Cable D5000T

Similar Questions

• D5000t NVIDIA GTX 260/280/285 video card

  Has anyone tried to install a GTX 260/280/285 graphics card in a desktop HP d5000t? It matched?

  Message edited by d5000tuser on 07/02/2009 11:55

  Today received the EVGA GTX 285 and installed without any problems. It fits without having to remove the cable plastic between the right edge of the motherboard and the drive cage. It does not cover the top of page two connectors SATA making it unusable with the connectors supplied with the d5000t. May be trying a right angle SATA connector if I need to use them in the future.

  I'll try to post a few pictures before and after, when I had the chance.

  Message edited by d5000tuser on 02/20/2009 17:48

• Ethernet, says "cable disconnected".

  Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

  Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

• Apple TV with no cable?

  If I disconnect the cable tv, Apple TV will work?

  No. a HDMI cable is necessary and one internet connection.

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• do not connect not lightning cable

  All cable brightening, Apple or others, I use to connect to my iPhone 6, I have to move the insert head into the receptacle of the iPhone so he could load, usually push it again.  He then releases and I push it again to connect to the load or on my Mac.  Is this a defect in the receptacle for iPhone 6plus or are there other reasons?

  Thank you

  Stuart

  Hello

  Follow the steps here, including check for any debris loading port and/or contact our Apple support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

• How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

  Hello

  How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

  You can network or target mode a mac computer

  OS X Lion mountain: connect to shared computers and servers for files on a network

  Share files between two computers with target - Apple Support disk mode

  However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• When I plug it in the optical adapter and cable for Mac book and the receiver no sound?

  Trying to play digital sound with an optical cable to my Mac Book Pro to a HK integrated amplifier.

  No sound.

  Any ideas?

  What output is selected in system preferences > sound > output?

  Optics even figure?

• iPhone is as a replacement for cable inet?

  I currently have the following:

  cable Internet > > > > > > netgear n600 cable modem > > > > > > > > wifi in condo...

  I would like to replace my internet cable with my iphone of themselves with data unlimited gives me the following...

  unlimited internet data via iphone is > > > > > > netgear n600 cable modem > > > > > > > > > > wifi in condo...

  is there a way for me to do?

  No way to do it, but if your business provides access and use of the Hotspot of the phone, you can use it to provide internet service via wi - fi on the hotspot. However, the carrier must support the use of the Hotspot feature. You can not connect the iPhone to a modem to provide internet services.

  It also means that the phone must be in the location of the others get a wi - fi connection to this place.

• How to connect an external device via an Ethernet cable with iPad Air?

  I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

  LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

  You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications

• iOS10 update; iPad 2 Air not USB load with certified Amazon lightning cable

  iPad 2 Air and iOS 10: been using an Amazon certified cable lighting to load and iTunes connect via the USB port of > 1 year without any problem. Updated to iOS 10, now the certified cable doesn't load a USB port. It always connects to iTunes, but the sign of the battery flashes the fresh green symbol for 1 second then said stops and says 'no charge '. Tried on 2 USBs and 2 PC with the same result. Tried another brand cable via USB and it costs.

  When I plug this cable from Amazon in the wall charger, it will load. Seems to be something with the iOS10 not recognize the USB load now on this certified cable. I didn't call Apple support on that too, they have no idea what's going on. Their answer is to use an Apple cable of course. Any help is appreciated.

  The cable of the Amazon is located here:

  https://www.Amazon.com/DP/B010U3XVMU/ref=cm_cr_ryp_prd_ttl_sol_0

  It seems there is no real solution beyond using another cable. There were a few people with this problem since iOS10 came out, so it's likely Apple changed something in the settings. As they changed it, it's either a mistake which will mysteriously set with the next update or it's going to be permanent.

• With the help of TC as a bridge between the Linksys router.  TC will be connected by a cable ethernet to another building.  Will this work? Help.

  Need to get wireless to my workshop about 70 feet from the House.  Linksys router connect to the Hughes Net modem uses.  I have a new time Capsule I would like to set up in the workshop.  I have an ethernet cable from my house to the workshop.  (Had bad lighting storm last week and knocked out two Linksys routers.  TVs all otherwise not serious!  Need help, TC inlays.

  Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.

• Fake iPhone cables will be able to send the update of information?

  So I am currently out of the USA for a few days and my oringal cable broken.

  I have another charger, but it doesn't move information from itunes to my iphone

  so I decided to buy a cheap cable that can just to update to iOS 10. Is it ok if I use this cable, I really want to go and download iOS 10 live isn't my thing?

  I suggest you wait you can get a good Apple or made for iPhone cable. You don't need really iOS 10, and is not a material value of your phone, threatening to get a few days earlier. While some cheap cables are OK, there is no way to know if the one you got is good, or whether it will fry the charging of the phone circuit.

• iPhone 6 s most do not recognize the official cable apple

  Hello, please help me with this problem.

  I have a iphone 6 s more bought from Vodafone Romania with contract.

  I have a problem with the official cable, not recognized by the phone, pc (windows 8.1).

  I had installed until the night last ios 9.3.5, now ios10.

  I tried with other cables (also official), not work.

  All these cables worked with my wife phone.

  The phone is charging when connected, but not recognized (this cable is not...)

  I mention that the phone had / have No jailbreak, it was not broken, get wet or.

  Please notify.

  Have you checked that the docking port is free of any debris or lint?

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again may also work. You won't lose data.