Patch update client tool from Dev2000...

Similar Questions

• Vista will not start after update 12/9 - a patch prevents the system from starting.

  My computer has downloaded an automatic update on 09/12/09.  It restarted while I was at work, and when I got home he had just ran a startup repair function which could not solve the problem.  I tried to run the rapair again and it failed.  I tried to do a system restore on the eve of the update, but the operating system could not start again, and I was sent automatically the Startup Repair tool.

  When I look at the diagnostics, the message says "a patch prevents the system from starting.  I have no idea how to solve this problem.  Can someone please?

  PCrepair101,
  You try to use the package manager I link a few post above?  Otherwise, demarrer start from your DVD, type command prompt, and then follow the steps in method 2.  http://support.Microsoft.com/kb/940410
  If this does not fix it you can rename the pending.xml file and restart.  To do this, boot from the DVD and enter the command line.  Then type:
  CD windows\winsxs - press on enter
  Ren pending.xml pending.old - press on enter

  Then restart the system.

  You said "when I try to do a system restore, it is said that there is no previous restore point" and I was wondering if you have tried a "Startup Repair" not a system restore.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• installation failed several times to KB2656353 and KB2656370 security update. I downloaded all the patches and recommended tools. What should I do?

  Received phone call from someone who identified himself as a member of the Technical Support of the Windows team.  Says my calculation had sent messages back saying that I had a virus.  Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus.  Noticed that Windows update was not the last 2 weeks so I tried to run the updates.  I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370.  I downloaded all the patches and recommended tools. What should I do?

  Have you tried the recommendations in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-install-update-kb2656353-i-am-receiving/f3c353ca-4d85-44e6-a5f0-eb9a5330d7c8

  and this article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-updates-continue-to-fail-with-codes-0x66a/5e05e18e-E2E5-400e-B114-75f155571b5c

• Update VMware Tools on specific servers

  Hello

  I developed the following script, using various sources, I found on the internet, which I run from the virtual Center Server to update VMware tools on a number of servers:

  ' $insParm = "/ s v" /qn REBOOT = ReallySuppress "'
  
  #------------------------------------------------------------------------------
  # Configure the variables
  #------------------------------------------------------------------------------
  Host name of the server #VM
  $VMServer = "06W8F5VC01".
  #User account to connect to the virtual infrastructure:
  $username = "root".
  
  #Directory path to the list of targets of VM.
  $updList = get-Content "C:\users\jmilano-adm\desktop\serverlist.txt".
  
  Write-Host "Serverlist: ' $updList
  write-host
  
  #------------------------------------------------------------------------------
  # Connect to the VM Server
  #------------------------------------------------------------------------------
  # $server = to connect-VIServer-Server $VMServer - User $username
  $server = to connect-VIServer-Server $VMServer
  #Search for specific VM in the production cluster:
  #$folder = get-file-name "Financial Hosts' #Target financial Hosts file in the VM Infrastructure Client console
  $cluster = get-Cluster-name 'MEL_Cluster_01 '.
  
  Write-Host "cluster Var: ' $cluster
  
  #------------------------------------------------------------------------------
  # Main()
  #------------------------------------------------------------------------------
  
  foreach ($uVM to $updList)
  
  {
  $vm = get-VM-name $uVM - location $cluster
  
  #$VM.name
  write-host "
  write-host "host to upgrade:" $VM.name
  
  #$uVM.UpgradeTools_Task ($insParm)
  UPDATE-TOOLS - VM $VM. Name - RunAsync - NoReboot
  
  write-host "
  write-host "host has been improved.
  
  #Wait 30 seconds before you start another task update
  Start-sleep - s 30
  }

  I tested the script and it works very well, but what I want to do is change it so that it performs the following:

  * Check this box when the line read from the ServerList.txt file is empty. If Yes, read the next line.

  * Check the virtual server to verify that the VMware Tools is indeed obsolete. If so, update.

  * Check if the server has no VMware tools. If it is not the case, install the latest version.

  To create a log file on the server on which the script is run.

  * Check if the installation was successful in fact. Add this information to the log file.

  Pls know me what changes I need to run the script to reflect the foregoing. Thank you

  Thinking about your questions. Here it is:

  
  #* Checks the virtual server to verify that the VMware Tools is indeed out of date. If so, update it. 
  
   foreach($vmItem in $vm) {
    if($vmItem.extensiondata.guest.toolsStatus -ne "toolsOK"){
     #Possibilities:
     # - toolsOk
     # - toolsOld
     # - toolsNotRunning
     # - toolsNotInstalled
  
     write-host "Vmware Tools is Not ok, upgrading...";
     UPDATE-TOOLS -VM $vmItem.Name -RunAsync -NoReboot
  
    }else{
     write-host "Vmware Tools Ok, no need to upgrade";
    }
  
   }
  #* Check if the server does not have VMware Tools. If it does not, install the latest version.
   I think the earlier script will work fine to this condition. Please tell, if not.
  
  #* Create a log file on the server which the script is being run.
   You can use the Measure-object cmdlet to see how long it took to run the script.
  
  #* Verifies if the installation actually succeeded. Add this information to the log file.
   After the Measuring, you can query again the Vmware Tools Status or create a looping to try more times till Vmware tools is readed as OK
  

• This patch updates apply to 11.2.0.1 to join 11.2.0.2?

  Hello
  
  Our client has Oracle 11.2.0.1 installed. We are trying to understand whether it is possible to apply some patchsets 11.2.0.1 to join 11.2.0.2? We understand that 11.2.0.2 is an entirely separate version and there are ways to put 11.2.0.1 in 11.2.0.2, but we wonder if we kept with applying all the set provided Oracle patch does mean that our database is not to 11.2.0.2?
  
  Or simply patch updates apply to 11.2.0.1 to join 11.2.0.2?
  
  Thank you
  RF

  968526 wrote:
  I understand that I can download and install 11.2.0.2 or above versions, but my question is more related to sets of patch which is published quarterly for each version. If I 11.2.0.1 and I apply all patch sets released for this version, I find myself with 11.2.0.2 version?

  Not to worry - to 11.2.0.2, you must apply the 11.2.0.2 patch set - there is no other way that I know.

  I also know that there is a way to put 11.2.0.1 in 11.2.0.2 following the steps for example here (http://www.mydbspace.com/?p=58), but I don't want to do that. Our client is to be filled by a 3rd party with a system that already has 11.2.0.1 and we cannot simply install another version of oracle. We are trying to understand if it is not possible to go from 11.2.0.1 to 11.2.0.2 by simply applying puts the patch for this version, then our customer may request the just 3rd party at 11.2.0.2 level or more.

  Upgrade to 11.2.0.2 (or 11.2.0.3 etc), you must follow the instructions of official update here - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm

  Hope that clarifies the issue.
  RF

  HTH
  Srini

• possible to install the client tools OBIEE and OBIEE server in the same machine

  Hello
  
  possible to install the client tools OBIEE and OBIEE server in the same machine.
  
  Ex:
  
  Last week I've updated Patch BP1 in my local system, in the process, we got the update also oracle Client tool
  
  But in my Administration tool in the built-in tool automatically updated, we need to install the client tool in my system?
  
  My doubt:
  Please check this screenshot
  http://ScrnSht.com/sskbjb
  Please help me,
  
  Thank you

  You should not install client tools because they will be automatically installed w install the server. The 11g installation guide says "do not install client tools on the same computers that host your server instances Oracle Business Intelligence, client tools are already installed on these computers (as part of the installation of Oracle Business Intelligence)."

  so useful, mark it as good or useful.

• Satellite P200-1EE: what to do with update Toshiba tools on site pilot

  I had to format my laptop last night due to a nasty virus.
  I reinstalled vista using the recovery cd and have installed all windows updates were available.

  What about updates that come from Toshiba? Are they downloaded as part of windows update or I have to download them separately on the Toshiba support pages?

  Also how do I know which is the more important?

  Hello

  The laptop works without problem after installing the recovery disk?
  If so, you n t need to update all the tools!

  Follow my suggestion; never change a running system!

• The Toshiba registry patch update and Toshiba disc creator issues

  I do not understand how the registry patch update, I downloaded and extracted the update, as requested in a temporary folder, but there is no setup install and I'm sure I didn't install anything, unless the system is installed itself without asking me. I want to know how this registry patch works and how it is installed.

  And the creator of disc has lost more than 15 DVDs with the same error code 380381-26-2A030C00. I don't know what to do about this, I tried microsoft solve this software and remove the upper and lower filters in the registry but still I can not burn CD

  Help me. Thank you.

  Hello

  I was a little confused m
  This Disc Creator patch do you mean?
  What cell phone do you have exactly?

  On the page of the European driver Toshiba, I have found a few patches as patch recovery.
  But it's registry Patch for the restoration of the system.
  After downloading the zip file, you should unpack this package, then you will find an exe file, this file must be decompressed also! Right-click on this file and select unpack here.
  Now, you should find a few other files and folders should be an install.exe

  However, in your case I would recommend testing another disc as DVD-R from different manufacturers as TDK
  I use DVD R and never had any problems with these discs

• System Update Readiness Tool Vista installation error - error: "the parameter is incorrect."

  I have a virtual machine running Vista. I need to update with the SP1 and SP2 for Vista and the VS SP1.

  I have downloaded and saved the 3, but when I tried to install SP1 for Vista I got an error that says I need to run the Vista system update tool. I downloaded the analysis tool, but when I tried to install it on the virtual machine is a mistake here:

  "The parameter is incorrect."

  There was no error number.

  [It is ironic to get an error during the installation of software that is supposed to fix the errors of installation...]

  What should I do now?

  Hi MeProgrammer,

  Temporarily disable the antivirus software on the computer as a test and try to install the update and check if this is useful to fix the problem.

  If disabling the antivirus software works, then you need to configure the same so that it does not disturb. Please contact the software vendor for assistance in this regard.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Additionally, make sure that you download and install the correct version (32-bit or 64-bit) system from the link below for Windows Vista Update Readiness Tool:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  In addition, I recommend you check the following logs for more information:

  %SystemRoot%\Logs\CBS\CheckSUR.log
  %SystemRoot%\Logs\CBS\CheckSUR.persist.log

  I hope this helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Update has disappeared from the BONE. __

  I am using windows 7 32 bit.
  Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
  Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
  Seems that windows update has disappeared from the BONE.

  Hello

  Welcome to the Microsoft answers community site. I suggest you try these options:

  Option 1: Make sure that Windows Update Service is running, or if a force start it takes

  1. open run it and type services.msc, and then press ENTER.

  2 locate the underside of services in all install services list.

  Windows Update (a)

  (b) BITS (Background Intelligent Transfer Service)

  (c) cryptographic Services

  3. check that the status is started. If the condition column is blank, right-click on the service and select start.

  4. always make sure that the Startup Type is set to automatic, and then restart the computer.

  Option 2: How to reset the Windows Update components?

  Run the Microsoft Fixit tool to reset Windows Component Update.

  http://support.Microsoft.com/kb/971058

  See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Option 3: search for viruses and malware

  (A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

  Or use Microsoft Security Essentials - free

  http://www.Microsoft.com/Security_Essentials/

  (B) check for the shape of software malware malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.mspx

  Or

  Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Update client computers (without pain?)

  I am in a small office with 21 workstations and a server running Windows Server 2003.  Believe it or not, we have no computer.  Is it possible via the server update client computers with windows updates automatically, and can you point me to information source on how do?  Thank you

  http://TechNet.Microsoft.com/en-us/library/cc720481 (v = ws.10) .aspx

  In the future, you would be probably better off from here...

  http://TechNet.Microsoft.com/en-us/WindowsServer/ff354964

  ... rather than in this forum.

  Tricky

• Update the Bios from f29 to f2b?

  Can someone tell me if the update of Bios f.2bs will actually be an improvement over my current bios F.29?

  With the exception of the occasional router connection overnight downturn, (usually after 12 or so when everything seems to hang, but this does not happen if I use a cable network however), everything is fine.

  This update was suggested my HP support assistant. I checked the page to update the driver from the Hp website for my model (dv6-7000 quad, win7 64 bit) and it appears an old bios f.0Une update.

  Please provide improvements that never I don't see if I choose to upgrade.

  Thank you

  Hello

  Please go through this thread and read the advice given by HP Expert (Dragon-fur) on updating the BIOS: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/bios-update/m-p/4102072

  I think take made House are:

  DO NOT UPDATE BIOS/FIRMWARE OF YOUR SYSTEM UNLESS IT IS NECESSARY TO CORRECT A DEFECTIVE/DISABLE-FUNCTIONING SYSTEM COMPONENTS

  DO NOT UPDATE BIOS/FIRMWARE JUST BECAUSE THE LATEST VERSION IS COMER & THIS WILL BE COOL TO HAVE

  ONLY UPDATE BIOS/FIRMWARE FROM THE SITE OF YOUR PRODUCT (NOT HPSA), TOO IF YOUR SYSTEM IS IN GREAT NEED OF HIM.

  I have no idea why updates, you referred has been deleted. HPSA is too bug eventhough it of a great tool for your computer, so be careful, you do everything related to him or her.

  Update my other updates to my product site as soon as it is available. I don't want to make a mess of everything in the end.

  Hope your problem is solved. I'm happy that I could help you.

  Thank you

• Computer asks me if I want to run Microsoft Windows remove tool from malware at c:\windows\system32\mrt.exe/R/RE

  Original title: rmt.exe file

  Windows always autometic update my computer when I turn on my computer. Today, something new happened to me. When I started my computer, the system asked me if I want to run 'Software removal tool Microsoft windows maliciay' to 'c:\windows\system32\mrt.exe/R/RE '. I did not know if run because I'm not sure whether Microsoft or not. I checked this directory on my computer, and I have this file mrt.exe 54353kb with the current date. also a mrt.ini file.

  It is a microsoft file that I can run safely, or it is a virus file that could damage my computer?  Help, please. Thank you!

  Hello

  Microsoft has released a removal tool from Microsoft Windows to help remove software malicious common specific malware on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP.

  You can see the article for more information about Microsoft Windows Malicious Software Removal Tool.

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP

  http://support.Microsoft.com/kb/890830

• Failing to download the system update readiness tool

  Separated from this thread.

  Hi, I tried to download the system update readiness tool, but happens to end with

  Gateway Timeout

  The proxy server has not received a quick response from the upstream server.

  Reference #1.a7643e17.1459430176.e41259

  or similar on both the 64-bit Windows 7 machine that I am trying hard and machine controlled work Windows 8 that certainly shouldn't be malicious software.

  Best regards, Michael.

  Thanks Gerry, I went through a couple more cycles of running the tool for troubleshooting Windows Update and reboot.  Ithen left to 'check updates' during the night and in the morning he had downloaded and installed the missing updates.  I don't know if there was a more general problem with Microsoft's servers yesterday or if it's just that I was too impatient for something to happen, but I'm now safely on Windows 10.  Thanks for your interest.  Best regards, Michael.

• Request concerning the sequence of updates for the Windows Update client in 2015

  I posted a query similar to this on a Microsoft Technet forum, but I have not yet received a response to the specific question that I asked.  I'm trying so this forum.

  I am running Windows 7 Home Premium SP1, but I did not intend to accept the free update of Windows 10.  I don't use automatic updates.  I use Windows Update manually and select the updates to install, even for these updates identified as Important.

  Since April 2015, there was a sequence of updates for the client Windows Update on Windows 7 (Windows 8).  I have the Windows 7 of those below list:

  KB2990214 (April 2015)

  KB3050265 (June 2015)

  KB3065987 (July 2015)

  KB3075851 (August 2015)

  KB3083324 (September 2015)

  KB3083710 (October 2015)

  KB3102810 (November 2015)

  KB3112343 (December 2015)

  (This list is probably less intimidating than it looks because the replaced October update Update September, which replaced the August update, which replaced the July update, which replaced the June updated.  "There are therefore basically just 4 updates.)

  The big question is, given that Windows 7 is available for several years, why, all of a sudden, there was this sequence of updates for the Windows Update client?  Because these updates began to occur at the time when the offer of a free upgrade to Windows 10 was announced, I could be forgiven for thinking that all of these updates are really directed towards the relaxation of the upgrade to Windows 10 via Windows Update, and that there is little or no advantage to systems that are not upgrading.  I am mistaken in this belief?  If not, precisely those who will benefit from my system, even if it is not upgraded to Windows 10?

  The updates that I currently installed, depending on the installed updates, are KB2990214 (April 2015), KB3075851 (August 2015), KB3083324 (September 2015) and KB3083710 (October 2015).

  In my view, there was a lack of transparency in the descriptions of these updates in the KB articles.  And, in one or two cases, information on the importance of an update in the article and in Windows Update has been inconsistent.  It would have been much clearer if each KB article stated for NOT upgrading to Windows 10 systems, if the update to the Windows Update client is important, as an option or completely irrelevant.

  Hello, Tiberius.

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time and your concern.

  You can read this article and check if it helps.
  Next update to Microsoft Update Client
  http://blogs.technet.com/b/Mu/archive/2014/06/24/upcoming-update-for-Windows-Update-client.aspx

  Please keep us informed.

  Thank you