Passed the VCP-310 today: Challenging to say the least review

Similar Questions

• Passed VCP-310 today... and now?

  Hi all,

  I just passed the VCP-310 today (at the second shot for me) now I think to upgrade my VCP to Vsphere. I know that if I don't take the exam in 2009, I have to follow the course of "what's new". I see that the course can also be self-paced format, I would ask you if this course, after 2009, is ok for the certification.

  Thank you

  The rhythm what's new course is not the same course in the classroom or Live online.

  If expect 2010 before to do anything else, finished the course individualized on top of your VCP3 you will qualify for the VCP4 certification, only courses in the classroom or live - online would do that.

  Scott.

  -

• 10G Confirmation of Passes the necessary review for OCA and OCP

  Hello
  
  My apologies if this was asked in another thread.
  
  In order to be allowed to win 10 G OCP I must pass these exams in the following order:
  
  1Z0 - 042 and one of these (1Z0-007, 1Z0-047, 1Z0 - 051) to win the OCA first, then 1Z0-043(plus course).
  
  I passed 1Z0-042 and I was keen to study for 1Z0 - 043 then. I learned that before I can sit 1Z0 - 043, I would need to fill out one of these first (1Z0-007, 1Z0-051 and 1Z0-047).
  
  Please confirm the right course of action for me.
  
  Thank you

  user3344498 wrote:
  Hello

  My apologies if this was asked in another thread.

  In order to be allowed to win 10 G OCP I must pass these exams in the following order:

  1Z0 - 042 and one of these (1Z0-007, 1Z0-047, 1Z0 - 051) to win the OCA first, then 1Z0-043(plus course).

  I passed 1Z0-042 and I was keen to study for 1Z0 - 043 then. I learned that before I can sit 1Z0 - 043, I would need to fill out one of these first (1Z0-007, 1Z0-051 and 1Z0-047).

  Please confirm the right course of action for me.

  Thank you

  You can take the exams in any order you like. So, if you want to 1z0-043 then (1z0-007/047/051) as you seem to want to do you can.

  If you seem to have been said misinformation... however...

  0) If you have passed 1z0-042 long, dec 2008 memory, you don't have to do a review of SQL. Certview will show your exemption if you are exempt. And you will already be a DBA OCA 10 g.
  (1) it is IMHO probably far much more sense do 1z0-051 and 1z0 - 007 before continuing with 1z0-043.
  -It's because passing a SQL you will win (with you pass 1z0-042) a DBA OCA 10 g. ... and also because good SQL will help with your practice of the Oracle and your study of OCP.
  ---(Une exception pourrait être si yu juste assisté à une mains sur parcours et souhaite étudier pour tirer de l'examen 1z0-043 dès que possible après le cours).

  Thinking is important for you to have planned to participate in a hand that is appropriate on the course for your 10g OCP DBA... his time thinking that if your haven't already.

  Rgds - bigdelboy.

• Passed the VCP exam today, now what that?

  I took the VCP exam today and passed with an even 300. What happens then? Should I wait for VMware to match my training in my review? Y at - it any action required on my part?

  Thank you

  Daniel

  Yes, under the myTasks section you will see the article "VCP on vSphere4" appears with a list of things to do.

  The points are:

  VCP on vSphere4 Exam

  AND

  Confirm the shipping address 4 VCP

  AND

  Transcript release 4 consent VCP

  AND

  Agreement of VMware (VCP4) Certification

• Just passed the VCP-310... Then to the top of VCP4

  Hello

  I just passed the VCP-310 exam... Yippee...

  Can someone give me some advice on VCP4? I'm looking to take this exam in the next 3 weeks. I hear you get two shots at it for the price of one! Is this true? Not that I intend it fails on the 1st attempt, but it's a nice safety net

  Bravo on the VCP3. There is a free re - take for VCP4 until the end of 2009, and also as a VCP3, you can get your VCP4 by submitting to the examination (no training required) until the end of 2009.

  My blog and the web site contains all the VCP4 info that I have on...

  Scott.

  -

• Past the 'Friday the 13th' VCP 310 exam today

  It passed with only a 80 but as Duncan, who pass!  Was pretty worried about it even just before hitting the review button submit, especially waiting for the CONGRATULATIONS screen to appear.  We use /VC ESX 3.5 2.5 everyday, even to put up several systems from scratch, but not in detail the examination covered.  Here's what I used to study:

  I have gone back to the fast track in the Irvine case last year and studied the two volumes, they have given us.

  I studied the latest ESX 3.5 update 2 pdf files (but not as thoroughly as I probably would have).  I focused mainly on the configs mini-maxi, VCB, storage, etc. and press lightly on the stuff I've done every day.

  I also bought last week the EXAMCRAM guide for the VCP-310, hitting everything home.

  One thing not to be overlooked is this forum.  Thanks to all who responded to millions (far too stating it) of questions that people put here.

  Thank you!

  Glenn McHenry (ps: thanks Bill!)

  Congratulations!

• Passed the VCP - 310 test yesterday

  Wow!  Whoda' thunk that a test of multiple guess would be otherwise exhausting?  I've used several resources, not the least of which were the guides VMWare config max and especially my VI3 install/config alms and even some material retrieved on the Internet.  We have an environment VI3 here at work and I'm good enough admin it so that was a bonus.  Scored a 86% and thought, I actually did worse, so happy-happy-joy - will now wait for the VMWare site update, I guess. I heard about 30 days...?  And wait for my package in the mail...

  Helluva test and I have tested and passed CCNA (1.0) and although a few MS CERT (MCP, MCDST) so I know a little on the certification tests.

  Kevin

  Congratulations!

  You should receive you kits home by mail within 4 to 6 weeks.   If you have any questions please contact [email protected]

• The question after having passed the VCP 4 months after class

  Yesterday, 12/23, I spent my VCP-310 on the first attempt after taking the class Fast Track V3.5 back in August ' 08. Big shout out to Mark Fei and David Johnston, who were the instructors for this category - thanks guys!

  The review was almost at the same level as the level of difficulty, I waited - some of the questions that came I was not waited, but made more educated guess efforts... Still managed to achieve a score of 85%, which I am more than satisfied.

  A few questions...

  1. my VCP number seems to be an incremental number. Which does not indicate the number of candidates for the exam, or the number of people who have passed, or is it a somewhat random number?

  2. What's included with the welcome kit? I was a little disappointed to learn that it takes 6-8 weeks to get here. I was hoping to at least get some kind of recognition of VMware - as account information secure Channel being sent to me. Instead I asked him by e-mail.

  3. can I I consider myself as a secure Channel now, or I have to wait for the welcome kit to make it official?

  Thank you and Happy holidays everyone!

  All first off the coast of congratulations for joining the world ever-increasing VCPs!

  1. my VCP number seems to be an incremental number. Which does not indicate the number of candidates for the exam, or the number of people who have passed, or is it a somewhat random number?

  Yes it is progressive but over the years, that VMware has ju, ped in the sequence is not good indication of County VCP - last article I saw said 20000 + VCPs worldwide

  2. What's included with the welcome kit? I was a little disappointed to learn that it takes 6-8 weeks to get here. I was hoping to at least get some kind of recognition of VMware - as account information secure Channel being sent to me. Instead I asked him by e-mail.

  I know it's disappointing, but you said approaching the right way - they will provide this information for you.

  3. can I I consider myself as a secure Channel now, or I have to wait for the welcome kit to make it official?

  Yes you can-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a msg says: "Windows did not find antivirus software on this computer. What should I do?

  Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13.  Today a mesg says: "Windows did not find antivirus software on this computer.

  What should do?

  Download another copy of McAfee and activate it with your existing license.

  Ask for advice here: http://service.mcafee.com/Default.aspx

• Passed the VCP-410 - now what?

  I passed the VCP exam last week and I also took the VCP 4 RAIL 32 hours courses.  When should I expect to get my number of VCP and have my certification appear in my account?

  You´re welcome!

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• Still awaiting to hear from VMware after taking the training and pass the exam.

  Hello

  I took the training on February 1 (VMware vSphere: install, configure, manage) and passed the VCP - 410 exam on February 8, but have not yet heard of VMware.  :_|

  Is it normal that it takes a long time? I am supposed to receive an e-mail to confirm my VCP status, right?  ?:|

  Thank you.

  The status on the website of Pearson view should say that the review was a 'pass', you won't hear anything from VMware, until you receive your welcome kit VCP in post/mail and your Workstation 7 license by email - you should get those in the next 4-6 weeks... Bravo

  Scott.

  -

• Validation of VCP - 310

  Hello

  How long is valid for the VCP-310 certification?

  So has expired how us improve?

  Hello

  At present, there is no expiration defined by vmware certifications

  but you need to update yourself on upcoming products

  If you have vcp3 you pass the vcp4 exam before December 31, 2009. otherwise the course is mandatory to become a vcp4

  reference http://mylearn.vmware.com/portals/certification

  Prakash

• VCP from today - now how make it worth $$$?

  Hi all -

  I passed my VCP today - woohoo!  I have worked with VI3 and unemployed for most of the year and have everything set up, consolidated our Dev Environment, and am doing the same thing to our DR site.

  I told my boss and his boss on the passage of the review and what I came out it was "Good work" - a colleague bought me a Mocha for a reward.  I'm the only person in our society which has been formed on this stuff and only secure Channel (of course).   So, here are my questions: have you found ways to make stand out / make more than $$$ now that you are certified?  Is the only way to make profit VCP is to go elsewhere?  There are part-time positions that would need a PCV?  Thoughts?

  Thank you for your comments!

  Michael King

  First of all, congratulations. Secondly, did you pay for this yourself, materials or training certification? If the company has paid for it, then it is everything.

• Best way to pass the name of the e/s DAQmx channel Veristand 2011 Custom Device?

  I'm building a custom device that will run a DAQmx task on the target of RT.

  I use VS2011 and alsoSimple custom device tool, which, at this point I'm not sure if it can work under VS2011...

  I created the fine libraries and custom device (a PWM input called InputPWM) has added to the Explorer from the system.  Running it returns the following error when I deploy:

  -----------

  LabVIEW: Type VI reference is not part of connector of VI.
  =========================
  NEITHER VeriStand: Open VI reference in Custom Devices Storage.lvlib-> pen device reference (Interface HW) .vi-> Custom Devices Storage.lvlib:Initialize Device (Interface HW) .vi OR VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi-> NI VeriStand Engine.lvlib:VeriStand Machine.vi engine-> Engine.vi NI VeriStand Engine.lvlib:VeriStand-> NI VeriStand Engine.lvlib:VeriStand .vi engine Wrapper (RT)
  c:\NI-rt\VeriStand\Custom Devices\InputPWM\InputPWM Engine.llb\InputPWM RT pilot VI.vi

  ----------------------

  On the console, it says that the error is 1026, LabVIEW: Refernece VI is not valid.

  I suspect that a potential problem is that I used a DAQmx e/s in the Configuration.ctl and the InputPWM RT pilot VI.vi in the framework can not deal with this type. So my questions:

  -What is the easiest way to pass the names of e/s to the custom device? For a quick test, I could go to hard code, but a more generic solution would also. Should be based on the address for the e/s MAX? Do I have to create the ctr under the DAQ hardware in VS?

  - or said by the way, is there a way to review these screw frame to see where the questions is, as you would with LV - RT?

  THX.

  L.

  If you use the tool of easy custom device, just put everything you need inside the cluster configuration data and these data will be in the home page of the custom (for the user to set) device and be available at runtime in the RT device custom code.

  You could have them type the name of the DAQ card and have an array of names for the channels to use. You then create the task running. or something like that. You like.

• I have my old laptop work, admin access, and I need to pass the parameters of language from German to English, especially the menus. Can you please indicate.

  I have my old laptop work, admin access, and I need to pass the parameters of language from German to English, especially the menus. Can you please indicate.

  A.I have changed the time zone.

  But I can't understand how to move to the menus in ENGLISH and the keyboard settings. They are in German. Need urgent help

  The system is running on Windows XP Professional

  Thank you for your help in advance.

  (Yes the multi language pack is somewhere on the laptop... where I'm not sure)

  Hello

  1. - you want to say that you have an administrator access on this computer?

  2. What is the operating system default language when the laptop was purchased?

  If the default language is German so it is not possible to change it to English.

  Reference: to change the language used for menus and dialog boxes