PC freezes at different times and all by doing tasks

Similar Questions

• How to display the clock (time and date) in the task bar at the bottom of the right hand of the computer

  I ask for help.

  I want to be able to display the clock (time and date) in the taskbar at the bottom right of the computer

  Hi FrankNikolich,

  Thanks for asking! I understand that you want to display the clock and date in the system tray.

  1. have there been recent changes to the system before the show?

  Follow these steps and check if that helps.

  (a) right click on the taskbar, click Properties, click Notifications.

  (b) click on the Customize tab, click on the System Turn On or OFF icons.

  (c) in the drop-down list, select Yes for the clock.

  (d) click OK.

  Answer us with the results. I'd be happy to help you further.

• Message are emerging at different times and in disorder

  My Skype messages I below to send messages to my contacts and sometimes even says they are one day ahead or back. Even when it says the exact time their Skype message appear above me and it is impossible to read because I have to keep scrolling to the top to read. I use the latest update of Windows 10 and Skype 7.17. Any ideas?

  http://community.Skype.com/T5/Windows-desktop-client/Skype-chat-messages-are-in-the-wrong-place/m-p/...

• build a dynamic array to an array of 1 D of waveforms 4 graphics, including time and all data information

  Hallo!

  I tried to put entries generated in a table with the current value of the time stamp in the first column and the data of a table 1 d of waveforms of 4 cards in the other 4 columns.

  I have some difficulties to match the data in the table. I ve simulated the code I've written and I see that the time stamp but I ve got none of the values of data in my table. I want to ask you what you think of my code and how can I achieve my goal?

  Corresponding VI is attached below.

  Thanks in advance for the answer.

  I think you're looking for it.

• After installing Lightroom 6, whenever I use it, it freezes. I uninstalled and reinstalled several times and it still does the same thing. Why?

  Please could someone help me. I am trying to edit some photos for a client and I need to fix this problem.

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  Have you tried to uncheck the option of GPU in the Lightroom preferences?

• send an email to send several times and the attachment does not open

  Outlook Express... HELP PLEASE!

  I have problems with my outlook express. When I send an email in my Inbox, it not only sent as an attachment that nobody can open, but also send them several times, sometimes more than 35 times... can someone help me with this, as all my friends are growing very tired of this?... thx

  Tools | Accounts | Mail | Properties | Advanced. Uncheck the box: "Break apart messages...". ».

• Hello ı have a problem with my phone ı cant get assistance from the Turkey you'd like ı cant me my phone and all functions does not work

  to whom it my concern

  my name is yusuf of istanbul

  I buy my phone 5 supports befor but the phone does not work and I can't phone me

  no body helps me to istanbul and people is treat me wrong here...

  So want you sell my theye problem don't chack the phone even if you please help me and send information of raphael

  I want to change my phone because I have 1.5 year warranty please inform me on the subject...

  Thank you in advance...

  Yusuf *.

  ******

  ******

  Where have you bought the phone?

• Sound keeps dropping out at different times

  LifeCam 3000

  Sound keeps dropping out at different times. All that correct adjustment. A lot of processor and memory. Under XP sp2... about to take it back!

  There may be another program that causes the problem, if that's the case, you will need to follow the steps on the following link to start your computer in a clean boot state that will identify what type of program is originally: http://support.microsoft.com/kb/310353

  If this does not work, it is possible that the hardware is defective, there could be a bad connection or another vice that causes the problem.

• Planners in different times.

  Hi all, I'm using the 11.2.0.3.0 Oracle version. We migrated all our jobs recently to the Scheduler.
  and I just found out that our work has worked in different times. All the scheduled job of database are running (maybe IS) 5 HR gap and job application manifest to run ~ 8hrs (perhaps PST) from gap.

  So I checked my DBA_SCHEDULER_GLOBAL_ATTRIBUTE shows EST5EDT and my wait was GMT. Now here's my problems

  1. the JOBS demand those submitted to the job scheduler and will also show EST5EDT simultaneously on ACTUAL_START_DATE, but these are times of PST.

  2. again even if I put this time to time in my local GMT. And run again the work (of the annex of the database but without object), it shows same time EST5EDT on column dba_scheduler_job_run_details ACTUAL_START_DATE.

  BEGIN
  () DBMS_SCHEDULER.get_scheduler_attribute
  attribute = > 'default_timezone. "
  value = > 'GMT');
  END;
  /

  I had the update time zone indicated, after being with the change below.

  After you have set the parameter. The queue of work stop and deactivation and activation of jobs still reflect the time zone change in the column next_run_date of the Scheduler.

• Vista sp1 loaded 5 times and now is the time to load a 6th why?

  Have done a reintall am downloading updates and Vista Home Basic, it happened to service pack 1 and has downloaded but won't spend, it just keeps loading Sp1 so far he loaded 5 times and is currently does for a 6th time, I can't stop or know how to erase all copies of these go to windows update says that there is an update to load and it is this sp1.  Can anyone help please

  Graham,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 12:55 Monday, November 5, 2012

• RE: Hard drive that self-test - quick test successful and all by the long test he died.

  1 main hard drive that self-test - quick test successful and all by doing the test long it turns off. What could be the problem?

  2. I tried to recover with the recovery cd received the error

  1005 if this error persists then contact Hp support.? need to order another set of CD

  Reinstall the hard drive in the laptop.  Scroll down on this page and get > Bootable CD ISO and > ImgBurn to burn the iso image to cd, a guide on the use of ImgBurn to write an ISO on a disc is here. Once created, boot from it. Delete hard drive partitions, create and format. Then try to start recovery again.

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• Work on App and travel to different time zone

  What happened to my circle of training and records when traveling to a different time zone?  Will be my streak get screwed up by the different time zone?

  Thank you

  J

  This will depend on when you switch to the different time zone.  Will travel you East or West?

  • If you are traveling to the West and extend the day, pass the watch to the new time zone, before midnight the previous zone.
  • If you are traveling from the East and the day is shortened, switch back to the previous zone, the day before that I sup, if you need complete rings.

  I posted my results for the purpose of 'stand' here: How to extend the day after midnight to complete activities and close the rings

  If you wish to extend your day past midnight to close the activity temporarily put rings the time zone to time zone more West.  Change the time zone by midnight. Now, you can use the overtime that the timezone is offset from your usual time zone to complement the missing activities.

  I tested again on a long distance flight, where the time zone to destination is shifted 8 hours than my home timezone.

  As you can see, watch OS 2.1 may give credit for activities for more than 24 hours if change you the time zone.

  At 17:00, the watch already showed that 25 hours of 'Beneficiary', more than a day.

  

  And with the 8hrs offset in my regular zone I could have accumulated 30 stand hours in work a day of:

  

  If you wish to extend your day to complete the activities in this way, do not forget to set the time zone before going to sleep, or you may forget the next day that the watch is a few hours off the coast. I'd wait to set the zone time back until after receiving the message that all tasks have been completed for the day and set the timezone to the correct time after the next hour.

• Windows 7 freezes, sometimes shows bluescreen and shows different errors

  Over the last 2 or 3 weeks, I had intermittent problems with my pc. Packard Bell iXtreme 6620 UK.

  I got a pc of HRT for a few months.
  When I acquired, I added an extra hard drive and I replaced the wifi card
  with a USB ports.
  Since then, the only change is a new graphics driver.
  No hardware or software changes for at least 3 months.

  Problem just started occurring a couple of weeks.

  Most of time, I have no problems running Win7, but sometimes the
  PC won't start, just beeps and restarts. This is it 2 or 3 times,
  and it can offer repair system. If I don't, then try to
  restart normally, and then usually it starts ok. If I accept it then
  says it is the repair, then try to reboot. I usually then power
  downwards.

  Sometimes during the restart cycle where I put upward, then after a
  shortly, I get a continuous beep of high slope and nothing else happens.
  I've then power off, and if I leave for about 10 minutes, then it usually
  restarts ok.

  Sometimes when I walk to get the Packard Bell splash screen, then the
  PC crashes, nothing else is happening.

  Sometimes I get to the Windows startup screen that says only: departure
  Windows and once again it hangs and nothing else happens.

  Sometimes when you run then the pc freezes. In this case, I usually for
  turn the power off and tell it to start normally when I turn on again. Generally
  in this case I do not get the above mentioned beep.

  Sometimes when it's cold, I get a BSOD indicating usually
  INTERRUPT_EXCEPTION_NOT_HANDLED.
  Stop: 0x0000003D
  (0xFFFFF880009CB1B0, 0 x 0000000000000000, 0xFFFFF880016FB50)

  Today, I also received the message
  ataport.sys
  Address FFFFF880016FBB5DA1FFFFF8800...

  I just got a message that the pc has been a mistake.
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 2057

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF800032839E3
  BCP3: FFFFF88006CC0070
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\080614-21637-01.dmp
  c:\systemp\WER-52681-0.SysData.XML

  This occurred after the pc rebooted while I had an open file.

  Asked me if I wanted Windows to seek a solution. I answered Yes
  and after one or two seconds, the dialog box has disappeared without a message.
  I ran Memtest who reported everything is OK. From others
  suggestions that I found that I also ran TDSSkiller from Kaspersky.
  This also gave a certificate of good health.
  I had these problems again a few minutes, turned off and rebooted
  and all is well.

  I got a pc of HRT for a few months.
  When I acquired, I added an extra hard drive and I replaced the wifi card
  with a USB ports.
  Since then, the only change is a new graphics driver.
  No hardware or software changes for at least 3 months.
  Problem just started occurring a couple of weeks.

  Windows - custom views - administrative events Event Viewer gives the
  Next:

  Error:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Caution:
  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_GENERIC & PROD_MINI_SD_READER & REV_1. 06 #7 & 29D2AFC & 0 & 058F63776378 & # 4.

  Error:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000003b (0xfffff800032839e3, 0xfffff88006cc0070, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 080614-21637-01.

  Error:
  Audit events have been abandoned by public transport.  0

  Criticism:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  directly after
  Error:
  System shutdown prior to 16:48:33 on? 06 /? 08 /? 2014 was not planned.

  And:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you installed Windows 7 Professional before the show?
  2. What is the exact model of your computer number?

  I appreciate your efforts to resolve the issue. Thank you also to provide details on the issue.

  The problem may occur due to device driver damaged or problems with the hard drive.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Remove all external devices connected to the computer except the mouse and keyboard and check the issue.

  If this does not help, then use method 2.

  Method 2:
  As you tried to run the memory test that shows that the memory has no problem, it is possible that the hard drive has some bad sectors, then I suggest you run the disk check and see if it helps.
  Refer to this article:
  Check your hard drive to find errors in Windows 7
  http://support.Microsoft.com/kb/2641432

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I'm unable to connect to a specific web site. Have you tried 3 different browsers and they all say that they are unable to connect. No one else has a problem connecting to the page.

  I tried to use www.findagrave.com for 2 days.  I tried 3 different browsers.  all say that they are unable to connect.  No one else has a problem on this page.  I have no problem to do something else.  Why, throughout this site I can not connect with?   I use it all the time in research.  very aggravating.

  original title: on a web page

  Well, I tried the support page, but I already tried all that.  I did a restore full back to factory settings... still cannot have only one page to load.  I'll call my dsl provider this afternoon.  I don't know what else to do.  I can't communicate with Findagrave.  I don't have a snail mail address but no phone number.  But I don't think that it would be them anyway, if no one else has a problem with this web site.  There must be on my end, don't you think?

  I don't know what to tell you. There is no problem, it's on your side.

  If you care to try it... on the assumption that your user account is damaged.
  Create a different user account with exactly the same type of account > connect to it and see if you can access this Web site.

  Personally, I doubt that will solve anything, since you already restored your computer to factory settings.