patching and upgrading stream

Similar Questions

• Difference between patches and upgrades in vCenter Server 4?

  We improve just vCenter for version 4.  The ESX hosts are still running ESX 3.5 U5.

  When we run the Update Manager, we see that there are two checkboxes - Patches and upgrade.  We assume that the patch is host and upgrade to ESX 3.5 to ESX 3.5 to vSphere 4.  Is this correct?

  When we run Manager update with the two boxes checked, it appears the fixes that we must apply for these ESX 3.5 hosts.  However, there is no upgrade poster for us to upgrade to vSphere ESX 3.5 U5.  Are there any suggestions?

  Thank you

  Hi Tony,.

  Box upgrade is when you want to scan your host for upgrade compliance - for example if it is 3.5 and want to upgrade to 4.0

  Patches box is related to 3.5 and 4.0 host but only for cumulative patches, updates and individual patches.  That's the main difference - change the host of 3.5 to 4.0 version is done by upgrade and spend 3.5 U1 with U2's patch.

  If you want to check what patches you need - create base patch dynamic host. Upgrade, you must download iso 4.0 upgrade of host based and clean up with her

  HFH,

  Petko

• VUM 5.5 Service crashes when manually by selecting 'download patches and upgrades.

  Hey all,.

  I have problems with a new installation of vCenter 5.5. This is on a Dell PowerEdge 2950 with 8 GB of RAM. I am running SQL2012 Express as a main server on the same server. It is a new installation of Windows Server 2012 Standard.

  This is the 2nd time that I was able to reproduce this problem. I first thought I screwed something with the installation and so I reformatted the box and started again. Fresh installation of SSO 5.5, 5.5, 5.5 VUM vCenter. Downloading the initial patch was successful. Each attempt later patch gets to 50% in the vSphere client and service crashes. This causes the plugin to fail in the client vSphere as shown below. This also happens if I do some tasks in the update via the web client Manager. If I cancel the download and restart the service, it continues to run flawlessly. I can attach the baselines initially patches and custom data center planning / hosts and scan / patch without problem. I don't know where to begin the search on it and I know there are several log files. I have 2 other environments where I did 1 new installation and 1 upgrade and do not have this problem. I have the same software installed on the server in question that I made on the machine, I upgraded. I can assume there is a bug / driver / OS level issue going on here. Has anyone experience this problem? It seems that I have had problems with 5.5 to date. Any help would be appreciated.

  

  I found the answer after having waded through the difficult to read newspapers VUM. I got the SQL Native client 11.0 for the ODBC source instead of the 10.0. Here, the article describes the problem:

  VMware KB: VMware vSphere Update Manager 5.x fails to start when you use SQL Server 2012

  Dangers when using purely by default without knowing some of the small nuance hope this help anyone who may run into this problem with a fresh Server / vCenter install.

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Flip player and upgrade to el capitan conversion is more correctly.

  After my upgrade to El Capitan 10.11.3, my player Flip version 3.3.7.3 disappeared from my system preferences page and no record WMA I try to open is converted by QuickTime. I am extremely ignorant of patches and troubleshooting except on the basic levels. How to get things the way they were before the upgrade? I've updated my Flip player to the latest version but don't know what to do with it at this point.

  In my opinion, you need to reinstall Flip4Mac. See... http://www.Telestream.NET/Telestream-support/Flip4Mac-WMV/FAQ.htm

• Updates of patches and downloads for windows xp that took place after the release of sp3

  Is there or will there be any type of packs of update that I can incorporate into my windows xp pro sp3 install cd using nlite [or not] would make it easier to keep my system up to date when I Custom installed my system?

  I know that there is a very explicit "' response to sp4. I'm looking for the next great thing.

  It's one pain in the end have to install windows, then all the .net stuff, light silver, patches and other from windows update, and slipstream, and then in an installation using nlite, so I can have it later when I re-install the operating system.

  I think microsofts plan works however. I think to upgrade my xp system to vista sp2.

  Thanks to a witness of anomaly.

  Hello

  Unfortunately, there is no Pack update that you can install to keep your computer up to date. The only option is to download and install up-to-date or patches updates manually
  After Service pack 3 because there will be no more service pack for XP.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Consoldated patches before upgrade of the command.

  , I want to upgrade to R12.2.4. I just installed R12.2.0 startCD 49 and I use Doc ID: Oracle E-Business Suite Release 12.2: consolidated list of patches and bugfixes of technology (Doc ID 1594274.1).

  These are all the patches that my database gives me to install.

  14046443

  14255128

  14367567

  15955538

  16075609

  16288550

  16299727

  16359751

  16989137

  17250794

  17401353

  17654622

  17901041

  17912217

  18244962

  18260550

  18282562

  18331812

  18331850

  18419770

  18436307

  18440047

  18607546

  18614015

  18674024

  18685209

  18689530

  18730542

  18828868

  18893947

  18964939

  18966843

  19393542

  19472320

  19487147

  19791273

  19835133

  19896336

  19879144

  19949371

  20245930

  20294666

  20476776

  20825533

  20949558

  There is no startCD 49 on this document and I tried 4 times to install these patches, but it seems that they must be installed in a special way. Can someone help me in order that should be patched back, rolled, etc.. Thanks in advance.

  2908802 wrote:

  Hey . Bashar, I mainly do apps dba work and basic work s/n, glancing if 11.2.0.3.15 I thought it was incorrect, can you explain to me how its ok to apply to the database and why 11.2.0.3 SPU would not work?

  Thanks for the help?

  If you want to stick with 11.2.0.3 (not recommended), and then apply the power supply, I mentioned (11.2.0.3.15).

  Then apply the patches of the superposition of the document I quoted above.

  Database Patch Update Set overlay patches required for use with blocks of power and Oracle E-Business Suite (Doc ID 1147107.1)

  Kind regards

  Bashar

• R12.1.1 EBS installation and upgrade to R12.1.3

  Dear Experts,

  I'm already installed Oracle E-business R12.1.1 (new installation without patch update after installation is complete).

  However, now I will install a new VM on Oracle Linux 5.4 then level to R12.1.3.

  I'm looking in and read too many articles in the Oracle support on how to install 12.1.1 and upgrade to R12.1.3, I found too many documents and patches.

  My question, is there any document makes instruct me to install requisit-pre and post requisit for installation and the upgrade?

  and also, mention the fix required for displays and upgrade?

  Your support is highly appreciated.

  Ahmad,

  
  

  Ahmad,

  The patch in (Doc ID 1066312.1) is already included in 12.1.3, so you should only follow (Doc ID 1080973.1)

  Thank you

  Hussein

• At the old version of adobe reader and upgrade inadvertently WAA CD player. realized that I could change is no longer with this and tried to uninstall and reinstall and older versiono, but could not. Tried to reinstall the domain controller new version an

  At the old version of adobe reader and upgrade inadvertently WAA CD player. realized that I could change is no longer with this and tried to uninstall and reinstall and older versiono, but could not. Tried to reinstall the domain controller new version and it would not, indicating that the newer Version is already installed. Nothing in programs and features.

  Looks like a job for the cleaning tool: Download Adobe Reader and Acrobat tool - Adobe Labs.

  If you prefer XI player, make sure that "Install updates automatically" is not enabled under Edit > Preferences > Updater. It is possible to download and apply patches manually.

• Download the patches and the stage manually in the Update Manager?

  I need to perform an orchestrated to ESXi upgrade using Update Manager, however, my server vcenter and client computer for Update Manager are on isolated network segments that are not allowed on the internet. How can I download the patches and their step manually in the Update Manager? That is to say, I want to download the patches from a computer that has internet connectivity and then upload to Update Manager.

  Please help!

  Thank you very much.

  You can use the Update Manager download service to download your updates and copy at VUM in isolate network,

  Following the documentation and the Ko with description for this case:

  DOC:

  VMware vSphere 5.1

  Ko

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004455

  Kind regards

  Joao castro

• Cross platform migration and upgrade to R12

  Hello

  We need to migrate the Oracle EBS database that runs on 11i to R12 on Exadata. Please guide us properly.

  Source:

  31 +.

  Level DB: Windows 2008 Server

  Apps level: physical Machine in the Windows Server 2008.

  Target:

  Install EBS R12 on Exadata.

  Level DB: Linux on Exadata

  Level Apps: Windows 2008 server VM on Microsoft (active/passive) cluster.

  Thank you.

  Please see the following links/docs.

  Migrating from a server Oracle eBusiness following Oracle Exadata Database Machine [ID 1133355.1]

  Oracle E-Business Suite Release 11i & R12 patches required with Oracle Database 11g Release 2 (11.2.0).) on Exadata [ID 1392527.1]

  Guidelines for preparation of database for an upgrade of version 12.1 E-Business Suite [ID 761570.1]

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]

  Process of 12.0 and 12.1 using 11 GR 1 material or 11 GR 2 import/export [741818.1 ID]

  Oracle E-Business Suite Guide version 11i 12.1 upgrade

  http://docs.Oracle.com/CD/E18727_01/doc.121/e16342/TOC.htm

  Thank you

  Hussein

• Patch and worker issues

  Hello
  
  Here are some questions patch and hardworking... Please let me know how to diagnose all the problems of this...
  
  When a patch changes the custom such as RDF files files... How to solve it?
  
  If I want a lower version of the file in a patch to copy to an already superior version of the file present in apps how to on this subject... .can manually copy us or any other utility is there to do?
  
  If a patch change custom top How to solve...
  
  If a fix is underway long enforcement say more than 3 hours and there is no error in the log file and also the status of worker run also in this case what may be the issue?
  
  can we leave a worker in a patch and also can we put an end to a work process and then restart?
  
  
  Thank you!!
  Vandenkoornhuyse
  Oracle apps dba

  Salvation;

  What is your EBS? I guess you have R11 coz did you post on part associated R11 forum.

  Here are some questions patch and hardworking... Please let me know how to diagnose all the problems of this...

  Use adctrl utulity (log in as applmgr, source env and type adctrl break)

  When a patch changes the custom such as RDF files files... How to solve it?

  If I want a lower version of the file in a patch to copy to an already superior version of the file present in apps how to on this subject... .can manually copy us or any other utility is there to do?

  If a patch change custom top How to solve...

  If a fix is underway long enforcement say more than 3 hours and there is no error in the log file and also the status of worker run also in this case what may be the issue?

  can we leave a worker in a patch and also can we put an end to a work process and then restart?

  For all your question check below notes:

  Oracle Applications patch FAQ for version 11i [ID 457566.1]
  Oracle Applications patch FAQ [ID 174436.1]
  Install/Upgrade/patch FAQ [ID 214994.1]
  Version 11i Adpatch Basics [ID 181665.1]

  Respect of
  HELIOS

• patch to upgrade to 10g from 10.1.2.0.2 to 10.1.2.1

  Hi all
  
  I'm going to 10 g AS integration with 11.5.10.2.
  here according to the documentation I have seen that this 10 g, AS it has upgraded
  
  My 10g version is 10.1.2.0.2
  
  The below msg is in accordance with the Oracle Documentation
  -----------------------------------------------------------------------------------------------------------------------------------------------------------
  If you use Oracle Application Server 10 g Release 2 (10.1.2.0.0) or Oracle Application Server 10 g Release 2 (10.1.2.0.1) Standard Edition One, then apply the Oracle Application Server 10.1.2.1 patch before applying Oracle Application Server Portal Upgrade.
  ---------------------------------------------------------------------------------------------------------------------------------------------------------
  I searched a lot in metalink for the patch, but no luck
  
  So please let me know the good patch to upgrade my 10g from 10.1.2.0.2 to 10.1.2.1
  
  Also any supporting documents for this upgrade
  
  Thanks in advance
  
  Kind regards
  Bhanu Chander.

  go to, patches > Quick links to: latest Patchsets, Mini Packs and Maintenance Packs > Fussion MiddleWare > your OS > 10.1.2.2 or 10.1.2.3, you do not need to 10.1.2.1, if you have a larger version, it should work.

  The installation program reviews to the same version or higher.

  Greetings.

• to upgrade my iMac yosemite Sierra do I need save iWork applications first and upgrade etc.?

  To upgrade my iMac Yosemite Sierra can I first of all backup and upgrade the iWork etc. applications. ?

  He can't make a backup.  You don't need to do anything else.

• I use 5s iPhone and upgrade to iOS 9.3.1 but he can't get all the features...

  I use 5s iPhone and upgrade to iOS 9.3.1 but he can't get all the features...

  What features Miss do you?