Percentages vs scenarios

Similar Questions

• 6 iOS10 incorrect percentage battery iPhone

  On my 6 running latest iOS iPhone 10 (10.0.1) my battery indicator in percentage is incorrect most of the time. I can't tell if the percentage indicator is stuck or something. This happened 9 w/IOS, but seems aggravated with iOS 10. Here are two typical scenarios:

  1. indicator indicates the value > 50%, but then stops

  2. indicator indicates the value ~ 10%, but then when it is plugged in charge indicator of cable past at 30%.

  I see that when people are complaining about this preliminary response was to "upgrade to iOS 9.3 +'-well, which obviously does not work for me." I would like to have an indicator that represents the amount of battery life I have left.

  Bart Taylor wrote:

  On my 6 running latest iOS iPhone 10 (10.0.1) my battery indicator in percentage is incorrect most of the time. I can't tell if the percentage indicator is stuck or something. This happened 9 w/IOS, but seems aggravated with iOS 10. Here are two typical scenarios:

  1. indicator indicates the value > 50%, but then stops

  2. indicator indicates the value ~ 10%, but then when it is plugged in charge indicator of cable past at 30%.

  I see that when people are complaining about this preliminary response was to "upgrade to iOS 9.3 +'-well, which obviously does not work for me." I would like to have an indicator that represents the amount of battery life I have left.

  http://www.Apple.com/batteries/maximizing-performance/

• I phone battery on iOS 9.2 6 percentage

  I've heard say that Apple is looking at a bug for I Phone s 6 and 6SPlus and battery percentage "stuck" or do not read correctly...

  But I'm having this problem on my I Phone 6.

  The scenarios I've experienced:

  The percentage will read 100% for hours after removing the charger...

  or it will NOT show a full charge when I remove the charger in the morning, as the 'auto adjust' to 100% if I turn it off.

  SO thought I would ask the question that is happening I have 6 phone as well.

  Someone else with an I Phone 6 and readings of percentage of battery which are bad?

  I also have this problem but I have a 6 s iPhone, I did have more than a month. Mine also might just shut-off valve on its own because the battery life probably cause drains I would also like to know why this is happening is a boring

• Forms - calculation of percentages are based on the percentages of parent in a tree structure

  Hello

  We have a scenario where we build a tree using a standard package available in oracle forms when new block and fill a tree structure of multi Instance.

  The block is based on a single table.

  The tree is is filled. The problem is with the percentage calculations. As the percentage of the child dependent parent

  PERCENTAGE of PARENT- CHILD LEVEL

  1                101                       0                                 45

  1                102                      0                                  35

  1                103                      0                                   30

  2 201 101 PERCENTAGE OF PARENTS 101

  2 202 101 PERCENTAGE OF PARENTS 101

  2 203 102 PERCENTAGE OF PARENTS 102

  2 204 102 PERCENTAGE OF PARENTS 102

  3 301 201 PERCENTAGE OF PARENTS 201

  You can get the percentages to level 2, level 3.

  I was wondering how this can be done in oracle forms... for example... .to child 201, is the percentage of the 101 level... but level 101 is also filled in the buffer of the block as well as all Level1s...

  All entries are appreciated.

  Thanks and greetings

  S

  The solution me. Idea is to use the 'Post' at the time be called in a loop. Then POST will write in the validation of the database but strict.

  The idea is that at the time of execution, we would be able to select "Not ENGAGED" current session data in the database and use it more for treatment.

  Concerning

  S

• Unable to see the value of elimination in the Budget scenario

  I'm having a problem with the Consolidation of the 'Budget' of my application scenario. The PIC are not eliminated and < entity currency > value of each PEAK is roll up to the parent. Consolidation works very well for the scenario of 'real '; PKI eliminations are correct and do not affect the value of < entity currency > of the current parent, and I can see values in [disposal], while there is no data (#Missing/0) in [removal] for the scenario of 'Budget '. The parameters are the same in both scenarios:

  DefaultFreq: BAT

  DefaultView: CDA

  ZeroViewForNonadj: CDA

  ZeroViewForAdj: CDA

  [ConsolidateYTD:]

  DefFreqForICTrans: CDA

  Consolidation rules are enabled in the settings of the application. Here are the elimination of Sub rule:

  Void StandardElim (strAccount, PKI, PCon)

  '==============================

  ' ELIMINATION STANDARD =

  '==============================

  "Start by assuming that we will do an elimination

  CanEliminate = TRUE

  "There are four criteria that need to be passed to the elim

  '------------------------------------------------------------------------

  If PIC = "[ICP no]" then

  CanEliminate = FALSE

  ElseIf (HS. Account.IsICP (strAccount) = FALSE) then

  CanEliminate = FALSE

  ElseIf HS. Account.PlugAcct (strAccount) = "" then

  CanEliminate = FALSE

  ElseIf (HS. PARENT. ISDESCENDANT (HS. PARENT. (Member, PKI) = FALSE) then

  CanEliminate = FALSE

  End If

  '------------------------------------------------------------------------

  "If you spend them four tests do the elim

  If CanEliminate then

  HS = strPlug. Account.PlugAcct (strAccount)

  dial the HS. Con("V#[Elimination]",-1*PCon,"")

  dial the HS. Con ("V #[disposal].") ("" "A #" & strPlug, PCon, ' ")

  End If

  End Sub

  This subroutine is called in the part Consolidate() of the rules file:

  Dial the HS. Con ("", PCon, "" ")

  Call StandardElim (Account, PKI, PCon)

  And the PCon variable is:

  HS = PCon. Node.PCon("")

  I tried to change it so it would use 'Real' consolidated percentage [PCON] balance scenarios, although this was unnecessary because property data are the same for both scenarios.

  HS = PCon. Node.PCon ("S #Actual")

  I tried all different types of POV in my grid of codification. Nothing. From my understanding, the scenario is a dimension of the page and should not be specified in the rules file to consolidate the Sub () as he pulls from the current point of view.

  I've been at this for a few days and I'm officially stumped.

  Can anyone give me any suggestions?

  Thanks a bunch!

  I actually solved this issue.

  The values of PEAK of the partner entities were missing in the data file for the budget, but were present for the exercise. This is because our planning application do not have a dimension of PKI, so when data is loaded from planning through FDM dimension using the HFM database 'Actual' scenario, the PIC is left blank. Then when the 'Budget' data are sent to HFM for peacebuilding, there is no PEAK value, that's why the intercompany partners do not eliminate the first parent.

  I'm looking for solutions for this problem. An explicit mapping to FDM may not work because we have some entities with multiple partners. We must create a dimension of ICP in the Planning...

• vSphere 5.5 HA percentage based Admission Control Policy

  I wanted to light for some time, and it is better described by a scenario.

  1. I have a 2 host cluster, to make it easy, each host is configured with 32 GB of physical memory

  2. the cluster is configured with Admission Control activated, and the policy is set to percentage of the cluster resources CPU 50% / 50% memory with the idea of reserving half of the ability to support a 1 server failure.

  3. for the sake of argument, let's say there are 10 servers in the cluster, NONE of these servers are using any type of booking for CPU / MEM.

  4. each of these 10 servers is configured for 6 GB memory (6 GB x 10 VM = 60 GB memory affected). For the sake of the argument lets say DRS distributes 5 virtual machines per host, 30 GB per host.

  5. now, in my opinion, Cluster, each of my guests show a % 93% memory used, I have alarms jump in vCenter shouting that memory is low.

  6. Since none of these virtual machines run reservations (cut the CPU and memory) switch on the percentage of capacity. Those numbers are hardly showing a tooth due to default reserves applied, (what happens as 32 Mhz?) Readings for the current ability to failover cluster CPU and memory switch are 98% CPU, memory of 99%. Well above the 50% necessary for CAC to kick in and say STOP FEEDING ON VMs!

  Now that I put on the Foundation, we have allocated 60 on the 64 GB of physical memory to virtual machines and vSphere alarms are declaring 'hey you're Out of memory', however, by using a product such as VeeamOne, he pointed out that each of these 10 VMs are really using only 2 GB memory physical host the 6 GB allocated. If "technically", we are only using 20 GB (10 GB/host) of 64 GB of memory available to the cluster host physical.

  The million dollar question is... if I'm not one of the hosts, all THE virtual machines will come online on the last surviving node?

  Scenario 1:

  Host 1 32 GB of physical memory, 5 VMs, 30 GB of allocated memory, alarms to use 93%

  Host alarms 2 32 GB of physical memory, 5, VMs, 30 GB memory allocated, 93% of use

  1 host fails, HA intervenes, it goes to the State, it cannot power on virtual machines more because it is only 2 remaining GB and I need power over 30 GB of value? (I expect that this is not the case, we should be able to provision...)

  Scenario 2:

  1 32 GB of physical memory to the host, 5 VMs, 30 GB of memory allocated, physical 10 GB used by Veam reported, physical of 20 GB remaining

  The host of 2 32 GB of physical memory, 5, VMs, 30 GB of memory allocated, physical 10 GB used by Veeam one reports, physical of 20 GB remaining

  Welcome 1 fails, HA comes into play, it starts every 5 VMs on host 2 because it has 20 GB remaining physical and needs only 10 GB?

  It seems that there should be a better way to really tell if you can fully support 1 node failure model % with the memory allocated in your cluster-based, anyone can demystify it for me and explain?

  There are several measures that serve to plan capacity. For the record, good or bad, I look at demand and active memory. Also, if I see the balloon flight or in Exchange, I feel its time to add a host (or just memory... it all depends on several other measures). DRS is starting to complain when the hosts are stressed. Right resize VMs from the beginning makes it easier trend and plan additional abilities. There should be no need more allocate as much.

  I also use VROPS in my environment. This is very useful for trends and plan ahead.

• When you draw paths, what percentage of level best to see the image?

  Hello

  When drawing paths in the PS, which is the best level increase percentage to display the image? I find that 200 to 400% is sometimes useful, but sometimes 300% is too big and the edges of my selection become indistinguishable from the background. What are the techniques of zoom percentage that others use all pulling the railways?

  Thank you.

  Patrick

  Patrick, the answer is that it all depends on what you're trying to isolate, how you plan to use and how fast you need to do. I will describe a couple of scenarios.

  If you are knocking out 25 pictures of products, you need to go fast. Some studios will order their retouchers remain with zoom at 50% only. For general color/brightness, no drama, describing changes a form on this scale will be fine. The resulting mask will not be perfect, but it will go faster than the zoom to 100% because you will be with less detail.

  If you need a little more precision, zoom and more. So the question is: where to place the path on the edge of the element you want to isolate.

  If you plan to break the clip from the bottom, then place the path inside the border of the element. As long as you're fairly accurate, the fact that you can cut the edge pixels will be not easy for the Viewer to the end. It's better, because you can trim off the coast, say, clothing fabric in excess and idealize shape more. When hit against a new background, the shape will be better and no one will notice that you have trimmed it anyway.

  If you plan to keep this element in their existing background environment, you have to be more specific. As you say, you could perform a current zoom 100%. I'll generally not much past plu 150% because we always need to take a view of the overall shape, the forest from the trees so to speak. In this case, you'll want to put the path in the pixel areas liminal along the edge - right between where you see the transition of the element edge pixels and the background. If you make dramatic changes hue/lightness, you will need to massage the mask edge later to reduce the edges that appear.

  And don't forget to put a small feather on the resulting mask is always the key.

  Hope that helps, check out my blog if you are interested to learn more about the techniques of cutting, I'll post some in the future.

• Year over year and the period in the period variance / percentage

  Dear all,

  I use Hyperion Planning 11.1.2.3,

  I would create a member (s) rate of growth under the scenario dimension that calculates the following:

  1 variance (value and %) between the first configuration-> and year-1 months

  2 - (value and %) variance between year-> month and year-> month-1

  Please notify.

  Thank you

  Best regards

  Toufik

  Hello

  Assuming you get the variance in real, here's the member formulas, that you can use in the four different scenarios:

  Variance of the sum:

  @VAR (Actual,@PRIOR (Actual,1,@RELATIVE(Years,0)));

  @VAR (Actual,@PRIOR (Actual,1,@RELATIVE(Periods,0)));

  Percentage of Variance:

  @VARPER (Actual,@PRIOR (Actual,1,@RELATIVE(Years,0)));

  @VARPER (Actual,@PRIOR (Actual,1,@RELATIVE(Periods,0)));

  See you soon,.

  Alp

• Another feature percentage breakdown Question

  Our users have complained to me that our failures % do not work properly. So the installer the following test data: I have two card materials that I have completed all the fields in the % of failures with two components of each. The hardware specifications are entered at a single formula and I have now four components in the % of distribution of material production. I also have details of the wording % and the total solids.
  
  What I don't have is:
  the Description, country of origin (all components have the same selected COO), is in line with (Yes, all four components have the same value of selected positive compliance) and the selected function.
  All these values are entered on the specifications of the original material, display in the basic formula of entry, but do not carry forward to the hardware specifications of output. There is that one step of the process so no internal card is created and the outupt has the external product value.
  
  Are there settings that brings these elements forward in the % ventilation rollup?
  Or is there a user manual which describes which parameters are necessary for the formulation of put these ventilation % rolled up on the release of material?

  Unfortunately, these values are not calculated/wound at the level of the component. The only values roll up to the level of the component are the percentage of the composition, moisture and 6.1.1 tags. Answers with, fields COO and the ventilation function are there for data capture purposes only. Historically, they were placed there to cover the scenarios of faults unique to food service level and use cases of MDD. There are patterns to hide these columns to avoid confusion of the user. In accordance with 6.1.1 and COO are disabled by default for this reason.

  Conceptually, you can optionally use the following proposes to solve these use cases:
  1. available 6.0 or superior, consistent with the values are stored and calculated at the hardware level. If you need to store level hardware specification and then those will roll to the top of your attributes of conformity of output.
  2 country of origin can be stored in an attribute extended at the hardware level. 6.1.1 offers an extended calculated text, attribute that you can use to roll these values using a custom dynamic method.
  3 6.1.1 tags can now be used instead of the function, those who will roll up to the level of ventilation components. Depending on your use case, you may also be able to use these tags for consistent values, but at some point you want it catches up with the hardware level for the labelling of the use cases. Then the material, you will want to use our import function from these conforms to the specification of the trade in values. Something to note, tags only supports the concept of positive roll up feature.

  Apart from this, you can always add these attributes to the ventilation manually once you're done designing your form and pushed your final break for production equipment.

  I hope this helps. As always submit any application development you want to see in the system around the composition calculation and compliance to roll up.

• Fault tolerant in consolidation scenarios

  How do people manage fault tolerance in consolidation scenarios? A client can know in advance that they want to use Fault Tolerance on some servers. Obviously, using fault tolerant on a percentage of servers has the potential to affect the number of servers required.

  The Consolidation scenario does not take into account FT AFAIK.

  You manually cover an instance of the virtual machine on ESX hosts as the failure of FT and must ensure that the customer is aware that there is a load CPU and additional network for her.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• iPhone battery percentage 6 stuck

  Hello, I have an iphone 6 purchased from Apple about the release two years ago, never had any problems until this Friday, 10 March 16 when I noticed my battery percentage was is no longer draining after moderate use. He would stay at 100 percent every day and then turns off randomly. I have iOS 10.0.2, have tried to reset, power on/off, restore factory... nothing works! Is someone able to please shed some light on why this might be the case? Google tells me that there was a similar problem earlier this year when those who have no zone defined as auto has encountered a similar problem with the battery percentage being stuck and not up-to-date (i.e. no reflective battery drains with use). I went to settings and noticed that my time zone was not set as automatic. Does anyone else have this same problem and what is the reference for this?

  I'm surprised that factory reset did not fix this problem... help...

  Hello.

  First, plug in your iPhone, let the screen off and do nothing for a long period of time. Leave it plugged in all night while you sleep is perfect for that.

  Then, restart your iPhone by pressing and maintaining the sleep/wake and home buttons.

  You can also try following the suggestions of battery life. Go to settings > farm > find 'Suggestions of battery life.

  In addition, it is preferable to follow the Apple recommendations given in this article http://www.apple.com/batteries/maximizing-performance/

• iPhone battery percentage 6 unreliable

  Hi all! I use an iPhone 6 with the updated iOS (10.0.1 for now). Since iOS 9.3.4, I noticed a lack of reliability of the battery of my iPhone.

  During normal use, the percentage jumps down about 10-15%. If at this time that I plug the battery pops up by about the same percentage. In other cases, the iPhone still for a long period of time even with the battery that may not be true, or it shuts down even if it is not 1%.

  I went to the Genius Bar and the genie made a diagnosis called 'mobile Inspector' who has not revealed something strange. The employee told me to calibrate my battery, follow these steps:

  (1) restore settings (no);

  (2) use the iPhone until it stops;

  (3) leave here 2 hours without connection;

  4) recharge 100% free to use it and leave it there for 2 hours more.

  (5) repeat step 2-4 once.

  I did what she suggests, adding a force restart after point 4.

  The problem is still there. Day before yesterday, the percentage rose from 85% to 90% (without connection) and yesterday he jumped from 40% to 30% and then stayed at 3% for 1 hour.

  I booked a call of support for tonight see what I can do. The iPhone is still covered by the warranty of 2 years Italian.

  I encountered this problem a few months ago. I went to a Genius bar and my iPhone has been replaced. I don't know if genius made the same tool of diagnosis or a closer, but he acknowledged that the problem was due to hardware, perhaps due to the battery connector. They do not have to replace the battery, but gave me a refurbished iPhone.

  Someone at - he seen this problem and found a solution?

  Thank you

  Hello, first try the following general steps. They could help.

  1 reset your iPhone by pressing and holding the sleep/wake and home buttons.

  2 disconnect you from your iCloud account and reconnect again.

  After you do this, look at this article, it will help you set up the iPhone to save your battery http://www.apple.com/batteries/maximizing-performance/

• Find the percentage of double pairs false in five two sets of columns

  The situation is that I have four sets of two related columns, and these four sets are repeated during 17 sheets. They are all checkboxes (essentially and or or), and I've already configured to do a little when one of them is checked.

  What I want to understand, is if it is possible to indicate the percentage of a pair of two time column to be false. I want to compare, over time (represented by worksheets), how each pair of column.

  Here is a screenshot. Currently, I am tagging manually false lines double red, but I would like to than my 18 leaf, which collects information about the rest, to quickly view how each column pair done.

  

  You can count double false according to the following formula:

  = COUNTIFS (A, B, FALSE, FALSE)

  

  Showing maybe some of you could move it from whats on a sheet, view table names, and what is on page 18.

  This will allow us to provide a solution specific to your situation

• Compare two columns and get the percentage of cells that match

  Hello

  I'm looking to take two columns of data from different tables in the same document, which should have a high enough percentage of boxes and have another cell tabulate the corresponding percentage. I can the of seem to figure out how to do this, but it seems really possible.

  Any help is greatly appreciated.

  Thank you!

  

  C1 = A1 = B1

  It's shorthand dethrone select cell C1 and type (or copy and paste it here) the formula:

  = A1 = B1

  Select cell C1, copy

  Select the column C, paste

  Select cell E2, and then type 'TRUE '.

  Select cell E3 and then type "FALSE".

  F2 = COUNTIF ($C, E2)

  F3 = COUNTIF ($C, E3)

  G2 = F2÷SUM(F$2:F$3)

  G3 = F3÷SUM(F$2:F$3)

• Percentage of battery is not when the IPhone works on a charge

  Hello world

  I am new to Apple as a client so still getting used to the phone and it's features.

  I recently bought the Iphone 6 s more and I noticed that when I charge it and it is turned off or turned off it does not show the battery charge or how much the battery has charged as in an Android phone or when you turn off your phone and charge the battery sign appears showing the percentage that the battery is charged.

  P.S I know the battery percentage look something available that only works when the phone is turned on as in when the phone is turned on.

  Would appreciate an insight as to if IPhones as a thumbrule will not display the percentage of battery charge when it is turned off and charged or should I worry?

  Thanks in advance

  Kat (> "o" <)

  If you're in charge, click on the wake up/sleep/power on button to see the percentage below the time.

  You can also turn on

  Settings > Batteries > battery percentage to see the percentage in the upper part of the right status bar.