Pavilion 500: HP500-326na does not start... not the power of USB devices

Similar Questions

• HP Pavilion 500-314: keyboard does not work on startup

  At the start, that the keyboard is not working I have to unplug it and plug it back in

  to make it work. He doesn't do it every time that 1 in 10 starts. The mouse works fine.

  I tried differrent 2 same keyboards. Tried different ports samething.

  HP Pavilion 500-314

  Hello @jwhisenhunt,

  I understand that your desktop computer keyboard work correctly, and that this problem occurs with more than a keyboard. I'd be happy to help you in this case!

  This problem occurs if you start your computer in Safe Mode? Your keyboard is connected to a PS2 or USB port?

  In the meantime, I recommend that you follow the steps described in this document on the wired keyboard (Windows 8) troubleshooting. This should help to correct for non-response of your keyboard.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• 500-320 Pavilion: Pavilion 500-320 CD does not open

  I searched for an answer but did not find one for my computer. If I missed it, please forgive my control.

  I upgraded to W10 this month, but the problem that predates. I put a CD in the drive and closed. He has not played, and then I could not open again disk. This happened months ago. I have been using an external CD/DVD drive. I finally decided to tackle the problem.

  I saw something that said there was a hole in the drive and we could straighten a paper clip and stick it in the hole. I tried a hole but did not find.

  Can you help me?

  Thank you!

  Marian

  Hi there @Marian-Designs
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that your DVD drive does not open properly. I'm happy to help you with this.

  Please see the following document. It does not include the method of release the tray using a paper clip or a small screwdriver key or alan. It shows some of the places where the exit is. There are others, in general, looking for a small hole or a notch in the chassis under the tray.

  Desktop HP - Open a stuck CD or DVD Drive Tray (Windows 8)

  Also here is a Youtube video where you can see it done.

  How to manually open a CD or DVD player. -youtube.com

  If this solves your problem please mark this message as a solution.

• Pavilion 500: Version identifier # does not

  I'm having a problem with my restore set HD DVD drive.

  I edited the version identifier to match one on the DVD again the value sent to HP, but it wont let me enter # instead when I press on # happens as \.

  I tried different tones, but nothing seems to give me #.

  I need to enter #SABU #DABU for the British at the end of the version identifier, but # does not work.

  I tried 2 different keyboards and it does the same thing, so I guess that there is some code secrec I need to enter so that it reads as # in the version and no identifier.

  Hope this will make sence.

  Please if anyone can help as long as I get a red error screen saying language pack is miising but I know it's because I can't enter the code for the correct language version identifier.

  Why the work habit # when you enter the version identifier?

  Thanks in advance

  Will be.

  I solved the problem now... by pressing SHIFT and number 3 you get # when you enter this BIOS version identifier.

  Anyone who has this problem here is your answer.

• Laptop does not - the power adapter light flashes three times? G62 b29SA

  I was replacing the fan in my friend's laptop computer. I had a problem with the trackpad works not once I put back it together and this problem is not yet solved, but I have another problem that prevents me from getting more. Now when I press the button, the light power adapter (next to the socket for external power) flashes three times and that's it. It flashes three times, whenever I press the power button. It does this even with a connected external power supply (I'm sure it's supposed to just stay on constantly when the charger is plugged in but the power source I have is a universal set of one to 19 V - he was fed up with this trendy before but I don't know if it was taken in charge of it). Any advice?

  I have the charger of my friend and now it starts very well. There seems to be a lot of sense for the three flashes based on my Internet research, but in this case, it seems that it is a way to indicate a low battery.

• Pavilion 500 series: printer does not complete the print job & error message

  Got a HP Deskjet 2542, but recently bought a new HP, Pavilion of the 500 series desktop computer.  When you try to print a document that is located at 3 pages, it will print the first page, and then part of the second page, then an error message appears.  Went to the HP troubleshooting & tried everything, but nothing seems to fix the situation.  Any ideas or suggestions?

  Hi @Themommy,

  I saw your post about the error message that appears when printing with your HP Deskjet 2542.

  I need a little more information to give you the best course of action.

  What is you receive the exact error message?

  Without this error message, I suggest trying a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing problems. I recommend you to download and run the HP print and Scan Doctor, if she doesn't fix it automatically let me know what errors or messages that you receive.

  You can always try to uninstall the printer software and then by downloading new firmware for you printer. Click on this link to get the all-in-one HP Deskjet 2540 Printer series full feature software and drivers.

  Just note that you may not be able to download the software right now. If you click on the link above and you get this pop-up window, you may need to try the page later.

  

  Please let me know if these steps solved your problem, or you receive the exact error message.

  I look forward to hear from you!

  Thank you

• Satellite does not - the power light flashes

  I tried to turn on my laptop and there is a yellow light where the green power light should be, and he won't even be able to until this could be

  Hello

  What laptop do you use?

  Seems the laptop provides a blink code. This means that a material error has been detected.
  Usually short blinking means 0 and a long time means 1.
  The authorized technician must be able to read such a code and to locate the hardware failure.

  Above all it s something wrong on the motherboard!
  Then I n t think you will be able to fix it. This is not possible if you have no experience and the right tools and parts of s.

  So in my opinion, you must contact the ASP in your country for assistance!

  Good luck

• HP Pavilion 1209sz g6: laptop does not turn on

  Hello

  My HP Pavilion g6-1209sz lights. When I press the power button, this will happen:

  -I can hear the computer start, but the fan won't move;

  -l' screen stays black

  -the led power button on and near the power adapter is turned on (white), the led on the wireless button is on (red)

  - about locking cap button led flashes 3 times.

  This has happened before:

  Yesterday, that the computer does not light at all, nothing at all, except that white led near the power adapter is on.

  After that I disassambled computer, thinking he was dead, and at least I'll have fun. I removed the motherboard in order to clean the fan, which was completely clogged with dust. Now, I assembled the computer again and it seems in better shape than yesterday, because at least I can hear it lights and more LEDs are on. So I have little hope that he is not yet dead.

  Maybe I made a mistake when I assembled the computer. I read http://support.hp.com/us-en/document/c01732674 that the number of flashes on the cap lock button can help to know what hardware has a problem here.

  Thank you in advance if anyone can help me.

  Flash123

  Hello

  I found the answer to my problem here: http://support.hp.com/us-en/product/hp-pavilion-g6-1200-notebook-pc-series/5145704/document/c01732674/

  This page lists the meaning the number of flashes on the cap lock button. The 3 flashes, I had meant that the RAM had a problem. He simply has not been installed correctly.

  After that, I was able to start the computer, but he has immediately told me that the fan was not working properly and that it would be closed within 15 seconds. Next step is to check the fan, maybe that I also made a mistake after you have cleaned the fan.

• HP pavilion dv2000 key board does not

  Hai

  HP pavilion dv2000 key board does not. I have activated the key online Board that also does not work. because my hp utility cd has been damaged, I changed my OS to windows 7 key board ultimate .the rest is notworking .then I used a USB key Board that works also do not. main problem is that I couldn't filled my Os Installation with to enter the pc name. Plese help me. the original OS was Vista.

  with our thanks

  Joseph

  Hello @pxj,

  I understand that your laptop keyboard does not work, and that your alternative keyboard does not work as well. I'd be happy to help you in this case!

  As your drivers available of the system does not contain the keyboard for Windows 7 drivers, I recommend you to get a drive recovery to re - install Windows Vista on your system. This can be done by following this document on getting a HP recovery disks or USB HP recovery disc.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal?

  Hello

  My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal? I can't see it anywhere, should I worry?

  Some laptops, like my Envy 17-3002ea loan, have the certificate of authenticity Windows hidden in the compartment where the hard drive and the battery are.  First try.

  Other portable latest and which may include yours, have the Windows license key encrypted in the BIOS.  There is a thread on the Microsoft communities that verifies that. The thread is worth reading.

• I have a Pavilion 6620f and it does not show me the type of motherboard. It lists only the DVT 2AB1

  I have a Pavilion 6620f and it does not show me the type of motherboard. It lists only DVT 2AB1 as the system board. How to find the right model MB?

  No, this isn't what I remember seeing at the same time. I downloaded a program called BeLarcx Advisor, he told me I have a FOXCONN 2AB1 DVT and I have an ATI Radeon 4200 in there.

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• HP Deskjet 9800: DJ 9800 does not supply power to the top

  It is a great printer for many years until he died a year ago.  Since then, the printer not illuminate when you press the power button.  Very closely, I followed the HP, troubleshooting guide for power supplies, but had no success in getting the printer to turn on.

  When the power cable is connected, the green light on the internal power module is running.  With the module removed PS from the back of the printer of the housing, the measure 32 VDC output voltage, such as specified on the SP module.

  Below two cartridges (in position 'House'), there is a 'plateau' that moves up and down like ink cartridge transport movements and get out of this 'original position '.  A vertical flap on this tray blocks removal of two ink cartridges, perhaps an indication that the printer has stopped operating in mid-way through a sequence of leave or return to this 'original position '.

  That's all I saw.  I really miss using this printer for some projects.  Your help will be greatly appreciated!

  Thank you

  Rick

  Starting from 13/12/15, there were 74 views of my original message.  Thanks to all those who read.  Especially thanks to the green turtle which offers several good troubleshooting suggestions.

  As stated previously, the power supply for the 9800 DJ works well, even providing full voltage with a resistive load, and slightly above its rated capacity.  By pressing the power button, however, does not the turn on the printer.

  Apparently the Control Board has failed and the printer is toast.  Rather than spend more time on this problem, the only logical remaining task is to put the printer in the County for the manufacture of electronics recycling bin.

  Thanks again, all.

• Why does not the priority setting?

  Why does not the priority setting? I put the nets with different priorities, but it does not work. Any suggestions? Thank you!
  
  *
  * To change this template, choose Tools | Templates
  * and open the template in the editor.
  */
  
  package mythreadthree;
  
  / public class MyThreadThree implements Runnable {}
  
  Thread t;
  private volatile Boolean race = true;
  
  public MyThreadThree (int p, String tName) {}
  t = new Thread (this, tName);
  t.setPriority (p);
  }
  
  public void run() {}
  System.out.println (t.GetName () + "running.");
  }
  
  {} public void stop()
  running = false;
  System.out.println (t.GetName () + "stopped.");
  }
  
  {} public void start()
  System.out.println (t.GetName () + "started");
  t.Start ();
  }
  
  Public Shared Sub main (String [] args) {}
  
  Thread.currentThread (.setPriority) (10);
  
  MyThreadThree lowPriority = new MyThreadThree (3, 'low priority');
  
  MyThreadThree highPriority = new MyThreadThree (7 'high priority');
  
  lowPriority.start ();
  highPriority.start ();
  
  try {}
  Thread.Sleep (1000);
  } catch (InterruptedException e) {}
  System.out.println ("Main thread interrupted.");
  }
  
  lowPriority.stop ();
  highPriority.stop ();
  
  try {}
  highPriority.t.join ();
  lowPriority.t.join ();
  } catch (InterruptedException e) {}
  System.out.println)
  "InterruptedException caught");
  }
  
  }
  }
  
  Like most exits are:
  
  low priority began
  highest priority has begun
  low priority running.
  priority running.
  been low priority.
  continued high priority.
  
  Sometimes, it displays:
  
  low priority began
  highest priority has begun
  priority running.
  low priority running.
  been low priority.
  continued high priority.
  
  the high priority runs before the low priority, what should happen all the time.
  
  Published by: user13476736 on December 14, 2010 07:41

  user13476736 wrote:
  Thanks a lot for your test! It's very funny. However, I got different results you have obtained.

  Most of the 10 priority thread time runs out before the thread of priority 1, but sometimes, priority 1 thread runs before. Any suggestions?

  My suggestion is to read and understand the API documentation and the posts in this thread and accept the fact that you can't predict what effect, if any, will have priority.

  Why do you think that you need to fight it anyway?