Pavilion dv6 3104sl: HP bundled SW/Suites after upgrade to win 10?

Similar Questions

• Pavilion dv6-3225dx: laptop fails to boot after upgrading RAM.

  Hello

  Recently, I tried upgrading my laptop RAM 8 GB which is max you may have to wait. The RAM sticks were (x 2) DDR3 4 GB Samsung 1600 12800 mhz 1.35v. The system has detected the new RAM, showed the new memory and even spent the memory test. But this isn't the windows startup. I tried to clear CMOS. But without success. Do not let me windows. BIOS version is up to date (F29). Is there any setting for this?

  Thanks for all the help!

  Hello:

  Please see this discussion.  It must be very picky about what memory you use in your model series...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/Pavilion-DV6-Windows-10-wont-boot-after-memory-upgrade-4Gb/m-p/5776161#M359223

• HP Pavilion dv6-3150us Notebk: space low disk after upgrade to version 1607 Windows10

  In the month of August I have improved my laptop Windows 7 Home Premium Windows 10.  Everything worked fine for a month now until Windows 10 1607 version has been highly recommended by people of Windows 10.

  After having updated with all updates faithfully, but as soon as I tried (four times) to install Windows 10 1607 version, then the step of time again to return to the previous version of Windows.  Then I hit a brick wall.  I always get the error message: "low disk space".  And Windows is continuously remind upgrade me to 1607. As in the famous movie, it's a catch-22 situation.

  I read part of the help Forum and led to a link suggested by a member of the staff of HP as the only resolution available.  The link for this low disk space error problem is http://support.hp.com/us-en/document/c03736755.

  I translated the link Windows 7 instructions in organization style Windows of problem resolutions 10 and is in the section "Files and folders" and then followed the steps in Windows 7.  But I always hit a brick wall.  In the view of files hidden on my recovery disk (drive D I checked I didn't backup any personal files to occupy space unnecessarily.)  I also emptied the previous system restore and just did a new restoration of the system.  But still the same problem.  It seems I need to extend my recovery disk for Windows 10 version 1607.  But by following the steps in the evolution of my partitions, the option to extend the recovery disc has been shaded and so available.

  Is it possible to enlarge my recovery disk? This laptop is great and has a lot of life left.  I don't want to have to buy a new one just to work on this problem of low disk space error.

  Desperately need help because it is the only computer for our family.

  Sorry do not provide the follow-up to resolution as soon as possible.  Here's how my problem was resolved:

  I asked my son to help IT specialist.  He re-partitioned my computer using a free software tool (AOMEI Partition Wizard Standard Edition).    I choose to add 50 GB of my unit (recovery drive) which then totaled 68 GB for this drive. because I wanted to ensure this problem wouldn't come back and I had space to work with.

  I have worked with this resolution now for about a month and have a zero problem.  What I noticed, was that after a few weeks 10 Windows should have automatically cleared out my previous updates because Windows Explorer now shows that this drive has a file size a total space of 68 and 51 GB that is not used which brings my use of the reader to 17 GB.

  I am guessing that before Windows 10 empty automatically previous updates that he needed somewhere between 20-25 Go make the final version of 1607 upgrade and retain earlier versions (for me to return to the previous editions).   Then the end of the period of time to return 10 Windows must have automatically deleted my previous editions and just kept upgrading version of 1607.  In hindsight I would have added 50 GB on my drive - on another 10-12 GB would have been more than enough for this transition period to work.

  Finally I am EXTREMELY well pleased I did the update of Windows 10 and then added the update of the birthday Version (1607).   I like the added security features and a large number of features and benefits.

  Hope this helps others.

• Satellite L755-M1M3 driver sound problem after upgrade to win 10

  Salvation;
  I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

  Inability of Toshiba to make the solution, always shocks me. !!! ???

• Latitude E5520 Audio problems after upgrade to win 10

  I have audio problems after upgrade to win 10 64-bit.

  Dell Latitude E5520 IDT 92HDxxx HD Audio
  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

  (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

  I would be happy to provide more information and help to debug.

  To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

  *************************************************************************
  Hello
  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows. Check their documentation online with Dell Support, and
  drivers and ask questions in the forums about known problems. Make sure that you are
  Run the latest version of the BIOS, chipset and drivers.
  I hope this helps.
  *************************************************************************

  I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  Thank you
  John D.

  johnsdagg

  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows.

  Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

  johnsdagg

  I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

  johnsdagg

  If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

• HP Pavilion dv6-3150us Entertainment Notebook not start after sitting on the side.

  Hello! I have a HP Pavilion dv6-3150us Entertainment Notebook that works under Windows 7. Last week, I traveled with him in Florida, and when I arrived and tried to turn on the laptop, it wouldn't start. The screen was white with thin lines going through it and the screen turned slowly black. I disassembled the computer and put it back together (which I have experience with, I installed a new fan at the beginning of last year) and he came in safe mode. This ihappened still once I put the laptop in my bag on back and then he pulled out a few minutes later (without even moving) and when I got home. I tested the hard drive and memory, and they both passed. Other that this question, the computer has worked fine. I need to get this problem solved, because I am a PhD student and travel frequently with your laptop. Could someone help me please? What causes this problem? Thank you.

  Hey irol72,

  Welcome to the Forums of HP Support! I understand that your HP Pavilion dv6-3150us is not initialize after being on his side, I understand your frustration and I would start you the black screen troubleshooting with no. Error Messages at startup or start-up.

  Thank you

• Pavilion DV6-6B26US completely crashed the month after warranty

  The month after my warranty was up (January 2013) my laptop started getting blue screens that would freeze the laptop.  He has never published a journal of the accident.  I ran the recovery disk and restored to factory condition.  He worked for a few weeks then happens again.  I've tried everything.  Test drive are good after restoring to factory State, but after a blue screen, I can no longer run test.  I have restored at least 4 times.  Now my laptop is not working even in safe mode, and it will not work the recovery.  I read to try to install windows 7 from a windows disk, but that will not work without the driver for the hard disk, that I can't go anywhere.  With all the problems that I have just read on this laptop, why HP does not solve this or making it right?  I have a Toshiba laptop which has worked for 7 years. (touch wood)

  Anyway, if someone has a miracle in difficulty who does not buy a new one or pay for technical repairs, please let me know.

  Here's my info:

  HP Pavilion dv6-6b26us

  Windows 7

  Buy Jan 2012

  Seagate hard drive / model ST9750420AS / pilot was 6.1.7600.16385 / firmware 0003HPMi / series[personal information deleted]

  Thank you

  I had to replace the hard drive for this problem.

  Thanks for trying to help.

• HP Pavilion DV6-6117dx - horizontal flickering lines appear after the display turns off automatically

  The DV6-6117dx model (as well as other HP Pavilion laptops) have experienced a problem where the screen will display a flickering, horizontal line to the top of the screen, after it has been automatically disabled (note: not in sleep or Standby Mode).

  There is a setting to "off the display of [X] minutes" in power options.  I have my DV6-6117dx value dim the screen after 10 minutes and turn it off after 15 minutes of inactivity.  Sometimes, but not always, when I move the mouse to turn the screen back on, a couple of flickering horizontal lines will appear at the top of the screen.  It is very annoying, and the only way to remove them and to have the screen back to normal is one.) put the computer to sleep and wake it or b.) restart the entire system.

  Everything by putting the laptop to sleep and wake-up is not a huge problem, I wouldn't do that, period.  I owned a laptop Toshiba for about 6 years and never had a problem with her like this (the reason why I bought a new laptop was because my old man was 6 years old and the technology was outdated a lot, a lot).

  HP says it's a software problem, but it did come with a way to fix it yet (at least not that I've found).  I ask all the 'Experts' out there if they have a final way to solve this common issue experienced by some models of HP laptops?  I said to uninstall and reinstall video drivers without success.  I said to install video drivers only to AMD, and then only to HP, and then only from Windows Update, but none of these solutions worked.  I said to update BIOS, but it does not solve the problem.  I told him to try to restore the system to the factory settings, but this did not help.  It is obviously a software problem, but nobody at HP seems to have a definitive solution, how to fix it.  Is my only hope to return to my laptop to be replaced by a different model entirely?

  I hope that someone out there has an answer, it's a common issue that I know a lot of owners of portable HP experienced.  Thank you!

  Hello
  I think it's the right time to get in touch with HP and use the guarantee. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

  You can also try the suggestions from the link below before you send it to the service:

  Common issues with the screens

• Pavilion Dv6 6159tx recovery of windows 7 after linux without recovery disks.

  I have pavilion dv6-6159tx computer laptop operating system Windows 7 Home Premium 64 - bit by default. I wanted to make my laptop to work in dual mode with Linux.But in this process has been formatted my whole hard drive. Now, I installed linux but I want windows 7 back. I also lost my recovery discs. I tried recovery disc to order from my laptop from the hp Web site but can't find it. I'm in a fix what to do now. Please provide me with as soon as possible. Desperately waiting for your answer

  Hello

  Here's another solution, that you could use.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally came with your laptop - IE Windows 7 Home Premium ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Pavilion P6130F blue screen after upgrade to Win 7 because of the NVIDIA graphic card

  My computer was working fine under Vista 64-bit. I got the upgrade CD Win 7 64 bit. The installation went well. But after a few days I get BSOD. The computer hangs at random: opening Visual Studio or even open a folder. The graphics card shows as NVidia GeForce 9100 in the Device Manager. I downloaded and installed the latest driver from HP site. That did not help. Then I installed the latest driver from NVidia site itself; This file is named: 195.62_desktop_win7_winvista_64bit_english_whql.exe, but that did not help either one.

  Taskbark of the window has a message that 'graphic NVIdia has stopped working"and then recommend downloading drivers.

  I used the program "WhoCrashed" and that's what he said:

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Saturday, November 28, 2009 16:12:22 crashed your computer
  This was probably caused by the following module: nvlddmkm.sys
  Bug check code: 0 x 116 (0xFFFFF8801013E230, 0xFFFFFA80074ED4E0, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  Empty the file: C:\Windows\Minidump\112809-25646-01.dmp
  file path: C:\Windows\system32\drivers\nvlddmkm.sys
  product: NVIDIA Windows Kernel Mode Driver, Version 195.62
  company: NVIDIA Corporation
  Description: NVIDIA Windows Kernel Mode Driver, Version 195.62

  Help, please. I don't want to spend hours either roll back to Vista or reformat and start over. It is losing too much of my time.

  Thank you!

  Install this hotfix

  http://support.Microsoft.com/kb/976972

• Pavilion a6623uk: Incorrect graphics card info. regarding the upgrade from win 10

  Hi try to enter to win 10 update, m/c has the card radeon hd 3400, which shows in the Device Manager and the plug for HP support assistant. The app to win 10, continues to tell me I'm inconsistent because it is not supported by the Nvidia Geforce 6150se nforce 430, which is the integrated graphics card. I uninstalled this software nvidia and set the bios to serve as the primary graphics radeon, any ideas please

  Thank you

  Hello:

  If you are ready to roll the dice, see if it works...

  Try direct download and immediate upgrade method.

  http://www.Microsoft.com/en-us/software-download/w indows10

  I think you can use W7 32 bit nForce 430 chipset driver, it might work.

  You may need to install the driver manually if automatic installation method does not work.

  W7 32-bit driver chipset...

  14874/en http://www.nvidia.com/download/driverResults.aspx/

  While I am not employed by, nor do I represent HP, I can almost guarantee you that nobody will develop W8.1 or W10 graphics card or chipset drivers.

  You'd have to roll back to W7, if the suggestion above does not work.

  Here's how backward...

  ws-version-after-upgrading-to-windows-10/ http://www.askvg.com/how-to-restore-previous-Windo

• Cool eco does not activate the Portege Z10T after upgrading to Win 8.1

  I mainly use my Ultrabook plugged in power & after upgrade to 8.1 Win Win 8 the "Eco-Office" is no longer active, constantly charge the battery to 100% when it should be 80%. I discharged the battery up to 10% and then active eco-responsible, but without success.

  Anyone have a solution please?

  First question:
  After the upgrade of Windows 8 to 8.1 Windows did you download the installation drivers Toshiba and such software mentioned in the installation instructions located on the Toshiba UE driver page?

  Its very important to install and update the Toshiba Utilities to get a good Win 8.1 working system.

• No output micro HDMI after upgrading to Win 8.1

  My new Yoga 2 Pro has a secondary display connected via micro HDMI port. He first worked as a charm. But after upgrading to new Windows 8.1 (this is done automatically) it is no longer produced anything to micro HDMI port. Display and the cable is fully functional. But even if the screen is turned on, the computer is unable to save and apparently it cannot display anything. Micro HDMI port seems to be non-existent.

  After upgrade of windows, I tried to uninstall / reinstall the display driver. I also upgraded to Win 8.1 Intel drivers versions found on the support site of Lenovo (including the BIOS display driver Intel HD 4400 15.33.18.64.3496 and chipset 9.4.0.1026, 76CN38). But nothing seems to work.

  A solution in the forum is to change the cable, but I think that there is no sense here that the cable worked perfectly until the upgrade.

  Can anyone suggest a solution?

  Lenovo: Is there a driver for Intel version 15.36.0.3652 on the Intel Web site. However, there is a blockage on the pilot, you need to install own Lenovo driver downloads. Can you check if this solves the problem?

  Sorry, a new cable solves the problem

• T430s and create recovery media after upgrade to win 8 Win 7

  Is it possible to create a recovery media after upgrade to Windows 8 of a factory installed Windows 7?

  You do before the upgrade.
  NO.

• Error number: 0x8024400A after upgrade to WIN XP...

  Reception [error number: 0x8024400A] after recording of WIN XP for updates reviews... What is the work around from a fresh install of WIN XP Pro?

  Hello

  Try the methods provided and check whether the problem is resolved.
   
  Method 1:
  Check out the link and follow the steps.
  
  Cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP, or after you install Windows XP SP3 immediately after a clean installation of Windows XP SP2.
  http://support.Microsoft.com/kb/943144
   
  Method 2:
  You can also visit this link and follow the steps.
  
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941