Passage of 10.2.0.5 to 11.2.0.3 - password problem

Similar Questions

• Passage of Variables

  Very well... simple, but not for me it's a matter of AS2.
  
  I have a Flash document and herein, I have an empty clip that I use a placeholder load another Flash animation. When I insert the second swf document in the main swf document, I have buttons that generate values from 1 to 9 (depending on which button the user clicks)... the variable is defined as pageNumber.
  
  I then return to the main timeline in the film using "_root.gotoAndPlay". According to the value of the variable, the timeline has a specific function.
  
  Here's my problem... the variable pageNumber sets properly; However, when I run the _root command to return to the main timeline, the value always resets to 1.
  
  Why resets the value to 1?

  Thanks for the reply... actually the problem was more with the passage of the variable; However, I did some research and solved the problem... maybe I should have dug a little more before this forum.

  In any case... Thanks again.

• You don't have permission to access this folder. Can't access iTunes.

  Original title: user account access changed without being changed.

  Hello

  I have a new computer with Windows 7 Professional. Today, I tried to run iTunes. He said I may not access the folder or it has been locked. Of course my user folder has a big lock next to him. I am the administrator. I have not changed the permissions. Currently, it seems that I have somehow connected with a different account. My library on my C drive folders are empty. This would explain why iTunes does not load. As I said I have not changed any settings. It happened as if by magic...

  How my user folder has being blocked or how my user account has changed its permissions, as an administrator, I should have access to my user folder, or I am now another user? Who is now the administrator? -What happened? A lot of questions. I am happy to be able to see the library files on the C drive, I used to be able to the week last in any profile.

  Any ideas?

  Hello

  After reading this post

  http://social.answers.Microsoft.com/forums/en/w7programs/thread/d616e06f-ecdd-4D34-8d7a-a9936a91ad6e

  I went my users folder and tried to set the permissions again.

  I have 4 users or group names

  System

  [username] ([username] - PC\ [username])

  Individuals ([username] - PC\HomeUsers)

  Administrators ([username] - PC\Administrators)

  When I wnet in the advanced on ther Security tab my 'home ([username] - PC\HomeUsers) users' group had special permits. I selected it and then click on change permissions. Another very similar screen came. I have selected the Group of users of home again and press Edit I selected a full control. All the checkboxes selected themselves. I hit OK, and then click apply. A box appeared that set permissions. I have several errors telling me that permission could not be set. I kept acknowleding and continues. Once the lock on my users folder disappeared. But iTunes still does not work.

  If the lock on my users folder has dissappeared. iTunes still won't work and I think I just make my Connection public network vulnerable to attacks. Great :)

  In any case, I really need to download iTunes running.

  I open my account users (without lock) and try to access my music folder it tells me

  You do not have currenmtly has the permission to access this folder

  Click on continue to have access to this folder permainently

  I click on continue. A padlock appears next to my music folder, but I have access and Itunes now runs.

  All good and well, but I noe feel as if I had a bride mish bad permissions which will expose undoutedly me to safety and is still not right.

  How do I check the permissions?

  I believe that the passage of the group to public networks may have been when the problem started. I'm guessing that I'm not alone with this problem.

  My video files and images all wanted to set their access permannet permissions and now have a lock next to them

  I'm willing to do all this right. Seems not just for now, but then again I can't access my data and run my programs again. How can I check to see if I'm now vulnerable to attacks on public networks?

  Concerning

  Nigel

• How to avoid mistakes in 2015 CC of rounding

  Since the Illustrator CC 2015 update I see a lot of very unpleasant rounding errors when working with vectors in Illustrator.

  For example: I paint a perfectly horizontal line, I'll reproduce them towards the low once or twice using Cmd + D I even make sure they are all directly below the other by selecting all and Kaleidoscope in a left/right edges of the selection.

  Then I select the lines and rotate degrees the entire block 90 or - 90 by holding SHIFT when rotating slide. The version of rotation of lines end up not having their departure and arrived on the same horizontal line, some of them are higher. To make things worse, when to take the Group of lines and turning to 0 degrees than the error persist, they are not directly under each other more.

  It is an example of rounding errors that I have experience in Illustrator CC 2015. The problem also does not disappear during the passage of the GPU overview overview of the CPU mode, unlike other problems that are related only to the way things are displayed. The problem is purely mathematical which affects the actual position of the points.

  Is there a way I can improve the precision of Illustrator CC 2015 to match CC 2014 so something like this won't happen?

  Peter,

  As Monika says you can actually be haunted by aligning it to the ghost of the pixel grid as I thought in the first post, which also holds the complete instructions how to sort.

  But not if the position changes are also great that you said, 8 points. That's why the post #3 down.

  If the interpretation of the screen/image in your post #7 capture depends on the level of scale/zoom.

• ssl error

  Hello

  When

  I opened a session with vClient connect to vCenter 4.0 and after

  fill out the credantials, an error message appears: "request failed because of an error SSL", however this

  message does not prevent access to vCenter. How can I stop considering this message?

  Thank you very much!

  ESX: vSphere 4.0 U1

  vCenter Server: 4.0

  vClient: 4.0

  Hello

  This could be due to an outdated plugin in the vSphere client.

  I suggest you try the following steps:

  Disable all Plug-ins in the vSphere Client.

  1 open the vSphere Client

  2 - Click on Plug-ins > Plug-ins to manage

  3 disable all Plug-ins by double-clicking it and selecting disable. (You can reactivate later using the same procedure)

  4 - restart your vSphere Client and check if the error still appears.

  If the guilty plugin is VMware vCenter Converter, make sure that it is upgraded to the latest version on the vCenter server.

  (for example this passage from 4.0.2 to 4.1.1 - r206188 solve the problem)

  5 - once updated the plugin on the server vCenter, reinstall it in vSphere Client using the plug-in Manager. You can also let the guilty plugin disabled in the vSphere Client.

  I hope this helps.

  Kind regards

  Yann

• easy passage will not work with the new fire fox - it works with google. Why

  passage not easy auto fill ID of user or password after the upgrade to the new version of F.F. It works very well on the google browser.
  Also can I get easy to work in the new safe area browser?
  OS = Vista

  Yes easypass does not work with 22 for now go back to the previous version

  • Install an older version of Firefox

• In the Pages, after copying a passage, a box pops up that I can not remove

  In the PAGES, after copying a passage, a box appears that I can't delete and I can't edit the passage

  What Pages, what the passages, where?

  If it's around the text and you copied this on the Internet, probably you just caught a few html formatting to the text. Paste without style.

  Peter

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• Mac Pro is not displayed after the passage of the screens

  OK, so this is a strange problem but it's very annoying (at least for me). I just bought a LG Ultrawide 29 "display and connected via a HDMI cable to my Mac Pro (Home machine) and a second HDMI cable to my Macbook Pro (desktop computer). The Mac pro / Macbook pro good work with the big screen, HOWEVER, when I use my Mac pro and select the tilt of the screen to switch to the HDMI 2 connection, it works and rocking on my Macbook pro. But when I try to switch it back to HDMI 1 (Mac Pro), it comes back with a black screen and says no signal. Even if I plug the HDMI cable it does not work. I set the timer to 3 hours sleep, doesn't always help. I know he's not missing sleep because itunes can be played when I spend and still playing music throughout and continued when I try to switch back. The only way I could get is long, press the button on my Mac Pro and restart.

  The only reasonable difference that I know is that the Macbook pro is running Yosemites, while my Mac Pro running Beta El Capitan. I have a feeling, this is probably the cause, but I just wanted to know if someone has solved this problem somehow.

  Thank you

  Hello Hemlock70,

  Thank you for using communities of Apple Support.

  I understand that your external screen remains completely black, with a message no signal, during the passage of the views.  For assistance with this problem, please go through the steps in the link provided below.

  Get help with graphical problems on external displays connected to your Mac.

  Take care.

• passage on zero power

  Hello

  I'm usign zero crossing.vi to measure frequency, and 1/2 (RMS)

  In addition, I need a release supplement that provides a logical output for each passage of zero.

  Maybe it's pretty easy, but I'm not good in labview.

  waiting for your help.

  Thank you.

  The output of zero crossing points by zero Crossing.vi are passing zero as the samples index position in the block of input signals. You can convert the index zero crossing zero-hour crossing by multiplying the dt of the wave. Then you can generate the digital 1/0 output based on the time of zero and calculate the number of crossings per second.

  The frequency is calculated according to the points of passage of zero because the period (1/frequency) signal sinusoidal can be determined from both zero time of crossings.

• How to measure the difference in time between the passage by zero of a sine wave and the rise time of a pulse on a same graphic?

  I have a sine wave of 50 Hz and a pulse of the signal on the same chart. The difference in phase between the two is between 0-90 degrees.

  Now I need to calculate the time difference between (when the sinusoidal wave passes through zero volts) and (when the pulse increases). The frequency will remain about even for the two signals.

  The request is for a three-phase generator. In simple terms, when the difference in time between the passage to zero of the sine wave and pulse increases increases, it means that the load on the generator has increased.

  I am a novice user of LabView (version 9, 2009), maybe it's a very simple problem but I was pulling on my hair for the past few days and couldn't understand anything. Any help would be greatly appreciated. I use DAQ USB-6008 to measure these tensions and the impulse of the generator and a sensor

  I have attached a jpg file (a graphic that I just did with excel to explain). The time 't' is what I'm trying to measure

  

  See you soon

  Zdzislaw

  Awais.h,

  For problems of this kind I recommend start writing the granular steps you would take to manually fix this problem.  You can't say LabVIEW (or any programming language) If you can't succinctly describe the solution to your problem.

  The I want to address this problem is to:

  1. find all the zero crossing points and edges on the rise
  2. for every rising edge find the difference between the timestamp and previous passage by zero

  Here is an implementation of this algorithm LabVIEW:

  

• How can I see where the letters are on the keyboard after the passage for the french, Spanish or German

  I use a standard keyboard, but write in Spanish, German and French and English. How can I see a Visual of the key Governing Council after the passage of languages so I know where the special keys are for each language?

  Tuesday, July 17, 2012 17:42:37 + 0000, DavidSouthard wrote:

  I use a standard keyboard, but write in Spanish, German and French and English. How can I see a Visual of the key Governing Council after the passage of languages so I know where the special keys are for each language?

  If I were you, I would not go to all languages. You can get all the
  These special letters on the English keyboard with the help of a third party
  program. I use a program background small freeware called AllChars.
  This allows me (in all applications, type many common special characters
  (many of them are used in other languages) by pressing the key ctrl
  followed by a combination of two-character mnemonics.

  For example, for n the two characters are ~ and n. "C is for c, and, for u, you and.

  To get it, go to http://allchars.zwolnet.com/

  Ken Blake, Microsoft MVP

• With the help of Simple passage

  The software is called Pass Simple, I have to be even more simple, because for me, it's a mystery. I've had drives of fingerprints on other laptops, they were intuitive, they scanned all fingers and offered to save connection details on all the sites that I had to connect. This HP one scanned only one finger, and that's the last I saw of him. What happens if I cut that and only registered finger? Why it doesn't pop up when I get log-ins? I looked in help for Simple passage, which did not help, y at - there a tutorial somewhere?

  Thanks for the Enlightenment,

  David

  Hi David,

  First

  Welcome to the HP Forum.

  ============================================================================

  You can add more traces of fingers.

  How you do that, and where the program depends somewhat on the version of the program that you are using.

  Which is full of computer product name and all of the operating system ?

  The fact that HP SimplePass took just one finger and then abandoned

  and SimplePass is not popping up.

  and SimplePass works as expected...

  makes me think of:

  you're using a newer computer,

  you run Windows OS 8.x,

  you are running the latest version of HP SimplePass series 8

  and you are not using Internet Explorer 11

  If you use indeed the new version of the HP SimplePass and you use not IE11, which explains why you get no offers to save site - series 8.x connections like Internet Explorer and throws his small coded head elsewhere to other browsers.  It's sad.  HP do not for us, incidentally.

  Publishes June 12, 2014

  Chrome Store now offers an Extension for series 8 HP SimplePass.

  Reminder:

  Series 8 HP SimplePass exports to another encrypted filetype (.opi) that only the fact the series 6 (.tsd).  The two are not compatible with each other.

  The main executable:

  Series 8.x HPSmplPass.exe

  Series 6.x SimplePass.exe

  If you pop your Windows key and perform a search, you will find the main HP SimplePass program.

  Once you open it, even on the 8 series, I think that there is a simple link in Help file.  I've linked an older version 8 of series help file in case you can not find one on your system: Softex_SimplePass_V8.0.0.51_OPhelp.chm

  Series 6.x provides a? Help file in the corner of the SimplePass window that will pop a URL.

  ============================================================================

  I tested the 8 series long enough to know it works - and then trashed it because I'm a fan of Firefox.  I'm sure you can add more traces of fingers by opening the program and opening of the wizard or simply drag your finger or something just as intuitive.

  As a point of fact, ago lately a newer version available for series 8 (March 2014) - you can check it out if you wish.  In the world of more recent SimplePass was generally better than the previous version, regardless of the series.

  Adding fingerprinting is all as simple in series 6 - we open the program and goes on the addition of fingerprints.  The help file can help the process, of course, click on the? on the screen of the SimplePass program.

  If you use the 8 series, away series 6 (or "round vice versa) unless you plan to try to pass.  The two programs are NOT compatible on the system at the same time.  They are not written by the same people.

  Guide / Collection of Dragon:

  Simple Instructions for upgrade HP SimplePass

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hi BrendaMay,

  Take a look at this link http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/bf17ed76-5164-4380-9140-16bd74e7c8c7 and check if the post by Ira Horowitz to Monday, December 24, 2007 15:04 is a good one to try.

  Kind regards

  SAP