Pavilion HPE h8xt: device disconnect sound parts despite nothing being disconnected

Similar Questions

• Support for VMWare VT on HP Pavilion HPE h8xt

  I just bought a new HP Pavilion HPE h8xt and want to use VMware player to create a virtual using Windows 7 64-bit computer.  When I tried to do, VMware has informed me that I had to enable VT in the BIOS.  I restarted the machine and press F1 and F10 and have a 2.10.1206 interface of American Megatrends, who informed me that THE system BIOS has been CHG_705.ROM v7.05.  Anyway, I can't find any associated BIOS Setup option.

  The processor is an i7 2600, which is quite common.  This processor supports VT?  I just need to load a new BIOS?

  Thanks for any help!

  Hi Trailway,

  You should be able to boot into the bios and look for VT usually, it is disabled by default. You might find that it listed on the tab of the System Configuration.

  Run this program.    Test for 64-bit hardware  She say on the hardware virtualization?  Yes or no?

  Another test would be to download and use PC Wizard. Click processor under the hardware then scroll to virtualization. It should indicate Yes and if it is enabled or disabled.

  What is the number of exact product for your PC?

  I do not have the Intel i7 - 2600 k but my bios is different from the bios of your PC.

• Pavilion HPE h8xt power supply concern

  I'm considering buying a new HPE h8xt, specifically this one.  I also want to add a 120 GB SSD and I fear the standard 300W power supply will not be sufficient.  I know an SSD does not a lot of power but the computer seems already sorely in motorized with 16 GB of RAM, Blu - Ray, 1 GB DDR3 1 TB HDD and AMD Radeon HD 7570.

  Can you make a recommendation? I talked to HP support and they said that was enough, but I find that hard to believe.  I don't want food dying on me after 6 months because it is more work. Also, it would void the warranty on the power supply if I add an SSD?  I can see HP being a pain on this one.

  Hello

  Great choice for an upgrade of the power supply with the Corsair CX500. Yes it fits the case and it has lots of power for larger video cards if you decide to upgrade to a video card more great.

  For the same price, you might want to consider this SSD 830 of Samsung. It has a high rating in a couple of recent magazine articles.  The OCZ Vertex III who I use were noted in magazines of same last year.  I have no opinion on the Kingston SSD.  Revise the rates of I/O that choose your SSD. All three appear to be close.

  What would I do? I'm pretty handy to autour material exchange and migration of images.

• HP Pavilion HPE h-81287_c: have sound but strong pulsation noise?

  Windows of h-8 c of the HPE 7 Prof. 1287
  I had problems with no sound now I kinda sound but noise pulsated unless I have activate the drummer speaker Stereo Mix IDT High Definition audio volumn down then the noise stops.

  I tried to update the driver in original # 8 pilot Original IDT High definition audio driver three times and still a problem with the sound?

  Updated all the drivers except the 3, 4, 6 messages?

  Original driver
  #3 (9996), #4 (256), #6 (256)
  try to update the drivers and failed?
  45fmj

  45FMJ, welcome to the forum.

  This is the troubleshooting section for Sound & Microphone to your computer.  I would suggest trying each guide that relates to your situation; in particular, the first guide titled "Using Automated Troubleshooting (Windows 7).  It can solve your problem without going any further.  Sounds like you are getting sounds fan through your speakers.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge

  You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!

  @ Big_Dave

  Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;

  Intel Core i3-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i3-3xxx (Ivy Bridge) Dual Core	456
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core	152
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core	756
  Intel Core i5-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxxK (Ivy Bridge) Quad Core	676
  Intel Core i3-2xxx (Sandy Bridge) Dual Core	756
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core	256
  Intel Core i5-2xxx (Sandy Bridge) Quad Core	95W
  Intel Core i7-2xxx (Sandy Bridge) Quad Core	95W
  Dual-core Intel Pentium G6xx (Sandy Bridge)	756
  Dual-core Intel Pentium G6xxT (Sandy Bridge)	256
  Dual-core Intel Pentium G8xx (Sandy Bridge)	756

  and supported memory;

  Dual channel memory architecture
  Four DIMM DDR3 240-pin connectors

  Supports DIMM DDR3 modules

  PC3-10600 (1333 MHz)

  PC3-12800 (1600 MHz)

  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB and 4 GB DIMM

  Supports up to 4 GB on 32-bit systems

  Supports up to 16 GB on 64 - bit systems

  Frank

• Printer HP OJ6700 blocks desktop HP Pavilion HPE h8xt

  I called the service of Concierge of Costco today - once more.  This rep has changed my printer from USB port wireless.  He also checked my computer completely.  I am in place and running and the printer and the computer are now great in my opinion.  Of Costco Concierge service thank you!  YES, COSTCO!

  I bought the computer of the subject through Costco.com in June 2012.  I bought the printer object in a Costco store in August 2012.

  The printer prints sometimes and the computer turns off, or if the printer is turned on for a few minutes, the computer turns off without printing anything. I tried to fool it by printing and put off the printer. It does not either.

  I made many calls to Costco Concierge Services.  They have tried very hard to help me and me connected to HP twice.  HP said the printer is properly connected and functioning properly.

  Today, Costco asked me to perform a diagnostic check.  My computer has adopted smart check and DST Long in the verification of the System Diagnostics base HP.  I just put ink costs about $100 in the printer.  I think I've been very patient.  Can someone help me solve this problem until I throw the printer out the window as my return period has expired.           Thank you.

  Sorry for the confusion.  I do not understand how to let you know that my problem has been resolved.  So I clicked on edit and wrote that Costco has finally solved my problem in my original post.  You can delete this entire post.  Thank you.

• Device connect and disconnect sounds play when NOTHING is connected!

  Hello

  I am running Windows Vista x 32 on my Dell Inspiron 1525. The problem is that the device connect sound, immediately followed by the device disconnect sound, playing intermittently even when not a single device is connected. I have already extracted 1 million solutions online, and here's what we can exclude:

  • Still, she does when no devices are connected, so it is not a loose USB device.
  • Does it by chance; I can't predict when the sounds will play, and there is no evidence in the event viewer I can link to this problem.
  • My laptop does not have Bluetooth, so it's not just trying to pick up a network.
  • I've updated all the drivers I can think and who has been recommended by others. They are all to date. I have also each service pack installed.
  • It is a customized, sound scheme so that these sounds are ONLY related to the device plug or unplug, respectively. I even went through all the sounds in the profile just to make sure I didn't accidentally double up.

  The only other thing relevant I can offer is that I actually just sitting there waiting for the sounds to play while looking at the Device Manager. I got all the closed lists, and when sound plays, the "network adapters" list opens. Yet once, I checked to make sure that all of these drivers are up to date, but it still plays. Please help, I'm going crazy! Thank you in advance!

  BTW, even if I can put up a good show to know what I'm doing with a computer, I'm not that well versed in techno-parler, please dumb down your solutions. Thank you. :-)

  Hello

  That description makes it sound like the issue is a network adapter that is enabled - right click either the
  Interface NETWORK (wired) or peripheral card WiFi and turn OFF - which ever you use and see if the noise persists?
  I look in Device Manager is a good idea.

  Is it a PC or a laptop - card integrated or add-on/in? If a PC off ALL power and remove and reinstall
  all cards and cables on both ends (in fact, remove and replace - do not just tight). Not much, you can
  do this with a laptop, unless WiFi is external but for PC or laptop, you can turn off the edge
  WiFi (if she has that) and use an external device.

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• in case of power save/hibernation - theater sound system "device disconnected" repeatedly

  When my desktop PC goes into hibernation system sound for 'disconnect device' begins to play repeatedly.

  So I changed the setting of the sound to 'none '. Now, he's playing the system "connected audio device" several times.

  At first, I thought it had something to do with the addition of a second monitor.

  Then I disabled the 2nd monitor power when the use not. Is still healthy.

  So, I disconnected the VGA cable for 2nd monitor. Even the sound repeatedly.

  I could probably just change 'None' system for device disconnected but I want to fix the problem, not hide it.

  Hi David,

  Thank you for the update on the issue.

  If the problem persists, I you suggest to update the display drivers and then check the status of your question. You can see the steps in the article mentioned below to update the drivers.

  Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Download and install the drivers

  If steps above could not help try updating the drivers from the manufacturer's website. If you do not find drivers please give me the brand and model of your computer and we will try to find the proper drivers.

  Keep us updated on the status of your issue and we will be happy to help you.

  Kind regards

• Windows 8 times the device disconnect sound...

  Windows 8 times the device disconnect sound, my screen goes black, then both the windows the device plug his and my monitor turns on again. All my windows open and then re sizes to the top left of the screen. This happens randomly as I work with the computer. I have a Dell Vostro 270 connected via a VGA cable to a Samsung S22B300. I checked the event logs and Device Manager. Everything seems good. Please help if you know what this may be.

  Typically, this means two things: either the cable is loose, or the video driver broke down.  Usually if it's the driver, you would see that in the event where newspapers and maybe even a notification bubble near the clock when you see your desktop yet (something like "your display driver recovered").

  Do you see something like that?

  In addition, when the problem started to occur?

• Models of h8xt HP Pavilion HPE supported UEFI?

  There is an old request pertaining to this matter that was never definitively answered. Nobody knows, from this date, if these models are now using uefi? Thanks a lot for your help. take care-

  Here are the specifications and configurable options for the desktop HP Pavilion HPE h8 - 1360 t CTO.

  Here are the specs for the h8 - 1360t desktop computer HP card mother IPMMB-FM (Formosa).

  Here is the parameters of the BIOS for the card mother IPMMB-FM (Formosa), stating that "the Formosa motherboard uses BIOS FRIEND version 7 compatible with UEFI (Unified Extensible Firmware Interface)."

• Pavilion HPE model # H8 - 1260t: no sound

  Soundstopped work.  Through trouble shooting steps and even bought new speakers without success. I would be grateful if anyone has any ideas.  Thank you

  Hello @easylh,

  I understand that you are having problems with your audio files on your desktop computer HP Pavilion HPE h8 - 1260 t CTO running Windows 7. I'm providiing you with an HP support document: use of the Recovery Manager to restore the software and drivers (Windows 7), which will guide you through the process of re - install the original supplied with your computer drivers. As we know it worked they should solve your problem. If, however, they do not resolve your problem, I think that, since you already troubleshoot-made audio that we make a backup of your data files and perform a factory recovery on your computer.

  To save your personal information and ensure it is not lost, I would like you to look at and follow the steps in the HP Support document: backup of files (Windows 7), who will be your personal files are up to date.

  CAVEAT! If you want to keep the e-mails or bookmarks/favorites that you want to save them as I do not think they are saved in the backup HP process.

  Then, I would like to see again you and follow the steps in the HP Support document: performing a recovery of HP (Windows 7) system, which will allow you through to get your computer back to factory settings.

  IMPORTANT - your staff of files such as libraries, personalization settings, user accounts and desktop themes are permanently deleted. The settings on the computer are returned for values by default (as it was when it came from the factory). All applications and software installed on the computer when it came from the factory are relocated, and their settings are reset to the default values. In addition, software, applications, programs, and everything you have installed or saved on the computer are deleted permanently.

  If the steps above did not resolve your problem please contact our technical service at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. ' http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html '

  I want to thank you for display on the HP Forums. Have a great day!

• HP Pavilion HPE 1090 t: could someone help me please... Desktop HP Pavilion HPE h8-1090 t CTO - PSU replacement/compatibiliy

  I just bought a new power supply (Corsair CS650M) because someone has suggested that it would be a good replacement power supply for my HP model which is HP Pavilion HPE 1090 t.   I need to know if this Corsair works and is compatible with my system, because something is not working with him directly or I did something wrong.    This is my first install and when it comes to the ins and outs of power amplification entry & exit and amperages I get so confused about this stuff.   But I think I took all the pluged connection correctly, at least when I re-plugin my old PSU after the installation to fail, I had the PC working again, what made me give confidence that I did the Corsair install correctly.  But what happens is after the installation of the unit from Corsair and turn the system he clicked power off after about 10 seconds or more and then restarted after a few seconds, then stopped again and turns off after another 10 to 15 seconds, and nothing would come up on top of the screen no more.   The first time I did the research what PSU would be compatible, I was getting conflicting results with a few places on the net saying that the majority of the HP out there (excluding some models such as the slimline) could be replaced by different manufacturers and higher power PSU, while other places I looked different.   Even the person who recommended me this power supply said in his post that he installed a Corsair HX650 model in its HP PC, and it worked very well for him.  Now, after the failure of the installation for the next few days, I did a lot more research and when I went on the site of HP and looked up the specifications of the model my PC I noticed under the power supply section, he had a heading that says "must select one of the following options" (in fact most of the different sections shows that the title too) and then he showed only two options 460W and 600W.  Then he asked me if it's the only option I get with my model.  And then I looked at my model number HP on the HP PartSurfer and under the section of the PSU, it also registers only 460W and 600W.   So who is?   I have to stay with only these options two HP or can I get a power supply with a higher power a bit then 600W from a different manufacturer that is what I want.    If I can get something that is compatible other than the options listed HP please let me know, or if this Corsair should work someone please let me know.   I need to return it otherwise.    My specs are below.

  Thank you Aaron

  HP Pavilion HPE series
  Model No.: h8-1090 t CTO Desktop PC

  Name motherboard manufacturer: IPMTB-TK Pegatron HP/Compaq name: Truckee

  PIC of the motherboard link: http://support.hp.com/us-en/product/HP-Pavilion-HP E-h8-1000-Desktop-PC-series/5080764/model/5117795...

  Original HP installed: AMD Radeon HD 6570 (Bronco) graphics card 1 GB Model: 648533-001, SP # 659355-001

  Link video card PIC: http://www.ebay.com/itm/111761368505

  Nothing has been added/modified recently real system.  Last change was the beginning of the year 2015, which was a new 2 TB HDD and added however problem memory only started about 3 weeks ago.  The Interior has been cleaned (diffuse can)

  600W Μatx Estar v5 HF PSU (Petrus)

  Information about the current hardware out of the Power Supply Unit

  Switching power supply
  Model: DPS-600WB A
  Part number: 633186-001
  600W power MAX

  Output: DC output rating (new Corsair PSU)

  + 12Va = output DC 16A = + 3.5V / + 5v / + 12v /-12v / + 5vsb

  + 12Vb = 18 a Max Load = 25 a / 25 a / 51 / 0.8 a / 3a

  + 12Vc = 12 a Max comb = 130W / 612W / 9.6W / 15W

  + 12Vd = 10A power Total Power 650W

  + 16 5.08V = side of AC input

  + 3, 3V = 15 a AC input: 100V - 240V

  + 2 5.08Vsb = current: 10A - 5A

  -12V = 0.3 frequency: 47 Hz to 63 Hz =

  Entry:

  100-127V ~, 50-60 Hz, 10 a

  200 - 240 v ~, 50-60 Hz, 4A

  You are welcome.

  Although there is a limit to the amount of power that is needed to power your computer, it uses only the amount of power it takes to power the computer correctly.  The extra power is kept in reserve for the purposes of art.  Thus, you cannot really bad the computer with extra power or amperage.  You can sleep on this point.

  Indianaak wrote:
  

  Thank you very much for your quick response, I wasn't getting anyone to answer the previous post.

  If your saying these HP spare parts are not exclusive to the company?  Some connectors may be owners, but most are not.

  It should work then?  Yes.  I've recommended hundreds of the PSU in the years I've been helping on the Forums; in fact since about 2002.

  How about the input/output & amperages of note that I registered?  As I understand not all this jargon, I want to assure you that I have / using correct notation for my system.  I don't want to fry one of my compondents with to much amperage.   Well, either I did something wrong installing or this power supply is a dud then.  Read my explanation at the top of the page.

  As I said before I pretty sure I had all the right connections, what can you tell me if it sounds right for you.  I have pluged in both connectors wired on the motherboard which were the main ATX 24pin power connector and the EPS/ATX12V 8 pin which I shared and pluged a piece of the cable labeled 'CPU' in slot 4 pins on the montherboard labeled ATX CPU.  Regarding the other split 4 pads, I don't see anywhere, it could be pluged into the motherboard.  If two 4-pin connectors were even marked, it should be good.  However, you can try to plug the other 4 pin instead of this, just to make sure that the right pair is connected to the processor power.

  My AMD Radeon HD 6570 1 GB graphics card is the type that is fed through the MB so I didn't use any of the PCI-E cables 6-8 poles.  It is very good.

  And so the only thing I had left that I have pluged the compondents of Sata cables that was my Bluray burner, my 2 TB hard drive and my USB 3.0 card.  They are very frank.

  Yet once again being installation of hardware in my system let me ask hopefully not a stupid question, but when you connect compondents Sata cable, you must have the plug-in in a particular order of wiring compondent or how do you?  I don't check the specifications of your power supply, but I think most of them have a single 12V rail.  If this is the case, you don't have to connect them to any order.  If there are two rails, it is best to divide the power of each rail.

  On my old PSU, it has an extension cable SATA used to connent card USB 3.0 which is pretty tightly squeezed between graphics card and sound card, so I guess I could use the extension cable with the new PSU POWER Sata wiring without any compatibility also publishes, right?  This should be no problem I can think of at this point.

  Thanks again for your help, I'll probably will try and plug it once more and see if I can make it work.  If this does not work for now, I strongly suggest that you contact Technical Support of Corsair for help.  They are the experts on their products and grab any errors that we do.  It is very difficult to diagnose a problem by far.  When you have done with this project, you will no longer be the excuss you are a novice. You will have a lot of knowledge that you did not when you started.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Need drivers for my new HP Pavilion HPE ethernet

  Hello, I just bought a new HP Pavilion HPE desktop computer (3 days).  After that I got the first time I turned it on it only connected via the wireless network card.  I then did a clean install of windows 7 Ultimate edition (because I had it and it's better than home premium).  Well I can connect through the wireless card but want to connect with the ethernet.  The Device Manager shows SM Bus controller and Ethernet controller drivers are not installed.  I contacted HP support and they could not help, they said I have to do a full install HP operating system provided with the computer because they knew not where were pilots and no guarantee that would work.  The motherboard is made by IPMMB-FM.  I tried Google and found nothing.  I'm looking for help to find these drivers.  I'd appreciate any help that is offered.

  Possible breakthrough...

  While HP does not seem the W7 64-bit driver available (small oversite on their part), I think I have found a driver on the Atheros website.

  Go to the Portal client Atheros and select AR813x_AR815x_v2.0.14.15_WHQL or AR816x_v2.0.14.15_WHQL under the headings AR813x_AR815x or AR816x. They are in. RAR format, extract the driver by using WinRAR or similar!

  Frank

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion HPE h8-1111: Deffective WLAN Card

  I've had a few confusing issues with my internet connection for a few weeks now:

  My computer seems to detect wifi networks (they appear in the Network Manager), but fails to connect because of an unknown factor.

  Basic troubleshooting informed me that wifi wasn't the issue (other devices could connect to) and it turns out that my computer could sometimes reconnect by mmee after a few hours (weird right?)

  This time it does not resolve itself. I tried to update my WLAN card through my laptop adapter, so the drivers via a USB key. Nothing worked (maybe bad drivers?) I've tried a few)

  My network card is a mini Broadcom 802.11n using magnetic antennas of the card. (youd cloth found in a laptop essentially...) I have little or no knowledge more than I could translate from the web on this kind of hard\software. I am at a loss.

  [Also, I've seen a few threads recommending the driver intel update of software, but it needs a connection to work its magic...]

  Hi @arnaud34,
  
  Welcome to the Forums of HP Support! I understand that you have problems with your wireless connection and I'm happy to help you.

  Is that something WLAN adapter that you added or the original map?

  The Support page and drivers for your computer model: PC desktop HP Pavilion HPE h8-1111

  I would recommend that you try the following to see if you can get a stable connection. If at the end you still have nothing so it may be that the card is bad, and a replacement is necessary.

  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.