Pavilion 15 n011tu: indicators of Volume and brightness is not displayed

Similar Questions

• HP Pavilion dv7-6c67nr: indicator of Volume and brightness does not

  I saw this problem in other threads, but none that are up to date.

  This happened to me often, noise indicator and light suddenly stops working. I also have audio Beats on my laptop. I have the keys f2 and f3 for the brightness and f9 and f10 to volume.

  Many of the other threads recommending the reinstallation or update of the IDT Audio driver. By using this site, I've updated the audio driver but still indicators are not displayed.

  Now what should I do?

  Thank you!

  Hello

  Try to reinstall the HP OSD utility at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

  Kind regards

  DP - K

• Indicators of volume and brightness do not work after a Fn-4 (sleep)

  They work OK if I start the system, if I change username or I restart the system but not if I SLEEP system.

  Solution?

  W540 w7

  Something that I found during the search of a solution, works fine for me

  Please follow these steps. And until you do, it does not work is because there is an error in the. JS script that is compiled into the Lenovo installation package. For some reason it does not replace the generic driver which is installed with the windows updates.

  1. delete all the Nvidia drivers.

  2 restart the computer.

  3. go in the local C: drive. (If you have already installed the driver of Lenovo) files should still be there.

  Yes local disk C:. Find the name of the DRIVERS folder, then go to WIN the case, then VIDEO. It should look like this C:\DRIVERS\WIN\VIDEO

  Then you should see 6 files including folders. The first thing you want to run the BrightnessStep. Then go to the NVIDIA folder

  4 C:\DRIVERS\WIN\VIDEO\NVIDIA and run the installer. Then, restart the computer.

  Once restarted, return to the same location C:\DRIVERS\WIN\VIDEO (if the level of brightness buttons do not work F5, F6) keep reading.

  5. now, go to the INTEL folder and run the Setup program. If it is already installed, reinstall again (it should say something like the currently installed version is a newer version. Just ignore that and install it).

  Your buttons F5 & F6 to control the brightness should now work. See you soon!

• The status of the Volume and brightness may not be indicated on the screen

  Hi all

  I changed my system preloaded Home basic to Vista Ultimate, all the drivers are installed and seams are functioning normally. But when I pressed the Volume or by pressing brightness key hot key, I can see the volume and the brightness set but there is no status (process bar) on screen is displayed.

  A does anyone know how to fix this? Please kindly let me know. Thank you!

  PIN wrote: first of all, check the display screen, click APPLY/OK. But this is not enough. There is a bug, so the size is not really defined, and you see nothing. That's why you need to change the size in the windows registry editor. Click Start-> RUN-> type 'regedit' BE CAREFUL with this tool! Press CTRL + F... and see all the way "OnScreenDisplay": change of HKEY_CURRENT_USER\Software\IBM\TPHOTKEY\OnScreenDisplay 'Size' value of "00 00 00 00" to "00 01 10 10" (right click on "Size"-> select modify Binary data). "" " Close the registry editor. That's all.

• Volume and brightness Popup no longer displayed

  The counters of volume and shine green popup I used to see every time I pushed the volume buttons at the upper left of the keyboard or the Fn brightness keys show no more. Volume and brightness can still be resolved, but I would like to be able to see the meter displays again. How to make a comeback?

  Have a look HERE

• The volume and brightness display showing is not on the screen when I change the volume or brightness

  Hi all

  My laptop used to display the controls volume and brightness on the screen when I would try to change. A few weeks ago, he stopped, and I'm just trying to understand how to solve this problem?

  Hello

  In this case, uninstall the current version, restart and then reinstall HP Quick Launch Buttons (1e) and SmartMenu again.

  Reboot after that.

  Regads,

  DP - K

• I placed a photoshop within a new image file and it does not display

  I placed a psd file in a new psd file and it does not display.  He scored on the screen for a while and then disappeared, and no matter how many times I try, it will not show

  I have started a new file, placed the picture and the screen became a weird pattern. I ended up closing the program and nine and it worked correctly.  Something went wobbly at the session, I guess.

• Pavilion DV5 - 2040ca: Volume and brightness not display when changed

  Hey all, I recently formatted my laptop, a HP Pavilion DV5 - 2040ca and I noticed that (even after installing the drivers), it does not display the current volume/brightness when it is changed via the shortcut keys associated with the F - keys. I was wondering which driver will enable this function on my laptop, because it would be good to have.

  Thanks in advance.

  Hello

  For your laptop, the screen on a brightness/volume is provided by HP MediaSmart SmartMenu - you can download this from the link below.

  Note:  You should have at least 1 other MediaSmart software installed (any) before installing this.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Volume and brightness graphic overlay more do not appear

  When I adjusted the volume or brightness I use to get a little graphic overlay at the bottom of the screen which shows a bar of what volume or brightness, I had. This bar was green, not particularly pretty, but I liked it. I don't know how this has been disabled. How can I activate this new?

  Thank you

  enter in the display property, do a right-click on the desktop, then go monitors-> setting advanced-> screen-> select on display. This should work for Vista and XP.

• Date and time are not displayed correctly

  The motherboard was recently replaced on my Pavilion dv6-2155dx.  Since then, my laptop does not correctly time.  It seems that once I turned off my laptop, the clock stops as well.  When I login again, the date and time displayed is the same date and time when I finally stopped my laptop.  I am running Windows 7 64 bit.

  Take the real time clock of your old Board stack and install it on the replacement or better yet, buy a new one. After that you will also be asked to load the BIOS defaults, click Yes.

  Post again if you need instructions on where to find the RTC battery.

• the look of firefox has changed. and it does not display the page corectly

  the look has to be changed. Yahoo home page is not displayed correctly. It shows a picture. I have all of my favorite web sites. When I go to them the pages do not display correctly also. I uninstalled and reinstalled firefox, it did not help. I hope this is enough information. I can not read or display my email when I log into yahoo e-mail. IE works fine.

  You are welcome

• After you download the latest version, I lost the familiar logon page and bookmarks is not displayed. How to restore the former opening page Firefox? For the moment I can not navigate at all.

  The Firefox window is not displayed at the top of the page. Therefore there is no Tools menu that I can't tell which version of Firefox, I downloaded as "about Firefox" is not displayed. I downloaded it last week so I guess it must be the 6.02

  Make sure that you are not running Firefox mode full screen with all the hidden toolbars.

  • Press F11 to toggle mode full screen (file/Firefox > fullscreen)

  If the menu bar is hidden, then press the F10 key or hold down the Alt key, which should make the convening of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

• pictures and graphics are not displayed to the top

  I visited several sites and seen this problem. Some appear and others do not appear, even after right-clicking and then clicking see photo. Any suggestions? I don't know if it's the browser or the computer itself.

  Hello

  1. what application you use to display the image?

  2. what web browser do you use?

  3. doesn't this problem occurs with the particular application or other applications?

  Additional information on the issue to help you further.

  I would also update the graphics drivers from the computer manufacturing and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are using Internet explorer,.

  I suggest to follow the link and check.

  Images are not displayed on Web sites in Internet Explorer

  http://support.Microsoft.com/kb/283807

• Sony VGN-AW41ZF "devices and printers" does not display anything, but they work

  devices and printers doesn't ' display anything, although all devices work.

  The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.

  Later, we don't know why, "devices and printers" display nothing.

  Just added a scanner, no problem, but once again not displayed.

  Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works

  http://eSupport.Sony.com/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And make sure that Windows is up-to-date with the latest Service Pack.

  See you soon.

  Mick Murphy - Microsoft partner

• Content of the table and other content not displayed

  mobile Adobe Reader does not display the content of the (a) tables and other graphics.

  Hello Marco,.

  Please contact us for the detailed report. This is much like a bug we have identified in our latest release and are about to get a fix for. I'll send you an invitation to the beta. If you want to join and try it, you should see that the content is fixed. If this isn't the case, I'd obviously love to hear. You are also welcome to send me the file so I can confirm that he has set myself at [email protected].

  Thank you!

  Pat