Passage of value a SWF into another SWF
Hi friends
I have 2 swf one.swf and two.swf, so I want to just pass the one.swf value to two.swf
is it possible and how?
thnx in adv.
If swf2.swf is the same as 2.swf, you run your sending code before the code of your receiver. This is why it does not work. In addition, you do not use the code that I suggested in swf2.
remove all the code in your main swf file use the following. don't change anything. Simply copy and paste:
//
var Var_data:String = "Hello World";
loadMovieNum("swf2.swf",1);
this.onEnterFrame = loaderF;
function loaderF (): Void {}
{if (_level1.getBytesLoaded () > 0 & _level1.getBytesLoaded () > = _level1.getBytesTotal ())}
trace ("swf1 sending");
_level1.exectue_this (Var_data);
}
}
and in your swf2, use:
function execute_this(s:String):Void {}
trace ("swf2 reception:" + s);
}
Tags: Adobe Animate
Similar Questions
-
Detect if a swf file is loaded into another swf
Is there a way for my flex swf to detect if it has been loaded into another swf parent or if it is running standalone?
Any help appreciated.
Marcus
SystemManager.isTopLevel and isTopLevelRoot
-
load a SWF into another domain and access its functions and variables
I need to load a swf file into another domain and call its functions and access to its variables, in the same field, I can load and access its functions successfully, but in different areas not.
control the class security. Depending on the browser version that you're targeting you might be able to get out of the allowDomain() method, but you'll probably want to use a cross-domain security file.
-
Preserve the cadence when loading a swf into another
Is there a way to preserve the cadence of a swf file when loading into another swf that plays at a higher rate. I load some flash ads that work for most to around 12-15 frames per second in a portfolio site that revolves at approximately 40 frames per second. All my ads play too fast. The link is:
www.dg8tal.com/portfolioidea.html
Thank you!
You can use the code below the dotted line to play (and stop) the movieclip to frame m to n fram to any framerate (fps) allows to manage the host computer:
-
Passing values to swf in html or javascript
Hello everyone.
I am new to Flash, I developed a site in flash, UI only, now, I have a contact form in my swf file. can someone help me by incorporating this swf file in html and get out the values of the SWF in html and print on another page html page, I just need help in obtaining the values and swf file in html format.
Thanks and greetings
You are welcome.
using the sharedobject object will eliminate this problem with obtaining data from one swf to another for the same customer using SWFs in the same domain.
-
Copy of a flash file and paste it into another...
I want to copy a .swf file I have and paste it into another one, executives and all. I tried but nothing is copied on correctly. Or are my buttons on a single image... and no longer act as a button with Up - too-Down-Hit managers. Is this possible? Help, please...
Thanks guys,.
-Dedikation-
Select all of the frame of the timeline, right-click the selection, and choose copy image. In the other file, insert-> new symbol-> MovieClip... etc... Select the key of one layer only the empty movieclip, then right-click the selection and choose Paste images. All layers and managers must paste that they were copied.
-
When I select a word or phrase and copy to the Clipboard, then paste it into another area of the Clipboard does not erase the expression. Therefore, every time that I type and press the Enter key it continues paste the sentence throughout my document. I have the latest download of Firefox are installed (16.0, win 7 and that's when it started.) How to stop this heinous behavior so I can type a sentence with normality?
Louise
Try Firefox Safe mode to see how it works there.
A way of solving problems, which disables most of the modules.
The problems of Firefox using Firefox SafeModeWhen in Safe Mode...
- The State of plugins is not affected.
- Custom preferences are not affected.
- All extensions are disabled.
- The default theme is used, without a character.
- userChrome.css and userContent.css are ignored.
- The layout of the default toolbar is used.
- The JIT Javascript compiler is disabled.
- Hardware acceleration is disabled.
- You can open the mode without failure of Firefox 15.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
- Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themesWhen find you what is causing that, please let us know. It might help others who have this problem.
-
I received a text document that went into another language, how it translate to English?
I received a text document that went into another language. I don't know what language it is. How to get English, so that I can read it...?
* original title - please help! *
Go to a page of internet translator like Bing Translator or Google Translate and paste the body of the text file in the text box for the foreign language. This can be done by opening the text document by pressing on Ctrl + A (e.g. Select) then Ctrl + C (e.g. copy). Then, place the cursor in the new place and pressing Ctrl + V (for example the dough). Let the program automatically detect the language of the source if you are not sure of its origin, and then click translate to the English equivalent.
-
Dear all,
I need your help I need to export data from user a (1 instance) and import it on another an instance without storage on location.
I used to do as an export of data about the physical location and then import into another instance where I stored the dump file on physical location.
Now I don't want to follow these method (standard method), is there any way possible means kindly share with me. Thank you very much in advance.
Dear VA Napoleon,
Thank you for your immediate response. If it's possible means gives the example script.
-
How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of change the color, I chose.
Three things I can think of:
Your document must be in RGB mode.
Layer blending mode should be set to Normal
Masks are grayscale. If you select the mask, you cannot apply a color.
Always check your tab at the top to see if what you choose is RGB or grayscale.
Gene
-
I want to cut a piece of a picture and paste it into another picture.
I want to do something in photoshop that is EXTREMELY easy to do in Microsoft Paint, but I can't use paint, because the file size is too large.
What I want to do is cut a part of the image to a file, and paste it into another file, move to the location I want.
In painting, I would choose the area I want to cut/copy.
I'd then cut or copy.
I then opened the new photo
I would then paste. This would cause MS Paint paste the section copied in the upper right of the screen.
I then propose section glued to the desired location.
It was very, very, very simple.
How do these same steps in Photoshop?
I am a collage. The pieces of cut/copy range in size. I have MS Paint, I just stick, then move them. You don't have to accurately know their size. I can't do the above in Photoshop using "paste in" because I have to know precisely the size of the portion that I just cut.
You have the tool to move (V) of the selected?
Could you please post a screenshot with the Panel visible layers?
-
I dragged a cutout of the image of a photoshop document into another, and now she is blurred. What can I do to prevent this?
What is the resolution of the image that you "dragged"? The resolution is the number of pixels per inch (DPI). If you dragged a file of much lower resolution to a higher resolution file, it could result in a blurry image.
See below:
To learn more key Concepts:
http://www.Adobe.com/DesignCenter-archive/KeyConcepts/articles/concept_resolution.html
You can determine the size of the image by choosing Image > Image size
below you can see the dimensions in pixels of my image for example.
Basics of the resolution:
Adobe TV - http://tv.adobe.com/watch/creative-sweet-tv/photoshop-resolution-basics/
http://TV.Adobe.com/watch/Visual-design/getting-started-09-resizing-an-image/
Adobe Help:
http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7945a.h tml
-janelle
-
Make it a required field based on entry into another area
So I did search the forum for answering the question of how do some fields in a required form if a value is entered in another field designated and not required if no value is entered in the corresponding field.
For example:
There is a field called QTY_paper, and if a value is entered in QTY_paper, then the PROGRow1 field should be required.
If no value is entered in QTY_paper, then PROGRow1 is not necessary.
I tried both FormCalc and Javascript, but without any result. In FormCalc, I added this script as a mouseExit on QTY_paper event:
If ($.isNull == 0) then
Make the required field
PROGRow1.validate.nullTest = 'error ';
endifand then I added this script in FormCalc to mouseExit on PROGRow1 event:
If ($.isNull == 0) then
$. validate.nullTest = "disabled".
endif
This happened almost word for Word from another post on the forum, so I think I'm missing something obvious here... which is weird because I'm still pretty new by adding scripts. Please help if you can!
Yes a lot of dynamic things is not taken in charge in static PDF files, stuff works and many do not work. What a pity that you can not rebuild the form.
While the border color does not change, the field can still be getting the required value, and so it can still work as a required field.
The other alternative would be to make all fields and scripting in Acrobat.
-
How the values to insert into the table with the command insertion
Dear all
can someone tell me how the values to insert into the table with the command insert, I want to say I always use command insert behind my forms on what shutter release button press the button of my save, but today I had a form of 6i, where controls (textbox, combo, etc.) are delineated with directly the table with I guess than the Properties Windows , I created 3 columns in tand 3 text on forms fields, now kindly tell me how to do this fields to fill and do not insert command, I mean directly defined with table column
Please help me its urgentHello
If the block is based on your database table, just committed the shape, then changes will be applied to the database.
François
-
Possible to include a PDF signed into another PDF file?
Hello
This can be a bit of a strange question, and I ' do not know if this is the right forum.
Is it possible to include or wrap a pdf signed into another pdf file. The second PDF will serve as another signed envelope.
Would I be able to save the original PDF in a separate file?
see you soon,
Gary
Of course you can. You can include a PDF file as an attachment. For example, in, select Acrobat 9: Document > attach a file
Attached file can be recorded separately in the Attachments pane.
Maybe you are looking for
-
HP laptop - 15-af131dx: HP for laptop - 15-af131dx have blue tooth? Can I add?
Does the HP for laptop - 15-af131dx have bluetooth? Can I add? Wally
-
I am trying to reload my age of Empires games on my (relatively) new pc (Vista) - so far, I was able to load AOE1 & expansion and AOE2, but when I try to load AOE Conquerors expansion or the Age of Mythology, I get the above error message. Tried rest
-
I bought my XP Home Edition in 2006. I use it as a second laptop, so it is great for any e-mail, internet and a desk job. As the C drive is too full here have already deleted more programs and files, but it is always full. Especially with Microdoft s
-
I'm trying to create and update a new user using NSAPI and PSC 11.0 and get state 415 Unsupported Media Type. Is there something that I am missing? I publish this customer postman of Chrome. The request is: / RequestCenter/nsapi/directory/people/udpa
-
Running Windows 7 Home edition (Spanish version) While trying to find space on my portable hard drive, I noticed that there are 8 versions of Microsoft Visual C++ 2008 Redistributable Package (x 86) on my machine. That's a total of more than 4 gigaby