Pen does not charge what be it; iPad or via usb.  any suggestions?

Similar Questions

• CHK DSK/r & CHK DSK/p does not solve blue screen UNMOUNTABLE BOOT VOLUME... any suggestions?

  Hi, need help please. After an update of windows, there was a couple of error message on my computer, and then one day, he came with a blue screen at the beginning by saying "UNMOUNTABLE BOOT VOLUME". OK, I googled and he said everywhere to have an installation CD (which I have) and then perform the CHK DSK/r, CHK DSK/p or CHK DSK/r/p that I did all 3. Then I typed in FIXBOOT c:... ok, well... seemed so I typed in the output. Blue screen again! He tried again and again without success. I would NOT be this format... we have a lot of customer files on this computer... ANYTHING else out there to try? I can't find any other information. Any help would be GREATLY appreciated. Thank you...!

  Hello - there was only 1 partition, and I think I know what it was. It was see the external hard drive - which I NOT formatted and works very well - and now that I have disconnected, he says "hard drive not found '. Now, I can not format the main computer! Should I rehook it? I just don't want this external hard drive to be formatted. How to format my computer (since CHK DSK does not work) with the CD? I just get the message 'cannot see the hard drive. Thanks for your help.

  N ° not re - hang. In fact, you must disconnect all devices from the computer except for your keyboard and your mouse. This includes, but is not limited to, your printer, card readers or other devices other than your cd rom of course media.

  The error you receive is probably due to your SATA controller driver is not being installed. Restart the computer and enter the bios. See if you can find the option to disable the AHCI or RAID and IDE SATA (SATA/PATA) emulation mode. Windows should detect your hard drive.

  Finally, if you are unable to find the option to turn off the AHCI/RAID mode, provide me the full brand and the model number of your computer.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• iPhone not charging when connected to the computer via USB

  Original title:

  I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

  Hello

  1. are you facing problems with USB devices?

  2. that you get an error? If Yes, what is the exact error message?

  3. is your phone detected in iTunes?

  4. doesn't Windows detect the iPhone as storage medium?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to plug it into a different USB port and verification.

  Method 3:

  Check out the following link.

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  I hope this helps.

• Windows 7 does not recognize my external hard drive connected via USB

  I checked the site and there is no drivers for the hard disk. He claims that it is plug ' n play.
  The make and model is Coolmax and model HD-389-U2.

  Please help me solve this problem. I have registered here very important files that I need!

  E-mail address is removed from the privacy *.

  -Nick

  I'm sorry, but we have been wasting time looking at the Device Manager and disk management when the computer doesn't even know that you have connected an external drive.

  Try another USB cable.  Try a different USB port.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• iPad Pro does not charge

  My iPad Pro (10.0.2) says not charging when connected to the nearest 4th USB port of lightning on my iMac OSX end 2015 10.11.6. Another thing that I connect it works so there is nothing wrong with this port.

  However, my iPad charges when it is connected to the other 3 USB ports. Tried other Apple cables, restarted my iMac and reset my iPad.

  Basically, it's not the iPad, and it's not USB port cuz that they both work when plugged in with something else. It's just the 2 at the same time with the other who do not work.

  I'm so confused. Does anyone else have this problem?

  Hello. It seems that the charge voltage/current monitoring software has been changed in iOS 10. It is much more sensitive. Your device's charge when says "do not load", but he is in charge, probably faster when it shows the Flash. See the iPad is cool the computer after an upgrade to iOS 10 batches of a discussion of this issue.

• MacBook Pro (2014) does not charge despite an orange light when plugged

  Hello

  So my 2 year old Macbook Pro (retina) does not load when it is plugged in - spite, projecting the orange light. I have a battery (20%) and it is reduced whenever I use it and will be soon drained.

  Some of the things I've tried

  -Reset SMC - tried but no change after

  -When I use the mac when it is plugged in the battery icon in the top bar done see the support - but there is no increase in % of the battery. Continuous use it starts to fall.

  -During use (and what battery is plugged) - I checked the report system (about this Mac section) - in the energy sector - it is said does not charge (despite being connected, the orange light and the symbol in the top bar)

  What do you think guys that it is? MLB? Battery?

  What I have to replace or can it be fixed?

  If you have the Apple store, take the machine evaluation.  There is no charge for this, but you need an appointment.   The first thing I would check would be the cable.  You have another machine to test this with.

• iPhone 6 s so that cable does not charge the iphone 128G 6 +.

  my iphone 6s longer cable does not charge my phone. an error comes up saying my cable or accessory is not certified. I rebooted several times but still the same. What should I do?

  Try a different cable

  If one giving you trouble was originally an Apple accessory - he bring an Apple store or Center authorized service

• Satellite L655 new battery does not charge

  Satellite L655 new battery does not charge

  Hello halik

  It is not easy to say what the problem is here.
  Purchased new and original Toshiba battery with the same part number (model number).

  New battery is recognized by the system?

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• The toe does not work on iphones and ipads

  I created a site on Adobe Muse and the pinch to zoom feature does not work on iphone or iPad, but it does not work on androids. What I am doing wrong?

  Muse expects and allows you to design and build mobile layouts appropriate, so that your visitors will see a more appropriate site. In fact, Google is also to give these sites for a better position in their search results. Some tablet Android phones could not "reveal" or behave as a mobile device, so that they sort of get away with it...

• Powerbeats does not charge flashing red

  Powerbeats does not charge flashing red

  Hi gmalasy,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your Beats headphones. If you have problems to load your Powerbeats, you can find information and the link in the following article useful:

  Charge your headphones wireless Powerbeats2 - Apple Support

  Concerning

• Mail does not completely download on my iPad Air.

  e-mails individual does not full download on my iPad Air.

  How do you mean? In the settings you can enable or disable to load remote images... which, in many cases, if you get a mail from bed, bath and beyond, say, their marketing emails are mostly a picture, and if you need to load remote images you will not get the image, just the words.

  If it's something else maybe if you gave some details that might be useful

• Satellite L655-13V - battery does not charge

  I have laptop Satellite L655-13V and the battery does not charge while I plugged the AC/DC adapter.
  and give me this status: "plugged in, not charging."
  And when I connect the battery only work on computer, and when I connect the AC/DC adapter only without battery the computer works also.

  But when I connect the battery and plugged to the AC/DC battery adapter not charging and give me this status: "plugged in, does not support".

  Please, help me to overcome this problem.

  Hello

  Leave the AC adapter plugged into the laptop for a longer period of time.
  In many cases, the battery may not start to demand immediately, as his deeply discharged.
  In this case the adapter must be connected to the laptop for a long period of precharge the battery, then the battery should start loading as usual.

• iTunes does not charge enough when synced to my car

  iTunes does not charge enough when synced to my car

  This forum is for the application of music notes... This is the wrong forum for your question.