Passwords are in the computer (checked in the Security section), but are not not in Firefox

Similar Questions

• When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  This looks like a utility Acer protect disk hard & possibly also the BIOS.  You will need to consult your manual for Acer.  You have configured a password of HDD that you are now trying to recover, by chance?  This recovery is not possible if the hard drive has been password protected.

  If it was a Windows login screen then it would show your user/admin name and password entry area & would be clearly identified as a Windows form of the version of Windows being displayed at the bottom of the screen.

• I want the security on but warning not to arrive on the screen every time and click on it

  Security warning pop up

  Hello

  1. What warning you talk about safety?

  2. when exactly you get pop-up window?

  3. are you referring to the user account control settings?

  If you're referring to user account control, I suggest you to return these items and check if it helps:

  User account control

  http://Windows.Microsoft.com/en-us/Windows7/products/features/user-account-control

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  How can I change the behavior of user account control by using the slider?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

• Thunderbird does not accept the user name and password, an error that the user name and password are not correct

  Thunderbird esteem username and password are not correct,

  Gmail account?

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  original title: Solution Center?

  I think that the solution center is a part of HP.  I go to programs - run and type msconfig.  Click the Startup tab and look for Solution Center, then uncheck the box so that it will not start then click on apply and restart the computer

  Or
  You can put in the HP printer drive and re install the printer that can also work.  Hope this helps

• BlackBerry App Blackberry ID forgot password and answer the security question

  Hi, I have a Curve 9360 and I forgot the password for my Blackberry. Not enough, I also forgotten the answer to my security question. Is it possible to reset my password without answering the security question?

  royalkarin wrote:
  But when I try to login, I get the following error "enter the username associated with the smartphone.

  You will need for security wipe the device first.

  How to change BlackBerry smart phone associated with a BlackBerry Internet Service account

  I know that you use the same email address, but it's actually a new BlackBerryID.

• Downloaded & instaled DC Pro... click on the launch button, but has not started. Installed MGP checked and it has not installed.  Suggestions?

  Downloaded and installed DC Pro 30-day trial.  After installation, click on the launch button, but has not started. Installed MGP checked and it has not installed.  Suggestions?

  XP is not compatible with acrobat dc.  You must win 7 or better, system requirements | Adobe Acrobat Pro DC, Acrobat Standard DC

• How to install adobe on 2nd computer when we have a license but do not know the number?

  How to install adobe on 2nd computer when we have a license but do not know the number?

  You must have your serial number to install a version of the software that requires a serial number

  Lost information - response #1 in https://forums.adobe.com/thread/2008767 (for Mac or Windows programs)

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• Computer says that CS6 is installed, but can not find the program

  Computer says that CS6 is installed, but can not find the program

  Hi Chuck,

  It seems that you have a 32-bit operating system installed and Premiere Pro is not a 32-bit application. This seems to be a problem in the creative cloud desktop application.

  Thank you

  Regalo

• Want to re - install elements 8 on the new computer, the serial number, but can not find the download button on the adobe Web site to do so.

  Want to re - install elements 8 on the new computer, the serial number, but can not find the download button on the adobe Web site to do so.

  Hello laetitiah

  Please visit: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

  Follow the instructions on the page to begin your download... Use your serial key to activate it

  ~ Mandy

• Error: Initiator has tried to get around the security phase, but we cannot

  Hello

  I started working on the new company and tonight we lost storage for about an hour and mistakes came:

  SAN1 storage array error event
  subsystem: MgmtExec
  event: 7.4.3
  time: Sun Apr 21 00:58:18 2013
  "connection iSCSI to target '10.10.10.21:3260, iqn.2001-05.com.equallogic:4-52aed6-cb0bdf198-eee0000000c50212-vss-control' initiator ' 10.10.10.22:53396, iqn.1991 - 05.com.microsoft:sp2 - vm - sql2.company.local' failed for the following reason:
  Initiator has tried to circumvent the security phase, but we cannot.

  On windows this evening first errors began:

  EventID: 4025
  Source: EqualLogic
  connection error iSCSI 0xefff0009 connecting to the vss-control for the 10.10.10.41 group volume

  Event ID: 10
  Source: iScsiPrt
  Logon request failed. The login response packet is given in the dump data.

  These errors I see repetition of the past in the Windows event log.

  It is hyper-v virtual SQL cluster with iSCI Dell storage connection.

  How to solve this problem?

  Thank you

  Hello

  Vss control volume, which is used my MS Volume Shadow service to access the clichés of material, there's a GUY configured username. However, the initiator does not send a name of user and password c...

  If you use the EQL TYPING kit, then you should allow these servers access to this volume.  Or change the ACL on this volume to allow that the servers that need to access.

  Alternatively, you can remove it from the Favorites tab, so that he tries to log in the next time the server starts.

  Finally, you can enable the discovery of prevnet filter this of is re - produce.

  Here is a KB from the Equallogic Web site.

  Solution title error: "initiator wanted to ignore the security phase but we can not." or "initiator has tried to circumvent the security phase but we cannot."

  Symptom of solution of details: event on the web interface of PS log table shows a connection error for a volume that says: "initiator wanted to ignore the security phase but we cannot." This error can be repeated continuously every few seconds.

  Question: by default, volumes that have enabled CHAP authentication will be shown during the process of iSCSI discovery even if the initiator does not have the authentication information c. Discovery is controlled by its address IP ACL, so if a machine matches the IP address of the ACL scope, we will see the volume. Note that multiple initiators such as those that are unix based as the initiator of the Cisco software that uses VMWare will continue to attempt to connect to the target (often, every two seconds), even if each connection attempt fails. This can fill the paper and the performance of the server can have an impact.

  Solution: Limit the discovery of volumes CHAP authenticated by IP address and ensure that only servers with appropriate credentials CHAP can observe the volume at all.

  The most common volume to see this error on is the special volume named "vss control." This volume is for communication with Microsoft's VSS service, using EqualLogic host integration tools. If it is configured for unlimited access, or is configured for the CHAP only, then each initiator on the SAN will be able to find out and may attempt to use it. Set ACL "vss-admin" to enter an IP address for each machine that needs to access, to ensure that no one else does.

  For firmware version 2.2.3 and, before going to the volume named 'vss-control', select the Access tab and change the entries here in a proper way.

  For the later version 2.3.2 (including all versions 3.X) firmware, go to the Configuration Group box and select the VSS/VDS. It's the ACL for the vss-control volume, which you should change as appropriate.

  It may be necessary to restart servers that try to access this volume after changing the ACLs, however. Some initiators do not release a target once they have discovered, even though the table indicates that the target does not exist. An example of this are ESX servers, using the software initiator.

  A second scenario may be a volume that is configured to be seen from in a VMWare server VM Windows using CHAP credentials and also install on the table to use a single connection Cap. Even if the credentials CHAP is setup correctly on each side if the ESX Server uses the software initiator that ESX will attempt to connect to the volume permanently every minutes or seconds depending on factors both. With configuration to several volumes in this way, it can be a drain on performance on ESX.

  To troubleshoot this scenario make sure to activate the iSCSI discovery of the IUG table of PS filter. This is done from the Group/iSCSI Configuration tab. check the box off and save the configuration using the Green disk icon in the upper right of the graphical interface. This makes the servers with the initiators that are correctly setup to see a volume with CHAP will see and try to connect to these volumes. Note: once an ESX Server has seen a volume to continue to try to connect with the software initiator until the ESX Server is restarted after this option is turned on.

  Note that, since the version of the firmware 3.0.5 and later, you can require authentication for CHAP-enabled volumes during discovery, by issuing the command in the CLI:

  GroupName > enable discovery-use-chap grpparams

  Kind regards

• Once I refreshed, when I go to pull down to a previous visit, it loads the address bar, but will not go on the site.

  Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP

  You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.

  • Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0

  Make sure that you are not Firefox running in compatibility mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K