Performs a PIX routes packets from one LAN to the same LAN?

Hello

My PIX is the default gateway for my local network.

Can I set up a static route in my 5151E PIX routes the packets of my LAN to another gateway in the same local network?

Thanks in advance

IMHO, it would be better to say:

The PIX performs routing, but it is is not a router. It can offers routing features, but one thing is that the PIX will never allow traffic leaving the same interface it came. This is due to the Adaptive Security algorithm in the PIX.

What about the reverse? Make the default gateway router and assigning a static route all (gateway of last resort) of this router for the PIX. Could be a solution.

Kind regards

Leo

Tags: Cisco Security

Similar Questions

  • Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

    Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

    I'm going to assume that you plan to have wireless devices.

    Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

    Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

    In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

    If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

  • New FF 32.0.2 break from one day to the next. Full disclosure - Cookie Clicker

    I use FF for many things, often many tabs, etc. I picked up clicker cookie a month or two ago. I always left CC running from one day to the next day without any problem until FF update to version 32.0.2 and now I'm back in the morning to find that it is broken down.

    More recent reports of incidents:

    BP-977c17bd-f1fe-4A8A-98e3-773682140919 19/09/14 07:21
    BP-256c08cf-0725-4200-bA1a-fe2b62140918 18/09/14 07:55

    I use very little add on, same theme, that I had for many years, nothing has changed other than the version of FF I know.

    Any help is appreciated!

    Full Disclaimer: Yes, I know that the perils of the performance of my computer all night. Since I always did before upgrading the version of FF, I fear that this time with which these accidents started after this upgrade. Thank you!!!

    Next steps that I took:

    1 recorded progress, tab reloaded.
    2. right click on the page and go to "display information page.
    2.a. Under support, scrolls to find ads (usually flash .swf) and blocked images from these sites.
    2.b. 1 - 2A to repeat several times
    2.c. According to the news page-> permissions, blocked Adobe Flash for just this site.

    The performance so far is upward. We'll see how he holds up the night.

  • Once I reset my battery CMOS from one day to the next. I tried to install my recovery disk this morning and can't get it done

    Once I reset my battery CMOS from one day to the next.  I tried to install my recovery disk this morning and can't get it done.  I kept receiving an error of 100.
    Don't know what to do.
    Are there out there can HELP?

    Please, I beg you!

    Thank you

    Hello

    Would you please ask the same questions more then once in these Forums.

    What you're doing is confusing in these Forums, as nobody else knows what advice are envisaged for you in other responses.

    Other questions, it seems you have an HP computer.

    Here is the information of HP for Vista from recovery to factory settings:

    "Recover Windows Vista operating system using HP Recovery"

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

    Restore the PC to its original state with the recovery discs

    If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.
    NOTE: perform the recovery process by using the custom recovery disk you created can take less than an hour, whilst using the replacement disks ordered directly from HP can take four to six hours and includes several reboots.
    If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.
    Use the recovery discs to restore the PC by following the steps below.
    1. Insert the recovery disc into the optical disc drive and start the computer.
      If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
    2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
    3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
    4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
    5. etc.

    If you are having problems using the HP recovery process, you will need to contact HP, because this is Recovery process HP, not Microsoft.

    Details of HP:

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    You can also try the Forums from the HP Support:

    http://h30434.www3.HP.com/

    See you soon.

  • Why display started moving, as shaking from one side to the other?

    suddenly the screen has started to move from one side to the other, she stop for 2 seconds, and then continue to move, as shaking.

    Hello

    (1) what is the brand and model of your computer?

    (2) remember to make changes to the computer before the show?

    I would suggest trying the following methods and check if it helps.

    Method 1: Troubleshoot monitor and video card

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    Method 2: Flickering of the Correct monitor (refresh rate)

    http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

    I would say as you reset the settings of the monitor to factory settings and check if that helps.

    Please consult the manual of your monitor to perform the steps.

    You can also try to connect an external monitor to the computer to check if the monitor is defective.

    It will be useful.
  • I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

    Hello

    I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

    I use the switch/cat6 cables only the router is capable of 100 Mbps.

    Also, I connect the pc directly with cable and still the same speed.

    Win7 will get more than that and how?

    I read the other posts on this topic, but all patches are not applicable to me.

    I used various cables and switches and PCs in order to eliminate the possibility of a defective unit.

    Can you please help?

    Thank you

    Andreas

    Hello Andreas,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    Forum TechNet Windows 7

    TechNet Windows Server Forum

    Hope this information helps.

  • 'Notes' disappeared from one day to the next

    my "notes" have disappeared from one day to the next. Last accessed last night. Saved on phone appearing with that few, I changed last night. The format has also changed and he no arrow at upper LH has. Anyone who has experienced similar?

    Hello

    If use you iCloud for synchronize your Notes, tap Settings > iCloud then make sure that Notes is toggled ON.

  • Why do you have my emoticons change from one day to the next and how can I get the 'old'?

    The choice of emoticons changed from one day to the next. I would like to have the 'old'. Why Gmail does not send a msg Heads Up? Thank you.

    Hello

    This does not sound like a Firefox problem, but a change that was made to Google for their e-mail service. I recommend that get you in touch with them through the channels of Gmail support and they may be able to help.

  • How to move from one screen to the other applications?

    In order to organize some screens after installing several applications, how can we move them from one screen to the other?
    I found it possible to place them in the bottom bar and then replace them in the necessary form, but it is very slow...
    Another way?

    Also, is it possible to place the apps where we want to and not automatically bring reorganized (empty filled)?
    Thank you

    DUPE: https://support.mozilla.org/en-US/forums/firefox-os-english-forum/709563

  • I'll copy Mozilla firefox from one computer to the other. I don't want to download from the internet, I caught the virus of "Babylon" in this way.

    (1) you really have to make it easier to contact support. Get rid of password requirements!
    (2) I would copy safely Firefox from one computer to the other. I don't want to download from the internet. Really, we love and use firefox. I had to remove firefox because it came with the virus of Babylon.

    If you have been Babylon when you installed Firefox you may have installed it from an authoritative source (the only official place and secure to download Firefox from www.getfirefox.comEast). Please, never download Firefox from anywhere else.

    So, for your computers, be sure to download Firefox from www.getfirefox.comand you download the version official, convenient and safe.

    If you get Babylon on your computer, you can remove it easily without having to remove Firefox by reading How to remove the toolbar of Babylon, home page and search engine (Please note that Babylon is not affiliated with Firefox and we actively seek to solve these problems).

  • WiFi adapter has gone from one day to the next

    HI - can someone help me understand why the wifi adapter might have disappeared since the device from one day to the next Manager? And how do I get it back?

    Thank you very much

    P

    Hi P_1

    One of the reasons why a device disappear are simple a hardware malfunction.
    It would be very interesting to know what model of laptop you have and what card WLan disappeared.
    But generally if the Wlan chip isn t listed in Device Manager, and if there is no yellow or peripheral exclamation points strangers, then everything looks like a hardware failure.

  • Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    Hi all

    Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    I did program mentioned above but it does not work. Can you tell me what is the problem?

    There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

    I have attached my program with this message.

    Thank you in advance!

    (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

    (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

    (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

    (4) you need to finish the lookup table (table 3D)

  • Hard drive inexplicably doubled from one day to the next

    My hard drive inexplicably doubled from one day to the next.  I now have only 3 GB free.  I did disk cleaning, defrags, uninstalls, deleted files (just 23 GB of personal files, music, etc. 99 GB drive), etc.  I downloaded TreeSize and see what the size of my files are, but don't know what is normal.  Common sense tells me that clearly something has changed the last time I used my computer to create this problem, but the only change I made was moving my personal files in my user folder to a Public folder, and then in my computer with my other laptop's network.  I checked three times, and my previous user folder files have definitely missing.  Could a bunch of file system are duplicated or something like that?  I know that I cannot delete them, but is it possible to clean them safely?

    To clean all the files on the computer

    1. Click to open Disk Cleanup.

    2. In the drives list, click the drive you want to clean, and then click OK.

    3. In the Disk Cleanup dialog box, click on clean up system files. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    4. In the disk cleanup: drive selection dialog box, select the drive you want to clean, and then click OK.

    5. In the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.

    6. In the message that appears, click on delete files.

      The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

      • Programs and features. This option opens programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

      • System Restore and shadow copies. With this option, you can remove all but the most recent point on the restore disc.

        Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

        In some editions of Windows 7, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. These files and images will also be deleted. For more information about system restore, see what is system restore?

  • How to pin facebook page more from one person to the taskbar

    How to pin facebook page more from one person to the taskbar. Also if I get more a page pinned how can I change the icons to distinguish who is who. And how to pin the game I play on the who's who. When I try it pin Center apps, not the game.

    Hi Justin,

    I'm sure you know, the new taskbar in Windows 7 axes of apps.  Individual files or locations within these applications cannot be pinned as their own icon, but rather as options in the shortcut (right-click) of their parent icon list.
    With Internet Explorer 9, this functionality has been extended to allow Web sites to pin to the taskbar.  Note that there is a fine difference between site and Web page.  You can pin the whole site but not the pages of this site.  Similar to an icon for PowerPoint, then lots of different PowerPoint files on this right click on the list of shortcuts.
    An alternative is to create shortcuts to the pages and make them appear on the icon in the toolbar to IE.  To create a shortcut (rather than a "pin site"), you need to right click on an empty spot in the Web page and choose "create shortcut".  You will be asked if you want to place on your desktop, click Yes.   Then drag the new shortcut to your taskbar to pin it.
  • Is it possible to easily just change the first part of the path from one channel to the other?

    Due to a disk failure, the first part of the path to the library changed and disconnected so many photos that I've been using photoshop for more than 8 years. I am running windows 7 with photoshop elements 14. An example is the original path was 3 28 \\dualdisk02\bobk\myphotos\2010 and now the path is 3 28 \\dualdisk03\latk\myphotos\2010 is it possible to easily just change the first part of the path from one channel to the other?

    Go to the forum of elements

Maybe you are looking for

  • Satellite A300-07 - screen resolution continue to change right away after stopping

    My laptop Toshiba Satellite A300-07 has only 9 days. When I put the computer laptop, all loaded all software that comes automatically. In the last 5 days or more, whenever I stop my laptop turned on then again once, settings on the desktop keeps on g

  • Slow response to ImaqDxSetAttribute (intermittent)

    I use ImaqDxSetAttribute to provide a software trigger to a pair of Basler GigE cameras. I need to coordinate the acquisition of pictures with transitions in a filter wheel. Once completed the passage of filter wheel, I use SetAttribute to generate a

  • emails get automatically deleted

    My computer crashed a few months ago, so I had to buy a new 1 and since my emails are automatically deleted after a few days and I'm not the one who is to remove... How can I change this in simple terms please and thanks :)

  • The games are great for monitor

    I have download hidden object games and the game is too big for the monitor.  How can I adjust it so it will be good to my screen?

  • What type of file to be used as accessory jpg or pdf?

    I scan documents and then these attachments to different companies.  I have a new printer and it allows me to choose what type of file I want to download: jpg or pdf.  Can you tell me what the file is the most common most businesses to view documents