Passing an identifier simple via a url using a hyperlink problem

Similar Questions

• How pass an array into a php url using the flex http service?

  How pass an array into a php url using the flex http service?
  im making something like this:
  http://localhost/flex_php/example_return_xml.php?id= {mylist}
  -mylist? TABLE
  -If I try to use a text variable it works for example. {myvar.text} where myvar is a text input
  
  Any idea!

  How can I get using XML?
  I tried to push the table in a textinput & sent the text of entry in php, it worked!

• How to access a document via a URL using docid?

  Hello

  I check the latest version of Oracle WebCenter content. When I create documents with their DOCID I need access to these documents by using the URL like this : http://application-tier server: port/some context/DOCID. Is this possible? When you check the URL that uses Oracle WebCenter content there is no constant URL basis.

  
  Kind regards

  Nestor Boscan

  Hi Nestor,.

  These are examples of URL:

  Document information (metadata) - http://localhost:16200/cs/idcplg? IdcService = DOC_INFO & dID = 804 & dDocName = DocID_000806

  To get the native file - http://localhost:16200/cs/idcplg? IdcService = GET_FILE & dID = 804 & dDocName = DocID_000806 & allowInterrupt = 1

  Please note you need to know is which is the ID of the revision of the document that you are trying to recover.

  HTH

  -Anand

• Navigation after passing parameters to ADF via URL

  How you exit a page after passing parameters via a url as in the method in this link https://blogs.oracle.com/shay/entry/passing_parameters_to_adf_appl?

  I tried to drop this delimited task flow on adfc-config and adding a flow of control to another opinion, but I can't seem to access my opinion of this workflow call.

  In other words, I can call the workflow bounded through a url and pass it a parameter, but once it is posted I can't go to my other point of view.

  How can I do this?

  Thank you

  If you use a wildcard of navigation in the unlimited workflow as shown here https://tompeez.wordpress.com/2013/06/18/jdeveloper-navigation-after-return-from-bounded-task-flow/

  It should work.

  Timo

• Through the Oracle BI Presentation Services filters go URL via a URL

  Hi expert,
  We ara uses a function called "filters to the Oracle BI Presentation Services go URL via a URL."
  However, we are facing a problem that how to pass the value "all" in the reports.
  For example:
  We have a command prompt that contains some values:
  All the
  China
  America
  ..... (lots of data)
  
  
  In Url go:
  When you click a value:
  Saw.dll? Go & Path = / Shared/Test/SB2 & Action = Browse & P0 = 1 & P1 = eq & P2 = Customers.Region & P3 = 1 + China (it's a correct result which display the data of China)
  
  When users click any value:
  Saw.dll? Go & Path = / Shared/Test/SB2 & Action = Browse & P0 = 1 & P1 = eq & P2 = Customers.Region & P3 = nqgtac 1 + "*) (*" (our result shows all the data, but does not show any results) ")"
  
  We know reports don't have all the data, so it displays no data.
  How to implement this requirement?
  Are you facing the same issue? I thank.

  OK, got it.
  In your case means "(tous les choix)" in the prompt of the ordinary. "

  In this case, try don't past not any value for columns in the url, it should be something like
  Saw.dll? Go&path=/shared/test/SB2&action=navigate&p0=1&P1=EQ&P2=customers.region
  In this case for P3 is going to be all the choices
  You must validate the values selected to submit the form.

  OR GOOD
  You can move % using one of these coasters that documented such conditions

  CANY contains one (values & P3).
  call contains all (values & P3).
  as you type % 25 instead of the usual % wildcard. See the following examples

  Published by: svee on August 6, 2012 16:59

• Move the 2 values to 2 elements in the interactive report via a url

  Hello

  I have it here's the url to pass the 2 values to 2 elements in the interactive report via a url

  apex_util.prepare_url ('f? p = & APP_ID.:0 00 :'||: APP_SESSION |':000:P000_STATUS, P000_DATE :'|| ccodes.code, '1 year') in the form of url

  The second value is not passed in, P000_DATE the interactive report item.  "1 year" is the option in the selection list on . I also tried below and a combination of IREQ_, etc., but no worked

  
  

  apex_util.prepare_url ('f? p = & APP_ID.:0 00 :'||: APP_SESSION |':000:P000_STATUS, P000_DATE :'|| ccodes.code,'| 1 year "")

  
  

  Some advice on this one?

  Thank you

  Alexander

  The code doesn't seem right for me

  apex_util.prepare_url ('f? p = & APP_ID.: 0 00 :'||: APP_SESSION |':000:P000_STATUS, P000_DATE :'|| ccodes.code, '1 year') in the form of url

  Ilyalieude modifierlereglement like this.
  

  
  

  apex_util.prepare_url ('f? p = & APP_ID.: 0 00:' |: APP_SESSION |) ": 000:P000_STATUS, P000_DATE:' |" ccodes.code | 1 year") in the form of url

  
  

  Kind regards
  

• How to debug a form (Oracle Forms 11 G) via the URL module

  How to debug a form (Oracle Forms 11 G) via the URL module.
  
  
  
  My server operating system is Unix. Then, I could not able to do forms of debugged by the form developer.
  It displays a message "cannot find module '. Because the system tries to find the module in the Unix system instead of my local system (Windows).
  
  I need to debug module my via a URL.
  I can place the fmb and fmx in path of form in the server.
  
  Please, help me to solve this problem...

  It's a little uncertain. If your goal is to use the form Builder debugger during execution of your form on a Unix machine, this can be done. However, the form must be in working order. So before you try to attach the debugger, you must first be able to start without the debugger. For example:

  http://yourserver:OHS_port_number/forms/frmservlet? form = yourFMX

  Once it works correctly, you can turn on debugging. If your form does not even, using the debugger will not help you because it is designed to solve the problems and not coding configuration problems.

  So, follow these steps to use the debugger:

  http://yourserver:OHS_port_number/forms/frmservlet? form = yourFMX & debug = yes

  This will display a dialog box with information. Do not click OK, but you will need this information to enter in the Forms Designer. Now, open the Forms Designer and click Debug > attach Debug. You will be asked for the information displayed in the dialog box where you tried to start the form. Enter it here (in the constructor), and then click ok in both places. To display the debugger (in Report Builder), click Debug > Debug Console. And then on the toolbar, click the buttons associated with what you want to monitor. Including a breakpoint in your application code is often a more useful way to use the debugger.

  Most of this information is explained in the Forms Builder online help

  I forgot to mention...

  For debug runtime problems, see the deployment of forms here Guide (this implies that you use 11.1.2):

  http://docs.Oracle.com/CD/E38115_01/doc.111210/e24477/appa.htm
  .
  .

  Published by: Michael Ferrante (Oracle) on 21 February 2013 13:45

• is it possible to make nQuireID (session ID) via a URL?

  is it possible to make nQuireID (session ID) via a URL?
  
  (how to read the session ID)?
  
  Therefore, we need not pass the user name and password. (incorporated in the URL)

  Uh, you can't a session ID unless you connect problem first, the chickens and the eggs? Have you looked at application SSO? This is the right way to solve the integration problems, hard-code the user ID and password to the URL is a villain and insecurity 'hack '...

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• How to make a request on a URL using webworks development environment?

  Hey geeks,

  
  

  How to make a request on a URL using webworks development environment?

  
  

  Thanks in advance...!
  

  "A request for a url" you try to perform an ajax call and it does not work? Any field/origin you're wanting access must be white listed in a element in the config.xml file. Details of this are in the WebWorks development guide

• Is it possible to download the zip from a URL using plsql program

  Hi all

  I know that we can obtain xml from url and save this CLOB but is it possible to download a zip file of URL using plsql program.

  Let me google that for you

• How can I get a list of all links/URLS used in all emails Eloqua?

  I try to have a report, list, or the export of all links/URLS never used in e-mail Eloqua (about 250) assets. Is there a quicker, more precise and perhaps automated to do this other than to pick up manually?

  Basically the desired result is a list of all links/URLS used in an Excel worksheet, additional information is a plus.

  If there are ways through the API, it is also welcomed.

  The Web site is subject to a few changes and we would like to keep all links living in them the remapping to the end server.

  Hi all

  First two ideas come to mind:

  1. go to Insight and run the Email clicks link ventilation report to see the links and clicks used in various emails. This will allow you to search for links to the last 730 days. However, note that if you have an abundance of links, the report may timeout. This is why the guests page, you may need to search specifically for a range of dates (month or two at a time) until you have all the expected results.

  2. using other APIs. The live docs for Rest API include the ability to search hyperlinks in emails. For instructions to access the direct documentation, see the Oracle Support Document 2078514.1 (how access rest and bulk API Live Docs) to: https://support.oracle.com/epmos/faces/DocumentDisplay?id=2078514.1. Once inside the live docs do the following:

  • Click on liabilities
  • Click/assets/hyperlinks
  • Expand the Hypertext GET/assets/links
  • Entry 'Complete' in depth to make sure that you check out the URL for each hyperlink

  Let me know if it helps!

  Best regards

  Matt Goodman

• Pass the product ID through the URL of the payment page for the 'reception - buy' landing page. is this possible?

  Pass the product ID through the URL of the payment page for the 'reception - buy' landing page. is this possible?

  You can just the module module_shoppingcartsummary and liquid, you can return the items in the basket to.

  The developer reference

• We can access autogen_dimensions.xml file via a URL?

  Hello
  
  We can access autogen_dimensions.xml file via a URL?
  
  Is it possible to access the file autogen_dimensions.xml with the URL as shown below.
  
  http://host:port / < App name > /Data/State/autogen_dimensions.xml file. I want to read this file in my java class.
  
  Kind regards
  Ravinder P

  Service platform is delivered with 2 copies of the reference application. The folder that you noted is not functional, for reference.

  Who is running is located at:

  \Endeca\PlatformServices\6.1.2\tools\server\webapps\endeca_jspref

  You should be able to just drag the files in there.