PB to download the different domain xml file

Similar Questions

• I am trying to open a file and make me notice that the required index.xml file is missing. Is it possible to access the file? I don't know why this happened.

  I am trying to open a file in Pages 09 and am getting notice has the required index.xml file is missing. Is it possible for me to access the file? I don't know why this happened.

  You open a file with Pages ' 09 Pages 5.x.

  You need to right-click on the file and open it with Pages 5.x (the one with the orange document icon).

  Peter

• How to integrate the dynamic SQL generated in the data definition XML file?

  Hi all

  I have it here is the XML file that is attached to the definition of data model RTF as below. Also, I have a function that will return to create a dynamic query as shown below.

  <?xml version="1.0" encoding="UTF-8"?> 
  <dataTemplate name="XYZ" description="iExpenses Report" Version="1.0"> 
  <dataQuery> 
  <sqlStatement name="Q2"> 
  <![CDATA[
  

  Hi guys,.

  I was able to solve above the requirement. It was not possible to create only from SQL dynamically. Instead, I created a procedure that would create & update (attached to the data definition) XML file dynamically for each race.

  Kind regards

  Patricia K.

• Dreamweaver had problems during the construction of the current menus.xml file menus

  So, after having trouble with my Photoshop scratch disk, I had to do an archive and install of my OS 10.6.1 and then reinstall the suite Adobe. then I had to run the repair of the license utility (http://www.adobe.com/support/contact/licensing.html).

  Now everything works but Dreamweaver, which is throwing the following error message:

  "Dreamweaver had problems during the construction of the current menus.xml file menus.

  If please remove the current menus.xml file and rename menus.bak menus.xml.

  I tried. menus.bak is a directory, not a file. Even renaming the directory did not work.

  I saw this http://forums.Adobe.com/message/2188511#2188511

  but I do not have a directory/FlashPlayerTrust /, nor do I see what that has to do with Dreamweaver.

  I could not find a corresponding solution to this http://forums.Adobe.com/message/862339#862339 for Mac OS.

  Ce http://forums.Adobe.com/message/3396334#3396334 did not help, either.

  Anyone have any ideas?

  Thank you!

  I got this same error this morning when I tried to open Dreamweaver CS5 (any type of document have been found in the...). I'm on a PC. There was very little posts about it so I thought I'd post what worked for me. It must have been a day or something by Akamai.

  I went to C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes and open MMDocumentTypes.xml in Notepad ++. There were about 100 lines of NULL in the configuration of Akamai, so I deleted all the information between the   for Akamai and DW fine after that. Don't forget to backup before overwriting!

• How do I download/save a local XML file

  Hello, I'm developing a game of amateur video on Flex 4, which will be downloadable and execution in the local file system (such as "C:/Games/myGame/myGame.html"). I try to save and load the registry of players in an XML file, also locally (as 'C:/Games/myGame/records.xml).

  So far, I was abled to load the file like this:

  var loader: URLLoader = new URLLoader();

  var request: URLRequest = new URLRequest ("records.xml");

  var recordsXml: XML;

  try {}

  _ loader.load (request);

  _ recordsXml = new XML (loader.data);

  }

  catch (...)

  After that, I can then extracts the data perfectly recordsXml. However, I can't figure out what code to use to save changed data. I tried this:

  var request: URLRequest = new URLRequest ("records.xml");

  Request.Data = recordsXml.toXMLString ();

  request.contentType = "text/xml";

  Request.Method = URLRequestMethod.POST;

  loader.dataFormat = URLLoaderDataFormat.TEXT;

  try {}

  _ loader.load (request);

  }

  catch (...)

  The code runs without error, but the file is not updated. I tried to record data on a second, empy file records2.xml, but it does not work either.

  What should I do? Thank you!

  For web applications, you can use the FileReference class. This allows you to

  Open a dialog box to the user to load an external file, or save it to their

  computer. Here are more details:

  http://help.Adobe.com/en_US/AS3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7cf8.html

  Please note that this only works if the user triggers the action and

  through the file dialog box. You can not save or load files without their

  knowledge from a web application. A desktop AIR app is different and may

  load/save files in the background.

  iBrent

• Location of the icon library XML file?

  My installed version of LabVIEW 2015, full, SP1, does not glyphs/icons available, so I am trying to download the required files.  I downloaded the zip file with success, but when I try to download the XML file, the link takes me to a page containing the raw code.  When I copy, paste and save this code in an XML file, I get an error when I try to sync manually.  Automatic synchronization will fail also.

  Here's the location of the xml file that does not work after being cut and pasted: http://www.ni.com/swf/iconlib/icons_filtered.xml

  Anyone know where I can find an XML file that will work?

  Of course, if there is a better way to get my glyphs work, let me know.

  Thank you.

  So a number of things might happen.  This computer has multiple users?  Glyphs are installed for the user who installed LabVIEW, but nobody else.  If you don't like this design, you should go vote for this idea.

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/shared-icon-editor-glyphs-directory/Idi-p/3253351

  With respect to the glyph broken, updated tool, I have no idea.  The stupid thing just never worked for me.  OR even a standalone program once for the update of glyphs and it doesn't seem to work or else the other.  To help with this, I have attached my glyphs and you can simply copy and past in your \LabVIEW Data\Glphys folder.  In addition to those that come with LabVIEW 2015 I also added a Hooovahh folder with many a library open icons and a few I did.  After copying restart them LabVIEW and open the icon editor, then wait a few seconds while it lists the directory of icons.

  Given the time, I bet that someone could make a tool that synchronizes correctly, download and install the icons correctly, especially since I think that most of the icon editor is open source.

• export data from the table in xml files

  Hello
  
  This thread to get your opinion on how export data tables in a file xml containing the data and another (xsd) that contains a structure of the table.
  For example, I have a datamart with 3 dimensions and a fact table. The idea is to have an xml file with data from the fact table, a file xsd with the structure of the fact table, an xml file that contains the data of the 3 dimensions and an xsd file that contains the definition of all the 3 dimensions. So a xml file fact table, a single file xml combining all of the dimension, the fact table in the file a xsd and an xsd file combining all of the dimension.
  
  I never have an idea on how to do it, but I would like to have for your advise on how you would.
  
  Thank you in advance.

  You are more or less in the same situation as me, I guess, about the "ORA-01426 digital infinity. I tried to export through UTL_FILE, content of the relational table with 998 columns. You get very quickly in this case in these ORA-errors, even if you work with solutions CLOB, while trying to concatinate the column into a CSV string data. Oracle has the nasty habbit in some of its packages / code to "assume" intelligent solutions and converts data types implicitly temporarily while trying to concatinate these data in the column to 1 string.

  The second part in the Kingdom of PL/SQL, it is he's trying to put everything in a buffer, which has a maximum of 65 k or 32 k, so break things up. In the end I just solved it via see all as a BLOB and writing to file as such. I'm guessing that the ORA-error is related to these problems of conversion/datatype buffer / implicit in the official packages of Oracle DBMS.

  Fun here is that this table 998 column came from XML source (aka "how SOA can make things very complicated and non-performing"). I have now 2 different solutions 'write data to CSV' in my packages, I use this situation to 998 column (but no idea if ever I get this performance, for example, using table collections in this scenario will explode the PGA in this case). The only solution that would work in my case is a better physical design of the environment, but currently I wonder not, engaged, as an architect so do not have a position to impose it.

  -- ---------------------------------------------------------------------------
  -- PROCEDURE CREATE_LARGE_CSV
  -- ---------------------------------------------------------------------------
  PROCEDURE create_large_csv(
      p_sql         IN VARCHAR2 ,
      p_dir         IN VARCHAR2 ,
      p_header_file IN VARCHAR2 ,
      p_gen_header  IN BOOLEAN := FALSE,
      p_prefix      IN VARCHAR2 := NULL,
      p_delimiter   IN VARCHAR2 DEFAULT '|',
      p_dateformat  IN VARCHAR2 DEFAULT 'YYYYMMDD',
      p_data_file   IN VARCHAR2 := NULL,
      p_utl_wra     IN VARCHAR2 := 'wb')
  IS
    v_finaltxt CLOB;
    v_v_val VARCHAR2(4000);
    v_n_val NUMBER;
    v_d_val DATE;
    v_ret   NUMBER;
    c       NUMBER;
    d       NUMBER;
    col_cnt INTEGER;
    f       BOOLEAN;
    rec_tab DBMS_SQL.DESC_TAB;
    col_num NUMBER;
    v_filehandle UTL_FILE.FILE_TYPE;
    v_samefile BOOLEAN      := (NVL(p_data_file,p_header_file) = p_header_file);
    v_CRLF raw(2)           := HEXTORAW('0D0A');
    v_chunksize pls_integer := 8191 - UTL_RAW.LENGTH( v_CRLF );
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    --
    FOR j IN 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
      WHEN 1 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      WHEN 2 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      END CASE;
    END LOOP;
    -- --------------------------------------
    -- This part outputs the HEADER if needed
    -- --------------------------------------
    v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_header_file,p_utl_wra,32767);
    --
    IF p_gen_header = TRUE THEN
      FOR j        IN 1..col_cnt
      LOOP
        v_finaltxt := ltrim(v_finaltxt||p_delimiter||lower(rec_tab(j).col_name),p_delimiter);
      END LOOP;
      --
      -- Adding prefix if needed
      IF p_prefix IS NULL THEN
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      ELSE
        v_finaltxt := 'p_prefix'||p_delimiter||v_finaltxt;
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      END IF;
      --
      -- Creating creating seperate header file if requested
      IF NOT v_samefile THEN
        UTL_FILE.FCLOSE(v_filehandle);
      END IF;
    END IF;
    -- --------------------------------------
    -- This part outputs the DATA to file
    -- --------------------------------------
    IF NOT v_samefile THEN
      v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_data_file,p_utl_wra,32767);
    END IF;
    --
    d := DBMS_SQL.EXECUTE(c);
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT
    WHEN v_ret    = 0;
      v_finaltxt := NULL;
      FOR j      IN 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
        WHEN 1 THEN
          -- VARCHAR2
          DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        WHEN 2 THEN
          -- NUMBER
          DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_n_val);
        WHEN 12 THEN
          -- DATE
          DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_d_val,p_dateformat);
        ELSE
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        END CASE;
      END LOOP;
      --
      v_finaltxt               := p_prefix || v_finaltxt;
      IF SUBSTR(v_finaltxt,1,1) = p_delimiter THEN
        v_finaltxt             := SUBSTR(v_finaltxt,2);
      END IF;
      --
      FOR i IN 1 .. ceil( LENGTH( v_finaltxt ) / v_chunksize )
      LOOP
        UTL_FILE.PUT_RAW( v_filehandle, utl_raw.cast_to_raw( SUBSTR( v_finaltxt, ( i - 1 ) * v_chunksize + 1, v_chunksize ) ), TRUE );
      END LOOP;
      UTL_FILE.PUT_RAW( v_filehandle, v_CRLF );
      --
    END LOOP;
    UTL_FILE.FCLOSE(v_filehandle);
    DBMS_SQL.CLOSE_CURSOR(c);
  END create_large_csv;
  

• problem opening document pages. Get the message: the requested index.xml file is missing.

  I can't open the document 'Pages' and get "the index.xml file required is missing."

  You should post the related issues of Pages in the Pages for Mac community support.

  You try to open a document v5 Pages in Pages ' 08 or 09 ' which does not support the format of document Pages v5. Exit your application Pages ' 08 or 09 ' and then double-click the document even have it open in Pages v5.

  When you are in Pages ' 08, ' 09, or same v5, the red light on the title bar of the document just close the current document and fails to complete Pages.

• I'm not able to open my documents pages. I get the message: the requested index.xml file is missing.  I wonder if it is because I have updates 10.11.5

  I have an iMac (20-inch, mid 2007) processor 2 GHz Intel Core 2 Duo 3 GB 667 MHz DDR2 SDRAM memory and recently updated to el capitan 10.11.5.  I have Pages ' 09, and I can't open my documents pages and get the message:

  The index.xml file required is missing.

  I now see that it says return to default pages 5.6.2.

  I can open them as 5.6.2 then save tehm in pages ' 09?

  Can someone help me with easy tips?

  Only the Pages ' 09 or old documents contain internal index.xml file. When you try to open a document in Pages ' 09 Pages v5, you get this dialog on the missing index.xml. The key is to stop Pages ' 09 and then double click on the document to open it in v5.6.2 Pages.

  Pages ' 09 will not leave by simply clicking on the red light on the title bar of the document. As long as the Pages ' 09 continues to run, it will intercept all attempts to open any document Pages, including incompatible versions of the v5 Pages.

  This has nothing to do with OS X 10.11.5. He has been a user focused on the issue since October 2013.

• I have a Dell 946 AIO printer and downloaded the player to a file on my HP Pavilion laptop. Now... What should do?

  I downloaded the driver, but he went in a Dell folder on the C drive and I have no idea how to go read/install the driver in the right place to allow the computer communicate with the printer to the computer.   Dell 946 AIO printer is not on the list provided by the automatic installation.

  DenaRhey,

  Try to watch...

  Dell/drivers/C: /.

  Pilots should be there. Double-click the drivers and it should try to install. If not, look for the configuration file in the unzipped folder.

  Rick

• Impossible to download the App Builder .ipa files

  Hello

  When I want to download the development of the App Builder .ipa file, I get this error message (see screenshot):

  in English: "cannot sign the application, verify that the certificates are valid and try again...". »

  My certificates are quite valid, I don't have any message of error at each step, I have two certificates ready p12, explicit AppID and 2 mobileprovision file.

  I've renamed ony with all lower and uppercase, without space, put items to update several times... but there is always this error message.

  I am Member creative cloud, so I also tried a disconnect, leave Indesign, and then opening again, connect via Folio Builder, then choose "create an application" (with the App closed Builder). Did not work.

  What should I do? Help, please.

  

  Solution found!

  I checked (in the folder of the application generated in the Library/Preferences/com.adobe.ViewerBuilder/Local store and realized that file .folio names still used the old article names (= with characters prohibited such as spaces and e).)

  I've renamed them in InDesign (as explained here http://helpx.adobe.com/digital-publishing-suite/kb/download-sign-failed.html ), but apparently the update of the name is not taken into account on the names of the files .folio.

  -Online the only solution is to REMOVE each article (that forbade the characters), then create it again with a good name (no space, without the e). And then left with the app creation process. In this way, the .folio files are correct and I could download the .ipa file.

• Where can I download the plugin for .psdx files

  I have photoshop cs5.1 extended on a touch of photoshop and office win7 on an android tablet.  I read that there is a plugin called touch app plugins and I headed to the adobe download page, but this plugin does not seem to exist there. Where can I download the plugin to open .psdx files in photoshop?

  Thanks, that worked

• parse error the server clients.xml file

  Hello

  I just installed ESX4i on a stand-alone server and I get error indicating:

  Parse error the server "servername" clients.xml file Connection will continue, contact systems administrator

  Clicking OK is followed

  "The type initializer for ' VirtualInfrastructure.Utils.http.webrequestproxy ' threw an exception

  No idea what may be the cause. I installed the vSphere client.

  See you soon

  Please consider my response as 'useful' or 'proper' marking

  If you installed on Windows 7 search the forums a good thead on the same error and a workaround there.

• Download the pdf or jpg file and save it on the device for consultation offline

  Hello

  Publication of an AIR for iOS app via Flash CS5.5, anyone know if it is possible to download a pdf or jpg file and save it on the device for consultation offline?

  If so, could you give me some advice on the relevant categories?

  Thank you

  Mark

  Save the content of the loader in byte array, and then send this byte array to FileStream

  Something like:

  mcLoader = new URLLoader();

  mcLoader.dataFormat = URLLoaderDataFormat.BINARY;

  var req:URLRequest = new URLRequest (file);

  mcLoader.addEventListener (Event.COMPLETE, contentLoaded);

  mcLoader.load (req);

  private void contentLoaded(e:Event):void {}

  var dataContent:ByteArray = new ByteArray();

  dataContent = e.target.data;

  var fileName:String = "mylocal.pdf".

  var f: File = File.applicationStorageDirectory.resolvePath (fileName);

  Save the file in the local space

  If (f.exists == false) {}

  trace ("file does not exist. Record file');

  var fs:FileStream = new FileStream();

  FS. Open (f, FileMode.WRITE)

  fs.writeBytes (dataContent);

  FS. Close();

  trace ('saved');

  }

  }

• Help loading the (huge) large XML files

  Hi all
  
  I have a new project that will involve loading a 70 000 KB XML document that I will work on short time. I'm sure that there is no way I want to load all of this before the user can start using the data. Does anyone know what I should do to work with this large of a file in Flash? Any suggestions on books or Web sites that may offer a solution would be great. I do not expect a complete documentation and/or code just a point in the right direction on how to achieve this.
  
  Thank you

  Thanks Rothrock. It's pretty much exactly what I was looking for. I wasn't sure if I could get to 'parts' of the Flash xml file. I think I'll write a script to split the large file into smaller files or the mandrel in a database or something. This way I can access the smaller Flash data files.

  Thanks for the tip on the Newsgroups.