Navigation after passing parameters to ADF via URL

Similar Questions

• Passing parameters to FMX via windows CMD

  Hi all!
  
  is it possible to run a windows form command line and pass some parameters specific to this form?
  
  for example,.
  -----
  [START_FORM.bat
  
  module c:\orawin95\bin\ifrun60.exe = myForm * < pass the syntax of the parameters > * userid=user1/user1_pass@oraInst
  
  ]
  -----
  
  Next command displaying information about the use of ifrun60 and I think that the passage of parameters to a form is not provided.
  ifrun60?
  
  Thanx

  Hello

  You can pass command line parameters (regardless of the settings you wish to). However, it is useless if you do not have these parameters added to your form. Also, if you do not change the code, then you can't do anything about it either in passing parameters. You will eventually get the parameter does not exist in the form of error.

  So the question is, what you're trying to achieve? (And what you want to achieve, you need to touch the source of your form).

  Arun-

• Passing parameters to the URL - availability in the new process of request

  Hello

  I am able to pass parameters in the URL of the APEX that defined the points of the application as below

  : http://application-tier server: port/pls/apexdev/f? p = 1001:1:APP_CLIENT_NUMBER, APPLICATION_NUMBER:0001285, 0000051:

  I would like to get and set other items based on elements of application passed as parameters. I would like to only enter once application.

  I found the best place for this action in a process of application with Point on new Instance of Process.

  The problem seems to be that the value of point of application has not been set at this point, and therefore the values are null.

  If I change the application process process Point to something that runs to each page as On Load: after the header, then the values are available. It is not suitable as only wish to run once at startup of the application.

  I can't find discussion of this documentation.

  1. I would be able to access URL parameters in the application process with Point on a new Instance of the process?

  2. are there any other equivalent task for access to URL parameters at the start of the application?

  Thank you

  Hello

  APEX runs only on the new process Instance when a new session has been set up. As you discovered, URL items are not yet saved in session at this point State. You can use a level app process before header instead, with a condition that makes that make it run when certain elements that you want to initialize are null.

  Kind regards

  Christian

• Passing parameters from one page to another in ADF Oracle 11g Release 2

  Hello
  I'm developing an Application of Web Java EE very simple, in this I am filling a grid (table) on the first screen and on the selection of a line in this screen, I have to display the records in a form, in the next page.
  I want to transmit the information of primary keys from the grid screen to the shape of the screen (2nd page) and use this information to render the data, eventually, I'll have to perform CRUD operations.
  Please let me know how to pass parameters from page 1 to page 2 and use this data in the page 2 to return the records, Oracle ADF 11 g R2.
  
  Thank you.
  Rajat
  http://rajatnigam1.blogspot.com
  
  Published by: RajatNigam on July 4, 2012 13:16

  Same page or another page - it's all the same technique.

• Passing parameters in URL

  Hello
  
  Bit of a newbie here question.
  
  I am passing the parameter via URL:
  
  ? IMG = study_1_img
  
  In the next page, I'll put it as a variable:
  
  < CFSET image = "#URL.img #" >
  
  I then ask my DB:
  
  SELECT #image # FROM [tablename]
  
  However, when I got out, it returns the value of the variable:
  
  < CFOUTPUT >
  #image #.
  < / CFOUTPUT >
  
  What I want is the value of the query, not the variable. What should I do?
  
  Help would be much appreciated!

  Thank you all; in the end, I went for a different solution, but the solution to my original problem was indeed:

  

  Thanks a lot for all the help

• Pass parameters to GO URL help - how to get the real URL?

  Hi gurus,
  
  I'm testing a method of passing dimensional values of the main report to detail report by clicking on the measured value in the main report. The idea is to convert the measurement column in a href HTML column, so it can pass parameters to the 2nd report using the URL GO.
  
  What I entered in the formula tab, it is like this:
  ''|| CAST ("sales facts". ("' Quantity ' AS CHAR (50)): ''
  
  Now when I click on the value of the measure, it can refer to the detailed report but cannot pass parameters. I have already added FILTERS to this report and set with clause IS GUEST.
  
  I have no idea why it cannot work because I do not see the actual URL, it has generated. The URL at the bottom of the page is incomplete.
  
  Is it possible to get the real URL? Expected my feasible approach?
  
  Concerning
  Jeffrey

  P2 is the target and P3 is the source column. P2 should be replacement of 20% for spaces.

  P2 = customer. "% 20Region" & P3 ='| " Clients. "" Country region |

  There are many examples of correct GO the URL code here in the forum, you just find it. :-)

  Concerning
  Goran
  http://108obiee.blogspot.com

• Pop-up - passing parameters

  I need some help w / pop-up windows and pass parameters in both directions.
  
  Page 7 (reports page), I have:
  -TXT_P7_SALESREP displays the name of the sales reps selected, by default, all the
  -CMD_P7_PICKSALESREP opens the popup window when you click
  -H_P7_SALESREPIDLIST stores the list of IDS (used to generate the report) currently selected sales rep
  
  Page 10 (page popup), I have:
  -CBL_P10_SALESREP a list check box, all of the VRP (by name)
  -H_P10_SALESREPIDLIST stores a list of the IDS of representative sales currently selected
  -CMD_P10_OK to submit the changes and close the page
  -CMD_P10_CANCEL to close the window without saving changes (I got this work already through the process of close popup window)
  
  The process should be something like:

  1) User opens report page, 'All' is displayed in the text box, and H_P7_SALESREPIDLIST contains all the sales rep ids 
  2) User clicks CMD_P7_PICKSALESREP to change list of sales reps 
        2a) Popup window opens & the value of H_P10_SALESREPIDLIST is set to the value of H_P7_SALESREPIDLIST
        2b) CBL_P10_SALESREP has values checked based on the value of H_P10_SALESREPIDLIST (all by default, but a user could change sales reps multiple times)
  3) User makes their changes and hits OK
        3a) Value of H_P10_SALESREPIDLIST is updated w/ list of currently selected sales reps
        3b) Value of H_P7_SALESREPIDLIST is updated w/ the value of H_P10_SALESREPIDLIST
        3c) Popup window is closed, returning the user to the report page
        3d) TXT_P7_SALESREP is updated via the contents of H_P7_SALESREPIDLIST
  4) User runs the report which is processed/displayed based on the values of H_P7_SALESREPIDLIST

  I tried to put some javascript:popupURL('f?p=&APP_ID.:10:&SESSION.::NO::H_P10_SALESREPIDLIST:&H_P7_SALESREPIDLIST'); in the target URL for CMD_P7_PICKSALESREP, but it did not work. I don't know enough about the passage of parameters and APEX-details to implement myself. Any help would be appreciated.
  
  I prefer this w / do as little javascript as possible coding, but I understand that it may be necessary.

  Hmmmm, this is weird @ no alerts

  Probably a syntax error in the JS (missing order, quote, brackets etc.)?

  CITY

• passing parameters between different areas to help Navigate the column

  Hi all
  
  I know I can pass parameters between the reports through a few subjects by using Url go. However, I want to keep the functionality of the menu displayed when you use defyining multi target in the s column Navigate with drop-down feature. So the problem I encountered is the sequel
  
  (1) when I set some goals to navigate - is it possible to transfer parameters to these links point to destinations? (I tried to add them at the end of the link in the field "Target", but without success)
  
  (2) or alternatively - when you use GoUrl, can I define a < would display a href link that might point to places menu and mulitple drop down?
  
  I really appreciate your help with above
  Best regards
  Wojtek
  
  Published by: user1291979 on October 7, 2009 11:51

  -without add nothing more to this link, selected GEOGRAPHY. COUNTRIES must be passed to destination and > must complete guest there? It works that way in my environment

  If you are using navigation on the current query column properties and component the dashboard then the query current source column is analyzed on the quick dash in both have SAME_TABLE. The names of SAME_COLUMN, else parameter is not parsed.

  Target: / shared/Adecco01/_portal/01 edge/weekly table dashboard
  You don't enter anything

  He must complete only the GEOGRAPHY. COUNTRIES in the reports within the area where the source report comes from?

  If you use the navigation on the properties of the column and the call to another then asks the current column is analyzed on the query target only if in the SAME_TABLE target. SAME_COLUMN value IS INVITED, another parameter is not parsed. Report of the target and the source may be on different areas but we need SAME_TABLE. Names of SAME_COLUMN.

  If you use GO URL, URL of the dashboard EDGE or the other, I already explained.

  Concerning
  Goran
  http://108obiee.blogspot.com

• How to run and pass parameters to the exe file in the txt file.

  Hello

  I am facing problem with passing parameters in the .exe file, which is run by labview.firstly that I have script .txt with the settings that I have to go to the .exe file. This .exe file is also a software, and this script is written for her. And now I have to create program in labview which should satisfy the following points.

  1. I have to use a button named "Run script". If I pressed the button, it should open the browser where I can choose the script .txt file.

  2 .exe application is expected open(Path already chossen).

  3. After passing the .exe application settings should be closed.

  4 and labview should now update its parameter

  I just open using Exce.vi .exe file, but I didn't get any idea to do more than this.can someone please help me?

  Thanks norbert. CAN I love it? What should I change now? VI attached below...

• PowerCLI pass parameters

  Hello

  I want to pass parameters to my scriptblock in invoke-vmscript

  $a = "Hello".

  = {} Scriptblock

  Param ($Outside)

  write-host "Hello".

  $b = $outside

  }

  invoke vmScript - vm VM - GuestCredential Hello - ScriptText $ScribtBlock - arguementlist ($a)

  The ScriptText parameter requires a string not a script block in the direction of PowerShell.

  Substituting the parameters becomes much easier this way

  param(
  [string]$port,[string]$creds)
  
  $scriptblock= "{
  `$url=http://localhost:$port/ write-host `$url}
  "
  Invoke-VMScript -VM VM -GuestCredential $GuestCredential -ScriptText $ScriptBlock
  

  Note how you can use the escape character (backtick) to spend the dollar sign

• pass parameters to the pop-up window using skillbuilder

  All,
  
  I have a request of dynamic content on page 1 and for some lines ive the pop-up link another page and pass the EMPID clicked on page popupped. Ive created the link and its popping up the second page correctly, but how I have the pass of the EMPID per second / page popup?

  part of query in page1 like this,
  htp.p('<td><a href="#" class="show-summary" onclick="return false;">'||cursor-id.EMPID||'< . . . . . 

  Thank you.

  Gor_Mahia wrote:
  Jorge,

  IAM but perhaps not very clear what you did ive tried it before, but it losses the modal pop-up window and navigate to this page, I really try to have my modal popup window. Look at my request below,

  You just described a completely different problem from that of passing parameters modal page.
  Just add a more real Action "Cancel the event" after the action of modal Page.
  What that will do is replace the click of the anchor who want to access the link HREF.

  Thank you
  -Jorge

• HashMap allows to pass parameters? -Jdev 11.1.2.3

  Hello:
  
  In a managed Bean, I created a HashMap and generated accessors.
  
  private HashMap < String, String > hm = new HashMap < String, String > ();
  
  In EL, I refer to the HashMap with something like:
  
  #{Test_Hashmap_Bean.hm ['overdue_key']} which returns the value and works well.
  
  The Get accessor of the Bean inside, how can I determine which key was used to return the value? In other works, I need to know that 'overdue_key' was used to get the value of the Get accessor.
  
  How can I detect it?
  
  I'm trying to simulate passing parameters to a java method of EL.
  
  
  Top of page 34 of the Oracle Fusion developer's Guide, Frank mentions it is possible, but gives no details. Can anyone provide an example of using a HashMap pass a parameter to a java method of EL?
  
  Thanks for the help.

  Class MyHashMap

  import java.util.HashMap;
  import java.util.logging.Level;
  
  import oracle.adf.share.logging.ADFLogger;
  public class MyHashMap extends HashMap {
      private static ADFLogger logger = ADFLogger.createADFLogger(MyHashMap.class);
      private static final long serialVersionUID = 0L;
  
      public MyHashMap() {
          super();
      }
  
      public MyHashMap(int i) {
          super(i);
      }
  
      public MyHashMap(int i, float f) {
          super(i, f);
      }
  
      @Override
      public V get(Object key) {
          if (logger.isLoggable(Level.INFO)) {
              StringBuilder logMsg = new StringBuilder("Key: " + key);
  
              logger.info(logMsg.toString());
          }
          return super.get(key);
      }
  }
  

  Then you use in your bena

  MyHashMap mh = new HashMap();
  

  The rest you can use as is, you get the key in the get (Object key) method. In the code above in the log message.

  Timo

• Pass parameters in a DPS application

  I have an app from the DPS with 2 slots. A slot contains a built-in code that is supposed to show a list of goods. A slot contains code that launches an external site in a frame within the DPS app.

  In accordance with article API Marketing consumer news | Adobe Developer Connection, it is possible to pass parameters to an external application to a DPS application.

  I'm running a problem. In my external site, I try to call the DPS application like so dpsapp://v1/slot/storefront?path=/content/test.pdf via a button.  What I noticed is that when I do that, the soft switches on the side window but urlPath queryingthe or urlQueryString returns a null value.

  It seems that I can't pass a parameter to the DPS app within a single application. If I load the external website in Safari, I'm able to query for the parameters.

  Am I missing a step here or isn't it possible?

  Thank you

  You need manage paths... the first is when the application has failed.  In this case, just use the code in the previous post ('companyName' change 'path').  However, if the application worked, but it is backgrounded, so you must have annexed a listener for the event event.

  That is to say. adobeDPS.configurationService.applicationContextUpdatedSignal.add (this.updateContext, this);

  And then your method "updateContext" navigate the urlQueryString as previously indicated.

  Additionally, make sure that you have included "showcase" in the "name of the Goto link" when you set your custom button.

• Passing parameters to bounded taskflow doubt

  Hello
  
  I tested the variable scopes during the call to the stubborn workflow.
  
  I have read the documentation on passing parameters to BTF.
  
  [http://download.oracle.com/docs/cd/E21764_01/web.1111/b31974/taskflows_parameters.htm#CHDIAIJJ]
  
  I have a guy in section 16.6 that say
  
  + If a stubborn workflow is implemented using a call activity of workflow, such as a region ADF or as a dynamic of the ADF region, you can specify parameter values using the standard EL expression syntax. For example, you can specify parameters using the #{bindings.bindingId.inputValue} or #{bindings.bindingId} or simply the syntax #{inputValue}. +
  
  That my guy is when I specify the value of the setting that I have to go must I use binding.something.inputValue or I can use someOthersScopes.myValue or something else.
  
  Thank you
  
  Published by: DV on 26 - it is a-2011 17:51
  
  Published by: DV on 30 - it is a-2011 11:39

  Hello

  Popup is called before Gets the value through setPropertyListener command, so the value is not be assigned to the param pageflowscope by the time popup is displayed, then the behavior observed.

  You must use in the manner set out in this doc pass parameter to a parent page/taskflow.

  Here is the code example:

  
    
       
      
    
    
    
      
       
    
  
  
  Popup code:
  
    
    
    
        
    
  
  
  Finally, retrieve the value from viewScope in pagedef:
  
       
            
       
  
  

  Jean Lou

• Passing parameters from HTML to Flash Object

  I know it must be very simple, but following the examples I can find on passing parameters from HTML to my Flash application, I have not been successful. I would like to find a relatively common using AS3, Flash CS4 example.

  If it helps, I need to pass the url of an XML file to the flash application so that it can get instructions on what it is supposed to play. We want to do in this way because we do not control the web site so that we can not just leave the XML file on the server and maintain as needed.

  I don't know if I'm just making typo or what. Share and other snippets of it would be greatly appreciated.

  Thanks for any help.

  Hey I think I know what you need to do, try this "" in the HTML code, and then create a Flash var like this:

  var xmlURL:String = this.loaderInfo.parameters.xmlURL;

  chance!, tell me if it works