTimelineVar (myVar);

  And have another method that allows you to retrieve the value:

  myVar = easyGame.getTimelineVar ();

• You need to pass arguments to the Sub - VI which runs in parallel to the main vi.

  Please help me.

  I can pass arguments to a subvi using "call-by-reference-node" but the sub - vi will not work in parallel.  I can also run my sub - vi in parallel using "invoke the node", but then cannot pass arguments.  I can't understand how to merge these two concepts.

  When I open the reference VI, I specify the strict type, using call-by-reference-node.  When I use call node, I don't specify the type.  It seems that specifying the type strict guard screw run in parallel, but also seems necessary to pass arguments.

  I apologize for my absence of a deeper understanding of this and appreciate any help you can give me.

  Chris

  You must invoke 'Ctrl Val.Set' node.

• I need to pass command-line variables in a file - remoteapp.rdp

  my normal program outside the remote desktop would be

  R-A123456 program.exe

  I could not pass command-line variables in the file program.rdp.

  Program.RDP R-A123456 does not work.

  from the program.rdp file

  replacing the shell: s. ProgramName

  remoteapplicationprogram:s: | ProgramName

  gatewayhostname:s:

  remoteapplicationname:s:ProgramName.exe

  remoteapplicationcmdline:s:

  Help

  Server 2008 R2

  XP Professional SP3

  Hi John,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Category of the Windows Server

• passing the value of the item to another page

  Hello!
  
  I have a few questions while passing the value of the item to another presentation page and page refreshes.
  
  I have a page (page n ° 2) with more areas where users can fill data in some articles (text box, popups,...), then I have a region report report and button to enter a new item. When users, click the button is it redirects to another page (page no. 21), where the user enters the values to other elements (popup, text box,...) then I have 3 buttons on this page ('Cancel', "create one", "create an and create another") and now I don't know how to handle the button ' create a. Action for the button "create one" I want is that when button "create one" is clicked in a table (in my DB) should be inserted some values of page 2 and certain values on page 21, then users should be redirected to page 2, where you can see everything that you see before the user has clicked 'enter a new element button' (so all the values in the elements of the page 2 must be visible) + in this report in the region must be updated (so you can see the inserted elements on page 21)
  
  I hope you understand what I mean and you can help me. And sorry again for my English.
  
  Kind regards
  Dragan

  You can create a collection and use it in this way:

  IF apex_collection.collection_exists ("YOUR_COLLECTION") = TRUE THEN
  apex_collection.delete_collection (p_collection_name-online 'YOUR_COLLECTION');
  END IF;
                           
  apex_collection.create_collection (p_collection_name-online 'YOUR_COLLECTION');

  -Value added to the collection
  apex_collection.add_member ("p_collection_name-online 'YOUR_COLLECTION', p_c001 => ' value to save");

  -get the value of collection
  Select C001 in apex_collections where collection_name = "YOUR_COLLECTION";

  Go through this link to learn more about the collections http://docs.oracle.com/cd/E17556_01/doc/apirefs.40/e15519/apex_collection.htm

  OR

  as you say if its only id you want to perform, then simply create an item hidden in your page 2 =>: P2_ID_SO, then capture the value in your 2 page deal and use it in page 21.

  -Manu

• How to pass arguments to the SQL Script in command prompt

  I don't know about the ' & nom_de_variable "to request a value in the command line.
  
  But, how can I pass arguments from the command line for the following script to the command - prompt
  
  Example:
  
  ex_proc. SQL
  
  CREATE OR REPLACE PROCEDURE ex_proc (employee_id NUMBE IN)
  IS
  v_emp_id Number (38);
  BEGIN
  
  v_emp_id: = employe_id;
  
  UPDATE emp_employee SET sal = 2000 WHERE emp_id = v_emp_id;
  
  END;
  /
  
  
  call_ex_proc. SQL
  
  Appellant for procedure above:
  
  BEGIN
  
  ex_proc (100); -The employee id is 100.
  
  END;
  /
  
  Here are the General controls that we use to run the scripts above-
  
  SQL > @ex_proc.sql
  
  SQL > @call_ex_proc.sql
  
  
  
  But my requirement is to pass the employee id as an argument in the command line as.
  SQL > @call_ex_proc.sql 100
  
  Is it possible to pass command line arguments?

  Usually this question start with reading documentation, wouldn't it?

  Solomon Yakobson showed you the method gross and unreadable.

  You will use best

  set = '& 1' '.

  -use & in the rest of the code

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• Passing arguments to a custom class of MC constructor

  I have problems with the Builder for a custom class linked to a MovieClip library.

  I have a MovieClip in my library called circle, which is related to the com.shapes.Circle class. I want the contstructor of class circle to take 2 arguments, xScale and yScale:

  public function Circle (xScale:Number, yScale:Number) End Sub

  However, if I try to call it from code, for example ball circle = new Circle (3.14,2.0); , I always get a 'number of Incorrect arguments. Waiting 0 " error.

  Is it possible to have a custom class linked to a MovieClip that can take arguments, or Flash not allow this? I had asked about this before and thought I figured out, but look at it now, I apparently had not thought of it and has resorted to a workaround sloppy; I'm hoping to fix now.

  Library items cannot have constructor arguments, because the user can drag on the stage and in this way has no way of passing arguments. If you wat to initialize instances, define public void init() where you can add as many arguments as you want.

• Passing an associated variable number between 'for' loops and functions?

  Hello

  I seem to have a problem with the information how variables can be passed between functions and tables.

  I have variable 'capture' put in place as a number.

  grab var: number;

  My intention (I'll do my best to explain) must have a number 'attached' to catch when it is mentioned for the first time in this function, itemClick.

  These must be all relevant tables:

  clickItemArray = [scene_Camp.wood, scene_Ax.ax]

  itemUsableArray = [wood2, ax2]

  ...

  sceneGuyArray = [scene_Camp.guy_Camp, scene_Ax.guy_Ax]

  function itemClick(event:MouseEvent) {}

  for (grab = 0; enter < clickItemArray.length; grab ++) {}

  If (clickItemArray [type] .hitTestPoint (mouseX, mouseY, true)) {}

  addEventListener (Event.ENTER_FRAME, itemRemoval);

  sceneGuyArray [grab] .gotoAndPlay ("guy_Notice");

  trace ("guy_Notice");

  }

  }

  }

  I would like to have the number in place with grab (it would be a 0 or 1, clickItemArray, sceneGuyArray and itemUsableArray) can be passed on to the next function, itemRemoval. I was hoping to use variables I can use the same function for some point clicked on. For example, if the clickItemArray was point 1 (the axe), then sceneGuyArray [Enter] would be = 1, and would play the right frame. Number 1 would be transferred to the itemRemoval function, where he would constantly be listening to sceneGuyArray [1] also (where '1' would have been obtained through the initial 'grab' in the first function) and react accordingly.

  function itemRemoval(event:Event) {}

  for (var grab2:uint = grab; grab2 < sceneGuyArray.length; grab2 ++) {}

  If (sceneGuyArray [grab2] .currentLabel == 'guy_NoticeDone') {}

  removeEventListener (Event.ENTER_FRAME, itemRemoval);

  trace ("cheese");

  }

  }

  }

  I can't get the track works well. I don't know I'm doing something wrong with 'for' loops or the stated case.

  Naturally, help would be appreciated.

  then, in itemClick(), use:

  Grab = itemClickArray.IndexOf (Event.currentTarget)

• question about passing arguments

  I want to just make sure it's fair from what I understand. Within the legacy, the data type passed as arguments to the method must be of the reference type. Example is shown below

  class A { }
  class B extends A {
  1. A x = new B();  // x is a *reference variable* of class A and it points to( refer to) an *object* of class B
  2. blabla(x)           // invoke a method below
  3. public void blabla(A y)
  }  

  In line 3, the argument type must be A.otherwise, the compiler will complain
  However, if we change the code a bit:

  class A { }
  class B extends A {
  1. B x = new B();           // x is a *reference variable* of class B and it points to( refer to) an *object* of class B
  2. blabla(x)                    // invoke a method below
  3. public void blabla(A x) 
  }  

  The code still works too because the type of x is B and B's, then we can say that x is A legacy when switching from x to the blabla (a x) method.
  Please correct me if I make a mistake. I understand that
  
  Published by: starting on October 27, 2010 12:47 AM

  I think you're on the right track, OP. However, you will get ploymorphic real powers of your method of blabla() if it has been defined in class a. rather than be defined in the B class.

• Design example of a different process pocess and passing arguments

  Creating instance of process of a different process:
  
  I have two different processes: Main_Flow (id: MainFlow) and Second_Flow (id: SecondFlow). In the first process, I read a csv file. Each line of the file contains four columns. After reading each line, I open the Second_Flow and pass the data read from the file. (Pls find the code below for the whole process):
  fileReader = FileReader(arg1: fullFileName); filename is a file type and file name and path
  Java.Io.BufferedReader reader = BufferedReader(arg1: fileReader);
  
  String str;
  countLines int = 0;
  
  While ((str = reader.readLine ())! = null)
  {
  strColumn = str.split (delim: ",");
  
  int ColumnCnt = 0;
  While (ColumnCnt, 4)
  {
  definition of variables
  String appNo;
  String custNo;
  String loanAmm;
  String loanDate;
  logMessage ("the column value:"+ ColumnCnt + "is" + strColumn [ColumnCnt] ');
  If (ColumnCnt == 0)
  {
  arrLoanData ['appNo'] = strColumn [ColumnCnt];
  }
  Else if (ColumnCnt == 1)
  {
  arrLoanData ['custNo'] = strColumn [ColumnCnt];
  }
  Else if (ColumnCnt == 2)
  {
  arrLoanData ['loanAmm'] = strColumn [ColumnCnt];
  }
  ElseIf (ColumnCnt == 3)
  {
  arrLoanData ['loanDate'] = strColumn [ColumnCnt];
  }
  arrLoanData ["descriptionArg"] = "AutoInstance:" + formatTime (timeStyle 'now',: Time.SHORT); "."
  arrLoanData ['genByArg'] = 'auto ';
  
  ProcessInstance.create (processId: "/ SecondFlow", arguments: arrLoanData, argumentsSetName: "BeginIn");
  
  ColumnCnt = ColumnCnt + 1;
  }
  countLines = countLines + 1;
  }
  
  (' The code is in Java and not PBL ")
  
  I spend appNo, custNo, loanAmm, and loanDate as arguments. The Argument will be of any type [string]. The argument the name of Second_Flow is "BeginIn". But I don't get anything in Second_Flow.
  
  What can I do in the mapping of the beginning of Second_Flow argument for the argument past (table)?

  the argument "arguments" for the ProcessInstance.create method receives a map of the arguments that the value of the "argumentSetName" argument will receive.
  so, for example, if your second stream has 2 arguments, String name, decimal value and content String() your method call would be:
  ProcessInstance.create (processId: "/ SecondFlow", arguments: {"name": strNameFromCsv, "value": valueFromCsv, "content": ["a", "b", "c", "d"]}, argumentsSetName: "BeginIn");

• It is possible to pass arguments to a VI uses "Open VI reference.

  I am modifying pre-existing code. (I say this, because there are many other ways to work around this problem, but I'm stuck with what I have)

  I have a large project that is compiled into an EXE file.

  Within this project, it uses the 'Open VI reference' in VI that is bundled in the compiled exe file.

  All good, no?

  Well, here's the question:

  Is it possible to include arguments of open type of command line with a "reference VI"?

  Where I can say "Something.vi / Option: Foo".

  

  I tried many variants such as

  ' Something.vi-/ Option: Foo ".

  even tried variations such as

  "C:\MyLVProgram.exe\Something.vi Option:Foo".

  (Interestingly, quite there no error when you do "C:\MyLVProgram.exe\Something.vi" when executing the VI reference opened.)

  This exe is deployed in a system that has only installed the runtime.

  My current environment is LV 8.6.1. (I know it's old)

  It seems that the antiderivative of LabVIEW recognizes only the paths, and in all other cases, I get an error

  Error 1026 to invoke the node in Something.vi-> MakeSomething.vi

  Possible reasons:

  LabVIEW: VI Reference is not valid.

  Any ideas?

  You can only send command line arguments to an executable with the system Exec.  If you want to pass data in VI, then use the asynchronous call with run.

• How to pass arguments to JVM containing spaces on Solaris

  How to pass the value of the JVM Argument containing spaces on Solaris?

  For example, I need to run tests of cucumber and pass the following JVM argument:

  -Dcucumber.options = "features - classpath:com glue, company, projects, steps"

  But I get the following error:

  Unrecognized option:-glue

  Could not create the Java virtual machine.

  Seems that the space after "features" is recognized as a delimiter, even if I put the value in quotes.

  Everything works fine on Windows, but fails on Solaris 5.10.

  Any ideas?

  Thank you.

  Problem is solved. The cause was illogical in quotes in Shell.

  This does not work, she same product works the same string on Windows:

  CUCUMBER_OPTIONS = "-Dcucumber.options =-" $FEATURES_PATH - fit $STEPS_PATH\ "" "

  JVM_OPTIONS = "$CUCUMBER_OPTIONS $OTHER_OPTIONS".

  $JAVAHOME/bin/java org.junit.runner.JUnitCore com.company.project.runner.TestRunner $JVM_OPTIONS

  While this is the case, even the value $FEATURES_PATH-$STEPS_PATH glue is not quoted:

  CUCUMBER_OPTIONS = "glue-Dcucumber.options = $ FEATURES_PATH-$STEPS_PATH.

  JVM_OPTIONS = $OTHER_OPTIONS.

  $JAVAHOME/bin/java '$CUCUMBER_OPTIONS' $JVM_OPTIONS org.junit.runner.JUnitCore com.company.project.runner.TestRunner

• How to pass the PHP variable to menu jQuery Modal popup

  Hello

  Need help to find how to pass a variable in php (which is recovered in a while loop) in a modal window.

  There is a list of users on the page (shown with a while loop), with buttons Remove next to each of them.

  When the administrator clicks the button Delete for that specific user, a modal window appears confirming their action.

  I can't find a simple way to communicate the id of the user to be removed the modal (where the query is performed, once 'Yes to confirm deletion' is clicked).

  I deleted the jQuery, seeing as how this could change how the modal opens and closes.

  This is the modal:

  < div class = "modal" >

  < div class = "modal_wrapper" >

  < div class = "modal_title" > are you sure you want to delete this user? < / div >

  < div class = "modal_content" >

  < div class = "modal_button_no" > n < / div >

  < div class = "modal_button_yes" > Yes, delete it < / div >

  < / div >

  < / div >

  < / div >

  < div class = "delete_btn" > delete user < / div >

  The variable with the user name is:

  $user_id

  Any help would be much appreciated!

  Thank you

  It is a fairly simple procedure. Personally I'm not sure that its worth the effort for a box of administration but good we all have different opinions - there is no wrong or it.

  Suppose that your buttons delete on your page are anchor tags and you have locked down your database of names to create anchor tags. The value of dir below has been inserted via php through loop and is your RegID.

  Delete

  Delete

  Delete

  Delete

  When you click the anchor tag (that class name "delete") opens a lightbox. You also have to collect the value of "dir" at the time the lightbox opens - happening of value to a hidden in the lighbox code entry field.

  The value of the "dir" command is passed to the light table in a hidden form field:

  "You have a delete button in the light table with the class of ' delete_record ':

  Delete the record

  When the user clicks on the button Delete in the light table the value of hidden form field is harvested and forwarded to your page of delete_record.php via the jquery/ajax script below, were also on the same page.

  Your delete_record.php would look like below, assuming that you use mysqli or if you are using mysql then you would follow the same delete procedure as usual.

  <>

  $conn = new mysqli ('localhost', 'root', 'root', 'name');

  {if ($conn-> connect_errno)}

  echo $conn-> connect_error;

  Die (' sorry, can not connect to the moment, try again later ');

  }

  ?>

  <>

  delete the record

  $record_id = $conn-> real_escape_string (stripslashes (trim($_POST['record_id'])));

  $conn-> query ("' DELETE FROM names WHERE record_id = ' $record_id ' '");

  $record_deleted = "true";

  ?>

  An alert box will appear at the end, confirming that the record has been deleted. You do not have to deploy an ugly alert box - you sends the data to the device of light therapy from the delete_record.php page in a few nice melted in

  If you want to be more subtle about it.