People probably think that my answers are boring
Whenever I reply to a thread after that who knows we're going on anymore. I see a bunch of sansafinders in the last section of response on this forum that goes back to a week ago. I guess that my eyesight has begun to make everyone bored of my messages. I don't think anyone will respond to this message in any case.
sansafinder wrote:
Whenever I reply to a thread after that who knows we're going on anymore.
Look at it this way... you have the "last word" on plenty of conversations or discussions.
Oh and good luck delete this thread... you can delete a message if no one responded to it. Only the Admin & Mod have privilege ths. And a good thing too; people would be deleting stuff in every sense, if they could.
Tags: SanDisk Products
Similar Questions
-
are send you emails to people to check that hotmail account are always used
Are send you emails to people to check that hotmail account are still used as I received one today to ask my name, username and password.
This site not connect to Microsoft personnel.
However, it is probably a scam.
http://www.Microsoft.com/security/online-privacy/msName.aspx
-
Im having a problem with your security software. Your data bass must be bad, now I can't have spent my address question. Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect
Hello Bernard,.
You sign a document that has authentication based on knowledge, applied in it? If so, and if you can't go to questions, then you will need to contact the sender of the document because they can remove it and return you the document. You can respond directly to the e-mail received esign and happens directly from the sender.
Kind regards
-Usman
-
Do you think that these indices are performance-based?
Do you think that these indices (in the following definition) are performance-based?
CREATE TABLE current_inventory ( warehouse_id NUMBER , warehouse_region VARCHAR2(2) , product_id NUMBER , product_category VARCHAR2(12) , amount_in_stock NUMBER , unit_of_shipping VARCHAR2(20) , products_per_unit NUMBER , last_updated DATE ) PARTITION BY LIST (warehouse_region) SUBPARTITION BY LIST (product_category) SUBPARTITION TEMPLATE ( SUBPARTITION perishable VALUES ('DAIRY','PRODUCE','MEAT','BREAD') , SUBPARTITION non_perishable VALUES ('CANNED','PACKAGED') , SUBPARTITION durable VALUES ('TOYS','KITCHENWARE') ) ( PARTITION p_northwest VALUES ('OR', 'WA') , PARTITION p_southwest VALUES ('AZ', 'UT', 'NM') , PARTITION p_northeast VALUES ('NY', 'VM', 'NJ') , PARTITION p_southeast VALUES ('FL', 'GA') , PARTITION p_northcentral VALUES ('SD', 'WI') , PARTITION p_southcentral VALUES ('OK', 'TX') ); CREATE INDEX warehouse_id_ix ON current_inventory(warehouse_id) LOCAL PARALLEL NOLOGGING; CREATE INDEX product_id_ix ON current_inventory(product_id) LOCAL PARALLEL NOLOGGING;
It depends on the type of your request.
If the application is OLTP, I think that these indices are not good performance because these indices are not pre-fixed clues. Indices non prefixed are not suitable for OLTP.
If your application is DSS, these indices are appropriate. -
I have 3 or 4 different groups who send an email to a place and time of meeting, and all I get is the enamel, which his and the subject. I know that its going to be a meeting, but never the time, date or place of the meeting. Others told me they get the tabs to say yes or no to their participation in the etc, but I get nothing? What I am doing wrong? Thank you
38.0.5's not out yet...
If your trying to install Thunderbird Add-on menu as I said then you will not get the error from Firefox because your not not using a browser at all.
So lets start using Thunderbird and Firefox is completely closed. If you use the browser open to see anything or download anything you do it wrong.
-
My iPhone randomly started thinking my headphones are plugged when they are not. As a result, it won't play music or message/call alert through the speakers. What should I do?
Try to push the helmet a few times to move the switch. If not, then please post something here and I'll be happy to help you further.
AppleMan
-
Hello, my Windows 10 computer crashed, and I had to start again, allow a reinstallation of the operating system complete with all my apps being deleted from the machine. One of these applications was LR6 (independent, no CC). In my view, LR6 allows two installations of the software by license, so I am writing to ask that the 'meter' installation reset 'one' when I'm done with this installation. I would never need the re-install second, but given the instability of the operating system, it may be necessary... Thank you.
Jim Clay
Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations
If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server
-
I can't see the starting grid, can someone help me?
Reference grid appear not so hidden on the view menu, if you are using the preview or preview overprinting or are zoomed out beyond the threshold value set.
-
post an excerpt from your code so we can see what you have so far.
I think that what you are looking for is:
var doc = app.activeDocument; var fileName = doc.name.substr(0,doc.name.lastIndexOf('.')) + "_dispro.pdf"; //extract file name and add dispro var myFolder = Folder("/C/new"); //Folder to save to var myFile = new File(myFolder +"/"+ fileName); //Full File Path saveFileToPDF(myFile); function saveFileToPDF(myFile){ //Setup Save Options for PDF var saveOpts = new PDFSaveOptions(); saveOpts.compatability = PDFCompatibility.ACROBAT6; //upped this to ACROBAT6, was at ACROBAT5 saveOpts.generateThumbnails = true; saveOpts.preserveEditability = true; // var originalInteractionLevel = userInteractionLevel; //save the current user interaction level userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS; //Set user interaction level to suppress alerts doc.saveAs(myFile,saveOpts); //Save File userInteractionLevel = originalInteractionLevel; //Set user interaction level back to original settings }
-
I think that there are pedophiles on Skype
I was attached to a discussion group with all these other contacts who are not my contacts. They live in different countries but I'm interested, I'm 19 years old and thought, they would all be my age, then I discovered that some of them are aged 11 and there are people my age and more who have sent these children gifts etc. in Exchange for pictures, cam chat ect. It was what these people told me and I really think that someone who knows what to do, to take a look at my account, or the discussion group or something to see what's going on and stop it
https://support.Skype.com/en/FAQ/FA34447/what-should-i-do-if-i-see-abusive-behavior-on-Skype
TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest version of Skype: Windows & Mac
If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you. -
Lenovo E440 microphones reversed? I think that the left and right are wrong
Hi, I have E440 i5 8 GB Windows 10 to date and version of driver Conexant 20751 SmartAudio HD 8.66.16.50. I clicked on "update driver" and came to is that it is the most recent version.
In the settings of the card, I enabled 'hear this device' and position normal when you look at the screen and your hands on the keyboard, if you type the right hole mic I can hear the left audio channel and vice versa for the left. Is this normal? Try with your laptop. I mean, it would be nice if you want to record something with the laptop back on what you want to record, but I think that most of the people in the land would the laptop screen making in the face of what they want to record, especially if they're going to use the camera and video.
Looked at google but nothing came
Add: I noticed in the properties: configuration of the Microphone, in the 'Options' tab advanced, there in the background 'Improve the Signal' and a checkbox "Enable sound improvements" WHICH I ALWAYS turn OFF and the sound quality is crisp, clear and loud, but the pickups are reversed, now if I select this check box, the sound is really bad miserable, for 256 Kbps 32 Kbps and its going to MONO. Any permeable I scratch, sound comes from the Center, so I would REALLY like that this "activate sound improvements" disabled people, hands down. PD: This option is not even reduce any type of noise, I know it's what he is for, I can still hear my strikes and miners of sounds equally with it enab/disab.
Another thing is: it not "Conexant Audio Setup GUI" nowhere to be seen, I have looked everywhere in the PC, this audio driver just doesn't does not with any audio different installation "Dolby" read and option on the 'enable strengthening its' in the record.
OK, updated, I thought I had won the battle, well, almost, rebooted again and reinstalled my pc the * beep * driver CONEXANT, but found another solution, followed this tutorial
https://blogs.msdn.Microsoft.com/matthew_van_eerde/2010/08/23/troubleshooting-how-to-install-the-MIC...
And recovered the "pilot High Definition" and I think that this time it will stay.
One thing I noticed that the volume icon in the lower right missing, check list "hide icons" and "Volume", it turned on, I am appearing at this time, may try another reboot. -
on Windows pc, I don't see a folder 'My Photo Stream', I think that all the photos are in the download folder, but when remove it from there, the status is not replicated in icloud. Help, please.
Hi vibenas,
If you plan to use iCloud photo library with your Windows PC, article below the setting Details link and use this feature.
Set up and use iCloud photo library on your Windows PC
https://support.Apple.com/en-us/HT205323Sincerely
-
disconect ps3 of blank media
I gave a friend my password and I think that he abuses my downloads are slow, how can I stop this
Hello
· What operating system is installed on the computer?
· What browser do you use to download?
Method 1: If you use Internet Explorer, then you can try the steps from the link below and check if it helps:
Internet Explorer is slow? 5 things to try
Method 2: I would say as you reset the password and check to see if it helps:
What is WPA security network key/password for my wireless router?
How to change the wireless network password
You can also post your query on Virgin Media forum for additional help:
-
Windows Vista Home Premium with engraver of CD/DVD to iTunes
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Creative cloud thinks that my area is Bhutan
Creative cloud thinks that my area is Bhutan instead of Turkey, so I can't buy all the plans. I changed my region, it still does not work.
If your Adobe ID shows the wrong country, please also read:
FAQ: How can I change the country associated with my Adobe ID?
partners:
Maybe you are looking for
-
Why I can't import exported TB LiveMail files?
Just installed TB b/c LiveMail stop working (was in constant send mode). Set up TB and can get and send messages to the server. Restarted. LiveMail is now working... Exported "all." Back to TB, I can't import. Process seems to be stuck after choosing
-
Network faulty adapter - WiFi issues
Dear Sir.Suddenly my adapter wireless intel 2200 BG on a tecra M2 1 .8GHz refuses to connect to a network: normally I know how to create a wireless network without problem but now when the configuration is allright (as a test, I used my dell on the n
-
Problem checking e-mail and text messaging addresses
I use these two applications Apple Mail and iMessaging - when I start typing a name, I get a circle of rainbow-colored that delays which bears the name of the person I am trying to contact. Is this a virus?
-
play memories for Samsung galaxy 3 gti 9300
Hi, bought the AS15 HDR at SonyStyle NY wants to download the app game memories for Samsung galaxy 3 gti 9300. It is not supported?
-
I receive emails fine but could not be sent due to the error id: ox8ccc0003. This happened only after I downloaded windows live essentials The problem disappeared, I don't know why.