Path of the application on the device

Similar Questions

• Sansa e280: multiple paths to the devices during the synchronization and no MUSIC file

  Feature: Sandisk Sansa e280 8G

  version: 01.02.24A

  I had a problem with my e280. A month ago, I started getting an error message during playback of my music files. The error says "Syncronize to continue music subscription" I have synced to my computer, nothing helps. Soon ALL my music files were giving me this error message. I went on the Sansa website, where I was directed to download and run the device Sansa Recovery Console. I did as instructed, and now when I join my e280, I get TWO paths of devices (E: / and F: /). I am only able to access one of them (E: /). F: / is noted as removable drive and not going anywhere. When I enter in E: / I can not find my music files. When I remove my camera, he did a restart of automatic system, as soon as the restart was successful, it updates the database for about 10 minutes. I synced the device and my computer prompted me to format the device. I formatted and I still no MUSIC file. The device has been wiped and I thought it would be best to seek professional help until I made the situation worse.

  If there is any other information needed to tell me what it is and, in the worst case scenario, how to find and I'll post it as soon as POSSIBLE. I know it's a lot of problems for a single device, but any help at all would be greatly appreciated!

  Thank you for your time,

  Dibbz

  Unless you are dealing with the Rhapsody subscription service, the error message "sync" is probably due to problems, DRM , Windows Media Player created without your knowledge. It is turned on by default in WMP, & unless you know about it from the start, you can do it yourself untold headaches.

  If you are ripping from CD to the .wma format, uncheck the option 'Copy protect' in the rip settings tab. It's the guy causing the problem. If you do not rip your own CD and downloading these songs instead, they have a DRM encryption. Try a different and/or source format. MP3 files don't have any crippling DRM.

  You must delete the files on the drive and start over with new, best non - DRM. If RIP you to .mp3 format, it won't be a problem, more there are other benefits on the Microsoft/WMP .wma format.

  When connected in MSC mode, your computer will detect your drive as just another flash storage device; actually 2 separate devices. 1 will be your drive (internal memory). In your case, E:. F: received the external memory card slot, if there is a card in it or not. If you have no card in the slot, that's why he 'not going anywhere '. Perfectly natural and nothing bad here.

  The MUSIC folder (and others) are hidden by default. You have to display .

  Formatting will erase all content, so this is only necessary performed as a last resort. It's a PITA to re - load it all so that you do not want to unless it is absolutely necessary. But now that yours is formatted, you can start over w/o of the DRM BS and your problems should go away.

• The application icon displays only not on the device

  
  

  Are you build the application that you are testing your device using Ant? If so, perhaps you have wrong path in the icon property.

  The value of your icon must be a relative path based on your destdir.

• I received an error message on my iPad: the application has lost the device context when I try to open the Jam Cookie

  If someone got the error message: "the application has lost the device context? This appeared on my iPad on the application of jam cookie there is a thin red strip across a black screen with the error message locked in the red band. Help!

  Reset the iPad.  Press and hold the power and home together for 10 seconds until the Apple logo appears.

• test the application on the device displays only a black screen.

  Hello
  I've created Hello world app, app works fine on the Simulator.
  But when I install this application on the device and the launch of devie it shows only a black screen. I'm not sure what is the reason for this.
  Device that I use is Intex clouds fx.
  Everything here in the face of this problem?

  Thank you

  Hi @bhuvan
  I solved this problem by adding this css on my html page.
  HTML, body {}

   background: white;
  

  }

  For some strange reason, app is running but watch entirely black screen.
  Jan Jongboom has helped me to fix this problem, I asked this question on stackoverflow so... Here is the link to this question.

  http://StackOverflow.com/questions/25831952/Firefox-OS-Hello-world-app-works-fine-on-Simulator-but-displays-black-screen-mob

  Hope that this tip will solve your problem as well

• Hello, I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices. Thank all participants in advance of the availability, I offer cordi

  Hello

  I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices.

  Thank all participants in advance of the availability, I offer cordial greetings.

  Post edited by: andreava

  No preference, but there is a solution. See moving backup iOS device. See the rest of the tip of the user to do a split cell library if the library files and the media folder are on different drives.

  TT2

• How to remove an application from a device with the Profile Manager?

  I use iOS devices 9.1 in collaboration with Apple Configurator 2.1 and 5.0.15 Profile Manager. Configurator locks iPads and the Profile Manager is used for the distribution of applications. We are assigning apps in device that is a great feature. However, when I delete an application from a device with the Profile Manager, the application does not remove himself. The Profile Manager back the license and I can redistribute app for iPad one another even if the application is still installed and usable on the iPad first.

  Is this a bug? It seems that it should remove the app. If I delete the management profile in distance from the unit, it removes apps.

  Click on the gear box and then delete Apps and select the application you want to remove.

  Initially, I did what you did probably has been to select the name of the application, then press the 'less', who pulled out of the app in the list, but it has not removed the iPad, he just removed their license.  Through the gearbox and to remove it it removes of the iPad.

  You may have already thought of it, but I found this post unanswered after two months, and once I found the answer, I thought I'd put it here.

• Installed application behaves differently by the path of the file

  Hi all! I have a problem regarding my application installed on another pc from "My Installer", that I have built my original labview project.

  I wanted to set up a file open/create operation, get the path of the current file of my vi, create the new folder 'report' and the new report file, whose name is composed of the date and time when it is created. With 'Get string date/time', I got the date as '25/05/2015' string and time string like '14:24:20 ', and 'find and replace the string' I have them is converted into '25052015' and "142420" everything simply by replacing "/"and":" with nothing.

  It works fine with the original vi in my pc, but with the application installed on another pc, I got error in the path, that instead of 'C:\...\report\transducer_25052015_142420.txt', I got "C:\...\report\transducer_25052015_14.24.20.txt"!  The colomns are replaced by dots!

  I have no idea why my installed application would give such error. Someone has an idea?

  PS. I tested on the difference between 'Run application path of time' and the file path by default, you can see on the image below.

  

  You can provide a format if you use the Format Date/time string.  You don't need to replace the then you do not have to worry about getting to be in the way in which the system settings.

  

• How to get the path of the 64-bit application?

  I worked with the builtin function to get the system directory on a 64-bit computer that is running Windows 7 and noticed that the selection of path of Application file always returns the path to the directory for 32-bit programs (for example, c:\Program Files (x 86)).

  Firstly, is it because I'm running 32-bit LV or am I missing something.

  Secondly, if I wanted the 64-bit program directory, is it safe to cut just the part '(x 86) '. I've never seen a system where it is would not have worked, but kinowing Windows that there could be a strange setup where it would break.

  Mike...

  It seems to be a problem with the emulation of what I quickly read online about this.  However, you can get this information from the registry.

  The location in the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  You are interested in the string value:

  ProgramFilesDir

• The path of the environment is too long, please reduce the length. Click on 'Retry' after reduction of the duration or click 'Cancel' to exit the application.

  The path of the environment is too long, please reduce the length. Click on 'Retry' after reduction of the duration or click 'Cancel' to exit the application.

  https://SkyDrive.live.com/redir.aspx?CID=aff9e35a44d9e5da&RESID=AFF9E35A44D9E5DA! 171 & Thierry = AFF9E35A44D9E5DA! 170

  http://en.Wikipedia.org/wiki/Environment_variable#System_path_variables

• generation of application cRIO ask for the path to the file

  Hello

  to create an application for the cRIO startup, I have an error in the constructor. Every time he asks me to build the path of a vi. But the path of the Subvi is already known by the project.

  How to remove the error?

  Wilbur

  

  PS: in the snapshot the right path of the vi indicated, but every time I need to select manually by using the "Browse..." button ».

  problem solved:

  http://forums.NI.com/NI/board/message?board.ID=170&thread.ID=499424

• Get the path to the Application

  Dear all,

  In my application, I want to save a file where the Application is installed.

  How to get the path of the Application?

  Thank you

  Ritesh

  Use the current VI of the path in your main VI. Please read this document.

• The application's command line arguments get the path to the file in windows Explorer

  Hello

  I am trying to open a file with my labview application .exe, so I thought that windows was sending the file path double clicked in Explorer solutions in the form of argument, but all I get is the name of my exe file.

  

  Does anyone know how to set up windows or the application to get the double click path from the Explorer, which has the file extension has already been associated with my exe?

  Thank you!

  I'm not sure I understand, but I think you want your Labview program to open another file, as a file of perimeter?

  Have three basic choices.

  Hardcode the path with file name in your program http://zone.ni.com/reference/en-XX/help/371361K-01/glang/path_constant/

  Use the file open vi and for the user to select the file to open http://zone.ni.com/reference/en-XX/help/371361J-01/glang/file_dialog/

  Write your program to accept a http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364 command line argument

• Blurry text in the device as well as some other applications Manager.

  My system is an Alienware 15 R2 with graphics of 970 m.

  Initially, I was using the "display driver uninstaller" tool for cleaning re instillation of nvidea drivers because I had some display problems with older games. (Now I know that the program was not necessary)

  Then the display of all my programs are vague and very difficult to read. I tried another reinstall by using the display driver uninstall, but it crashed when rebooting in safe mode.

  Windows 10 required a soft & after instillation who did I had the same problems of blurred text.

  Technical support advised me to change the DPI scale

  www.tenforums.com/.../5990-DPI-scaling-level-displays-change-Windows-10-a.html

  & to change the plain text display

  www.tenforums.com/.../5990-DPI-scaling-level-displays-change-Windows-10-a.html

  It didn't work, but the strange thing is that a windows update fixed the problems for some programs, but not all. Steam & Google display correctly but Revit, Auto Cad & for some strange reason, my device manager are blurred.

  Here are a few screenshots to help diagnose the problem

  

  Tech support recommended 10 to win an ANOTHER re instillation, but I don't see how this could help.

  All of the Suggestions.

  Tesla1856

  Iczel

  Hi - I recently got my XPS13 version QHD (9350). The first thing I noticed that was blurry Device Manager as OP. Some windows are also very small. I need almost a magnifying glass to read. Y at - it any resolution to this?

  Of course, the appropriate display drivers must be installed correctly.

  In the Control Panel, set the display resolution to the (full) native resolution of the display panel. Who takes care of the "fuzzy". Always leave it like that.

  To provide superior, do you it in a different place. You can adjust the scale to the top of 100%.

  Oh, go ahead. Read the messages the wire, this is not a driver problem, making the scale or resolution. The blur is due to legacy applications not scaling properly, that's why the Device Manager seems to blur, but not the modern control panel interfaces (metro).

• Problem blackBerry Contacts application launch Smartphones and tasks after update of the device on the air.

  Hello

  I have problem launching Contacts and applications Taksks on my BB Bold 9900 after OS updated on-air 7.1 Bundle 2508 (v7.1.0.912, platform 5.1.0.641).

  The Contacts app is crash after trying to launch it's and not display anything (previous armored content is displayed). I have to press to close the application and return to the screen notrmal.

  The tasks app isn't launched and display error message: Eception exception: context of entry has a component of input null - apparentely focusGained has not been called by UiEngine.

  It's not disappear, even I reboot the device, remove the battery or wipe it.

  Can someone help me?

  Kind regards
  Artyom.

  HM, if I try to start tasks app with English as the language of current entry - this app has started without problem. Current developments in Russian language - prevent to start this application. Also if I delete files from Russian support of device using desktop - contacts and tasks soft application works ok without problem. May there are Russian software bug in support files.