Performance criteria vs. success criteria?

Similar Questions

• Completion of the framework and the criteria for success in SCORM 2004

  I understand in SCORM 2004 to be able to specify performance criteria and success separately means that I can put a course so that it can be marked as completed without success if a user has taken but had "deferred success" (i.e. failed ) based on views of the slide or quiz status. It helps the instructor to distinguish completion of understanding / superficial deep commitment (assuming that the quiz is properly looking).

  So, I guess if I'm creating a course that is not a quiz, but I would point out if it was completed or not, I only need to define the criteria for completion in CP9. Is that correct, or should I set the end criteria and success to be the same (i.e. x % views of slide)? It might not make much difference, but I would like to know what is recommended.

  TIA

  You should always set these two criteria.  So use slide views would be wise.

• Captivate 9 - LMS completion questions and quiz preferences

  Hello

  Having a nightmare.  I have developed a unique course with simulations.  However I must quiz slides or knowledge check.

  I tried to publish on a settings of SCORM 1.2 LMS System.  Performance criteria I want is a percentage of slide views (70%).

  The course publishes and runs smoothly in our workplace LMS - however - after which crosses the whole of the project and our closing system fails to enroll in courses such as "completed". We get the NE NOT EVALUATED values instead.

  I tried to adjust the performance criteria, even for the "USER ACCESS" minimum but still no joy.

  Does anyone else have this problem?

  Thanks in advance!

  If there is no quiz in the project I just usually put the Quiz > settings for:

  Representation of State = incomplete - pass/fail

  Success/completion criteria = slide views (and game display the percentage to something that is guaranteed to the user)

  Leave quiz went unselected (since there is no quiz.

  Data to report = percentage (which is actually a bit meaningless if there is no quiz)

  In SCORM cloud I always get the achievement and success of this way.

• Using "Include in Quiz" to determine the completion

  Hello

  Well, that's a pretty abstract position. Here's what it is.

  Using of Cp9, I created a 'course' that does not quiz questions. It runs on a LMS system, and I want the LMS in order to return a result ' complete/incomplete.

  Under publication of Captivate settings > Quiz > Reporting, we find (1) achievement benchmarks and success criteria (2). As I understand, our LMS includes the former but not the last.

  As the course contains no quiz question, I could set up reports using views to slide. (User access sets the bar too low.) However, there is a problem being given during the course, participants various choices "branching" and so never visit all slides. I can work around this in two ways by using views of drag:

  1. I can choose 100% and branch of knowledge.

  2. I can indicate a number of slides that is less than or equal to a minimum number of slides that will go to any participant.

  However, both options present problems (on which I will not anymore).

  So I came up with one another (and simple) solution. I would like to ask those who have more experience if they see traps, that I may have missed.

  My solution is as follows. The course is divided into sections, where each section is accessible only after the previous one has been completed. (There is a table of contents, but it is blocked until that the participant fills the course - and then unlocked for review.) On the last page of the last section, there is a next button. This button, I chose "include in the questionnaire. Then, in the publication settings > Quiz > reports > performance criteria, I selected 'good for the Quiz.

  I tested this at various times on cloud of Scorm, and so far he's purring along. I wonder, however, if it wouldn't be a problem hidden here. (A lot of my 'solutions' were found to have such problems, issues that came to light in very specific situations).

  The course is one of a number of courses, and since they all use the same device, a problem here would be a headache.

  Thank you.

  Best regards

  Marvin DuBois

  Hi Marvin,.

  It was exactly the same solution I would (and have) suggested several times in this forum.

• Several lines back from DBAdapter call PL/SQL procedure

  Oracle XE 10g Express Edition
  JDeveloper 11.1.1.2.0
  WebLogic Server 11g
  
  Guys,
  
  I have an Orders table, I need to ask, and pass back from the corresponding lines that meet certain criteria (e.g. status = 'OPEN').
  
  However, rather than to create a DBAdapter using one Type of operation to "perform an operation on a Table / Select", I need to use a Type of operation of "call a stored procedure or function.
  
  So I need the procedure to return all matching rows, rather than on a single line.
  
  I looked to declare parameters of return of the procedure of the following types:
  
  SAVE - is good because it allows me to return the items to the line with their correct data types, but does not satisfy my needs because it only supports the return of a single line.
  
  VARRAY - good because it can contain multiple line items, but not good because it supports only a single line of return and also because all the elements of the VARRAY must be of the same data type.
  
  TABLE - good because it can contain as many lines, but bad, because each line can contain only two elements: the index and the data element.
  
  I think I first set a RECORD (to contain a line) and then define a TABLE with the data element constituting the RECORD, but I found very picky JDeveloper indeed when it comes to data "non-standard" types in the DBAdapter.
  
  My apologies if I'm missing something obvious, but someone can suggest a way to do this?
  
  Thanks in advance.
  
  Published by: user2541290 on February 17, 2010 02:48

  Hi, I was able to create processes that seems to work. My platform is one, but different, but I don't think it's important for your question.

  Here is the PL/SQL code. Just make the adapter Db to call the stored procedure and it returns all the lines!

  Be aware of the possible limitations how manyrows could return in a select! This can have a serious impact on performance.

  Success.
  Jos Baan

  CREATE or REPLACE PACKAGE lab2_multiple_rows IS

  -Author: 801455
  -Creation: 2010-02-18 08:05:52
  -Objective:

  -Public type declarations
  TYPE rrows IS RECORD)
  mutdat DATE,
  HEB VARCHAR2 (20));
  TYPE the trows IS rrows INDEX TABLE DIRECTORY.
  -Statements of public constants

  -The public variable declarations

  -Declarations of function and public procedure
  FUNCTION retrows RETURN trows;

  END lab2_multiple_rows;

  CREATE OR REPLACE PACKAGE BODY lab2_multiple_rows

  -Private type declarations

  -Declarations of private constants

  -Private variable declarations

  -Function and procedure implementations
  FUNCTION retrows trows IS BACK
  lrows trows;
  Directory lidx: = 1;
  BEGIN
  TO rsql IN (SELECT t.* FROM t ORDER BY t.mutdat jba_transactions)
  LOOP
  lrows (lidx) .mutdat: = rsql.mutdat;
  lrows (lidx) .opmerking: = rsql.opmerking;
  lidx: = lidx + 1;
  END LOOP;
  Return (lrows);
  END;

  BEGIN
  -Initialization
  NULL;
  END lab2_multiple_rows;

  Published by: Baan, Jos on February 18, 2010 08:53

• InvokeManager.queryInvokeTargets

  Howdy,

  Is it possible to list all the targets of the invocation, regardless the type mime or uri?

  I tried the passage * / * and nulls in the InvokeManager.queryInvokeTargets function, but it does not work.

  Basically, I need to get all the apps that have registered a bb.action.OPEN or the bb.action.SHARE with their target details in name, icon and invocation. The use case and performance criteria call for questioning the initial targets of the call, until we know what kind of files that we find.

  It is not possible. Specifying * / * in the query search targets that support all types of opening. What you need is a way to discover dynamically than all the targets and their supported mime types. Invocation framework is designed so that you don't need to know who supports what. You simply call and if there is a target, it will be displayed. Otherwise you can gracefully fail or prompt the user accordingly. Indeed, if there is a way to do this, it would break the purpose of the framework of the call at first.

• There is a sample course in the platform called Business communication (sample course). He won't move beyond three module when I'm logged in as long as learner.

  I'm trying to go through the course of the entire sample to get an idea how to build my own. But I can't go beyond this module.

  "There is a sample course in the platform called Business communication (sample course). He won't move beyond three module when I'm logged in as long as learner. »

  

  Hello

  You are looking in the settings of course. You must go to the author > library Module, select the module causing delivers and check performance criteria.

  Kind regards

  MILIN

• Update of a big cube - which is more effective

  Hello

  If I have the choice between having a file in this structure

  Dimension1, Dimension2 Dimension3, Dimension4, Dimension5, Dimension6, Dimension7, given

  Or

  Dimension1, Dimension2 Dimension3, Dimension4, Dimension5, Dimension6, Measure.Member, Measure.Member, Measure.Member

  Which is more efficient for loading a large database in a progressive manner?

  Thanks for your input, 11.1.2.2 version if that makes a difference.

  Robert.

  Is it OSB?

  Assuming Dimension7 is dense, I'd go with the latter on the performance criteria purely because it results in a smaller file.  If you use a header record that you might want to keep in mind that the first is more flexible (in what new measures or renamed can be handled without changing the format of the file and / or rule).

  Much more important is to make sure that you touch a block that once (which can be obtained by sorting the files by the sparse dimensions).

  If it comes to ASO, Dan Pressman presented to the Kscope13 which concerned more efficient file formats for loading in every detail.

  EDIT: in fact, presentation of Dan has addressed both ASO and BSO. I hope that you can see (I don't know if they are still available for non participants).  It's here: http://www.odtug.com/p/do/sd/sid=2829&type=0

• I can't activate the Server execution mode

  I'm 10.11.3 on a mac pro with the version of the app 5.0.15 server OS. I tried to activate the performance with the success mode. I started on the recovery partition to disable the integrity of the system, but still an error message when you try to activate performance mode in the terminal:

  RP-server: ~ Server$ serverinfo - material

  This system is currently running on the server hardware.

  RP-server: ~ Server$ serverinfo - setperfmode TRUE

  ERROR: Server execution Mode could not be changed.

  RP-server: ~ $ Server

  Any idea is appreciated

  Once you have a full backup of the system or another archiving mechanism allowing you to return to your software, try:

  sudo serverinfo - setperfmode TRUE

• Taylor Swift 1989 tour will not play!

  Why will not play around the world of 1989? No matter how long I left to buffering all that I get is a black screen.

  Hello there, hollybackgirl.

  It seems that your iTunes for Windows stops responding or gives a black screen when you try to play the video content with Apple's music featured. The following Knowledge Base article offers some great recommendations for troubleshooting:

  Fix unexpectedly closes or the launch in iTunes for Windows problems

  Before you begin, download and install the latest Windows updates available for your PC, and you ensure that you have the latest version of iTunes.

  Start iTunes in Mode safe

  When you open iTunes in Mode without failure, you isolate the program of any interference caused by plug-ins or scripts not made by Apple. To start iTunes in safe mode, press the Shift and control on your keyboard while you open iTunes.

  You will see a message as iTunes starts which says "iTunes is running in Mode without failure. Visual plug-ins you have installed have been temporarily disabled. »

  If the problem does not occur in Safe Mode, Remove third-party plug-ins.

  Disconnect your computer from the Internet

  Errors by contacting the iTunes Store and other Apple services can sometimes cause problems with startup of iTunes. If you remove the possibility to connect to these services, you can see if these features have problems that must be resolved.

  1. Disconnect your computer from the Internet. For example, Turn off WiFi or unplug your ethernet cable.
  2. Open iTunes.

  If iTunes opens without any problem, update your drivers. If there is still a problem, Contact the Apple Support for a help to isolate errors.

  If there is still a problem, continue below.

  Create a new user account

  Visit the Microsoft Web site to learn how to create new accounts of users for Windows 8, Windows 7, or Windows Vista or Windows XP.

  If you have the same problem in the new user account, go to the systemic issues. If you do not have the same problem, continue to the user's specific questions.

  User-specific questions

  If the problem only occurs in one particular user account:

  Create a new iTunes library to see if the problem occurs in a new library. If you are using a new iTunes Library solves the problem, re-create your old library in your new.
  To return to your original library, close iTunes and then hold down the SHIFT key while you open the program.

  If the problem persists:

  Look for problems with the content files. Audio files can sometimes cause iTunes to quit unexpectedly or stop responding when the program is reading information analysis. To determine which file can cause the problem, follow the steps below:

  1. Quit iTunes.
  2. Navigate to the iTunes folder:
     Windows Vista:C:\users\username\Music\iTunes
     Windows 7 and Windows 8:C:\users\username\My Music\iTunes
  3. Move the file iTunes Library.itl on your desktop.
  4. Open iTunes. Your library will be empty.
  5. Press control and B on your keyboard to open the bar menu of iTunes. Choose file > add folder to library.
  6. Navigate to the folder where your music:
     Windows Vista:C:\users\username\Music\iTunes\iTunes Media

  
  Windows 7 and Windows 8:C:\users\username\My Music\iTunes\iTunes Media
• Choose an artist, album or song to add to the library and drag it into the iTunes window.
• Wait that iTunes to add the item to your library and perform the analysis successfully gapless playback.
• If the search is successful, continue to add songs to your library.
• If there is a problem with one of your files, your problem will reappear once you add it to the library. Is it reappears, repeat these steps, making sure not to add the files that caused the problem.

Systemic issues

1. Find potentially unwanted programs. Malicious software could prevent iTunes to open or shut down unexpectedly. Make sure your security software is up-to-date and scan your system.
2. Try adjusting the settings of your security software. Learn more about how to solve the problems of security software.
3. Make sure that iTunes is installed correctly. Improper installation of iTunes can contribute to a variety of issues. Learn how reinstall iTunes.
4. Update the drivers on your PC. The outdated drivers on your computer can cause iTunes and other applications to behave strangely. Learn how to day the drivers on your computer.

Thank you for being a part of the communities of Apple Support.

See you soon.

• direct digital manufacturing

  Printer: HP Officeject Pro 8500 has

  Scan to network folder:

  Before the firmware update - worked without problem

  After the firmware update - get error "NO INSTALL", printer, HP digital archiving not implemented

  HOW CAN THIS BE REPAIRED?

  Uninstalled programs do not go to the trash, it is only for deleted programs. To be sure, is your printer than A910a model or does the A910g or A910n?

  If I did not properly assume your model, then that could create a problem.

  In addition, in my job, I realized allows you to install the full setting software, not the basic software - this is because the full setting software has a performance rate and success overall higher than the basic software. Be sure to download and install this software.

  What is your operating system?

  Let me know how it goes and I'll get right back with you!

• cannot restore or repair system

  says not enough memory but I'm only using about 54% of my total memory.

  Hi Jeffreyrobwilson,

  Try to increase the size of the shadow copy of volume. Follow the steps below to do so.

  1. click Start and type cmd in the search box.
  2. right click on cmd in the list and select run as administrator.
  3. when the command prompt window opens type: vssadmin list shadowstorage and press enter .
  4. This command gives the full list of the used Shadow Copy storage allocated Shadow copy storage space and Maximum shadow copy storage space.

  You can increase the allocated Shadow copy storage space by executing this command:

  Type: vssadmin resize shadowstorage / on = [drive letter]: / For = [drive letter]: / MaxSize = [add the maximum size] and press enter .

  For example, the command should look like this:

  vssadmin Resize ShadowStorage / For = C: / On = C: / MaxSize = xxGB
  
  If all goes well, you should see a message saying "resized instant storage association successfully. Your ghost of the restoration of the system memory has now been resized".

  You should be able to perform the backup successfully after this procedure.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Hang WUD

  After several weeks of normal operation, Windows Update refuses to communicate with the server.  He did this earlier too, but then he began to work.  No error message - a symbol of loading. Updates are surely available: models of virus MS Essentials are pushed by day.

  No changes were made to the system. Schema was last updated was on 6/19.

  Reset BAT file provided by Shaun Brink on the Windows Seven forum and the convenience store WUD have both been executed.
  Later (we think) Windows Update has been installed. Disk clean up was performed.  Without success.  The verification process can be cancelled without a reboot;  It is permanently blocked.

  Then I restored a disk image of W7 at a point when WUD work properly. It lists a priority update, which would not download. By clicking CHECK UPDATE cycles constantly. This image was created after disabling Windows 10 invite and updates, according to the instructions in the forums.

  Others note that it might take hours or days to 'connect '. This has never been the case in the past. All points above for a problem with the update server. If this is the case, an acknowledgement by MS would be certainly appreciated by the many people affected by the issue.

  It is not to get rid of all the associated victory-10 updates

  And it does not change your update settings to exclude recommended updates from being involved in the important section updates.

  There is no that disable the operating system upgrade.

• Polish language in EX90?

  I have EX90 with the new TC5.1.6 software. I see in the plug EX90 can Polish language support. Unfortunately I can't change the Polish language over http or ssh. If I try to change of Polish language in http menu, after a few seconds selected menu language becomes English. Any suggestions?

  Concerning

  Luke

  Hi Luke,.

  He has been identified as a known issue with TC 5 software. It has been fixed in TC 6. The datasheet does not have the correct information and is corrected.

  Therefore, please wait for the TC 6 version and you should be able to perform the task successfully.

  Thank you

  Saint André
  Telepresence solutions group

• An image of the system will restore Windows 8 on a blank HARD drive?

  Hey everybody,

  I work for a hospital and have to keep sensitive information on my laptop occasionally. Therefore, I would like to wipe my HARD drive a few months so that if my computer is lost or stolen it will be a lot of private information on it.

  However, I do not have a CD with Windows 8 on it (no one seems to give more backup discs). I do an image of the system to use as a back up, but I want to make sure that wiping HARD drive is OK before I do it.

  In short:
  If I have a system image in Windows 8, stored on an external HARD drive, can I restore my operating system of it on my laptop if I completely erase my laptop's HARD drive?

  Hi Michael J Caboose.

  Thanks for posting in the Microsoft Community.

  Yes, it is possible for you to create a system image on an external drive backup and use it later to restore the operating system.

  Windows 8 has a new option file history which will help you to create the system image.

  Select the Recovery option in the file history. Click on the image of the system to create an and select the drive you want to the same backup/create.

  Here are some articles that will help you to perform this task successfully.

  Set up a drive to history file

  How to use the file history

  Note: However before wiping on the hard drive of the laptop, make sure that you have supported the important data on the drive.

  Hope this information helps.

  If you need further assistance, please answer and we will be happy to help you.