patch/group of hotfixes to level 10.2.0.3 for 10.2.0.4 on Windows Vista

Similar Questions

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• RLM #9 on the Group of hotfixes SOA 10.1.3.4.0 for OEL r5 u3

  Hello
  I try to install MLR #9 on SOA 10.1.3.4.0 fixes group. Operating system is OEL 5 u3 64bits. Can you get it someone please let me know where can I download the installer?
  Kind regards
  
  Vasundhara

  Yes, I was able to apply the patchset:10.1.3.4.0

  Ok. then-
  (1) download the Patch 6880880 to my Support of Oracle.
  (2) follow the instructions in the README file to upgrade OPatch.
  (3) now apply Patch 8589928.

  Kind regards
  Anuj

• The Group of hotfixes check Oracle and the set of patches available

  Hello
  
  Is there a documentation available on metalink or in the forum regarding

  existing patches group looking for oracle DB, clusterware & applications. Oracle Server

  and

  that the recommended placement group of patches from oracle for patches existing for above items group?

  Thank you

  Please read the note of My Oracle Support * ALERT: Oracle 11 g Release 1 (11.1) Support Status and alerts [454507.1 ID] *.

  Such a document exists for each major version of Oracle database: 10.1, 10.2, 11.1 and 11.2, etc..

  Edited by: P. Forstmann may 25, 2010 16:26

• Reapply the 10.2.0.5 patch group after the installation of gateway dg4msql

  Hello
  
  I patched a RDBMS with a 10.2.0.5 10.2.0.1 (64-bit) Group of hotfixes without any problem and installed a gateway dg4msql - also without problem. The dblink to sql server works fine.
  
  But:
  
  on notes 562509.1 on metalink, the instructions indicate expressly that if you install a gateway in an oracle existing home and you have previously patched oracle home, then you must reapply the patch group.
  
  When I tried to apply the Group of hotfixes again (I disabled the listener and stop the database), says it all the prerequisite check is OK, but on the very next step I have an error message:
  
  Abnormal termination of the program. An internal error has occurred. Please provide me with the following files to the Support of Oracle:
  
  "/ oracle/oraInventory/logs/installActions2011-11-04_08-27-30AM.log".
  "/ oracle/oraInventory/logs/oraInstall2011-11-04_08-27-30AM.err".
  "/ oracle/oraInventory/logs/oraInstall2011-11-04_08-27-30AM.out".
  
  The .log file contains nothing extraordinary except the error message at the end with no further explanation. The .err file contains the following:
  
  Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/purtic/OiixGeneralQueries took place...
  java.lang.NoClassDefFoundError: oracle/sysman/oii/purtic/OiixGeneralQueries
  at getOSName.performQuery(getOSName.java:16)
  at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2513)
  at Components.oracle.odbc.ic.v10_2_0_5_0.CompContext.getCalculatedValueObject_PRE_REQUISITE (unknown Source)
  at Components.oracle.odbc.ic.v10_2_0_5_0.CompContext.getCalculatedValueObject (unknown Source)
  at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:654)
  at oracle.sysman.oii.oiis.OiisPreRequisiteVar.getCalculatedValue(OiisPreRequisiteVar.java:155)
  at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2439)
  at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2124)
  at oracle.sysman.oii.oiis.OiisCompInstallation.getPreRequisite(OiisCompInstallation.java:831)
  at oracle.sysman.oii.oiis.OiisCompInstallation.getContext(OiisCompInstallation.java:521)
  at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.checkPreReq(OiiodDepEngine.java:5116)
  at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.depModeApply(OiiodDepEngine.java:2548)
  at oracle.sysman.oii.oiif.oiifw.OiifwPostDepModesWCCE.doOperation(OiifwPostDepModesWCCE.java:330)
  at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
  at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:450)
  at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
  at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1286)
  at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
  at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
  at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
  at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
  
  I can't understand what could be the problem. Mistakes don't say anything about the missing libraries (as I have seen problems on other similar topics).
  
  I also provide the release of "opatch lsinventory", if this is useful:
  
  Citing O Patch 11.1 .0.6.6
  
  Setup Oracle interim Patch version 11.1.0.6.6
  Copyright (c) 2009, Oracle Corporation. All rights reserved.
  
  
  Oracle home: /oracle/product/10.2.0/ora10
  Inventory Center: / oracle/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 11.1.0.6.6
  YES version: 11.2.0.1.0
  YES location: /oracle/product/10.2.0/ora10/oui
  Location of the log file: /oracle/product/10.2.0/ora10/cfgtoollogs/opatch/opatch2011-11-04_14-41-17PM.log
  
  History of patch file: /oracle/product/10.2.0/ora10/cfgtoollogs/opatch/opatch_history.txt
  
  Location of the output file Lsinventory: /oracle/product/10.2.0/ora10/cfgtoollogs/opatch/lsinv/lsinventory2011-11-04_14-41-17PM.txt
  
  --------------------------------------------------------------------------------
  Products of top-level installed (3):
  
  Oracle Database 10g 10.2.0.1.0
  Oracle Database 10g Release 2 Patch Set 4 10.2.0.5.0
  Oracle 11.2.0.1.0 database gateways
  There are 3 products in this House of Oracle.
  
  
  There is no temporary patch installed in this House of Oracle.
  
  
  --------------------------------------------------------------------------------
  
  OPatch succeeded.
  
  Maybe it has something to do with the OPatch version (is it too new to the 10.2.0.5 patch group?)
  
  The operating system I use is the version of the Oracle Linux 5 kernel: 2.6.18 - 194.el5
  
  I hope someone could shed some light on my problem.
  
  Thank you in advance and best regards
  
  BL

  Hello
  Instructions on the re - apply patches to existing facilities apply only when the ORACLE_HOME directories are running the same version.
  You have 10.2 and 11.2, but these must be completely different and separate the ORACLE_HOME directory. You can not install different versions of Oracle in the same ORACLE_HOME.
  Could you specify which group of patches you applied that ORACLE_HOME?
  If you have applied the 10.2.0.5 patch group to the 10.2.0.1, then you don't need to apply any group of hotfixes to the ORACLE_HOME 11.2, and you should not apply the Group of hotfixes 11.2 to ORACLE_HOME 10.2.

  If you have applied the patches the 10.2 11.2 group OH, then you need to restore the software of 10.2 in the 10.2 OH as it will be corrupted by the 11.2 software.

  Kind regards
  Mike

• Group of hotfixes HRMS

  Hi all
  
  I must apply Oracle HRMS Family Pack K ORS 4 in 11i, but what is my current level of Group of patches that I don't know.
  Please suggest me the sql query I need to run to find out my current level of the Group of hotfixes
  
  Regds,

  Hello

  Please refer to (Note: 414631.1 - SQL: HRMS product Installation status). Or, you can run Patchsets.sh (Note: patchsets.sh - Oracle Applications patch utility comparison group - 139684.1).

  Kind regards
  Hussein

• ID of the Group of hotfixes

  Hello
  
  I just want to confirm if the patch set ID 4547809 is good to install 9.2.0.8 group of patches on Linux 64-bit platform.

  I meant if you have invalid objects prior to the Group of hotfixes, and if they are valid, it's good for you.
  If you had invalid objects before the Group of hotfixes, and if they are not still valid after the Group of hotfixes so I do not, you can do a lot.
  If you had all the objects that were valid before the Group of hotfixes, and if they become invalid after the Group of hotfixes and then we must look at why he becomes disabled and try to make it valid.

  Concerning
  Anurag

• Impossible to apply the 10.2.0.3 for 10.2.0.4 patches group

  Hi gurus,
  
  
  Oracle version: 10.2.0.3
  Operating system: Linux 2.6.18 qtl1-251 - 164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 i686 i386 GNU/Linux
  
  Yesterday, I was able to make the Group of hotfixes in 10.2.0.1 10.2.0.3 but now I am facing problem check operating system has failed.
  

  [oracle@qtl1-251 Disk1]$ ./runInstaller 
  Starting Oracle Universal Installer...
  
  Checking installer requirements...
  
  Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1, asianux-2 or asianux-3
                                        Failed <<<<
  
  Exiting Oracle Universal Installer, log for this session can be found at /u01/app/oracle/oraInventory/logs/installActions2012-01-04_05-22-08PM.log

  Here is the result of my/etc/redhat-relese

  [oracle@qtl1-251 Disk1]$ cat /etc/redhat-release 
  redhat-4
  #CentOS release 5.4 (Final)

  Thank you and best regards,
  Kahina Prasad.S

  You should read the release notes and try the recommended change or use the ignoreSysPrereqs parameter:
  http://download.Oracle.com/docs/CD/B19306_01/Relnotes.102/b15666/TOC.htm#CJAFHGHG

  Nicolas.

• Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to open any PDF... y at - it a patch?

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  "numetro" wrote in message News: * e-mail address is removed from the privacy * .com...

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  FAQ Adobe "Acrobat 7.0 and earlier versions do not support Windows Vista. Adobe does not plan to release updates to Acrobat 7.0 and earlier for Windows Vista compatibility. «You'll need to level of Acrobat 9 (or later) to ensure full compatibility with Vista and Win 7.»

• In FF 7.0.1 the new tab on the band on tabs disappeared after clicking on the icon of the tab group button and try to return, I'm looking for advice on how to get the new tab to reappear on the Strip to tabs.

  In Windows Vista, FF 7.0.1 I've selected the button tab group to try out it. However, when I chose the button group of tabs to close this point of view, the button tab in the strip of the tab no longer appears. I'm a request for assistance to restore the button new tab (the sign '+' on the subject) on the tabs to the right of the tabs open tape.

  You can find the button new tab showing as a '+' on the tab bar.

  You can open the window customize and drag the button new tab that indicates that a sign plus bar tabs on another toolbar and it will become a regular tools like the new button bar button tab you have in versions of Firefox 3.
  
  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  If you can not find the new button tab then click the button 'Restore Default Set' in the window customize.

  If you would like the button tab at the right end of the tab bar, then place a flexible space to the left of it.

• Windows Vista Business still don't not patched with SP1 via auto-mises to update or manual updates

  Our laptop Fujitsu is installed with Windows Vista Business. We have been used for about 1 year more, get the updates via automatic updates.

  I read that Vista has up to SP2. But check the details of the system shows that no service pack has been applied. So I trigger the update via IE-> tools-> Windows Update. He said that "no important updates available.

  I think that when you apply SP1, it will move from IE7 to IE8. So, we still have IE7.

  Why the service pack is not available for our case?

  Kind regards
  Ben

  A1. Yes.

  A2. You are 'safe' for now, as long as the computer kept fully patched to Windows Update otherwise. That being said, there will come a time in the not-too-distant that a computer without SP1 installed will not offer still updates all founded. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• i, m on windows vista 32-bit basic family and I m under IE 9. Windows Defender does not level

  i, m on windows vista 32-bit basic family and I m under IE 9. Windows Defender does not level

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon

• Windows Vista Home Premium 64-bit - cannot do group policy as disabled system restore, but have no way to activate Group Policy.

  Hi, I have Windows Home Premium 64-bit. I want to create a restore point, but I get a message saying that the system restore has been disabled by the administrator of the political group contact domain administrator. I am connected with an administrator account. I have read forums that give instructions to access the system restore options: file or tabs just do not appear and there are some comments saying that the option does not exist in my version. So how the hell do I create a system restore point in Vista Home Premium?

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/system-restore-was-turned-off-by-group-policy/bf10cf68-7da3-4222-a7ce-1ae827bf1845

  Quote:

  Using the Group Policy Editor
  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in, follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System Restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

  Words

  See also:

  http://www.guidingtech.com/870/system-restore-turned-off-group-policy-error-Windows/

• Windows Vista - Mail - group management

  When I delete a contact that is in a group, the group will no longer appear in the To: a new message when I right click on the group name and select Action > Send Mail. The only solution I've found is: delete the Group and recreate the entire group, one contact at a time. It is a very painful process. My 4 groups contains +/-50 contacts and that, since all contacts are members of our association of Senior golfers, destruction produce often - dead, move to Florida, could not Arthroplasty of the knee, Alzheimer's, etc. What can I do to eliminate it this problem?

  Hello

  Thanks for the reply.

  Rather than delete the contact from the group to remove the contact from here:

  1. Open Windows Contacts by clicking on the button start , clicking all programs, and then clicking Windows Contacts.

  2. Right-click the contact you want to delete and then click on remove.

  See this link for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-delete-contacts

  It will be useful.

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.