Pavilion n5495: how to resize my screen using win xp on a hp pavilion n5495?

Similar Questions

• I downloaded a game on the internet, and now my screen does not match my screen. I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  Hello val2000, welcome.

  These games is managed inside of Internet Explorer? If this isn't the case, then I suggest contacting the manufacturer of your computer for the latest pgrahics drivers. If installation of those who does not resolve the problem, then try to change your resolution to one of the following values (depending on the size of your screen):

  1024 x 768
  1280 x 800 (wide, common form for laptops)
  1280 x 1024
  1680 x 1050 (widescreen)

  To change your resolution:

  1. click on START
  2. click on "Control Panel."
  3. double click on "display".
  4. click on the tab "settings".
  5. change the resolution on your cursor tab and then click on 'Apply' at the bottom right

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to drag the screen using the trackball

  Hello

  I have several screens and I want to access each of them using the trackball.

  Please help me on how to drag each one screen using the trackball.

  the user can drag in the direction left or right.

  I want to effect such as BB AppWorld.

  Thank you

  Afonso

  Override navigationMovement to detect the roll.

• How to resize the screen display to use only half of the screen

  in order to write the information to a website in a MS word document, I want to put the site to display browser so the document MS word on the screen at the same time (each 1/2 of the screen (left and right view). How can I do this? I am technically challenged so tell me in the jargon of the primary school

  I can't test this on Windows 10, but...

  On Windows 7, if you hold down the keyboard Windows key, then press the right arrow key, the currently active window will change its form. By example, if the window is maximized it will change occupying half right side of the screen. Hold the Windows key and pressing the arrow key right to scroll to the right, left and restored/resizable. To maximize, use the up arrow key.

  I hope you can use this keyboard shortcut hidden to set each application to the half of the screen easily without having to manually extendable/retractable and move windows. And it's a cool thing that you can share with other people.

• How to resize an image using PIXELS to define the width and height?

  I need make my image a certain number of pixels wide and high.  When I resize image I can't change the area that shows the pixels of width and height, and when I drop down lists it does not give option pixels.  When I choose "points" and "Pica" they are obviously not other names for the pixels because the given number is not the number of pixels above.  I used to be able to do it EASILY in elements 2.0, my previous version of elements.  I am now using 8.0.

  In fact, I just realized that nothing that I in image resize will change the number of pixels at ALL in question.  Size and pixel per inch are locked permanently in relationship to each other.  I had to download a new version not long because my computer hard drive has failed, and I think they changed the things that work so not now, because I would have noticed it before now if it's that way when I downloaded originally from that.  I begin to fear that I'll have to kludge with the crop tool, even if the resizing of the image SHOULD be able to.

  Make sure resample is checked:

  

• How to clean the screen using the command in sql developer?

  It seems that the CLS, clean screen or own host both do not work.
  then how?
  Thank you
  
  Published by: Lyu KingT on April 28, 2010 11:07

  Select "Rambeau" of double;
  Claire;
  Select "deleted raghu" double;

  It clarifies the hope!

  -Rambeau

• How to resize my screen? I do not see the menu f or at the bottom of web pages unless I have 'restore down' for a smaller size of the window.

  I do not see the menu f or at the bottom of web pages unless I have 'restore down' for a smaller size of the window.

  The problem is when you maximize the window - it is even bigger than the available surface? Or the problem is that normal windows are always too big and have to manually resize?

• PAVILION 22xi: COME PULIRE LO DEL PAVILION 22xi SCREEN / HOW TO CLEAN the SCREEN OF THE 22xi of FLAG?

  COME PULIRE LO DEL PAVILION 22xi SCREEN?

  Inoltre:
  Come rimuovere eventual aloni esistenti da previous pulizie?

  HOW TO CLEAN the SCREEN OF THE 22xi of FLAG?
  In addition:
  How to manually remove existing halos of previous cleanings?

  Hi there @antonio55,

  That the Forums are with you!  I understand that you are looking for advice on how to clean your screen.  I'm happy to give you a helping hand with this.

  Please see: HP monitors - Safety and Maintenance Guidelines, under the heading "Cleaning the monitor" for details of cleaning, but be sure to read both safety related information.  Depending on what you mean by "halos" try following the instructions for the materials to be used. If you have in the past used something on the list of cleaning products do not turn out to serve, you may have already damaged a part of the screen.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• How to take a screenshot using Windows 7 screen

  I'm using Windows 7 Home Edition. I want to take a screenshot of the homepage of MSN in 31ish Firefox and Internet Explore 11ish to show the difference that I see. MSN.com Firefox display is so bad on my PC that I had to go home pages at http://www.twcc.com/ . I prefer to use MSN.com as I always until they came out with their "New and improved" MSN.com.

  So, if someone can tell me how to take a screenshot using Firefox 31ish MSN.com Web page, I would appreciate the help. Then I'll go to forums on how to do the same thing with the Internet Explorer browser. Then, I'll post the two shots in the Mozilla's Support forums to see if I can find how do Firefox works better for me. Thank you.

  The current versions of Firefox have a built-in feature to take a screenshot as the one of the commands on the toolbar Developer (SHIFT + F2; Firefox 3-bar menu button > developer or tools > Web Developer).

  • https://developer.Mozilla.org/Tools/GCLI

  You can use it if you need only a screenshot sometimes because you must use a command line and can't click a button or use the context menu.

  • A quick way to save a screenshot is to press the 's', and then press the tab key to accept the suggestion of AutoComplete screenshot.
  • You can press the F1 key for context-sensitive help with suggestions where you can select an entry with cursor key and press Tab to copy the entry in the command line
  • You can type a space and two hyphens (-) to see the list of command options and use the Tab key to copy the selected highlighted (for example, fullpage or Clipboard) in the command line entry.

  Note that some commands have their own options and you can type two hyphens at once to see additional options.

  • The default file name is "Screen Shot yyyy-mm-dd to HH.MM.SS.png" in the download directory.
  • For more help, use this command: help the screenshot

• How to add several presets in a reactive mode design without having to resize the screen every time

  I want to be able to add several screen size presets with the ability to view sensitive design but do not want to resize the screen and add each individually through the predefined custom function.

  Have you seen some messages on the internet (http://g-liu.com/blog/2013/08/firefox-rdm-presets/) who say it can be done, but could not find where the config is required to worm 26.0?

  Hello

  Work now how to do this. You first create an entry called "devtools.responsive.UI.presets" in the configuration file, and then add in the predefined string:

  If the steps are:

  (1) open a new tab in Firefox or window and enter about: config

  (2) (if a warning message appears, click OK.)

  (3) create a new entry devtools.responsive.UI.presets - right click and select 'new', then 'string' - under enter the preference name of the type "devtools.responsive.UI.presets" and then click OK. When the box of the input string appears simply add the following shows

  [{"key": "CGA: 320 x 200", "width": 320, "height": 200}, {"key": "QVGA: 320 x 240", "width": 320, "height": 240}, {"key": "CIF: 352 x 288", "width": 352, "height": 288}, {"key": "SIF: 384 x 288", "width": 384, "height": 288}, {"key": "HVGA: 480 x 320", "width": 480, "height": 320}, {"key": "(NTSC) VGA: 640 x 480", "width": 640, "height": 480}, {"key": "PAL: 768 x 576", "width": 768, "height": 576}, {"key": "WVGA: 800 x 480", "width": 800, "height": 480}, {"key": "SVGA: 800 x 600", "width"}] {: 800, "height": 600}, {"key": "WVGA (NTSC): 854 x 480", "width": 854, "height": 480}, {"key": "PAL: 1024 x 576", "width": 1024, "height": 576}, {"key": "WSVGA", "width": 1024, "height": 600}, {"key": "XGA: 1024 x 768", "width": 1024, "height": 768}, {"key": "1152 x 768", "width": 1152, "height": 768}, {"key": "XGA: 1152 x 864", "width": 1152, "height": 864}, {"key": "WXGA: 1280 x 600", "width": 1280, "height": 600}, {"key": "HD 720: 1280 x 720", "width": 1280, "height": 720}, {"key": "WXGA} {: 1280 x 768 ","width": 1280,"height": 768}, {"key":" WXGA: 1280 x 800 ","width": 1280,"height": 800}, {"key":" SXGA: 1280 x 1024 ","width": 1280,"height": 1024}, {"key":" 980 x 1280 ","width": 980,"height": 1280}, {"key":" Microsoft Surface RT: 320 x 240 ","width": 1366,"height": 768}, {"key":" 1400 x 900 ","width": 1400,"height": 900}, {"key":" 1400 x 960 ","width": 1400,"height": 960}, {"key":" SXGA +: 1400 x 1050 ","width": 1400,"height": 1050}, {"key":" 1400 x 1080 ","width": 1400,"height": 1080}, {"key":"1600 x 900"} {, "width": 1600, "height": 900}, {"key": "UXGA: 1600 x 1200", "width": 1600, "height": 1200}, {"key": "WSXGA +: 1680 x 1050", "width": 1680, "height": 1050}, {"key": "1920 x 900", "width": 1920, "height": 900}, {"key": "HD 1080: 1920 x 1080", "width": 1920, "height": 1080}, {"key": "WUXGA: 1920 x 1200", "width": 1920, "height": 1200}, {"key": "2K: 2048 x 1080", "width": 2048, "height": 1080}, {"key": "QXGA: 2048 x 1536", "width": 2048, "height": 1536}, {"key": "WQHD: 2560 x 1440", "width": 2560, "height": 1440}, {"key" {: "WQXGA: 2560 x 1600", "width": 2560, 'height': 1600}, {'key': "QSXGA: 2560 x 2048", "width": 2560, 'height': 2048 '}, {'key': "2160 p: 3840 x 2160", "width": 3840, 'height': 2160 '}, {'key': "4 k: 4096 x 2160", "width": 4096, 'height': 2160 '}, {'key': "4320 p: 7680 x 4320", "width": 7680, 'height': 4320 "}, {'key':" 8 k: 8192 x 4608 ","width": 8192, 'height': 4608 '}, {'key':" 8640 p: 15360 x 8340 ""} [{, "width": 15360, 'height': 8640}]

  then click OK

  All new presets should now be sensitive design mode.

  Worked for me!

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.

• I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.

  I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there.    How can I automatically have the black screen disappear.

  Hello

  Use it as the last command in the file beats.

  OUTPUT

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Screen display: in some way, I changed the size of everything on my screen using the F keys. How can I change this back?

  Somehow, I changed the size of everything on my screen using the F keys.  How can I change this back?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• How to recover a selection of the screen using the tool of cross hatching? S worked on the old pc to control...

  I used to be able to select a piece of the screen using Ctrl-S, how I got a cross-hatch tool (it looks like the Selection tool in Photoshop)

  Please help - lost without this feature!

  Maybe your version of Vista has the Snipping Tool...

  Windows Vista - activate the Vista Snipping Tool
  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Vista tutorial - How to use the tool captures of Vista
  http://www.Vistax64.com/tutorials/148532-how-use-Snipping-Tool-Vista.html

• How to get a handle to the window to screen using just group id and the id of the window?

  Hello

  We are trying to develop a video application, and we use ForeignWindowControl to display the video on the screen.

  We have those ForeignWindowControl declared and defined in a QML file that appears as needed.

  Using the CameraAPI, we are able to get local video displayed correctly on the local video ForiegnWindowControl. For this we have just the window group id and the id of the window api camera and it automatically configures the window newly created by the camera to the position API and the size defined in the QML file.

  However, this is isn't the case with the video remotely. Since there is no method/function similar to the createViewFinder of the camera api, we need to create a new window of ourselves that goes under the Group shared by the ForeignWindowControl remotely, using screen_create_window_type and set all the required parameters.

  To view the video, hard-code manually the position and size of the newly created window so that it corresponds to the position and the size of ForeignWindowControl remote in QML file and is displayed correctly.

  My question is how to find the ForeignWindowControl using just the group id and the id of the window? the way in which the cameraAPi done in-house?

  Any help would be appreciated.

  Thank you.

  There are 3 ways to associate a window with a ForeignWindowControl.

  1 tell the ForeignWindowControl to expect a window with a given windowId.  Then after that libscreen allows you to create your window with the same windowId, use screen_join_window_group() to adhere to the same group that uses the FWC.  The FWC should automatically capture this event and associate the window itself.  This is how the camera it.

  2. call the bindToWindow() of the ForeignWindowControl method to associate the FWC a particular windowId/groupId.  Similar to the #1, but doesn't seem more useful if you create the FWC after the window of the screen has been created.

  3. call the setWindowHandle() of the ForeignWindowControl method.  Similar to the #2, but instead of using windowId/groupId, you spend just the actual handle.

  See the FWC docs:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__foreignwindowcontrol.html

  If you have created the window, you can use one of the 3 approaches.  If the window has been created in a different process (eg. mm-engine rendering, or photo-service device), then generally #1 is the approach you would use.

  See you soon,.

  Sean