Pass Cisco 871 and VPN to the SBS 2008 Server

Similar Questions

• LegeCy medical application requires administrator rights to run on Windows XP but application resides on the SBS 2008 Server

  Hi all

  Application is a medical Client / Server using SQL in the database model. and resides on the SBS 2008 with XP Server and client computers.

  Rather that to load the client on windows XP, it would not sense to simply run the application console using the Terminal Server services and configure the application to start an hour of connection on. Given that the application requires administrator rights to run, how can I assign admin right only on demand, so when they connect, they can use the application with the given admin rights but do not have access to the rest of the server or control?

  Been awhile and a very little bit of rust, but I know it should be easy... losing sleep reading my series of the voume of support docs... :)

  Hello

  The question you have posted is related to servers and will be well suited in the TechNet community. Click on the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello I get in touch with you because I have passed a Bill, and gave me the bottom three months ago and I want my money thanks

  Hello I get in touch with you because I have passed a Bill, and gave me the bottom three months ago and I want my money thanks

  Hello Monica,.

  Please contact support by calling/chat for claims.

  Contact the customer service

  Kind regards

  Sheena

• Office in distance and VPN at the same time?

  Is it possible to have an office in distance and connected VPN at the same time without installing any additional software?

  It is certainly.

• SBS 2008 - Server 2008 site to site vpn problem.

  Hi all

  I have a box of SBS 2008 I want to add another server to the remote site (standard 2008). Currently, VPN works great on SBS and I can compose anywhere via the pptp network and join.

  I added the RRAS branch again 2008 server role. Connection to the configured application, since VPN was already running on SBS, I just added to the request and the road. Both servers have user names Eric their numbering interfaces to, when I connect branch to SBS, he just connects in seconds, get IP address and routes are added, when I check the SBS it appears as inaccessible, when try to connect manually I either get error RRAS 0 or a pop up says the modem is already in use or not properly configured.

  Grateful if someone can the advice that I've spent 2 days on this.

  Thanx

  If you can repost this thread under http://blogs.technet.com/b/windowsserver/, you can get a lot of fruitful discussions, solutions...

• iDRAC Express and SSO on a SBS 2011 Server

  Hello

  I have a Dell Poweredge R510 running Small Business Server 2011. Holders of SBS that only a single NETWORK adapter connected so my NETWORK adapter has an IP address for the server and a different IP address for the IDRAC Express card that is installed on the box on the same physical port.

  I'm trying to configure the server for SSO and it is unable to resolve the DNS server (which is, of course, the Small Business Server) and therefore ' behind' shared NIC port.

  I can't use the second NETWORK card, because this is not a configuration supported by SM.

  Someone at - it ideas?

  Thank you

  Mark

  Thank you - we're sorted. The TGT error persists, but he connects with the FULL domain name.

• Cannot start OIM_server and SOA_server of the weblogic administration server

  Hello

  I'm stuck with very critical issue, where in I am not able to start the IOM and soa from the weblogic administration console servers. Attach screenshots. Can someone help me to find the problem and fix it. I want to start this servers to the configuration of the Identity Manager Oracle (from the configuration wizard).

  Let me know if I need to check all logs and submit them.

  Any help is appreciated.

  

  

  

  Thanks in advance

  The order should be as follows:

  1 DB, WLS, UCR...

  2. the patches.

  3. create the field. Access to db sources should be tested during this phase (Test JDBC schema component in the wizard window).

  4. secure database store. In your case:

  %MW_HOME%\oracle_common\common\bin\wlst.cmd %MW_HOME%\IDM1\common\tools\configureSecurityStore.py %MW_HOME%\user_projects\domains\oim_dom - IAM Pei m c d create

  Environment variable MW_HOME must be set in the command window or in:

  System - Advanced Properties - Environmental Variables - Variables system - new - name of the Variable: MW_HOME, the Variable value:

  To check:

  Start the new command window (old could be closed)

  Type set | find "MW_HOME".

  MW_HOME = C:\Oracle\Middleware

  5 post stor:

  %MW_HOME%\oracle_common\common\bin\wlst.cmd %MW_HOME%\IDM1\common\tools\configureSecurityStore.py d %MW_HOME%\user_projects\domains\oim_dom m post

  ...

  Info: Validate the operation completed successfully.

  6. start the administration server.

  7. start the server of the SOA.

  8. set the IAM.

  CD %MW_HOME%\IDM1\bin

  config.cmd

  9 configure nodemanager.

  10 departure you servers managed.

  11 create \security\boot.properties file on each server and set the user name and password.

• VM in DMZ and LAN on the same ESXi Server VM

  It is advisable to run two virtual machines on a physical ESXi Server considering only

  a VM THAT is connected to the DMZ (demilitarized zone) and another VM is connected to the local network.

  For example, a virtual machine can be a gateway mail server in the DMZ and

  another VM can be located in LAN mail server.

  ESXi box has multiple network cards, so a single card could be connected to the DMZ and others to the local network.

  Is it dangerous from the point of view of security?

  It becomes really dangerous if you have a virtual machine that is connected to two networks at the same time if not online, there is no way known to cross borders. Other that that, you should be good to go

  Steve Beaver

  VMware communities user moderator

  VMware vExpert 2009

  ====

  Co-author of "VMware ESX Essentials in the data center" virtual

  (ISBN:1420070274) Auerbach

  Come and see my blog: www.theVirtualBlackHole.com

  Come follow me on twitter http://www.twitter.com/sbeaver

  *Virtualization is a journey, not a project. *

• Unable to connect to the internet and VPN in the network.

  I have an ADSL account and when I vpn in our network using cisco VPN 3015 vpn client can't access the internet more locally. I have to use our internal proxy server on the network. Is it possible to make the vpn tunnel but also use the local internet DSL for browsing connection?

  You must set up split tunnelling tunnel, while only some packets are sent through the tunnel, the rest get out in clear packages just as usual.

  In 3015, create a list of network under Config - Mgmt policy - traffic Mgmt - list networks, this list includes your internal networks (you want to be dug traffic). Then go under the group to which the client connects to, on the Client configuration tab, select only the network of tunnels in the list, and then select your list from the drop-down list box. Reconnect and're you good to go.

  Keep in the spirit of split-mining is considered a bit of a security risk because your PC is now accessible from the Internet AND you have a VPN directly in your internal network. If someone can take possession of your PC, then they have access to everything. You can also watch in allowing both client firewall stuff.

• Static and VPN on the external interface

  Hello

  Can someone tell me if it is possible (and if so, how) do vpn enabled on the external interface and to have something like:

  public static x.x.x.x interface (indoor, outdoor)

  IE: I have two addresses ip - one for the router an e0 on the pix. I create a static and lists of access to allow inbound http/https server inside but I also want to allow vpn hit e0 and work. My configs work if I use an ip address 3 for the static, but not if they share. I can imagine that the static method takes the vpn traffic before the pix can use it OR maybe as the pix has no route to the now (due to the static method) that it cannot answer?

  Hope I'm making sense

  Thanks for the time spent on this

  see you soon

  Andy

  I think you want something like this:

  public static tcp (indoor, outdoor) interface http 10.10.10.10 http netmask 255.255.255.255 0 0 (where 10.10.10.10 is your web server)

  public static tcp (indoor, outdoor) interface https 10.10.10.10 https netmask 255.255.255.255 0 0

  access-list 101 permit tcp any host x.x.x.x eq 80 (where x.x.x.x is your IP interface)

  access-list 101 permit tcp any host x.x.x.x eq 443

  Access-group 101 in external interface

  It will be useful.

  Steve

• Unable to pass user id and password in the URL to open the new form

  We have installed a version of updating of forms 11g and I find that the following code does not work as expected.  Instead of perfectly open the dropper_assign form, we receive the standard name of username/password login prompt / database independently passing credentials in the URL.  If I get the password exactly as it shows in the resulting url then connects the form and the form opens as expected.  Any ideas would be greatly appreciated.

  Code:

  WEB. SHOW_DOCUMENT ("JavaScript: void (window.open ("http://'|| "))") ip_port | "/ forms/frmservlet? pageTitle = dropper transfer & config = TTMSMENU & form = dropper_assign & userid ='| user | » /'|| GET_APPLICATION_PROPERTY (PASSWORD). » @' || : overall. (("DB_Instance |'", "", "resizable = Yes, location = no, Toolbar = no, MenuBar = no, Status = no,")); self. Close () ',' _blank');

  Resulting URL:

  http://9.35.32.204:9001/Forms/frmservlet? config = TTMSMENU & Form = dropper_assign & userid=SSBUECHL/My123pw@FCTEST

  The real problem comes to set these two variables formsweb.cfg in my ttmsmenu Setup:

  UserID = @DATABASEID

  LOGON_SCREEN = YES

  In Forms 10 G, this works to pre-populate the database id in the field of database on the login screen.  In Forms 11 G, remove the logon_screen variable solves the transmission of identification information of the URL.  Delete the userid variable eliminates a bad initial connection attempt.

  Thanks for the help.

• I have an iMac at the beginning of 2009, which takes 5 minutes. to start. I did google and firefox as well as and VPN are the only things open. How can I speed it up?

  early 2009 iMac 2.66 processor

  OS X El Capitan worm 10.11.3

  249 GB available

  It takes 5 minutes to start and I get a lot of time waiting pinwheel

  I cleaned up google and firefox and checked for malware

  How can I speed it up?

  First start by going to system-> startup disk preferences and select your startup disk.  Sometimes after an update OS X startup disk becomes unselected for the firmware needs to address each possible boot device, including USB, SD card, DVD, network, etc... and wait before Timeout interface moves the next possible candidate.

  After that, start in safe mode

  http://support.Apple.com/kb/ht1564>

  This will NOT load any substance left 3rd, you have installed.  Many times, it is 3rd party additions that cause problems of this kind.

  You can edit the output of EtreCheck, who will analyze the someone

  https://discussions.Apple.com/docs/doc-6174>

  Look at the Applications-> Utilities-> Console of all frequently repeated journal entry, such as the process begins, process dies, starts, dies, starts, dies, wash, rinse, repeat also.  This type of failure can go under the radar of other controls.

• Removal of the SBS 2011 server how to migrate DHCP and DNS services to the firewall

  I have a small client that has an old server that comes close to falling; its off primary runnign the disk space and must often be restarted.  they do not need the server and it was decided to remove the server and use a working group with NAS drive for their records.  They have a sonicwall firewall that can handle all DHCP services.  All computers have disjoint form field, all profiles will migrate the workstation's local user accounts.  all work, printing, file sharing and internet services.  When the server is stopped, after about 10 minutes the network goes down and I can't even log into the firewall.

  How I got out of shape services DHCP from the server to the firewall?  the firewall has active DHCP and the range of rental contract is configured correctly, but cann no PC connect when the server is off.

  Im trying to finish this tomorrow so if anyone can help me tonight it would be very appreciated...

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Can I use an ACS as RADIUS and GANYMEDE to the same ASA Server?

  I want to GANYMEDE to make the accounting of the SAA, meanwhile, the ASA need RADIUS for authentication ssl vpn. Is it possible to reach this object with only a CSA?

  Yes, you can use both. Allows you to add ASA as radius and Ganymede.

  ACS-->---> aaa-client network configuration

  (1) ASA---> 1.1.1.1---> authentic using Ganymede

  (2) ASA1---> 1.1.1.1---> optout by radius

  Don't forget the host name cannot be the same.

  Kind regards

  ~ JG

  Note the useful messages

• How to run customer and display on the same host server

  I know it's simple, no doubt, but I can't find the answer on the Internet. I am running BB 1.9i. Recently, I noticed that my server to display some of the customer was not run tests, as I expected. After some checking, I decided that it was because these customer scripts were not in the configuration of the server. My first inclination was to just add them. However, after a bit of research on the Internet, I have seen many people claiming that the client and the server must be kept in separate directories. So, I created another directory and my client config untarred it. I took care of bb-hosts was correct and then I tried to run runbb.sh in the client. He has already said a running process of Big Brother and abandoned.

  Could someone point out what step am I missing or a link to a web page that explains the procedure for configuring a client on the server to display?

  Kind regards

  Brad

  Hmmmm... only, you should be able to install archive of bbclient (at the same level as your bbserver). Copy the bb-hosts of your BB server and. / runbb.sh.

  You should only get this message "already running", if a client is already running (not the server).