parse error the server clients.xml file
Hello
I just installed ESX4i on a stand-alone server and I get error indicating:
Parse error the server "servername" clients.xml file Connection will continue, contact systems administrator
Clicking OK is followed
"The type initializer for ' VirtualInfrastructure.Utils.http.webrequestproxy ' threw an exception
No idea what may be the cause. I installed the vSphere client.
See you soon
Please consider my response as 'useful' or 'proper' marking
If you installed on Windows 7 search the forums a good thead on the same error and a workaround there.
Tags: VMware
Similar Questions
-
Parse error the file server clients.xml - after upgrade to Windows XP
After a lot of Googling, any discussion of this "error analysis of the server clients.xml file" is centered around the problems in Windows 7 before the last update. But I'm in version 4.0 on Windows XP and it worked fine for several months... After this last series of XP was updated a few days ago, I now get the connection analysis problem and a reinstallation of the client has not changed anything.
With more precision, I had used the client to connect to the ESXi machine, then was downloading a large vmdk on the local computer from the data store and it was abandoned in the early hours of the morning to 67% complete, and when I discovered it in the morning, the local PC had been restarted , with alert windows to system tray "Due Windows install an important update and restart your computer" etc. I also rebooted on the ESXi machine management agents, does not.
Have not tried to restore to a restore like still - point finally need to keep the machine upgraded to windws last orders. I can hit the ESXi machine from another computer XP adjacent to the computer problem, same vlan, etc by using the virtual Client, no problem.
The logs show that the error is caused by a (probably on ESXi) clients.xml file check with result a "ambiguous match." Uninstall the vSphere client must leave info register behind, or the IPS machine is to remember something on my local computer connecting to it somewhere...
-steve
That is your problem
If you find this or any other useful information, please consider
awarding points to 'Correct' or 'useful '.
Gregg Robertson, VCP, MCSE, MCSA, MCTS, MCITP
-
Parse error the file "clients.xml" Server "SERVER IP"...
Hello
no idea why I get this error:
Parse error the file "clients.xml" Server "SERVER IP". Logon will continue, contact your system administrator.
and after pressing the OK button, I get another error:
The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception
When I try to connect to ESXi 4.0 with vSphere client?
My clients.xml file content (https://SERVER IP/client/clients.xml):
& lt; ConfigRoot & gt; ------& lt; ClientConnection id "0000" = & gt; ------& lt; authdPort & gt; 902 & lt; / authdPort & gt; ------& lt; version & gt; 4 & lt; / version & gt; ------& lt; exactVersion & gt; 4.0.0 & lt; / exactVersion & gt; ------& lt; patchVersion & gt; 1.0.0 & lt; / patchVersion & gt; ------& lt; apiVersion & gt; 4.0 & lt; / apiVersion & gt; ------ & lt; downloadUrl & gt; https://*/client/VMware-viclient.exe < /DownloadURL & gt; ------& lt; / ClientConnection & gt;-& lt; / ConfigRoot & gt;-
Thank you
I bet you're under Windows 7. The customer is currently divided on 7 and compatibility modes will not help. The frustrating bit is that it works on Vista.
-
Parse error META-INF/application.xml
12.1.3 Jdev
I was creating a POC on the deployment of the ADFBC components as a service.
I followed all the steps of http://technology.amis.nl/2010/12/29/quickly-creating-reploying-and-testing-a-webservice-interface-for-adf-business-components/
But when I deploy, I get this error below. And I do not have this file in my application. Please help, is there any other configuration must be in 12 c?
[11:37:25]-deployment began. ----
[11:37:25] the target platform's (Weblogic 12.x).
[11: 37:26] recovery of the existing application information
[11: 37:26] analysis of the dependence running...
[11: 37:26] building...
[11: 37:27] deployment of 3 profiles...
[11: 37:27] wrote the Archives Module to C:\JDeveloper\mywork\ADFService\Model\deploy\ADFService_Common.jar
[11: 37:27] WARNING: the commonly named resources below could cause errors of reusability to your consumers.
Provide a unique name for the resources in this project, or start with a different project.
model / Model.jpx
[11: 37:27] wrote the Archives Module to C:\JDeveloper\mywork\ADFService\Model\deploy\ADFService_MiddleTier.jar
[11: 37:28] wrote the Module Enterprise Application to C:\JDeveloper\mywork\ADFService\deploy\ADFBcServiceProf.ear
[11: 37:29] Application deployment...
[11: 37:29] [Deployer: 149193] Operation "deploy" on demand "ADFBcServiceProf" failed on "DefaultServer".
[11: 37:29] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy ADFBcServiceProf on DefaultServer. : META-INF/application.xml parsing error.
[11: 37:29] weblogic.management.DeploymentException: parse error META-INF/application.xml
[11: 37:29] undeployment.
[11:37:30] - incomplete deployment.
[11:37:30] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Hello
Found on the issue. Please omit the last step in the link above to create a profile to deploy the EAR file.
Rather, we should make the profile with which the model is created. It works very well.
Thank you
Hari
-
25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?
I had tried... .but not possible... someone has this problem soluton...
Prom KrishnaNyaupane Hello,
Please check the TechNet link below for a proposed solution.
http://social.technet.Microsoft.com/forums/en-us/officesetupdeploy/thread/86787c69-5909-4885-843e-b8b977e5cc33Let us know if it helps.
Marilyn
-
LSX-00204 error when validating an XML file on a registered scheme
Hello
When I want to validate an XML file against the registered scheme I get the following error:
ORA-31154: Ungultiges XML-Dokument ORA-19202: Fehler bei XML-Verarbeitung LSX-00204: additional data am Ende von komplexem aufgetreten element
Here is the schema snippet:
<! - the address of a given party in fixed or free form possibly the two forms - >
< xsd: complexType name = 'Subscription_type' xdb:SQLType = "ITX_FTC_ADDRESS_TYPE_O" xdb:maintainDOM = "false" >
< xsd: annotation >
< xsd: documentation XML: lang = "fr" >
The user has the possibility to enter the data concerning the address of a party, either in a single long field or to distribute data on items up to eight or even to use both formats. If the user chooses the option to enter the necessary data in separate elements, the container for this item will be "AddressFix". If the user chooses the option to enter the necessary data in a way less structured in "AddressFree" all the available coordinates must be submitted as a string of bytes, empty or ' / ' (slash) or trolley line break return used as a delimiter between the parts of the address. PLEASE NOTE that the country code address is outside these two elements. The use of the fixed form is recommended as a general rule, to allow an easy match. However, the use of the free form is recommended if the sending State can surely identify and distinguish the different parts of the address. The user wants to use both formats for example if in addition which separates the logical part of the address he also wants to show a decent breakdown in print-lines of delimiters in the form of free text. In this case, "AddressFix" must precede the 'AddressFree '.
< / xsd: documentation >
< / xsd: annotation >
< xsd: SEQUENCE >
< xsd: element name = "PostalCode" type = "iso: CountryCode_Type ' xdb:SQLName = 'COUNTRY_CODE' / >
< xsd: Choice >
< xsd: element name = "AddressFree" type = "xsd: String" xdb:SQLName = "ADDRESS_FREE" / >
< xsd: SEQUENCE >
< xsd: element name = "AddressFix" type = "sfa:AddressFix_Type" xdb:SQLName = "ADDRESS_FIX" / >
< xsd: element name = "AddressFree" type = "xsd: String" minOccurs = "0" xdb:SQLName = "ADDRESS_FREE" / >
< / xsd: SEQUENCE >
< / xsd: Choice >
< / xsd: SEQUENCE >
< xsd: attribute name = "legalAddressType" type = "stf:OECDLegalAddressType_EnumType" use = "optional" / >
< / xsd: complexType >
The problem occurs only when the second choice (when: "AddressFix" and "AddressFree") was given in the XML file. When only the first choice ("AddressFree") gave then the validation against schema very well recorded works.
I think that the problem is based on the generation of all objects in the database of dbms_xmlschema.registerSchema.
BTW, how is possible to get a more meaningful error message because the error I get is very common, and I can't imagine in which the problem occurs.
Thanks in advance.
Best regards
Martin
I have reproduced the issue on 11.2.0.4 using the Schémas XML FATCA.
declare l_schemas sys.odcivarchar2list := sys.odcivarchar2list('isofatcatypes_v1.0.xsd', 'oecdtypes_v4.1.xsd', 'stffatcatypes_v1.1.xsd', 'FatcaXML_v1.1.xsd'); begin for i in 1 .. l_schemas.count loop dbms_xmlschema.registerSchema( schemaURL => l_schemas(i) , schemaDoc => xmltype(bfilename('FATCA_DIR', l_schemas(i)), nls_charset_id('AL32UTF8')) , genTypes => true , genTables => false , enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_NONE ); end loop; end; /As in schema extract that you provided, I've annotated subscription_type complexType with xdb:maintainDOM = "false".
Then tried to validate the example NilFIReport.xml file after adding an AddressFix element:
SQL> declare 2 doc xmltype := xmltype(bfilename('FATCA_DIR', 'NilFIReport.xml'), nls_charset_id('AL32UTF8')); 3 begin 4 doc.schemaValidate(); 5 end; 6 / declare * ERROR at line 1: ORA-31154: invalid XML document ORA-19202: Error occurred in XML processing LSX-00204: extra data at end of complex element ORA-06512: at "SYS.XMLTYPE", line 354 ORA-06512: at line 4Now, let's abandon patterns, remove the xdb:maintainDOM annotation (or set to true, the default) and re - register:
SQL> declare 2 doc xmltype := xmltype(bfilename('FATCA_DIR', 'NilFIReport.xml'), nls_charset_id('AL32UTF8')); 3 begin 4 doc.schemaValidate(); 5 end; 6 / PL/SQL procedure successfully completed.Works.
Conclusion: set maintainDOM to false when using XS: Choice.
There is probably a mess when the positional descriptor (attribute "$SYS_XDBPD") is missing in this case.
-
Dreamweaver had problems during the construction of the current menus.xml file menus
So, after having trouble with my Photoshop scratch disk, I had to do an archive and install of my OS 10.6.1 and then reinstall the suite Adobe. then I had to run the repair of the license utility (http://www.adobe.com/support/contact/licensing.html).
Now everything works but Dreamweaver, which is throwing the following error message:
"Dreamweaver had problems during the construction of the current menus.xml file menus.
If please remove the current menus.xml file and rename menus.bak menus.xml.
I tried. menus.bak is a directory, not a file. Even renaming the directory did not work.
I saw this http://forums.Adobe.com/message/2188511#2188511
but I do not have a directory/FlashPlayerTrust /, nor do I see what that has to do with Dreamweaver.
I could not find a corresponding solution to this http://forums.Adobe.com/message/862339#862339 for Mac OS.
Ce http://forums.Adobe.com/message/3396334#3396334 did not help, either.
Anyone have any ideas?
Thank you!
I got this same error this morning when I tried to open Dreamweaver CS5 (any type of document have been found in the...). I'm on a PC. There was very little posts about it so I thought I'd post what worked for me. It must have been a day or something by Akamai.
I went to C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes and open MMDocumentTypes.xml in Notepad ++. There were about 100 lines of NULL in the configuration of Akamai, so I deleted all the information between the
-
I am trying to open a file in Pages 09 and am getting notice has the required index.xml file is missing. Is it possible for me to access the file? I don't know why this happened.
You open a file with Pages ' 09 Pages 5.x.
You need to right-click on the file and open it with Pages 5.x (the one with the orange document icon).
Peter
-
How to integrate the dynamic SQL generated in the data definition XML file?
Hi all
I have it here is the XML file that is attached to the definition of data model RTF as below. Also, I have a function that will return to create a dynamic query as shown below.
<?xml version="1.0" encoding="UTF-8"?> <dataTemplate name="XYZ" description="iExpenses Report" Version="1.0"> <dataQuery> <sqlStatement name="Q2"> <
If you already have the basics of an HttpConnection down, it gets a little easier later.
Once you have the your HttpConnection InputStream you can create a Document for analysis using the built-in XML parser.
public static Document getXmlDoc(InputStream in) { Document doc = null; DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance(); DocumentBuilder docBuilder; try { docBuilder = docBuilderFactory.newDocumentBuilder(); docBuilder.isValidating(); doc = docBuilder.parse(in); doc.getDocumentElement().normalize(); } catch (Exception e) { System.out.println("getXmlDoc Error: " + e); } return doc; }It is a basic function that I use to read a XML from a web server. If there are errors reading or parsing of the document, this function returns null.
After making sure that you close your InputStream, you can start reading your document.
-
export data from the table in xml files
Hello
This thread to get your opinion on how export data tables in a file xml containing the data and another (xsd) that contains a structure of the table.
For example, I have a datamart with 3 dimensions and a fact table. The idea is to have an xml file with data from the fact table, a file xsd with the structure of the fact table, an xml file that contains the data of the 3 dimensions and an xsd file that contains the definition of all the 3 dimensions. So a xml file fact table, a single file xml combining all of the dimension, the fact table in the file a xsd and an xsd file combining all of the dimension.
I never have an idea on how to do it, but I would like to have for your advise on how you would.
Thank you in advance.You are more or less in the same situation as me, I guess, about the "ORA-01426 digital infinity. I tried to export through UTL_FILE, content of the relational table with 998 columns. You get very quickly in this case in these ORA-errors, even if you work with solutions CLOB, while trying to concatinate the column into a CSV string data. Oracle has the nasty habbit in some of its packages / code to "assume" intelligent solutions and converts data types implicitly temporarily while trying to concatinate these data in the column to 1 string.
The second part in the Kingdom of PL/SQL, it is he's trying to put everything in a buffer, which has a maximum of 65 k or 32 k, so break things up. In the end I just solved it via see all as a BLOB and writing to file as such. I'm guessing that the ORA-error is related to these problems of conversion/datatype buffer / implicit in the official packages of Oracle DBMS.
Fun here is that this table 998 column came from XML source (aka "how SOA can make things very complicated and non-performing"). I have now 2 different solutions 'write data to CSV' in my packages, I use this situation to 998 column (but no idea if ever I get this performance, for example, using table collections in this scenario will explode the PGA in this case). The only solution that would work in my case is a better physical design of the environment, but currently I wonder not, engaged, as an architect so do not have a position to impose it.
-- --------------------------------------------------------------------------- -- PROCEDURE CREATE_LARGE_CSV -- --------------------------------------------------------------------------- PROCEDURE create_large_csv( p_sql IN VARCHAR2 , p_dir IN VARCHAR2 , p_header_file IN VARCHAR2 , p_gen_header IN BOOLEAN := FALSE, p_prefix IN VARCHAR2 := NULL, p_delimiter IN VARCHAR2 DEFAULT '|', p_dateformat IN VARCHAR2 DEFAULT 'YYYYMMDD', p_data_file IN VARCHAR2 := NULL, p_utl_wra IN VARCHAR2 := 'wb') IS v_finaltxt CLOB; v_v_val VARCHAR2(4000); v_n_val NUMBER; v_d_val DATE; v_ret NUMBER; c NUMBER; d NUMBER; col_cnt INTEGER; f BOOLEAN; rec_tab DBMS_SQL.DESC_TAB; col_num NUMBER; v_filehandle UTL_FILE.FILE_TYPE; v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file); v_CRLF raw(2) := HEXTORAW('0D0A'); v_chunksize pls_integer := 8191 - UTL_RAW.LENGTH( v_CRLF ); BEGIN c := DBMS_SQL.OPEN_CURSOR; DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE); DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab); -- FOR j IN 1..col_cnt LOOP CASE rec_tab(j).col_type WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000); WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val); WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val); ELSE DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000); END CASE; END LOOP; -- -------------------------------------- -- This part outputs the HEADER if needed -- -------------------------------------- v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_header_file,p_utl_wra,32767); -- IF p_gen_header = TRUE THEN FOR j IN 1..col_cnt LOOP v_finaltxt := ltrim(v_finaltxt||p_delimiter||lower(rec_tab(j).col_name),p_delimiter); END LOOP; -- -- Adding prefix if needed IF p_prefix IS NULL THEN UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt); ELSE v_finaltxt := 'p_prefix'||p_delimiter||v_finaltxt; UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt); END IF; -- -- Creating creating seperate header file if requested IF NOT v_samefile THEN UTL_FILE.FCLOSE(v_filehandle); END IF; END IF; -- -------------------------------------- -- This part outputs the DATA to file -- -------------------------------------- IF NOT v_samefile THEN v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_data_file,p_utl_wra,32767); END IF; -- d := DBMS_SQL.EXECUTE(c); LOOP v_ret := DBMS_SQL.FETCH_ROWS(c); EXIT WHEN v_ret = 0; v_finaltxt := NULL; FOR j IN 1..col_cnt LOOP CASE rec_tab(j).col_type WHEN 1 THEN -- VARCHAR2 DBMS_SQL.COLUMN_VALUE(c,j,v_v_val); v_finaltxt := v_finaltxt || p_delimiter || v_v_val; WHEN 2 THEN -- NUMBER DBMS_SQL.COLUMN_VALUE(c,j,v_n_val); v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_n_val); WHEN 12 THEN -- DATE DBMS_SQL.COLUMN_VALUE(c,j,v_d_val); v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_d_val,p_dateformat); ELSE v_finaltxt := v_finaltxt || p_delimiter || v_v_val; END CASE; END LOOP; -- v_finaltxt := p_prefix || v_finaltxt; IF SUBSTR(v_finaltxt,1,1) = p_delimiter THEN v_finaltxt := SUBSTR(v_finaltxt,2); END IF; -- FOR i IN 1 .. ceil( LENGTH( v_finaltxt ) / v_chunksize ) LOOP UTL_FILE.PUT_RAW( v_filehandle, utl_raw.cast_to_raw( SUBSTR( v_finaltxt, ( i - 1 ) * v_chunksize + 1, v_chunksize ) ), TRUE ); END LOOP; UTL_FILE.PUT_RAW( v_filehandle, v_CRLF ); -- END LOOP; UTL_FILE.FCLOSE(v_filehandle); DBMS_SQL.CLOSE_CURSOR(c); END create_large_csv;
Maybe you are looking for
-
I was using my 1st generation ipod nano
I was creating a new playlist using my ipod nano (2 gb) when all of a sudden all the music that he dissappeared. ITunes has no music because it is a new installation of itunes 12. How can I get music back? If I can?
-
Satellite 1950 801 does support WLan?
Is Toshiba 1950-801 charge wireless network? And how do I install the driver for it. Note: I have the on/off switch for the wireless in the front of the laptop
-
driver Dell is not the problem of download is netframework 3.5
Dear Sir, I am a hardware engineer Sir I am format dell inspiron 530 s system and istalled windows xp but audio driver is not istalled problem is 0101 codes so please Sir help me
-
Laser Jet Pro M201dw: Language setting
Just bought this printer and accidentally set the wrong language. I tried to unplug and let it sit, but it always starts in a foreign language. How to do a hard reset on this printer? Thank you Tricia
-
Vista will not connect to WiFi automatically (but my iPhone works well!)
After re-installing Vista window by the backup of my laptop LG drive, it is now impossible to automatically connect to the WiFi at home. Every time when I start the laptop (even of mode "sleep"), the network went & I have to choose WiFi home network