Similar Questions

• Mac Pro is not displayed after the passage of the screens

  OK, so this is a strange problem but it's very annoying (at least for me). I just bought a LG Ultrawide 29 "display and connected via a HDMI cable to my Mac Pro (Home machine) and a second HDMI cable to my Macbook Pro (desktop computer). The Mac pro / Macbook pro good work with the big screen, HOWEVER, when I use my Mac pro and select the tilt of the screen to switch to the HDMI 2 connection, it works and rocking on my Macbook pro. But when I try to switch it back to HDMI 1 (Mac Pro), it comes back with a black screen and says no signal. Even if I plug the HDMI cable it does not work. I set the timer to 3 hours sleep, doesn't always help. I know he's not missing sleep because itunes can be played when I spend and still playing music throughout and continued when I try to switch back. The only way I could get is long, press the button on my Mac Pro and restart.

  The only reasonable difference that I know is that the Macbook pro is running Yosemites, while my Mac Pro running Beta El Capitan. I have a feeling, this is probably the cause, but I just wanted to know if someone has solved this problem somehow.

  Thank you

  Hello Hemlock70,

  Thank you for using communities of Apple Support.

  I understand that your external screen remains completely black, with a message no signal, during the passage of the views.  For assistance with this problem, please go through the steps in the link provided below.

  Get help with graphical problems on external displays connected to your Mac.

  Take care.

• Mac, learning to the passage of the WLC

  Hello

  I plugged WLC on the main switch on concert 5/5,

  Mac address table is lower to -.

  kernel #sh mac-address-table

  Unicast entries
  port of protocols VLAN mac address type

  4001 8843.e131.1983 dynamic ip GigabitEthernet5/5
  4001 8843.e131.198b dynamic ip GigabitEthernet5/5
  4001 c8bc.c80b.f5d7 dynamic ip, other GigabitEthernet5/5
  4001 c8bc.c81c.3572 dynamic ip GigabitEthernet5/5

  selected is mac of the WLC, who are these other mac addresses of learning through concert 5/5?

  These aren't mac virtual port or service of WLC.

  Hello

  2 here is the Cisco devices... check if any other Interface such as AP manager or the dynamic interface has Mac.

  4001 8843.e131.1983 dynamic ip GigabitEthernet5/5
  4001 8843.e131.198b dynamic ip GigabitEthernet5/5,

  the MAC here is the MAC of the seller and not identified by finder YES...

  4001 c8bc.c80b.f5d7 dynamic ip, other GigabitEthernet5/5
  4001 c8bc.c81c.3572 dynamic ip GigabitEthernet5/5

  Just do what the MAC in your network...

  Let me know if that answers your question and please do not forget to note the useful messages!

  Concerning

  Surendra

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• Shortcut keys in the Mac Terminal

  I'm changing the keyboard shortcuts in the Mac Terminal app for some functions as select the tab following, selecting the previous tab, and by killing a process. Under system preferences > keyboard > shortcuts > shortcuts > App shortcuts > Terminal > + > "Title Menu" > "keyboard shortcut".

  Keyboard shortcut: Menu title

  CTRL-Tab: Select next tab

  CTRL-SHIFT-Tab: Select previous tab

  ⌘C: kill the process/demolition/KeyboardInterrupt

  None of them have worked. I guess the problem is the offset of the menu title. How can I get the title of exact menu used for functions?

  OS: Mac OS X El Capitan

  I was able to get Ctrl-Tab and Ctrl-Shift-Tab using the language you specified.  Extra spaces and exact capitalization, etc...

  I don't know where you saw "kill the process/demolition/KeyboardInterrupt" as a menu item.  I looked and it was not found.

  + Command + C is also the global copy selected text.  You can remap it, but I don't know which menu you were seeking "kill the process/demolition/KeyboardInterrupt.  Maybe a screenshot.

  Of course it makes me wonder why Ctrl-C (standard on all the Unix platforms to kill the current order) is more difficult than the command-c to use to kill the current process.  You are ready to use control during the passage of the tabs, but does not kill a process?

  Other thoughts.  You have all kinds of other software mapping of the keys installed that would interfere with your maps?

• 2012 the Mac Mini has sluggish 5 GHz Wi - Fi

  OK, this is weird.

  Suddenly, my Mac mini is to have WiFi connections intermittently slow on the 5 GHz band, a router Linksys WRT-1900AC.

  I have a 105 MB Comcast connection, and usually tests Speedtest.net Mini cede passage on 100 Mbps results, usually in the 120 Mbps.

  This morning, I started having intermittent slowness. Sometimes I would grind to a halt, or there would be a long time to connect to a website. Speedtest pings during these episodes would be too high that 990 - in general, they are about 14 ms.

  The 2.4 GHz connection, which generally gives me a slower rate in the range of 50 Mbps, is fine. The only issues I see are at 5 GHz, where I have the chance to get a speed in the range of 30 to 50 Mbps.

  All other devices - iPads, iPhones, MacBook Pro, 4th-gen Apple TV, Microsoft Surface Pro 4 - connect at 5 GHz very well. I get my gears zippy on other devices. Just not the Mini.

  I rebooted the router and the modem. I emptied the cache DNS on the Mini. I deleted the Linksys SSD in Network preferences then reconnected. I removed the Mac Mini map of the network of the Linksys firmware and restored. So far, nothing works.

  One thing to note: a few weeks ago, I installed a couple of SSD in the Mini, replacing a single stock of HARD drive. Which is to remove the antenna plate (and everything else inside the Mini). But I re-assembled very well, and it has been working fine since then. I think that if there is a problem with the antenna, it would affect the 2.4 GHz band, too.

  Also, we moved into a new apartment in the same complex, taking our Comcast service with us. It worked fine when I put in place Sunday and worked a lot since then. But the Mini is in a new location on the block.

  Any suggestions for what to do next?

  If possible, please connect to the router with Ethernet and see if there is an improvement.

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• The Mac version does not appear in WYSIWYG ASP

  Hi, after I lost my patience with Microsoft Vista I decided to buy my first Mac (iMac 24 "). Yes, it's a beautiful machine, but I still have a hard time to see how the Mac makes my life better. Among other problems, when I open one of my dozens of ASP pages in the version of DW3 Mac I get only the code view. The screen is gray. Similarly, I can create sites and open the files to my web server (IIS), but I can't put the files (which too is greyed out). What is the problem? I realize that ASP is a Windows technology but is it really too much ask for the allegedly higher Mac to show a legitimate web format in display mode? Unfortunately, this is just one of the many problems with Mac that make me to contest the decision to invest in a Mac. Sorry, I don't really see the superiority in my daily tasks of working (and what's happening with the fonts that need a magnifying glass to see? "I have yet to see how can I increase the font size in most applications, as this message - and the police in the system preferences control only affects the size of the police for help desk, big stinky that is).
  
  Thank you
  Larry Schankman

  Murray,

  Thanks, that did the trick! In fact, I feel quite stupid (in other words, dumber than usual). Now that I think of it, I believe that I accidentally added asp as an extension code-display only when first set up preferences. I didn't know it was for code view only (I realize the ignored default ASP as a type of file). I didn't need to change file extensions, although I was happy to learn of their existence. Thanks again!

• updated Mac and now I am unable to answer the phone calls of the Mac

  Yesterday I updated my Mac to the new operating system.  Since then, I could not pick up calls from the Mac as I used to.

  Can someone tell me how to solve this problem?

  Hi jlfrisella!

  I see that you are unable to use the calls feature cell phones iPhone on your Mac since the update to Mac OS Sierra.  I can understand wanting this function runs on the right, and I'm happy to help you.  Please see requirements and instructions in the following articles.

  Continuity of use to connect your Mac, iPhone, iPad, iPod touch and Apple Watch

  Thank you for using communities of Apple Support.

  See you soon!

• How downgrade to El Capitan without having in the Mac App Store

  Hello! I'm completely new to Mac and for this forum. Coming from Windows, I found the keyboard a bit confusing. So I installed carabiner, which most of the time worked like a charm.

  Then there was a notification update to Mac OS Sierra. So I did. And now the carabiner is broken. In addition, the trackpad scroll is annoyingly slow, and I realized that I just liked El Capitan more generally.

  But since I got the Mac with El Capitan, I don't have in my list of purchased on the App Store. So where can I find an official download to create installation media, and then reinstall El Capitan (which, as far as I KNOW, is the only way to "downgrade" a Mac if I have no backup of before)? I have no personal files on Mac yet, so I don't mind erase the drive.

  Suggestions would be highly appreciated, even with solutions) 1 carabiner to work again and 2) to change the sensitivity of scrolling to the trackpad.

  Thank you for helping a newbie to Mac!

  Download El Capitan on the App Store

• Unlock the Mac with Apple iWatch

  I have a MacBook to 2015 and iWatch. The Mac is on MacOS Sierra and the iWatch is on version 3, so both devices are on the latest version of the software. I also have an iPhone on the latest IOS that the watch is twinned with 6. All devices are on the same iCloud account.

  I tried everything I can do the iWatch unlock the Mac. I'm getting very fed upwards with it's complicated. I spent 2 step 2-factor authentication audit and I read each thread and an article I can find, but I can't get it to work. It seems I'm not the only one. I thought that Apple was easy to work, but with each update and the new feature which is launched, it becomes more complicated.

  I spent hours trying to work and decided that he would save me more type my password every time I have unlock the mac it takes to implement this feature from time to time saving!

  In any case, after trying everything I always get the message "your Mac was unable to communicate with your Apple Watch."

  

  If anyone can help I would really appreciate. Otherwise, I will ditch the idea to get this feature to work.

  Thank you Apple lovers.

  Try these similar thematic subjects - Impossible to unlock MacBook Pro with Apple Watch OR your Mac was unable to communicate with your Apple Watch OR your Mac was unable to communicate with your Apple Watch

  Allow automatic on your Mac and Apple Watch unlock OR similar link

• Problem connecting to the Mac newbie

  Hi, I had some problems with malware after that (stupidly), I tried to download a software to capture audio online. I started getting pop ups on a so used a malware scanner to delete these (I've used it before and it worked fine). I restarted the mac but when connecting the profile appeared my keyboard would not type in my password for user profile box. I managed a login in safe mode and could log on as user guest (no password) but not on my usual profile. Any advice would be much appreciated.

  ... used a malware scanner to delete these

  In general, it is misguided. What safeguards do you have?

  Your user account does not appear as an option for connection?

• I want to install windows os(not genuine) in the mac, I use mac air beginning 15, 4 GB of ram, 128ssd.     I want to play counter strike (overall offensive) in the windows operating system.     is 4 GB of ram enough or it takes 8 GB of ram.

  in fact, I want to install windows os (not authentic) because I'm fond of counter strike

  so, mac support this game?

  or it takes 8 GB ram to play counter strike?

  operating system windows (not authentic) will cause no effect on mac?

  If I install the windows on mac operating system, I will award 58 GB in the windows operating system and remains to mac, goes no problem in the future, due to the windows operating system?

  ALSO POINT OUT THE ADVANTAGES AND DISADVANTAGES OF INSTALLING WINDOWS ON A MAC.

  operating system Windows (not authentic)

  This means that you ask for assistance on the use of a pirate copy of Windows?

  If you install Windows, you have the advantage of being able to run Windows and the inconvenience of having to deal with all the viruses and stuff for which Windows systems are prone.

  Why not just buy the Mac version? It seems relatively inexpensive: http://store.steampowered.com/app/730/

• Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  I've just updated to Sierra. Since the upgrade did several reboots. When I discover an app the side also shows "4 +" or similar and I click on the note to view reviews and ratings of customer, a blank screen appears. Everyone knows this or have a way to solve this problem?

  I see even here in Seattle, so I think the question is about the end of Apple.

  By the end of 2012 Mac minis, macOS?  Watch 38 mm silver AL, watchOS 3; iPad 2 Air & iPhone 6 + iOS 10.0.1;  Apple Airport Express

• Slim drive ejected from the Mac Mini

  I have a Mac Mini running El Capitan.

  My external drive keeps a slim, used only for the back upward, Gdrive be ejected without any input from me. He has a lot of storage space.

  Any thoughts?

  Try a different USB port on the Mac.

  Try another USB between the Mac and the G-Drive cable.

  Then if it is still bad ejection, contact the Support of G Techonolgy.