pass the exterior entry door
Hello
I 6248, with 3 VLAN configured (1,98,99). 111 is a management VLAN.
My a x.x.x.249 switch IP address (on each VLAN I have different IP address).
to road inter VLAN, I need to set the gateway on the server/PC to x.x.x.249
When I use the gateway switch, I can access all local networks virtual reasonable.
the problem is that I do not have Internet. My exterior entry door is 106.103.1.1 and he sit on VLAN 1.
How can I 'know' switch on 'transfer' every package that should be out of the range of 106.103.1.1 of all switch the VLAN?
Thank you
Looks like you need to add a static route routing traffic outside. command should look like this.
#ip route 0.0.0.0 0.0.0.0 106.103.1.1
That should work, if not we do knowledge may need to add a route on your gateway routing traffic to the 6248, we could also examine the current configuration of the switch.
Tags: Dell Switches
Similar Questions
-
1st gateway is 192.168.0.200 for internet
and another gateway is 192.168.0.254 for leased line
I need to adjust the two entry doors by which I can use internet and access to leased lines
where I do pay gateways in windows xp professional and how much.
Hello
Try these steps and check if that helps:
a. click on start
b. click Control Panel
c. Select network connections.
d. double-click the connection that you want to work with and click on the properties button to display the information related to this adapter.
e. click TCP/IP, and then click the properties button
f. to change TCP/IP address, enter the necessary information and click on apply.
g. click the Advanced tab and add the gateway address.
You can access the link that contains multiple on the gateway configuration information: http://technet.microsoft.com/en-us/library/bb878104.aspx
-
Suppose that in a hypothetical example, I have a superclass (number) with two children (real and complex) classes.
I would define a function of sum for these classes, using dynamic distribution.
Real or complex would have its own method of the sum (VI) which would be subject to various operations, such as the real and complex numbers are different.
As I understand it, the normal way to proceed in OOP is for each of these methods to have an entry of dynamic distribution and a static entry of its own type.
Problem: Labview doesn't let me do this!
I first define an input method dynamic-shipping dummy for the numberof the parent class, but only the first entry can be dynamic-Envoy while the other is statically typed as number.
Then, when I create override methods in my two children classes real and complex, the second entry (static) remains under the number (the type of the parent class). This is not fair, because then I can't access the private data of the child class of type real or complex that will be connected to the second input (static).
What is the solution to this problem (usually)?
I think that, in LVOOP, you use only a dynamic terminal or a static terminal to the terminal object.
You can have several other terminals, but all the dynamics VI (methods with the same name) must have the same API (terminals).
If you have to understand your preferred mode to pass, use multiple terminals, not used by each method, or use a cluster that contains all the numbers to pass (real or complex, both of which are not used in each method) or you can try a Variant, as shown.
-
How to pass the ObjectType as input for search criteria
Hi all
I have the search function that takes input parameters and returns all matching rows. It is only forward. My problem is to have several types as an input parameter. This is the reason why I'm not able to pass the value of entry for these types.
My Input Type table looks like this.
CREATE OR REPLACE TYPE T_T_PARTY_REQUEST_CRITERIA
AS THE T_O_PARTY_REQUEST_CRITERIA TABLE;
/
CREATE OR REPLACE TYPE T_O_PARTY_REQUEST_CRITERIA
AS AN OBJECT
(
SYSTEM_IDENTIFER VARCHAR2 (50).
PROCESS_TYPE VARCHAR2 (50).
UPDATED_BY VARCHAR2 (50).
STATUS VARCHAR2 (50).
CHILD_REQUEST_INDICATOR VARCHAR2 (25).
TRACKING_REQUEST_INDICATOR VARCHAR2 (25).
REQUEST_TYPE VARCHAR2 (50).
REQUEST_TYPE_CLASS_NAME VARCHAR2 (50).
PARTY_KEY_IDENTIFIER T_T_PARTY_KEY_IDENTIFIER,
ADDTN_IDENTIFIER_INFO T_T_ADDTN_IDENTIFIER_INFO
)
/
Finally the two entries are type again.my question is how to pass the values of these two T_T_PARTY_KEY_IDENTIFIER and T_T_ADDTN_IDENTIFIER_INFO. I defined the last two types now.
CREATE OR REPLACE TYPE T_T_PARTY_KEY_IDENTIFIER
AS THE T_O_PARTY_KEY_IDENTIFIER TABLE;
/
CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_INFO
AS THE T_O_ADDTN_IDENTIFIER_INFO TABLE;
/
CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_VALUES
AS THE T_O_ADDTN_IDENTIFIER_VALUES TABLE;
/
CREATE OR REPLACE TYPE T_O_PARTY_KEY_IDENTIFIER
AS AN OBJECT
(
PARTY_KEY_TYP_NM VARCHAR2 (50).
PARTY_KEY_VALUE VARCHAR2 (50)
)
/
CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_INFO
AS AN OBJECT
(
ADDTN_INFO_KEY_TYP_NM VARCHAR2 (50).
ADDTN_IDENTIFIER_VALUES T_T_ADDTN_IDENTIFIER_VALUES
)
/
CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_VALUES
AS AN OBJECT
(
ADDTN_RQST_VALUE VARCHAR2 (50).
ADDTN_RQST_VAL_DT TIMESTAMP (6).
NUMBER OF ADDTN_RQST_VAL_NUM (19: 2)
)
/
I glued the request my function here. When I pass the value null in the entry for these 2 types my query works. otherwise, it's say no valid Identifier.First I tried with the first Type.
I am passing the value that
(PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM IS NULL).
Error is Error (34,147): PL/SQL: ORA-00904: "ITTPRC." "" "" PARTY_KEY_IDENTIFIER '. "" PARTY_KEY_TYP_NM': invalid identifier
SELECT DISTINCT T_O_PARTY_REQUEST_IDENTIFIER (PR. IN BULK PRTY_RQST_ID) GATHER IN T_T_P_R_CRITERIA
TABLE (CAST (I_T_T_PARTY_REQUEST_CRITERIA AS T_T_PARTY_REQUEST_CRITERIA)) ITTPRC;
PRTY_RQST PR
JOIN BUSN_APPLC ON BIAP BIAP. BUSN_APPLC_ID IS PR. BUSN_APPLC_ID
JOIN INTN_STATS INSTS ON INSTS. INTN_STATS_ID IS PR. INTN_STATS_ID
JOIN INTN_PROCES_TYP INTPTY ON INTPTY. INTN_PROCES_TYP_ID IS PR. INTN_PROCES_TYP_ID
LEFT JOIN RQSTYP ON RQSTYP RQST_TYP. RQST_TYP_ID IS PR. RQST_TYP_ID
JOIN ADDTN_RQST_INFO ADTINF WE PR. PRTY_RQST_ID = ADTINF. PRTY_RQST_ID
JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF. ADDTN_INFO_KEY_TYP_ID = ADDKEY. ADDTN_INFO_KEY_TYP_ID
JOIN PRTY_KEY PRTKEY WE PR. PRTY_RQST_ID = PRTKEY. PRTY_RQST_ID
JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY. PRTY_KEY_TYP_ID = PRKYTP. PRTY_KEY_TYP_ID
WHERE (BIAP. BUSN_APPLC_NM = ITTPRC. SYSTEM_IDENTIFER OR ITTPRC. SYSTEM_IDENTIFER = 'ALL' OR ITTPRC. SYSTEM_IDENTIFER IS NULL)
AND (INTPTY. INTN_PROCES_TYP_NM = ITTPRC. PROCESS_TYPE OR ITTPRC. PROCESS_TYPE = 'ALL' OR ITTPRC. PROCESS_TYPE IS NULL)
AND (PR. UPDT_BY = ITTPRC. UPDATED_BY OR ITTPRC. UPDATED_BY = 'ALL' OR ITTPRC. UPDATED_BY IS NULL)
AND (INSTS. INTN_STATS_NM = ITTPRC. STATUS OR ITTPRC. STATE = 'ALL' OR ITTPRC. THE STATUS IS NULL)
AND (PR. CHLD_RQST_IND = ITTPRC. CHILD_REQUEST_INDICATOR OR ITTPRC. CHILD_REQUEST_INDICATOR = 'ALL' OR ITTPRC. CHILD_REQUEST_INDICATOR IS NULL)
AND (PR. TRACK_RQST_IND = ITTPRC. TRACKING_REQUEST_INDICATOR OR ITTPRC. TRACKING_REQUEST_INDICATOR = 'ALL' OR ITTPRC. TRACKING_REQUEST_INDICATOR IS NULL)
AND (RQSTYP. RQST_TYP_NM = ITTPRC. REQUEST_TYPE OR ITTPRC. REQUEST_TYPE = 'ALL' OR ITTPRC. REQUEST_TYPE IS NULL)
AND (RQSTYP. RQST_CLASS_NM = ITTPRC. REQUEST_TYPE_CLASS_NAME OR ITTPRC. REQUEST_TYPE_CLASS_NAME = 'ALL' OR ITTPRC. REQUEST_TYPE_CLASS_NAME IS NULL)
- AND (ITTPRC. PARTY_KEY_IDENTIFIER IS NULL).
- AND (ITTPRC. ADDTN_IDENTIFIER_INFO IS NULL).
AND (PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM IS NULL).
someone can say is that this approach is correct. If this isn't the case, suggest me.I am passing the value that
(PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM ORPART_KEY_IDENTIFIER here is a nested table. If you cannot join it like that.
Try like this
prkytp.prty_key_typ_nm in (select party_key_typ_nm from table(ittprc.party_key_identifier)) or
Here is an example based on the EMP table.
I created as a result of nested table.
SQL> create or replace type my_emp_list as table of number(10) 2 / Type created. SQL> create or replace type my_dept_obj as object(deptno number(10), emp_list my_emp_list) 2 / Type created. SQL> create or replace type my_dept_tbl as table of my_dept_obj 2 / Type created.
I'm going to use the data of the table nested within a query to get the value of the emp table
my_dept_tbl ( my_dept_obj ( 10, my_emp_list(1,2,3,4,5) ), my_dept_obj ( 20, my_emp_list(6,7,8,9) ) )
The query would be like this
SQL> select e.* 2 from emp e 3 join table 4 ( 5 my_dept_tbl 6 ( 7 my_dept_obj 8 ( 9 10, my_emp_list(7839,7782) 10 ), 11 my_dept_obj 12 ( 13 20, my_emp_list(7566,7369) 14 ) 15 ) 16 ) t 17 on e.deptno = t.deptno 18 and e.empno in (select column_value from table(t.emp_list)) 19 / EMPNO ENAME JOB MGR HIREDATE SAL COM DEPTNO ---------- ------ --------- ---------- --------- ---------- ---------- ---------- 7839 KING PRESIDENT 17-NOV-81 5000 0 10 7782 CLARK MANAGER 7839 09-JUN-81 2450 0 10 7566 JONES MANAGER 7839 02-APR-81 2975 0 20 7369 SMITH CLERK 7902 02-APR-81 2975 0 20 SQL>
-
Pass the object as a parameter to a method by dragging to the user interface
Hello
I use datacontrol webservice to call "Webservice secure." A datacontrol method and he fell in the UI, it passes an object (for example, the SOAHeader object) as an input parameter and returns "String" as an output. So, here I created a passing and java class as an object to the method. When I deployed the application in the Android emulator, clicking on this method as a button, his throws me an error message * "" HTTPStatusCode 500: the server encountered an unexpected condition which prevented him from meeting demand "*." I tried to configure the debugger to get log for remote deployment, after that the application itself is not opening in the emulator. So how can I find the exact reason of this error message?
Here, I had some doubts,
(1) is the right way to pass the object as an input method parameter?
(2) how can I call web service secured via 'Webservice datacontrol' in ADF Mobile. I searched in google and received a link by Sonia "http://andrejusb.blogspot.be/2012/11/adf-mobile-secured-web-service-access.html", but not understanding on "* adfCredentialStoreKey *", what is it? and how do I use it? I have defined strategies for security, as mentioned, is - it enough to call Web services secure without giving name of user and password? Bit confused, can someone please tell me more about access to the secure of webservice webservices datacontrol.
(3) I tried to configure the option of debugging (as mentioned in the developer's guide) to get the log of remote deployment. I changed * "java.debug.enabled = true" * in cvm.properties. Once this configuration, can't open this mobile application through the emulator. What could be the reason?
Concerning
REDATake a look at this:
https://blogs.Oracle.com/Shay/entry/calling_web_service_with_complex -
Formula for dividing the three entries from field (D = A/B/C)
I have a formula to get a value, and this is to divide the three entries from field. I don't know enough about javascript to correctly enter the code to make this happen. I have 20 rows in a form and I need to calculate column D I saw a thread on how to divide the two fields, but I need to go further with it. Can someone help me? I added that I was working (left) and I tried to develop (right).
Internet Personal establish the variables for the names of fields for the dividend and the divisor.
var sDividend = ' domain name my dividends. "
var sDivisor = 'name of the My divisor field. "
get the value of the divisor field
var nDivisor = this.getField ("sDivisor") .value;
get the value of the dividend field
var nDividend = this.getField('sDividend').vlalue;
do not modify the code under this line
Clear the value of the result field
Event.value = ";
see if we have a divisor of zero
If (nDivisor! = 0) {}
We can then divide
Event.Value = nDividend / nDivisor;
} / / end of calculation of the division
The above assumes that you are dividing the value of the 2 fields.
Assignment of the variables
var PW1 = "PlotWt1";
var WBC1 = "WetbuConversion1";
var AF1 = "Acre Factor1";
Get the values
var nPW1 = this.getField (PW1) .value;
var nWBC1 = this.getField ("WBC1") .value;
FNa1 var = this.getField (AF1) .value;
Clear the value of the result field
Event.Value ="";
see if we have a divisor of zero
If (nWBC1! = 0) {}
//Actual division operation
event.value = nPW1 / nWBC1 / FNa1;
} / / end of the calculation of the division
Change the line of code:
If (nWBC1! = 0 & nAFN! = 0) {}
If you want to use the same calculation for a number of lines, you can create a function that all calculated fields can use, but it depends on the names of the fields that you use. If you are simply changing the number at the end, the function might be:
function calc1(num) { // Assigning the variables var PW = "PlotWt" + num; var WBC = "WetbuConversion" + num; var AF = "AcreFactor1" + num; // Getting the values var nPW = this.getField(PW).value; var nWBC = this.getField(WBC).value; var nAF = this.getField(AF).value; // clear the result field value event.value=""; // see if we have a non-zero divisor if (nWBC !=0 && nAF != 0) { //Actual division operation event.value = nPW / nWBC / nAF; } }
You can then call it in the custom calculation of the field as the script:
Calc1 (1); Rank 1
For line #5, it would be:
Calc1 (5); Rank 5
This could be simplified a bit if you have changed your domain naming scheme to make it easier to extract the line number. In this way, that you wouldn't have to pass as I showed.
To create a script at the level of the document to place the function, select: Advanced > Document Processing > Document JavaScripts > Add
-
Passing variables via entry/onclick
Here me again!
I need to pass the three fields via entry/onclick. The first is a constant and the next two string variables. I have to use the entry because the user wants a button to push. It's a disappointment because < a href works very well. It's that darn button!
Here is the code:
< input type = "button" name = value "addnew" = "add new leave Request.
onclick = "location.href ='index.cfm? fuseaction = add_new_leave & A = leave_id & user_id = #UserID #& we er_name = UserName # #'" >
I get to index.cfm and for the good action fuse. But when I perform a dump of the URL at this point, all I get is:
leave_id A
user_id [empty string]
fuseaction add_new_leave
No mention of user_name at all. CFOUTPUT statements before the declaration of entry indicates that the user name and user name have valid values. I tell me that the problem must be the way I am in the form of the clause onclick, but just does not know what the problem is.
Any suggestions?
You're right - the syntax is fine (the space after the 'A' was typo here). I tried the button image, but we have not all the cool tools here that create decent looking buttons - just paint (thrill).
What have I forgotten?
To wrap the Bill of entry in a cfoutput tag.
As soon as I did, an immediate success. Of all Follies, a simple cfoutput.
-
tab of a text to the next entry box
I have two areas of text on a single screen and wants to set up so that when they enter text in one, they can tab to the next. I am giving them instructions about what to type in each area, but will not prevent them to continue if they type something different.
Any suggestions? Is it something simple and I just lack? or is it not possible at all?
Thanks for any help.
Margin
Ah, right. I see the problem - mine requires an exact entry, so I can use a screenshot with the text field on the next slide, which is clearly not working in your case.
So a possible solution would be to have the first text box break early in the slide, to continue with the success and failure.
Then have the second text box start on the timeline, just after the first break.
When the user finishes the first field typing and then pressing tab, it should pass the timeline at the beginning of the next text box and make it active.
You need to be careful that he wasn't a big gap between the text boxes from and breaks that you would then have the user, you wonder why nothing was happening for a while after they have tabbed.
I tested a very basic version of this point - a blank slide with 3 text boxes added [first seconds 0 to 0.5, 0.5 to 1 second, third 1 to 1.5] and it seems to work.
[Note for all the text boxes, I've moved the break along the end of the box in the timeline for each, there is no period of inactivity after the break - need to hover over the box on the timeline until you get the double arrow under your cursor, then drag it completely right] It's a little tedious.]
Hope this helps
Lynn
-
How to pass the value entered for the parameter IN a function
Hello
I'm new to pl/sql programming.
The function below is used inside a package and the package is called in visual studio.
The function uses the input parameters 2.
Out what "in_report_parameter_id" value comes through the application of service job processor.
The second IN the parameter values are hard coded into the function.
I am not able to understand this.
If the values are hard coded, how to ensure that only the hard coded values are the right ones?
Please could someone explain?
I don't really have good idea on how to move the INPUT parameter to the function or procedure
Is there any nice document that could give me good understanding about what are the ways or types we could transmit values to the input in the subprogrammes parameter?
Thanks in advance.
Published by: user10641405 on November 19, 2009 08:16CREATE OR REPLACE FUNCTION get_class_text_str ( in_report_parameter_id IN NUMBER, in_which IN VARCHAR2 DEFAULT 'SELECT' ) RETURN VARCHAR2 IS end_text VARCHAR2 (50) := ''; my_class_text_str VARCHAR2(10000) := ''; my_class_value_str VARCHAR2(10000) := ''; CURSOR class_text(c_1_text VARCHAR2, c_2_text VARCHAR2) IS SELECT c_1_text || report_parameters.report_parameter_value || c_2_text || report_parameters.report_parameter_value || '" ' FROM report_parameters WHERE report_parameters.report_parameter_id = 3690 AND report_parameters.report_parameter_group = 'CLASS' AND report_parameters.report_parameter_name = 'CLASS' GROUP BY report_parameters.report_parameter_value ORDER BY CAST(report_parameters.report_parameter_value AS NUMBER); BEGIN IF (in_which = 'SUM') THEN OPEN class_text ( 'SUM(NVL("Class ', '", 0)) "Class ' ); ELSIF (in_which = 'PERC')THEN OPEN class_text ( 'ROUND((("Class ', '" / "Total") * 100), 2) "Class ' ); end_text := ', DECODE("Total", -1, 0, 100) "Total" '; ELSE OPEN class_text ( 'SUM(DECODE(bin_id, ', ', bin_value, 0)) "Class ' ); END IF; LOOP FETCH class_text INTO my_class_value_str; EXIT WHEN class_text%NOTFOUND; my_class_text_str := my_class_text_str || ', ' || my_class_value_str; END LOOP; CLOSE class_text; my_class_text_str := my_class_text_str || end_text; RETURN my_class_text_str; END get_class_text_str; /
Published by: user10641405 on November 19, 2009 08:30This is not a conception I would use, but should work if coded correctly. I would probably create a reference text cursor query and use a fetch of open and close.
You have 2 input parameters, in_report_parameter_id and in_which. I could not find where in_report_parameter_id has been used in the program, but the value passed to in_which is used in the logic of the FI to decide on opening the cursor. After the cursor is opened lines are to be read and possibly the cursor is closed.
The in_which values are compared to the are hard-coded. It is the programming interface to ensure that the values are the values and the measures taken are also correct. Your program is assuming that if the first 2 values are not met the third listed is the one you want.
To pass values of entry in a procedure you simply provide the values as a literal or something like variable in the call,
whatever := get_class_text_str(1,'SELECT');
-
my daughter has every music we want to pass the family sharing the will she lose her purchases
my daughter has every music we want to pass the family sharing the will she lose her purchases
Mvangordon,
She will be able to keep all purchases on his account. See this document:
Note that "all eligible songs, albums, movies, TV shows, books and applications already bought by members of the family are immediately available for everyone in the family."
In the future if she leaves the group sharing of the family, she is no longer able to share purchases, but she will always keep its own.
-
How to put the file to open with the last entry?
My 'sent' folder always open to the most recent entry showing the last email I sent, but, for some unknown reason, it now loads at the top of the file showing the entrance earlier. How to return to show the latest entries, the bottom of the file, rather than the top of the file?
Click the heading labeled DATE to sort on that column. Click on the same heading again to reverse the sort.
-
Why has my Automatic rotation of the ipad stopped when I pass the vertical horizontal screen remains in the vertical position?
Not all applications are supported both orientations. If you experience of this with an app that should work, you know, you most likely locked up the switch of direction. Drag your finger from the bottom of the screen bezel to display Control Center. Tap on the lock with a circular arrow icon.
-
Firefox does not send the file entries via iframe
I know that this is not a forum for programming, but I have problems with firefox while trying to send file entries via IFRAME.
This is my code
<form id="popup_form_archivo" method="post" action="'subir_imagen.php" target="wk_iframe" enctype="multipart/form-data"> <input name="accion" value="subirImagen" type="hidden" /> <input name="wkimg" type="file" id="popup_prompt_archivo" /> </form> <iframe name="wk_iframe" id="wk_iframe" src="about:blank"></iframe>
I'll send the form entries to the iframe called wk_iframe, I get the hidden entrance data, but not the entry from the file...
I don't know why this is happening?, because he used to work.
Works well in safarin, Opera, Chrome, but not Firefox
I must say that I love firefox and that's what I'm here...
Please help me...
I noticed an apostrophe in action = "" ' subir_imagen.php '. " Is it necessary to cite?
- https://developer.Mozilla.org/en-us/docs/Web/HTML/element/form
- https://developer.Mozilla.org/en-us/docs/Web/HTML/element/button
It should still work as noted in the docs.
Any errors in the Web Console (Firefox/tools > Web Developer;) CTRL + SHIFT + K) or browser Console?
A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.
Aid to this forum are better informed on issues related to web development.
You must register on mozillaZine forum site to post in this forum. -
Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
Error messages have been
(1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOMA ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
All solutions?I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.
Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled
-
Firefox does not not at the mouse entry properly. Bug?
Random frequent time Firefox 10 will cease to respond to mouse clicks.
I can't click inside the fields on the page, also the address bar and the search bar of FF do not respond. When I move my mouse over them, the point of the mouse 'Text' appears, but when I click on the input box is not active the icon thing flashing text. If I double click on the address bar, it does not select the current url, as it normally would.
Video controls flash are not able to click. The play/pause button cannot be clicked. The volume cannot adjust. Full screen cannot me input or output (if the mode full screen is enabled before entry-stop mouse works).
To get the mouse entry at work, so that I can type in the text boxes, or use the controls in the flash player, I have to click outside of Firefox. Which means that I have to click on the Windows taskbar, or switch to another program.
I tried to get a screen recording of this question, but every time that I turn my entry fields/flash video recording software before reagent. Assuming that this is because the recording software becomes active on Firefox. And as I have indicated above to switch to another program, and then back to Firefox allows fields/cards entry videos work again.
I thought that this could be a problem of Mouse/touchpad; I reinstalled my Wireless Mouse Software, tried a USB mouse and reinstalled my Touchpad software, but nothing seems to fix the problem.
I also experienced this "bug".
Report bug that cor - el related you ( Bug: 718939 ) you will find a link to a version Patched in Firefox 10
- The Version connected (located in the comment 40)
- Note that this is not a version of Microsoft Office.
The task has worked for me and solved the problem. Unaware of when an official challenge will be available
- The Version connected (located in the comment 40)
Maybe you are looking for
-
RT: Remote desktop says "cannot find a device suitable for C drive.
Hello There is a french position on exactly the same topic, but I can't apply the solution given here. My problem is this: I have a remote, ready to work as a target RT Office. It has been verified for compatibility, the hard drive has been formatted
-
I can't connect my QO55NA Hps PC to my sony walk via bluetooth.
I can't associate my sony walkman Nw - ZX2 with my pc HP 23 QO55NA. The number of matching on my walkman and PC game but when I press pair I get the message incorrect password key. Could someone help please? WiFi is good thanks in advance.
-
Not able to set the brightness of the screen to the point Windows 8.1
Hello I m using HP Pavillion N208TX with the 64-bit version of windows 8.1. I am not able to adjust the brightness of the display key f2 and f3 and implementing market also. When I press these keys, it shows the slider to adjust the brightness on the
-
Troubleshooting of Windows Sidebar When I click on 'Add gadgets' in my sidebar, the screen that shows all the pop, but all the gadgets disappear immediately, so I can't click or select one of them. If this has never happened before, and what do I do
-
Occasional buzzing sound during playback of music or new.
This past week I noticed a humming noise - like when I play music, movies or new videos. It's more than a distortion of the sound like Max Headroom, that a real buzz. And it is not steady, just casual. It is a four years, Dell Studio XPS 435 t/9000