Pavilion g6 problems when gameing
Hello!!
I have Pavilion g6 2230ew, with Windows 8.
My problem is when I play the same games with 3d graphics (Machine of Diablo 3, Fifa 14 amnesia, for pigs) the game is corect runing ony for 5 minutes, after this time begins to crash, and graphic hang.Computer start is after cleaning dust, if it did not cause any problems.
Someone help me?
Hello gosik6661. I understand your computer will lag and crash when playing games. I will do my best to help. Please ensure that all your drivers are updated and installed. Please use the HP Web site to download and install the appropriate drivers.
Once these are installed correctly, please check that your Windows updates are complete.
If the performance is not better, I'll continue further problems. Thanks for posting on the HP Forums. Have a great day!
Mario
Tags: Notebooks
Similar Questions
-
HP Pavilion dv6 problem. Computer off with warning message. Help, please.
My HP Pavilion dv6 notebook PC is a little over a year old and has this problem: when I unplug the charger, the computer dies at random. It turns off without warning and won't turn on until I put the charger in.
The battery can last 20 to 80%... or it's what he sees when it restarts.
Where is the problem? battery or hard drive?
Help me / give me advice in any way you can please!Thank you!
Thanks for the follow up, if I feel sorry for the results you had. Visit this link for information on buying a spare battery.
Please let me know if I can be to continue his service. -
PROBLEM when scanning multi-page pdf
Hello
Since the update of the sierra, I have a problem when scanning multiple page document. If I check the checkbox "merge pdf" in the scanner window, first page works fine but when I scan page #2 or one of the more page don't merge in the file pdf which flashes briefly in the sidebar, but still with only one page...
I tried with another scanner (diff brand and model) and the same problem, so not a driver issue...
any idea?
Thanks in advance
Stephane likes
Best I can tell with Sierra make a pdf of many a scanner using the preview page is completely broken. Time to report through www.apple.com/feedback/.
-
Why firefox is always problem when I put cache 0 MB Web site?
Hello
I develop Web sites and about 1 month, I think that to the top of the Version 30 or 31 have problems with the cache.
I activated the manual cache size and set it to 0MB (Web sites), but I still have problems that a site is cached.
In development, it's a big problem, when the browser still shows you an old page. I have change something in my code, but it does not apear when I reload the page. When I opened another browser chrome for example I see my changes.
BTW, I don't like chrome and I was really happy when I stay in firefox. But the described problem could couse me to change browser.
Best regards and continue to have fun in dev
Michael Topor-GrabowskiHello Michael,
There are actually quite a few ways to accomplish what you're trying to do. To refresh the page without querying the cache, the simplest method is to type ctrl and f5 instead of simply typing f5 or hit the button reload. The second would be to set up your development web server to transmit the "Cache-Control: non-cache ' directive cache so that any browser you test with, (as long as it is in accordance with w3c) does not cache the hosted Web pages. The last method should be considered as a last resort, but you could also disable the cache of Firefox by activating / disabling the network.http.use option - Hide all: config to false. Remember, once you decide on one of these methods to clear your browser cache before testing again. -
My USB to ethernet adapter works only if plugged into my MacBook Pro.
I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!
Any suggestions?
Juice what 'expander' did you use?
What model of MacBook Pro?
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
Can software update on iphone cause problems when my computer can only move to Mountain Lion?
Can software update on iphone cause problems when my computer can only move to Mountain Lion?
When my computer can only be upgraded to Mountain Lion?
Any Mac that can run Mountain Lion can run El Capitan, as long as the conditions are identical.
Too little information: you must identify the model of your iPhone and explain exactly your problems. There is no way that anyone would be able to help otherwise.
-
I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason
http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.
-
Question
I have a problem when I want to print an email page.it shows me an error that seems to come from a program that blocks the emerged Windows.ce do sais.what do? EditCan you check this problem on Firefox 9?
-
There is a problem when I click on the tab '+' to 'open a new tab' nothing happens. It allows to open new tabs, and now it does nothing. Even when I go to 'File' and 'New tab' it still does nothing. The only time wherever I can get a new tab to open is if I go to 'Help' and click "Firefox Help" then opens a new tab with firefox help.
Please disable or uninstall the extension "Ask Toolbar". He has a known compatibility issue with the latest update of Firefox.
-
in iBooks author, how can I change the book ID? I update often books and hand but ID remains the same, so it caused problems when others discover. I wish it were as if it were a new book with a new code.
From the link 'related items' below, see:
-
His problem when using AC adapter / CC on satellite
Hello everyone, I have a sound problem when you use the AC adapter / CC in my laptop, it produced unpleasant noises. But it works very well when working with the battery.
I had no problem before this month. I thought it was the problem with the bios and updated my BIOS as well. The problem is still not resolved. have you guys any experience about it.Looking to hear from you guys.
Hello
First, I would try to update the audio driver. Check out the Toshiba page and reinstall the driver. If it doesn't solve this problem, I guess that there must be something wrong on the motherboard. Unfortunately, it is not easy to say exactly what's wrong.
Diagnostic tests are needed to find the fault.
In this case, a call to the service in your country partner would be very good idea. -
Problems when you try to move the 3 stepper motors
Hello
I have problems when I Isaiah to compile a 3 stepper motors control program.
I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.
I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.
-J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).
-If I try to make a sort of sub - VI is the same thing, only one motor is driven.
-Moreover, I get a warning when I try this, I have attached a screenshot of this.
I have attached the Vi and texture it to improve my description.
I woul be grateful if someona can help aport.
Kind regards.
Thanks for posting the original. By comparing the two screws immediately gives an indication of what might happen.
In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats. So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.
What you need to do is to divide the example VI in at least three parts. The first part initialization. The next part moves the engine. The last part ensures that the engine is stopped and made any required another stop. Each party becomse a separate Subvi. Each Subvi has the address of the reader as input. The initialization and shutdown parts are placed before and after a while loop. The movement parts are inside the loop. You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.
I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.
Lynn
-
I have problems when I shoot in raw + jpeg. RAW files seem corrupted!
I have problems when I shoot in raw + jpeg. It seems that the raw files get corrupted. I shot raw without a problem. It's only when I shoot in raw + jpeg. Raw files will not appear in Photoshop elements. I installed the Canon software and could see all the raw files; However, I noticed that when I tried to post some full screen they would not show. I also noticed that these block-ish look raw files. They appear more digital research. Is there a specail required in RAW + jpeg map? I formatted ones I have before their use.
Thank you all for watching my post. I shoot with a 60 d using Photoshop Elements 10. Finally, I called Canon tech support and found out it was the card reader that was causing problems. When I used another card reader, I was able to transfer the Jpeg and raw files. They advised me to connect the camara to the computer to transfer files. I learned to use a card reader and have for years. It was the first time, it caused me problems.
-
Audio problem when I capture video in Movie Maker
Hello
I have an audio problem when I capture video in Movie Maker (version 5.1, using XP).
The sound is out of sync, the sound is played several seconds before the video.
His 18 months ago that I tried to capture video with movie maker. y at - he miss an update
What can I do to solve this problem, please
Hello
I suggest you according to the question in this forum and check if that helps:
http://www.windowslivehelp.com/forums.aspx?ProductID=5
It will be useful.
-
network adapter AutoDetect fails
Hello:I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).
Using the command ipconfig, I found that these cards are not detected. (Although without wireless/LAN icons do not display the modem connection). Also, if I go into Device Manager, I see network cards. BUT if I select "research material changes", then the other adapters will appear (those of Privacyware) and internet connection is reset and it will work then. I wonder why windows does not detect this kind of cards automatically when I start it.This problem occurs only in my laptop - I installed the project Feederwatch on a laptop another XP and it worked, so Privacyware cannot provide a solution, since seems a very specific problem.
Thanks for any idea!
Seems that the solution was:
1 - Open Device manager and view the hidden devices.
2. then go into not connectable & play devices and manually delete all the remainers network software & security uninstalled (process antivirus, firewall, monitor).
3. several reboots were required in order to know if the garbage problem has been removed.
Maybe you are looking for
-
re4000w and setting the channels with wrt54gl
Hello Could someone help me I have a wrt54gl and want to use re 4000w, is it possible, that I can't see ay area set the channel on re4000w. Set to auto dhcp, or this unit only works with wrt54gl in static mode? Tony
-
I can't install avalon hills third riech on windows vista
When I try to install it says that my it cannot run full-screen mode. I tried to change to windows 95 and windows xp compability mode but no dice. I also tried run as admin, once again no dice. can anyone help?
-
Photosmart Premium left me very unhappy. I stopped to buy HP more than a decade and now I'm wishing that I would have stuck with my decision. Myself and 3 other friends have bought these printers and both of us have had problems. I went through the
-
I can't get the session go full screen after be kept to a minimum. I did the following things to make this work: Updated the operating system Check my RDP options to make sure that it is set to mode full screen I tried 3 different computers that it h
-
Cannot move/delete/rename a folder
Hello I have an Asus laptop with Windows 7 Home Premium 64 bit. Recently, I had experienced technical difficulties following a computer breakdown. These difficulties have been resolved, but now I have a new problem. There is a folder on my desktop th