PC became start longer than the next day!

Similar Questions

• HP Pavilion Media Center TV PC became start longer than the next day!

  I have a HP Pavilion Media Center TV PC. It works fine until last Friday, 10/02/2012. The machine became unbootable plue. On the eve of the machine stopped properly. (We always shut down the computer at night.)

  Now when I turn on the machine, I hear slight clicking sounds. Then he asks recovery discs and finally it spits out the error message: no hard drive found. The PC recovery cannot continue.

  I note the current configuration as follows:

  First channel device o: [NO]

  First channel device 1: [NO]

  Second channel device o: [NO]

  Second channel device 1: [NO]

  :

  :

  According to the information above can anyone give me some advice? Thank you.

  Peter

  Thank you.

  I just got the same 320 (for about $95 taxes MY). She is now recovering.

  I keep my fingers crossed but always.

  It is a nightmare, simply, a system becomes unable to see the hard drive from one day to the next!

• Since the update for Firefox 4, I am no longer offers the possibility to save the tabs when closing making it much faster to access these sites when starting the next day. Why this possibility has been removed? It's a favorite feature.

  Since the update for Firefox 4, I offer more the ability to save tabs on shutdown - makes more rapid access to these sites when commissioning the next day. Why this possibility has been removed? It was a feature favorite and saved a lot of time.

  Firefox 4 records the previous session.
  
  You can use "Firefox > history > restore previous Session" for the previous session.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

  You can set the preferences of warning on the topic: config page true via the context menu or toggle the value with a double click of the left.

  • browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
  • browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  • browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  • browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Open a book, tap, tap of he two, disable auto-nuit theme.

  

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• Can we start a P2V and check the result the next day?

  We will conduct P2V to a number of physical machines.  We plan to start P2V at around 18:00 and if it works well for 10%, we will check the result the next day.  Is this OK or we should keep an eye during the conversion?

  Thank you

  Personally I would keep an eye incase there is a problem that can be solved, but if you feel confident it I no reason why you can't let this run and see if she successfully completed the next day to remember if it does not you may have a few waaiting furious users for you.

• How can I leave the program runs longer than the duration of sleep?

  I have a desktop Pavilion Elite HPE - 110 t (win7) .  Turn off display & sleep have the default value (10 & 20 minutes).  According to the instructions that I read (somewhere in the paper documentation) when I got to the computer a few months ago, I do not turn off it during the night.  I think included grounds for diagnostics to run (by default grid) & I "think" I've seen (the next day) scans messages, updates, etc. have been executed.  I however turn off my modem to prevent the activity internet auto (anyway) during the night.

  This configuration has been satisfactory until this morning, when I tried to leave an app running I knew would require more than one hour to complete.  I had other non-computer tasks to do & did not sit the computer baby to keep him awake.  In fact, I thought that 'activity' (including the activities of memory without keyboard activity) he would keep awake.

  To my surprise when I got home 3 hours later, treatment stopped about 45 minutes after the start.  This was determined by the timestamps of the output files.  Normal processing resumed after that I have he awakened from his sleep.

  Is there a way (outside change go-to-sleep time setting each time) to allow work of long-term programs/application to keep running & to go to sleep after the treatment is finished? Am I wrong to think that 'auto diagnostic' are running when the computer & I sleep at night?

  Thank you

  The process will continue even after the monitor goes to sleep.

  I first noticed this problem when you make copies of images hard drive hard drive.

• PC freezes and work the next day and freezes again...

  My dell dimension 4700 with windows xp computers crashes often, and the keyboard/mouse both work, forcing me to unplug the computer. This usually happens after no more than an hour of medium/light use, so he does not start correctly and freezes on the splash screen or a screen of welcome for the rest of the day and the next day he again works for an hour and repeat the cycle.

  I have many important things on the computer and it is the only computer I can access easily, how to fix?

  So, if I am understanding correctly, you experience this problem with safe mode too?

  Try the following steps to see if the problem resolves

  1 restore the PC to an earlier date.

  2. make Hard Reset

  Here's how to do a hard reset

  1. turn the computer off completely

  2. unplug the code of the power supply to the back of your computer and make sure that there is no source of energy from the computer

  3. remove all cables plugged in to your computer, including the keyboard and mouse.

  4. press the power button on your computer for 30 seconds, you could see the power light flash and go

  5. reconnect the power cable, and the mouse and key board

  6 turn the computer and watch her for an hour or two.

  7. If the computer does not freeze, taken in the other device, one at a time, please wait a few minutes between plug questions to make sure that the connected devices will not cause this problem.

  If this resolves the problem, you can save all your files to an external storage device and recover the computer completely.

  If the recovery does too much help, this indicates that there may be a hardware failure, most often, the sticks of memory can cause this problem or the processor, and it would be a good suggestion for the service computer.

• ProRes renders EI have garbage Frames / longer than the Source

  I had some weird problems output prores of After Effect recently. My workflow typical offline was Prores422HQ or Prores4444 exit offline for and it is a regular method of rock for years. Recently, all Prores of After Effects renders have additional frameworks of garbage and longer than the source:

  An animation example 720 with DPX source, attended the Prores4444 image eventually 724 frameworks when read on the desk or ingested in Avid/Final Cut. When this rendering is re-imported in AE, it is considered as having only 720 images and fits perfectly into the chronology of 720 original frame, but outside the EA, it is considered as having 724 frameworks (QT7, Avid, Final Cut, etc.).

  Has anyone seen this problem before? I started using Avid rather - codecs which works very well - but this question worries since most deliverables are Prores these days... and AE was the best way to maintain the 16 bits of color in these sorties.

  * This problem started around a month ago and is on all GFX boxes in the Office *.

  Chris

  This problem is resolved by update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• Firefox will remember only my login id and the password for the current day, the next day he doesn't remember.

  Every day I have to enter my username and password for sites that I connect. As long as I go back to these sites on the day current firefox will remember of my ID and password. After I closed my computer at night and come back the next day, there is no password not saved in my tool options and I have to redo the entire process. It is a problem of every day.

  You are welcome.

  Could you please click on the button "solved it' next to the post that solved the problem for you? This will help others looking for a solution to the issue.

  Thank you.

• change the language, it worked and the next day it didn't

  on my new computer, I added the Russian language and got an icon with Russian and English on the desktop. I tried in Microsoft Word, and it worked fine. The next day, I tried to change the language, the sowes of the Russian icon, but when I try to type is englishRemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  No guarantee:

  Try doing a system restore. Choose the date before you had this problem as your restore point.

  Start button > Search box, type System Restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How can I receive the follow-up call drom rechnician in India by the company who worked inside my computer and told me he would call back to finish the next day but was not back asking.

  Arround a wonderful gentlerman of your warming suppourt June 21 advanced team in India loged in my computer and started the process of unlocking me Real Player and Film of the Photo as well and window frreeing my computer to its State frozen close. He said he had to call the next day to finish his work, but never called me back. Thus, I am unable to use the Real Player or your Film or Photo each now and two songs, I worked hard on that disappeared. I have sufferred a lot of grief and loss of sleep over these questions after all you at Microsoft. Including the promotion of your product among the many artists name in Tribeca, New York City in my Art Center. Please have him or a her calaber techniciam complete the unfinished work. I'm devastated but still a believer in your business.

  Sincerely

  Daniel Metelitz

  * removed *.

  E-mail address is removed from the privacy *.

  Daniel

  Unless you have initiated the call, it is DEFINITELY a scam.  We deal with dozens of them someday.  How, he proved that he was against MS?

  I also wouldn't put my phone number if I were you.

• HRMS letter generated using WEB ADI but the next day it will disappear!

  HRMS letter generated using WEB ADI but the next day it will disappear, I received your comments as to check with the Getting Started Guide. It's like the assignment of function form and much more.

  Please help me to go further.

  Hi rezrezrerez,

  Good to know that the problem is solved. Please mark the post as answered.

  Thank you

  Sanjay

• Can I rent a movie on a laptop the night before and watch it the next day on a plane

  Can I rent a movie on a laptop the night before and watch it the next day on a plane

  About rent movies on the iTunes Store - http://support.apple.com/HT201611

• updates that have failed the day 1, won't they update automatically the next day? and persevering until they are right? or what I need to do it manually? Dang! Tell me that it is not so...

  OK, so I'm at a dead end and had to buy a computer laptop refurb when my hard drive died while he's on leave.  Bought Monday, they had XP on it, but I checked the updates and it had 74 must be installed.

  I don't have access at home so I tried to install everything that was needed every day of the library since I bought this laptop on Monday.  On day 1, he said 74 needed to install updates, then I guess that the automatic far did a little more every day.  Finally the Service Pk 3 failed to install for the last 2 days.

  Now today I try again, but I'm looking back and see that some other updates in recent days have also failed.

  I don't want to go back and install each separately out of 110 undates installed.

  My question is: If one day some updates failed, the next day, wouldn't it automatically DL updates that failed the day before, get current?  If I were a computer, I would not keep DL and install new updates until the 'old' have been installed correctly.  So I just reasoning flawed or computers work this way?  Please tell me that I can't go back and redo all of those failed?

  Thanks a lot for your help in this matter!

  U

  .. .Meanwhile service pk 3 tells me he has finished loading and is ready to install, restart, etc... and I just canceled the installation because it seems that to me... If these other failures are not fixed first there will be the svc pk 3 effect, as well.  Of course they wish that no cat could have answered my question instantly... but no, he referred me to a technical person...

  Well, perfectionism causes procrastination... and sometimes it's just maddening... Please help me?