PDF with hidden text readable in the drive, but not acrobat?

Similar Questions

• Stitching (?) Visible lines in the ID and the drive, but not Acrobat.

  I'm new to InDesign and found some answers here about the wrinkles around the frames. So then I used the export to PDF (5.0 or higher) instead of print to PDF. This succeeded in eliminating the lines when I have view it in Acrobat, but the lines are still there in Reader (new version). I also see the lines in InDesign, so I don't know if they are sewing lines or not.

  I need a padding around my photos so I use 5 mm race (align inside), full of 'paper' line (CMYK 0,0,0,0). Screenshots below.

  Any help/advice is greatly appreciated!

  See you soon

  Parameters:

  

  RESULTS:

  

  Why not make the smaller frames with any respect?

• Need to replace the drive but not allowing OpenManage not not fault reader must be set to 'offline '.

  Hello

  We hope a quick and easy solution to what I'm procrastinating at the moment.

  Have a server Poweredge 1800 (PERC 4/SC, RAID5) and got a failure on one of the SCSI drives. It's hot and we got the replacement.

  However, OpenManage is not let me put the failed drive to 'offline' so that I can share. I'll choose the option offline in the menu drop down and when running it just empty screens (see photo). Is this a symptom of something not quite right? No problem with other options (blink/unblink).

  If not can I just start in the PERC menu, set the active player in offline mode, swap, set the new drive to rebuild from there?

  Seems to be a split view when I look at other similar questions on other threads in forum, for example, some say that you should just pull the drive and Exchange even without putting off line first.

  Thank you

  Alex

  

  Alex,

  It is possible that you are using an older version of the OMSA or that the controller is out of date.

  With the drive is not going offline. What you can do is to the server once it is off, then remove the disc. Powered with nothing in this niche, the table should show that degraded. Insert the replacement drive and it should start to rebuild.

  Let me know how it goes.

• Text visible in the preview, but not when uploaded.

  I am a mobile site in Muse design.

  The fonts I use come from the Museo Typkit family.

  I have downloaded the site several times during the design process and had no problem with blocks of text or text that appears.

  Yesterday I added a new block of text in a section to post a link to a phone number and now the sections of text are not visible when I upload the site. However, it is visible in the preview of Muse!

  I tried to create text from scratch areas, but they always disappear in this particular section of the site.

  Does anyone know why this is!

  

  The pale gray line is the text box where the text should appear.

  Hi Michael,

  It works fine at my end, please try browser clear cookies/cache and then check. If possible, check this on another device and see how it goes.

  - Abhishek Maurya

• I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results

  I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results to laye

  I answered your question: there is nothing you can do in InDesign. You need to ask in the Acrobat forum I linked.

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• convertxdvd 4 continues to say no disk in the drive, but it isn't what the problem

  ConvertXtoDVD 4 says no disc in the drive, but nothing. Doesn't seem like it is known what the prob may be.

  Hi Tim,.

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You get the message in ConvertXtoDVD 4 which no disc in the drive.

  1. is the limit only to a particular DVD question?

  2. are you able to recognize the DVD without using ConvertXtoDVD 4?

  3 - is the full error message?

  4 did you do changes on the computer before the show?

  I suggest you follow the steps in the site:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• I can't get a wireless connection. It comes up with a message saying that the adapter is not connected.

  Original title: Network card

  The laptop is a series of MSI CX600. I can't get a wireless connection. It comes up with a message saying that the adapter is not connected. The wireless adapter is not displayed next to the ethernet card but appears in the Device Manager and when you click the properties of network adapters listed that they all work normally

  Hello

  1A adapter ever worked?

  2 have you installed the disk supplied with the laptop?

  You can check that the installation of the drivers from here:

  http://www.msi.com/product/NB/CX600.HTML#/?DIV=driver&OS=Win7%2032

• My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect.

  original title: old Hard Drive Access

  I have recently had problems with my pc, I decided that I will buy a new Tower, but I really need to get some files off the old hard drive, I bought and pregnant for the SATA drive out of my old pc. I'm now trying to get the files on my old drive through my laptop. The laptop is running Vista. My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect. When looking at the properties it shows that the majority of the disc is full, only 30 gigs for free the 160 GB drive. I don't understand why I can't access to find one of my old files. Help, please!

  Hello

  ·          These files are encrypted?

  Step 1: Step 1: temporarily disable the security software and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-vist/disable-antivirus-software

  Note: Make sure to allow him to return so that your computer is protected.

  Step 2: Run a check disk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  Why? Most likely because the PDF Viewer on the Tablet is too stupid to deal with show/hide functionality.

  You could try PDF Expert of Readdle on qpdf Notes Pro on Android and iOS devices.

  Depending on how the show/hide was created during the export of InDesign, it can work in viewers. Otherwise, you will need to open PDF files in Acrobat and edit features show/hide something more digests of PDF device viewers.

  BTW, you will encounter the same issues with the PDF display components in web browsers.

  I hope this can help.

• Upgrade to win 10, updated the drive, returned to Win 8.1, now the drive does not

  How can I fix Adobe Reader?  I upgraded to win 10, updated the player to work with Win 10.  Hated win 10, I went back to win 8.1, now the drive does not work and I can't uninstall it.  Said channels can be verified.

  Try to run this tool: Download Adobe Reader and Acrobat tool - Adobe Labs

• I converted a PDF file to word.  Can I change the words, but not the page.  I can't change the margins. If I delete a picture of the page, space where the image is unusable.

  I converted a PDF file to word. Can I change the words, but not the page. I can't change the margins. If I delete a picture of the page, space where the image is unusable.  Can someone help me please? Gary

  Thank you, Gary!

  I appreciate your comments! Start with the basics: Getting Started with ExportPDF

  And here's a more complete step by step (that you already know, but I'll give the full game!):

  1. Sign in to your account on https://cloud.acrobat.com/exportpdf.
  2. Click on PDF files select export.
  3. Click on choose the files on my computer.
  4. Select one or more files and click on choose (you can select multiple files by pressing the Shift or Ctrl key when you click on the file).
  5. To convert to the: menu popup, select the output format you want (in this case, Microsoft Word).
  6. Let the language of the local menu Document configured to English (unless the PDF is in a foreign language).
  7. Click Export to Word. (The name of this button will vary depending on what format you selected in step 5)
  8. Once the file is converted, it will appear at the bottom of the window, listed under exported files.
  9. Hover your mouse over the thumbnail image of the file, and then click the icon that appears on the left side of the thumbnail to download the file in your downloads folder. (You can also click on the files tab in the upper part of the window to see a complete list of all converted files).
  10. Once you have downloaded the file, you can open it up in Word for editing.

  I hope this helps! If this isn't the case, you know where to find me!

  Best,

  Sara

• I want to transfer my files to my external hard drive free windows click on my mac, it recognizes the drive but I can't nothing or see the files. Any help is appreciated

  I need to transfer my files to my external hard drive free windows click on my mac.  I can see the drive but cannot do anything or transfer.  any help is appreciated.

  The drive does not appear in the Finder?  Do you get an icon for it on your desktop?

  You say that it recognizes the drive, how exactly, what is the point?

  What happens when you try to use it?

  How the drive is formatted?  Is it encrypted?