test the application on the device displays only a black screen.

Similar Questions

• Satellite L300 PSLB8A display, only a black screen

  Hi guys

  Please help if you can; This morning I turned on my laptop (Satellite L300 PSLB8A-04R004 running Vista family) and all I get is a black screen.

  I tried removing the battery and turn on while plaugged in the power supply, same black screen.

  I tried to remove the battery then replace after 10 minutes, but the same black screen. All the power lights are on (but non-corps House).

  I tried everything suggested in support on the site page, but thought that you guys might have the answer?

  Thank you.

  > I have tried everything proposed in the support on the site page, but thought that you guys might have the answer?
  Seems that you have already tried a workaround solution that I would recommend.
  Disconnect the power adapter, remove the battery, wait 1 hour or more.
  Reconnect the two parts and then try to switch on the appliance.

  If that does not help, then you might try to start the device using a single module of RAM.
  Maybe it's a question of s a RAM...

  Otherwise it s necessary to test the material parts and run diagnostic checks.
  This can be done by a Toshiba ASP.

• Premiere Pro CC - program monitor displays only a black screen

  Hi all

  I hope there, can someone help me (and I'm sure many others) with this problem.

  I used the first Pro CS6 and was at Midway through a project when I upgraded to first Pro CC. It was very good and I finished the project, however shortly after this when I re-entered Premiere Pro CC to make some final adjustments and settings, the program monitor seems to be black. I see nothing but black on the monitor of the program window. When I play the project, the sound works fine, but I don't see anything in the program monitor.

  Please see the discussion linked here (http://forums.adobe.com/message/5487954) for more information on this issue. I'm hoping to turn the heat on it and get answers for everyone having this problem. She made my first Pro useless right now. I can't yet start new projects because it has the same problem.

  NOTE: I tried to roll back the CS6, but it does not work and I discovered this forum that roll back versions has never been possible. I also tried to reinstall CC PP but that does not solve the problem.

  I hope someone can help here.

  Thank you!

  I hope never auto-updates for nothing! I went to Nvidia.com and found a driver for your 5200M last month, try this - http://www.nvidia.com/object/quadro-notebook-win8-win7-64bit-320.49-whql-driver.html

  Thank you

  Jeff

• I managed to install simultor but that I only see black screen

  I see not all contain on the Simulator

  only see black screen, what is setting for it

  now I am able to see the display screen

  After logo Blackberry now I am able to see the screen

• I downloaded the trial of the creative cloud vision. But why does the application display a completely black screen?

  I downloaded the trial of the creative cloud vision. But why does the application display a completely black screen?

  I can open the CC but I don't see anything in it.

  I downloaded and months before photoshop. I still see something at the window right there.

  But now, I see the dark window. So I couldn't download the Adobe Illustrator.

  Please help.

  Hello

  Please see the thread below where this issue was discussed:

  Re: screen creative black cloud

  Kind regards

  Sheena

• How do I test an application on multiple devices?

  How do I test an application on multiple devices?

  Any information on this?

  Once I created the .ipa file I have to do?

  Creating the API you could use a configuration profile. If it's a development of a distribution one ad hoc, you choose what devices the IPA is allowed to work on.

  So, to make an ad hoc distribution profile that includes all devices on your iPhone Developer account and make the API using this profile. Now, when you did the IPA, you can give it to the people who own these devices.

  If they are all your own devices (or the people that you see every day) you could connect each of them to your Mac and use Xcode window Organizer or peripheral (according to the version of Xcode you are using), and then drag the IPA in the list of Applications for the device.

  If the devices are owned by other people that you do not get to see, you can either send the IPA to them and that they would use iTunes to get it on their device, or if you can put the IPA online you can send a link to them, and they can install the IPA directly from the web page.

  The web server will need to be HTTPS, you cannot use HTTP services from iOS 7.1 is released. To post the IPA online, you can use this utility:

  Mac App Store - BetaBuilder for iOS Apps

• When you watch the steaming video, I get the sound but only a green screen Uni.

  * Original title: video

  When you watch the steaming video, I get the sound but only a green screen Uni.

  Moved from the center of Community Participation.

  Hello

  As you don't give any information about your computer operating system or software, all I could suggest is to install a codec Pack.

  http://www.SnapFiles.com/get/k-Lite-full.html

  Follow this information here too:

  "FYI: . During our review, we found that this program offers to install promotional, third party components. Installation of these components is optional, but you should pay attention when installing'

  See you soon.

• I downloaded the application, and all I get is a black screen. It will not start. What's wrong?

  I downloaded the application, and all I get is a black screen. It will not start what is wrong?

  Sign-in black screen | Creative cloud desktop application

• How you can know if you want to compare materials is the problem between the processor and the memory when you have black screen!

  Hello

  If you have a black screen which can be if the processor is dead or memory is dead how you know if you do not reserve memory, the problem is the processor or memory?

  I tried this on my computer, I put on the CPU and I got black screen, I put in memory and I got black screen.

  Thank you

  Johan

  Thank you

  so in this case, how you can know if it is the processor or memory is the problem.

  you have to always have book of memory by you to resolve these issues (to make sure if the memory is problem) what memory or processor its work not at all.

  or it is too nested ways!

  Johan

  From what you described, it is possible that the processor, the RAM and the motherboard are all damaged. Or also the cold of power supply the problem (which could be checked for appropriate using a voltmeter). If you do not reply the existing motherboard then without spare parts (RAM, processor and motherboard) to use in tests, there is nothing more you can do with it to test these components.

• Hi, I installed the creative cloud, but when I download Lightroom CC, the browser indicates that the program is downloaded, creative cloud appears, but overall the program is just a black screen, I do not see what I am downloading or the status of downlo

  Hi, I installed the creative cloud, but when I download Lightroom CC, the browser indicates that the program is downloaded, creative cloud appears but overall the program is just a black screen, I do not see what I am downloading or the status of the download, I use a pc

  You must install Ligjhtroom cc app to app Adobe Creative Cloud.

  See the link below:

  https://helpx.Adobe.com/creative-cloud/KB/black-screen-sign-in-creative-cloud.html

• Dear Sir, I am unable to see you tube to firefox browser. hearing is only audio. black screen appears. I can see it on other browsers. Please notify.

  Dear Sir, I am unable to see you tube to Firefox browser. hearing is only audio. black screen is displayed. I can see it on other browsers. Please notify.
  However, I can see thumbnail when I move the mouse over the timeline of the video stream.
  concerning

  3 Paz,

  If you can't update your graphics / video driver, try turning off hardware acceleration.

• whenever I start PC as normal, that it would take me only a black screen

  ORIGINAL TITLE: I need help with my computer

  My computer has windows vista installed in it recently whenever I start it as normal, it would take me only a black screen where there is nothing else than the mouse there.
  Is there a way I can fix without having to lose all my data?

  Use the system restore:
  http://Windows.Microsoft.com/cs-CZ/Windows7/what-are-the-system-recovery-options-in-Windows-7

• cannot re start my system by getting only a black screen with recovery of window failure

  original title: do not re start

  I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
  Myrna

  Hi myrnaspiers,

   

  1. What is the exact error you get when you try to start windows.

  2. what type of installation you have done, it's a custom Setup or an upgrade.

  3. check if you have the option to go back to the old version of windows.

  I suggest you follow the link to black screen when I start Windows 7 below.

   

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

  I also suggest you start in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Windows Vista starts with only a black screen with the mouse pointer.

  Saturday, 02/27/10, I left my laptop (Dell Inspiron 1405 E) because I used Studio to produce a couple of videos.  When I got up in the morning, he himself had closed.  I tried to put on normally, and he said: recovery error windows, then on lists: Launch Startup Repair tool and start windows normally.  I tried to do a repair, but it just comes back to the same screen.  When I try to boot normally, it shows the progress on the background as usual bar, but then he comes up to a black screen with a mouse pointer.  When I run one of the many diagnostic tests, it is said that the BIOS cannot find the operating system loader.  I'm pretty adept at computers, but nothing I've tried before reinstalling Vista works.  I have files that I need to keep it on the computer, and only a few of them are saved.  Please help me soon, as I need for my school musical production on Thursday.

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system
  Restoration, it must only be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation which should save the data but you will be
  Maybe reinstall programs. It also requires the correct Vista disks especially for OEM
  versions. You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• test an application android to device central.

  Hello!!

  I just wanted to ask why when I try to test an application to the central unit, it refuse to test my application, although I chose the device supported for example a HTC smartphone that supported android applications.

  For more, when I choose in the main menu to flash pro control > test movie >... it grey option "test in device central" and I can not choose this option.

  does anyone here have an idea how to get rid of this problem?

  Cheers!

  Atar.

  Downloaded the profiles, the menu will active if you have selected the version of the flash drive normal instead of AIR for android.

  http://blogs.Adobe.com/actionscriptdocs/tag/Device-Central