PB recovery with Vista Recovery DVD on Lenovo 3000 K Destop
Hi, after a bug, I recover the series of desktop Lenovo 3000 K with recovery DVDs. First step is ok: Vista is transferred to the hard drive. No error message. At the end of recovery, restarting the computer but stop with the slider on the black screen. The cursor down two line and stop. Do not start Vista.
This office, purchased in March 2008.
Thanks for your help.
Tags: Lenovo Desktops
Similar Questions
-
Region with Vista Home DVD code problem
I have a sony vaio cr290 bought in the United States. I would like to change the dvd region code HT now moved it to the India. its asks me to insert the media to change the region code, I hv tried 4 left. Help, please. I have no Vista support since the laptop is with Vista Home installed. The DVD recorder using pioneer dvd - rw dvr - k17 ata device.
Hello
Check with the system manufacturer and the manufacturer of the drive because there may be limits in place
to avoid changes.Have you checked control panel - Device Manager - CD/DVD - double click on the drive.
DVD region? Be sure to be logged on as ADMINISTRATORHave you tried to connect as ADMINISTRATOR mode without failure?
You have any CD/DVD programs running at startup that might be locking the
by car?How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAutoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx--------------------------------
DVD region information
http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threadsDVD region code
http://en.Wikipedia.org/wiki/DVD_region_codeYou can buy devices that claim to be region free and software that claims to be able to
other regions to read even if I have no experience with those.Region Free DVD Player Information
http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.htmlRegion Free & Code free DVD player information
http://www.dvdbuyingguide.com/codefreedvd/bigfaq.htmlForums - a lot of expert real help
http://Club.myce.com/I hope this helps.
-
Satellite A100-049 with Vista-->; Win DVD won't play?
Just bought the above. Everything seems great so far (but it was only 2 days) apart from when I try to play a region 2 dvd in the drive. I select WinDVD 8 and it offers the possibility to open from the folder by car. I select 'f' is the disk and the disk rotates upward. No image or its property. The initial screen is right on. (They will play in library car seems fine)
Cannot see everything change and the drive is set to region 2. Research in the "getting started", he says that to the final version of vista, it "may" be necessary to download a patch, but I can't find one.
Any help appreciated
Hello
Are you trying to play original DVD?
If your DVD player was attached to another region it is possible that you will not be able to play these DVDs.You can change the region code in the properties of the drive. But be careful; You can change it only 4 or 5 times (don't remember)
But if you can play movies with MCE so I think you need to change the drive region code.Have you tried to install some codex? Otherwise, try it!
-
filter of device drivers are corrupt; class filter drivers are corrupt. I've already replaced the hardware player with SPARE HP 448005-001. With auto drive disabled, detection of new drivers is not past. This isn't a hardware problem. Computer, registry and Device Manager do not see this disc/device. Mats_run.dvd and Microsoftfixit50123 were used.
Hello
Drive or cable might have a problem.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Problem with Internet wireless connection in Lenovo 3000 Y410
-
Reinstall Vista with recovery DVDs
Hello
I don't have much experience with things... But here's my story:
My sister (Satellite L300 10 q) laptop was running very slow after 2 years of use. Then she tried to reinstall everything to factory settings...
So we did a recovery DVDs with the Toshiba Recovery DVD tool, we started the computer with the disk in it... but nothing happened...Someone said to start and go to start settings and select CD/DVD to start and so we did.
After that a progress of the installation came...
We had to choose a language and click Next and the system warned us that everything would be removed...
This is no problem, because it has saved his important files on an external hard drive.After this progress of the entire installation, systems tried restarting, a blue screen came and if it restarts again and again... If we chose not to scan, it kept going on blue screen and reboot...
We are really powerless...
What has gone wrong? And what can we do about it?Thank you
Very interesting, I must say.
Thanks for sharing this information with us! :)
-
How recove my windows 7 with recovery DVDs
I bought a HP with windows 7. The hard drive crash so I bought a nthew one and could not recover my wiindows 7. By pure frustration I load windows Vista on the laptop and have since ordered and received the recovery dvd but I am unable to do anything with it. When I insert the DVD, nothing happens
You must boot from the DVD. Put in the optical drive, then shut down the laptop. Immediately after it turn on/off, press the ESC key. In the menu press F9 Boot options. Use the arrow key to move down and the highlight / select the CD/DVD drive, the water entry.
-
Cannot use recovery DVD with my Satellite Pro A300D
When I arrived at my laptop set up the way I like it, and I created a recovery disk which took the 2 DVD s.
Then Vista started to slow down a lot so I decided to use the disc and everything started to go well then he asked for two drive and it came with an error message saying that the file was missing to complete the Setup program couldn't t.So now I can t get in the menu to restore it to the State when I had and the disks that I don t work.
Any help is appreciated.Thanks in advance
Hello buddy
It is badly located now. Please try to do it once more.
If the same thing happen there is nothing you can do. I'm not an expert for this kind of thing, but I noticed the image recovery recovery DVD will be copied to the HARD second partition disk) first and then the installation of recovery will go from there.If the adaptation procedure is not done on the recovery of end procedure cannot be started.
Sorry buddy. In my opinion, you can try to contact the nearest authorized maintainer and explain the situation. Take the DVD created as evidence and maybe they will order new media for free.Good luck!
-
I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery
I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery
How much it costs
I need to perform a recovery for ssd only
I need direct link for that
Nice day.
He was never a way I know of to download games Windows OEM Lenovo recovery disks. That the process is managed by Service, you'll need to contact them directly (see info below). If I understand correctly, they will confirm your OS by checking the serial number of your machine.
I hope this helps.
Kind regards.
-
Problems with Vista for a Fujitsu Siemens Amilo Pi 2512 recovery disks.
I have a Fujitsu Siemens Amilo Pi 2512. I need to re install Vista using recovery disks that I created. However when I get to step 3, he tells me all the data will be deleted one get a "Script error 794: (Null)"message. " The laptop, then restarts. Can someone help? Please, I beg you!
Some manufacturers have more available Vista recovery disks.
As it happened with Fujitsu, you need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
See you soon.
-
Will Vista Recovery DVD to install on new hard drive on my Presario
You need to install Vista from the recovery DVDs I created when I bought my laptop Presario 3 years on a new hard drive. The original replaced HARD disk needs and I was going to buy the same exact model.
Someone at - he did this with success, or will there be problems? Thank you
Hello
You should be fine with the MHW2160BH.
Hope everything goes well.
Best wishes
DP - K
-
Hi all
I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?
Evan
Hello
If you have problems with the process of recovery of manufacturers, contact the manufacturer
It's their recovery process not microsofts
-
Hard Drive crashed with Vista on it - could not return it with ACER recovery disks
Got a new hard drive with no operating system on it and the recovery discs ACER did not work. I want to upgrade to Windows 7, but has no system of Vista on the ACER computer
* original title - Hard Drive has crashed with Vista above - could not return it with ACER recovery disks. What to do next... upgrade to Windows 7 *.
Got a new hard drive with no operating system on it and the recovery discs ACER did not work. I want to upgrade to Windows 7, but has no system of Vista on the ACER computer
Hey Tim-Blair
If you have problems with the acer acer recovery disks give a call
you would normally replace your boot order to the shape, the insertion of dvd disc the first acer recovery disk and restart from the recovery of the boot process
http://www.Acer.com/worldwide/support/
Walter, the time zone traveller
-
HP pavilion n201se 15: how to partition my hard drive with recovery DVDs
Hello
Please I now have my recovery DVD to my Hp laptop and I had already delete the partition of recovery on the laptop, so now I want to do the new facility with my DVD recovery and the partition of the HARD drive in two, but it seems that I do not understand everything remove options during installation. I need the support of masters.
Thanks and greetings
Richperry.Recovery DVD does not give an option to partition the hard drive. You can create a new partition using disk management in Windows.
-
Re: Error Message with Recovery DVD creator
A few days ago, I bought a new laptop Toshiba L650 12Z. I wanted to make the recovery dvd.
I throw the creator of DVD recovery and after awhile, it gives the error "the file cannot be read. (E:/sources / boot.wim Error Code: 020150-20-00000000) ' and the process will stop. I tried several times, with the necessary waste of DVD.
No one knows what to do in this situation.
Thank you
I recommend you try a media of high quality like Verbatim or Tdk dvd. You see, creator DVD doesn't accept poor quality, media
Maybe you are looking for
-
How do I completely disable the hibernation on the Satellite Pro A300
Hello! I know the questions with Satellite Pros do not wake up from hibernation, and I read the answers, which recommend an update of the BIOS and OS. My BIOS is the latest version, but the OS is XP and should stay that way - I bought the laptop, whi
-
the computer not lee el device pues lo muestra como retribution y no encuentra los contraladores este mismo
-
How to get a mccibrowser my computer
whenever I turn on my computer, I have a blank screen saying that your computer is updated waiting for some types of streams of I don't know what to do it says your MCCIBROWSER does not WORK
-
How to restore my backup on external hard drive system
I did a windows image backup of my Vista system on a Seagate external hard drive. Now I want to restore my system from the backup, but restore in control panel procedures does not recognize the files. Version of Vista professional, Service Pack 2. I
-
Create custom workflows in virtual machine
HelloI use a native workflow 'Create custom virtual machine', but it does not deploy a machine of the ntemplate.He built a raw with personalised VM. Some other workflow to deploy the VM from the model but without customization.Is it possible to inclu