PDF print

Similar Questions

• BAD PS/PDF print-out in case of special/on paper size/size measure

  Dear Apple developers Pages

  We hardly found any new SW Version Apple Pages (after Version 4 / 09) EQ. Version 5.6 (2553) turn its PS/PDF-print output in the WRONG way.

  Attention: This SW-error occurs ONLY in the case of paper special/custom size/format.

  IMPORTANT:
  This problem does NOT occur on the old Apple Pages Version 4.x (iWork 09), but this error occurs on the all-new Version of Pages, including Version 5.6 (2553).

  If you please FIX this errors. My customers can't any real Apple Pages SW deployment due to this error; and must still use the "old" Apple Pages Version 4.x

  Please let me as soon as possible. know, when this error is resolved.

  Thank you very much!

  Patrik,

  Use the application menu item Pages v5: provide Feedback Pages to communicate directly with the product Pages v5 team. Apple executives and engineering teams do not participate in this community of public support, users, and we are not Apple employees. And, like you, Apple don't share information, nor ask our opinion about the products.

  I suggest you double check the parameters width and height in the middle of custom paper in the Pages to ensure that the values are not knocked over accidentally. In addition, make sure you have the latest drivers of the sellers of the printer installed that are compatible with the version of Mac OS X on your customers computers.

  I used Pages v5 since it was initially published in 2013. I've never met a scenario where I submit content in portrait layout, and selection of the print/PDF offers orientation reversed, or bad PDF/PS output. I don't remember anyone in this community complaining about this before either.

  I have a document of v5.6.2 of two pages which is letter portrait mode. I change the format of paper in a format customized which lies in a portrait, but much narrower layout. When I PDF/print/export to PDF, the content is in the new provision, and resembles that in v5.6.2 Pages.

• Photosmart 7525e: print error message on the monitor, but PDF print OK

  W10 64 bit Office current with Windows updates.

  HP7525E connected via USB.  Current with updates from HP and exploit the full package of driver HP

  When I click to print a PDF file, I get a message popup Windows that quickly disappears, but the part of the message says «Error printing...» «or ' unable to print on...» ».  But the page prints OK anyway.  I have today when it appeared has clicked to print a Groupon in mode 2-sided but also chose to print only the current "page (and in my opinion, there is only 1 page).  Do not print in color, btw.

  A ran HP Print & doctor Scan that found no problems.

  Do not restart.

  Close the browser (Edge).

  Launch of the new browser and returned to Groupon.

  This time the same groupon (in monochrome) of printing simple face mode or mode 2 faces, that the error did not appear and the PDF printed fine as before.

  I have seen the error several times before but have not been studied.  I know I saw him several times when printing PDF files.  I don't remember if I saw it when you print other things.

  Completely uninstall Acrobat Reader on your system.  Now, go to Adobe and download and install Acrobat Reader DC.  Try now.

• PDF PRINTER

  HP Office Jet printer, model 4620. My questions: what is a printer? Is the 4620 a PDF printer? How to print to a PDF file? I am running the XP operating system.  

  Hello

  Your printer can print PDF files that it prints a normal document of the computer.

  Click on 'File' and then 'print'. This will open a print dialog box, view the different options. Some web browsers and readers to print a button available at the top or bottom of the document without having to open the file menu.

  

  Although I am an employee of HP, I speak for myself and not for HP.

  　

  "Say thank you by clicking on the"

  Congratulations! Blows upward"which is located on the left.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem

  　

  Kind regards

  Ray

• Missing lines in print Outlook calendar, but not with the PDF printer

  Hello

  I bought a HP Officejet 6700 Premium [H711n], but from the beginning, when I print my weekly calendar in Outlook there are missing lines in each nomination.

  My system:

  The system is HP Officejet 6700 Premium (all updates, driver ver: 9.0.0, usbscan.sys worm: 6.1.7600.16385, HPScanTRDrv_OJ6700.dll worm: 25.0.614.0, HPWia2_OJ6700.dll ver: 24.5.276.0), and Windows 7 SP1 32 bit (all updates), as well as Microsoft Outlook 2007 SP3 (all updates). The system is connected to the printer via USB, no WiFi or so.

  My problem:

  When I print my weekly Outlook calendar with my new Officejet, the upper and the bottom lines in all appointments is missing. I did a few small arrows in the photo, to show that appointments block timelines. (see scan & Outlook screenshot).

  

  (a) when I use my printer with Outlook to create a PDF file of my calendar, the exported PDF file is perfect. If I CAN open the PDF file with my Viewer and print calendar with my Officejet page, printing looks like it should look like. (see screenshot)

  

  (b) my old man, but broke a LEXMARK C530DN printer, print the pages of the calendar always correctly.

  My settings:

  Given that I bought and installed the printer a few weeks ago, I changes nothing on the HP driver settings. It is plain vanilla. The problem was there from the beginning. I tried once to solve it by changing the quality of "normal" to "optimal", but it did not help, so I put it back.

  Other printing problems:

  No, everything worked except the Outlook calendar printing.

  According to me, these are enough detail to reproduce the issue easily.

  Any idea outside workaround with my pdf printer? Maybe there something wrong with the driver HP itself? (Just an idea...)

  Best regards

  Michael

  Hi Raysy,

  Still having problems?  The suggestions helped?

  Kind regards

• Cannot get the Adobe PDf printer to run on windows 7-64 bit

  Has anyone solved how do the Adobe PDf printer in windows 7-64 bit. During the installation it aligns it with LPT1 printer port. other discussions/solutions, it was suggested to add new printer with port existing use: Documents\ * .pdf (Adobe PDF) selected.

  This port option does not appear in the list of existing ports well. can someone help with this problem? Thanks to a witness of anomaly. Mike was soon

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• Adobe Professional 8 on Windows 7 Pro, do not install PDF printer

  I've upgraded to Adobe Professional 8 on Windows 7 Pro and noticed that the Adobe PDF printer is not installed. If I install Adobe 7 Pro, he installed the Adobe PDF printer. Someone at - it run in this yet?

  Try to install the latest update for Adobe Acrobat 8.
  There could be some problems with the virtual printer driver and Windows 7 compatibility. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• I am struggling to download ghostscript lite for bullzip pdf printer

  I have opted for a new computer bullzip and uses PDF printer on a daily basis, but seem to fight for download the ghostscript lite to work under Windows 7.  It shows a timeout error after a few seconds.

  Hello

  Ghostscript is an interpreter for the language PostScript (TM). A PostScript interpreter usually takes as input a set of graphics commands. The output is usually a page bitmap which is then sent to an output such as a printer or display device. PostScript is embedded in many printers.

  Reference: http://pages.cs.wisc.edu/~ghost/doc/intro.htm

• Error 429 PDF print with third parties with specific software

  Hi all

  I have problems when trying to print a document with a PDF (Bullzip PDF Printer) printer and also with Microsoft XPS Document Writer, but just at the moment where a specific software.
  The thing is, this software allows you to print two options of the same document: project or public servant, so when you print the project, everything goes well, the problem comes when I try to print the official document, there when the following message appears: "error <429>-component ActiveX cannot create object '
  I think that this problem started when I installed some PDF printers (I tried one suits me more), but now, after you have uninstalled them, I still have this problem.
  I don't have a clue about where to start to fix this, so any help will be much appreciated, because I really need this document very soon.
  Thank you

  Hello Martinez,

  Thank you for your reply, with regard to your questions:
  1. the software is called 'IGIC 420', it is developed by a regional government in Spain, very simple, really.
  2. it does not occur with other software, I've tried, in fact it only occurs with a specific software tool and not with other options.
  I'll try to contact support (if at all).
  Thank you very much
  Adan
  UPDATE: I used an old trick mode, uninstall and install again, now it works. Thank you!

• I have Adobe Acrobat 9 Pro Extender. When I try to convert a Word file to PDF that says that it cannot find the drivers from the Adobe PDF printer and reinstall Adobe Acrobat 9.0. In addition, when I open just the program Acrobat 9 Pro Extender an error m

  I have Adobe Acrobat 9 Pro Extender. When I try to convert a Word file to PDF that says that it cannot find the drivers from the Adobe PDF printer and reinstall Adobe Acrobat 9.0. In addition, when I open just the program Acrobat 9 Pro Extender an error message comes up saying that a part of the Capture 3D plugin has been damaged. I went to customer service and they sent me here. Please tell me that this is not another race. I'm running out of patience! I have 10 window.

  Acrobat 9 is quite old and not longer supported. The last Windows OS that could use Acrobat 9 has Windows 7 and Acrobat had to have all updates applied.

  You need to upgrade to Acrobat DC.

• PCL file sent to the Adobe PDF print driver

  After you install Adobe Acrobat DC, the Adobe PDF printer is created in devices and printers, but when I sent a PCL file to the Adobe PDF printer, nothing happens. Is there a plugin available to the Adobe PDF printer manage inputs for the PCL file?

  Thank you

  Mike

  No, it's a PostScript printer driver and the back-end (Acrobat Distiller) converts only PostScript to PDF. Adobe have no any PCL to PDF Converter.

• WARNING 20225. Adobe Acrobat7.0 failed to create a new item. Adobe PDF Port / printer. The Adobe PDF printer may be unavailable.

  Try installing Adobe Acrobat Version 7.0 on a new PC running Windows 7. Get the error message-

  "Attention 20225. Adobe Acrobat7.0 failed to create a new item. Adobe PDF Port / printer. The Adobe PDF printer may be unavailable."

  any help appreciated

  On behalf of Adobe, no version of Acrobat before 8.1 is completely installable or useable on any version of Windows beyond Windows XP. There are fundamental differences in the way that the Adobe PDF printer is installed and accessible on later (1) Windows Vista and/or (2) 64 - bit versions of Windows. In addition, Acrobat 7 coordinates with all recent versions of all Microsoft Office applications. You need Acrobat DC licenses at this stage.

  -Dov

• I deleted my Virtual PDF printer from adobe

  I have deleted my virtual Adobe PDF printer (in the preferences panel) and can't produce, plus 1.3 certified with software like word, PDF, open office, excel, or another that I reinstalled Adobe Acrobat DC and is not recreate a virtual printer. Please help me!

  Run a repair Installation in the Help menu of Acrobat.

• Export PDF printing from InDesign CS5

  Until last week, when exporting an InDesign CS5 document in PDF format, it was a choice of Print or Interactive. Now, there is no other choice and it assumes that the PDF is Interactive and gives to think I have change the color mode to my RGB document, which I won't do. Help!

  If the PDF (Print) option is missing file type form the drop-down list in the dialog box, see 101 troubleshooting: replace, or 'trash' preferences