PE2900 RAID 1 GRADIENT, NEED HELP TO REBUILD PHYSICAL DRIVE SHOWS FOREIGN

Similar Questions

• HP-15f039wm: need help to find the driver

  I got lost. need help finding the (USB) Universal Serial Bus controller. would be very grateful for help.

  Hello

  Try the driver on this link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

  Kind regards

  DP - K

• Need help 3d video Controller Driver for Hp 15 - laptop d103tx

  Hi all

  I use Hp 15-d103tx 4th Gen i5 intel laptop with Window 7 64 bit OS.

  I need help reagarding controller driver 3d video. I need this driver. I tried to find on the site official HP, but not found.

  Please send me the link for this driver.

  Thank you

  Sunil

  You are the very welcome, Sunil.

  Try the driver directly from Nvidia...

  http://www.nvidia.com/download/driverResults.aspx/75992/en-us

• I need help finding this hard drive HP

  I'll try to find a second hard drive corresponding to buy for my laptop but I can't find it on the hp website. I have not spent one hour and no luck, geese. in any case, my laptop computer and a hard drive is:

  HP dv7-6c95dx

  750 GB HDD at 5400 RPM with HP ProtectSmart hard drive Protection

  I want to get another hard drive, exactly like the one above, so the two hard drives are a matching pair.

  Then I have to find the special cable for it, yes an another headache. any help would be a great guy, thank you...

  Maintenance & Service dv7 notebook guidehas the information you need. See the list of parts shown for the part number.

  From the Manual:

  Supports the following double hard drive
  configurations:
  ● 2 TB: (1 TB, 5400 RPM, 12.5 mm × 2)
  ● 1500 GB: (750 GB, 7200 RPM, 9.5 mm × 2)
  ● 1500 GB: (750 GB, 5400 RPM, 9.5 mm × 2)
  ● 1 TB: (500 GB, 5400 RPM, 9.5 mm × 2)

  Hard drive (2, 2.5-inch, SATA, does not include support, connection cable, Shield of Mylar or screw):

  1 TB 5400 RPM, 12.7 mm 638974-001
  750 GB, 7200 RPM, 9.5 mm 633252-001
  750 GB, 5400 RPM, 9.5 mm 634250-001
  640 GB, 5400 RPM, 9.5 mm 603785-001
  500 GB, 7200 RPM, 9.5 mm 608218-001
  500 GB, 5400 RPM, 9.5 mm 634932-001
  320 GB, 7200 RPM, 9.5 mm 634862-001
  320 GB, 5400 RPM, 9.5 mm 622643-001

  Hard disk hardware kit (not shown, includes support, connector cable, Mylar)
  Shield and screws) 665597-001

  You can order parts by parts HP online store. You can save some money by ordering identical pieces from another provider online.

• Qosmio G20-139: need help with 2nd HARD drive installation

  Hey fans of tosh.

  I got a Qosmio G20-139 and I want to install 2nd HARD drive. How can I go about it? I don't want to mirror the 1st HARD drive I just that it runs as a HDD separated for more storage. How do I set up and format?

  I'm using WXP MCE any help received with gratitude, keep in mind, I'm no expert actually I'm a fool to the village that of been inbreeding so take me through in easy to understand steps that even I can follow.

  Cheers in anticipation

  StevieB

  Hello

  That s just to change the BIOS settings in the BIOS!
  I think that the BIOS settings are placed in the last page of the BIOS (3).

  Try setting the 1RAID-0 on the first HARD disk and the 2RAID-0 the second HARD disk.

  It worked well on my laptop.

  By the way; information on the RAID configuration found in the user manual.

  Have a nice day ;)

• need help to find the driver of fingerprints...

  Hi there: -.

  I need the printer driver finger for hp pavilion dv6-6160ee for 32-bit windows, I changed my window from 64 bit to 32 bit and I found all the drivers does not work, I downloaded all the drivers, but could not find the driver of fingerprints.

  Please someone help me...

  Abdo free

  Hello

  Uninstall any driver and the system fingerprint reader software.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the driver for the fingerprint sensor fingerprint validity here.

  Download and install the latest version of the software from here.

  Restart the system and check the results.

• need help with USB controller driver

  Recently downgraded to windows 8 for windows 7 ultimate, installed all the drivers except that I can't find the driver for the USB controller anywhere. Will not find the drivers automatically on the internet. I guess I have to install the chipset for PC.  Cannot download from the HP Web site because I got demoted. .  .

  Its a HP Pavilion model 500-098 with windows 7 ultimate 32 bit

  Any help would be appreciated

  Thanks for your time, Dale

  You are the very welcome.

  We'll get it to work... you definitely need the driver of the TI USB controller.

  Download, but do not run the file I posted.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-100633-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0002

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the downloaded file and select 7 - Zip option in the list.

  Have 7-Zip extract of: and let it extract the file in the name of the folder (sp55506).

  After 7-zip created the driver folder, go to Device Manager and click on the device of USB controller requiring driver.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and find the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Need help on IOPort.sys driver

  I need to open a program for the school, which requires a driver of IOPort.sys, and the error message indicates that it has not been copied in the system32 folder. I can't find one of these things on my computer. I want to know how to download the driver. I tried searching on google and I can't find anything. I could use all the help I can get.

  Hello

  Contact the program manufacturer support for further assistance on the issue, since the problem is specific to the program.

  Thank you and best regards.

• Need help with replacing a drive on a virtual machine

  Test case for something I need to do on a separate production machine.  Virtual MACHINE is running WinSvr2003.  Only the hard disk assigned to the virtual machine is one of 20 GB disk, C: using this.  Need to C: to be larger.  Add a 40 GB drive to the configuration of the VM in the CR.  Started an iso BartPE with plug-in in Ghost.  Ghost can copy the C: 20 GB drive on the 40 GB drive.  Went in the VM config and changed is the 40 GB SCSI 0.1 drive and the drive of 20 GB at SCSI0, 2.  After I saved, VMware changed the 40 GB on disk 1 and the 20 GB on disk 2.  Went it into the BIOS on the machine config to boot the disk of 40 GB.  But no matter how I put it in the BIOS, it would only start on the 20 GB drive.  Went in the VM config and removed the 20 GB drive (which is not an option on the production machine, it has a volume of data on the same drive).  It boots to Windows, so I guess it's start on the 40 GB drive.  But I am unable to connect to it.  It shows that the application of settings, record the settings, then back to the login screen, all within 2 seconds approximately.

  Is there anything else I need to do to (1) move the volume from the Windows system to a new disk w without side effects in Windows and (2) so that it can start on the new disk correctly?

  If it is a single virtual drive with 2 partitions and the C:\ is on the front of the drive, Extpart won't help. It is usually best to separate the partitions to multiple virtual disks. I use the converter to V2V the VM and move on their own virtual disk partitions, then develop them if necessary.

• Need help to add hard drives

  So here's what I have... Windows 7 - & gt; VMware Server 2.0 - & gt; Windows Home Server virtual machine

  Trying to add additional hard disks, see just plugged and windows 7 (host), but when I try to add a drive to the virtual computer it shows me only the available pool from the original hard drive... Im sure that I add these drives to the host via the applet web but just can't figure out how? If anyone can help... thx!

  Looks like you need to add a new data store to take advantage of the space on these new readers. Ensure that any data store that you add is available when the VMware services beginning, like at the start, especially if you have virtual computers autostart stored on them.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Need help to update a driver

  Anyone with the ability to build the current drivers of ESXi ready to make a change by Intel drivers igx monotube (hopefully) add support for a new network card Intel?

  I'm ready to post if anyone can help is the amendment.

  If the PCI id is not in the file sample.map by default, then you will need create the file oem.tgz with simple.map, pci.ids and igb.o.

• Satellite C660 psc0se - need help to find a driver

  I have a problem to find this driver
  [http://dc14.arabsh.com/i/03562/iapbxtj76qk5.jpg]

  It is the system
  [http://dc14.arabsh.com/i/03562/alm8yjqi2fw5.jpg]

  and it's the display
  [http://dc14.arabsh.com/i/03562/ajjjh7hp4fik.jpg]

  _AND is the model: _
  satellite c660
  _AND's short model number: ______
  psc0se
  the laptop is toshiba

  Please help me

  Can you please try to identify the device by following the instructions on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78?

• Old laptop - Pro 490 - need help with the graphics driver for Win 98

  I downloaded the display drivers, but these seem to be the same ones that Windows 98 is installed but the screen is not 'full' but just a window in the middle of the screen.

  I have also 1 device that does not have a pilot.

  Is someone can you please tell me where I can get a set of drivers for the laptop? Win98SE drivers seem to be a little short on the toshiba web site (unless I'm blind)

  Otherwise I'll have to use the recovery CD to install windows 95 and then upgrade to windows 98... do not look forward to that.

  Any help greatly appreciated

  Hello

  In my view, the drivers for Win98 and Win 98SE are the same.
  But this unit is very old and Toshiba doesn't conceive these drivers more.
  I suggest to look on the sites of manufacturers of equipment. Maybe you'll find some drivers for Win98

  Concerning

• Need help to find the driver for my Satellite C660 WLAN - 1 H 6

  I can't find this software please help.

  Atheros AR5B95 LAN wireless 802.11 a/b/g/n controller

  This is a laptop: Toshiba Satellite C660 - 1 h 6

  Hello

  All WLAN drivers, you can find and download from the Toshiba WLAN http://aps2.toshiba-tro.de/wlan/ Portal

  Simply download and install driver Atheros for operating system you are using.