PC crashes when you use Windows 7 and ipod synchronization

My PC gives me a blue screen of death and crashes when I try to sync my iPod 160 GB. I use Windows 7 and iTunes 9. All my drivers are up to date, as well as my windows.

I'm pulling what little hair I have left. Help.

Hello
 
You need execute the instructions below to refine the question.
 
How do you try to sync music to the device?
Tell us the message you get when you try to synchronize?
 
As you've updated the latest drivers on your comoputer, I recommend you to try this issue with a clean boot to see if we can identify a program or driver causing the problem you are having troubleshooting.
 
A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

Clean clean boot.
 
1. click on start, type msconfig in the search box and press ENTER.
The user account control permission.
If you are prompted for an administrator password or confirmation, type
password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load starting points.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
 
If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
 
http://support.Microsoft.com/kb/929135
 
Reset the computer to start as usual.
 
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig.exe in the start search box and press ENTER.
 
If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
 
When you are prompted to restart the computer, click on restart.
Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • RIO crashes when you use tcp communication and web server

    Hello

    my controller cRIO crashes after a short time (usually less than a minute), when I use simultaneously to the web server (to interact with a remote control) and make some tcp communication (using STM 2.0 library) for data logging. Is it a problem of overall performance of the controller, or a problem of band network bandwidth (I'm happy to send some values every 100ms), or a programming problem; in the latter case, what should I do to make the system more stable?

    Kind regards

    PS: I use a cRIO 9022 with LV 2009f2 + RT and NOR-RIO 3.3.0

    Hello

    You can try with a simple while loop + delay instead of loop timed for TCP communication loop.

    Concerning

  • Windows crashes when you use any application and stops in hibernation mode

    Hello people who might be able to help me,

    I come back from summer vacation and turned on my computer with windows 7 at first all seemed fine until I wanted to open an application. Opening was always very well, but when I did something on this subject, it crashed. Also my PC then stops in the hibernation mode. I can access internet, but nothing else. Then I tried to recover my PC. It turns out I have no recovery points and can only restore factory mode that sucks. Now that was new, since always, before I could restore my PC to a previous session without making any restore points. What can I do to restore my PC and ban these errors?

    Hello Nicolas,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    1 did you receive no error message or code when the application or the system crashed?
    2. What is the brand and model of your computer?

    Thank you for details on the question and your efforts to resolve.

    This problem can occur because settings to corrupt, or because of the presence of unused files in Windows. This can also occur due to the presence of any virus or malware.

    I appreciate the fact that you want to restore your computer. However, until you do, I suggest you to try the following methods and check if it helps.

    Method 1:
    Resolution of performance problems and check.
    Reference:
    Open the troubleshooter of Performance
    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    Please also run convenience store power.
    Reference:
    Open the troubleshooter of power
    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    If this does not help, use method 2.

    Method 2:
    Microsoft safety scanner run and check the issue.
    Reference:
    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Laptop crashes when you use PCI-6132 and a box of magma

    Hello

    I use a laptop with a magmabox (Cardbus connection) to accommodate a card DAQ of NOR-PCI-6132. When I'm data acquisition the laptop freezes sometimes and has to be restarted. Anyone who is familiar with such a problem?

    I did not have this problem when the DAQ card is in an office with a regular PCI slot. So, I guess that the problem is related to the magmabox.

    Nick Wagner

    Hi Nick,

    The problem could very well be linked to the magmabox, but before that can be determined, I need more information about your hardware.  I already know about the PCI-6132, but I don't know anything about your laptop or magmabox cardbus connection.  Can you tell me the manufacturer and the model number of your laptop and the magmabox so I can check their specifications? Thank you.

    Best wishes

    Wallace F.

  • Office constantly crashes when you use Windows Explorer

    Original title: Vista desktop does not properly

    Hi all

    I have a Vista PC, which once at the office, some services starts to run a bit wobbly, apps will work, but if you go in Outlook, which bombards. If you try and run anything specific with explorer.exe as an installation from the office or some thing of the command run you get just the ORB of spinning and nothing else then answers his task manager > disconnect from time...

    Make a new connection profile also does not resolve the issue because it allows me to create the new connection, but no connection to him he just gets stuck on the spinning ORB after I click on the user name. So why I cant even connect to another user? Its similar Vista is located in constant read-only mode and create new files, etc. to make a new profile outside of Safe Mode...

    I ran checks the malware + viruses and both come back clean

    I'm not 100% leads is a matter of explorer.exe like I don't understand why if I go to the line run and type msconfig or services.msc, nothing happens

    If I connect with safe mode + Networking the PC works fine too if I run a diagnostic startup in msconfig, it works very well

    In summary, I can't run anything from the control run, I can't run multiple applications and Outlook bombs if I try run it... Anything other than a spinning ORB!

    Thank you

    Jon

    Hi Jon,

    Please provide an overview of the details of the question. As you said that the computer works fine in safe mode and when the computer is in clean boot state, I suggest you put the computer to boot to safemode, and then start the computer normally. Once you have started the computer normally, you must continue with the clean boot process to find the problem causing the element. Please visit the below mentioned link to perform the clean boot:

    http://support.Microsoft.com/kb/929135

    Kind regards

    Gaurav Prakash - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Lock on some of my icons, as well on my desktop and visible when you use Windows Explorer.

    I have these small yellow or gold (according to the colors of your screen) padlock superimposed on some of my icons on my desktop and visible when you use Windows Explorer and would would like to know how what they are, and how I can remove them.

    Hi Will,

    Thank you for keeping us posted.

    Glad to know that the problem has been resolved.

    I appreciate all your efforts really to try to solve this problem.

    Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

    We will be happy to help you.

    Thank you.

  • Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

    Hi all

    As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

    I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

    Any assistance received very warmly.

    Thank you!

    Hello

    Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

    Maybe's external screen connected to the docking station?

  • Crashes when you use safari

    MY Mac Pro 2009 crashes when you use Safari. I can tell when it is about to happen. The screen will start to Flash and the mouse still moves, but you cannot select anything. Sometimes I can get it to unlock by pressing the ESC key.

    When the freeze on Safari, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • C00D11C8 error message when you use Windows Media Player

    How to fix C00D11C8 error messages when you use Windows Media Player.

    I've recreated the error on another computer running the same level of the OS and SP but received a more explicit error message telling me to get the codex of GoToMeeting.

    I downloaded the GoToMeeting codex and the problem was solved.

  • 80070643 error code when you use Windows update

    I am running Windows 7 Home Premium - 32-bit. I get the error code 80070643 when you use Windows update - it fails on the Office Live add-in 1.5. I uninstalled .net Framework and reinstalled. Office Source Engine turned on, started work. Any ideas how I can fix it. I am running Office 2010 beta as well.

    Assuming that Office 2007 or 2003 is also installed, uninstall try Office 2010 Beta and once again. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

    I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

    Alan McC
    Do you have other accounts of users on this PC?  If you install this update from the main account?

    You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
    If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • You met the C00D10D1 error message when you use Windows Media Player

    Hello

    I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

    You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

    Codec is missing

    Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

    The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

    Hello
     
     
    1. What is the file type or extension that you try to play?

    If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
    Player Windows Media for Windows XP supported Codecs
    http://support.Microsoft.com/kb/291948
     
    Package of Installation of codec
     
    See also:
    Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
    http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
     
    Note: The above are published in the Windows 7 category, but they apply to Windows XP too.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • screen goes black when you use windows live mail

    In the last week or two, the screen goes black when you use windows live mail. I use windows vista home and I suspect it has something to do with some windows updates, I installed recently. How can I find and fix the problem? Thank you

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • I remain unplugged for a long period of receipt message that dns does not when you use windows 7

    I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN

    Concerning

    NAWAB IKRAMULLAH KHAN

    Hello

    ·          When the issue started?

    Method 1:

    Run the Windows 7 network troubleshooting and check if it can automatically find the fault.

    For more information about how to run the network troubleshooter, check this link:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Get the network store event of Event Viewer logs.

    Check out this link on the event logs of the resolution of network problems.

    http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

    Method 2:

    a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.

    b. at the command prompt, type the following command and press ENTER:

    ipconfig/flushdns (there is a space between ipconfig and /)

    It will show you the message successfully empty the cache of DNS resolution.

    c. at the command prompt, type the following command and press ENTER:

    ipconfig/registerdns (there is a space between ipconfig and /)

    d. at the command prompt, type the following command and press ENTER:

    ipconfig/all (there is a space between ipconfig and /)

    e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

    f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

    g. If this is the case, try this:

    ·          enough ipconfig at the command prompt and press ENTER.

    ·          ipconfig / renew in the command prompt and press ENTER.

    h. test it again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  • When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.

    When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

    When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

    ===================================
    Try to visit the support site of your new service provider
    and search for instructions on how to set up your email.

Maybe you are looking for