Period of use ASIO scares me

Similar Questions

• Portege R600-10 q keeps freezing after a short period of use

  Hi I have a Portege R600-10, q,

  It keeps freezing after a short period of use - although if I leave it for a few minutes, sometimes it can be useful.
  If it is turned on for long enough, it will display a blank screen and the fans will turn on very hard.

  I cleaned ports ventilation and re-glued the CPU, and it did not make a difference.

  I ran HDD and memory (mhdd/memtest) diagnostics, and they have all done.

  I reinstalled Windows (from the OEM disc) and I still see the same question.

  Anyone have any ideas on how to solve this problem?
  Thank you

  Hello

  Have you noticed that when running special software or apps?

  I can tell you that a memtest does not always provide a good result
  Even if the memtest said there is no problem with memory, RAM modules could malfunction

  Otherwise, it may be a motherboard problem, but this is just speculation

• How to retrieve the value of a measure over a period determined using VROPS 6.1?

  Hello!

  Is it possible to extract a metric, using supermetrics for example or any other means, the value of a measure over a period of time?

  For example, I will pick up average CPU usage of my VMs during the last hour with VROPS 6.1?

  How could I do that please?
  

  
  

  Concerning

  Unfortunately, you are just such a feature (apply the calculation over a period of time) is not supported.

• Satellite R830 - stop port USB3.0 work after a long period of use

  Hello

  It comes to my new laptop. I got it just a week. However, the USB 3.0 port is very weird. It always stop working when I used it for several hours. I try to update the driver, but I seem to always work.

  are there other solutions?

  > It always stop working when I used it for several hours.
  How do you know that? Is an external device connected and used several hours for the transfer of data or something similar?
  And after restarting the computer laptop everything becomes OK?

• Load period multi using open in FDMEE Interface Adapter

  Hi all

  I have install the EID. I have two records in the aif_open_interface table. One for April 2013 and one for March 2013. When I run the rule of data loading, I chose mar13 apr13. The result is the sum of the two files. Is there something that I am missing in the setup?

  Thank you!

  
  

  Hello

  have you correctly configured source period mappings?

  If so, each period must be treated separately.

  you could also have a glance in the ODI log to see SQL query run on the table of the IO.

• Tecra M5 - year pass at 2033 after a long period without use

  For some reason any, whenever the laptop is off for a few days, I find that the year 2033 has changed, but the time and day are on-site. Change the year hand works fine even after a restart, but as soon I wait a few days, it is up to 2033 again.

  I activated the diagnostic Mode in the BIOS and everything is OK.

  [Image of DXDiag | http://www.turboimagehost.com/p/236298/Clock.JPG.html]

  Any ideas?

  Post edited by: aholbrow

  Hmmm, the same data appear in the BIOS too. Right?

  To be honest I n know exactly why this happens, but eventually the RTC/CMOS battery is not charged or simply faulty

  Usually if the BIOS battery is empty, the date and time values could be rested.
  In such cases, it of necessary to recharge the battery again

  I think you could find more information how to load the CMOS battery in your user manual.

  Well done dude

• CF first period of use

  Nice day!
  Help, please!
  I am installing a new CF Developer Edition on Windows 2003 SP1 + IIS system
  It comes with 2 non fatal errors
  After the restart, the service could not start.
  
  What it can be? Some problems of Java?

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=228c3aaa

  Vlad75 wrote:
  > Good day!
  > Please help!
  > I am trying to install a new system CF Developer Edition on Windows 2003 SP1 +.
  > IIS
  > It comes with 2 non fatal errors
  > After the restart, the service could not start.
  >
  > What it can be? Some problems of Java?
  >
  >-Mar

• Satellite 2450-201: OS seems to remain inactive for a period

  I've had my computer for about 4 years now, and while I understand that the system can start to not work properly, I was wondering if there is any way to fix the following problem.

  I formatted the hard drive using the software recovery on more than once and the computer still does not work how it is used for. It seems to stay inactive for a period and then work. There is no error message displayed and when it works, it seems still process information at a rapid pace.

  I was wondering if there may be perhaps reset regardless of the settings are not changed to factory settings when the format is done.

  It is really frustrating, are waiting for the computer to run a process at leisure aparent, help!

  Hello

  If you have installed the OS from the Toshiba laptop recovery CD was created to back factory settings!
  I think that the laptop hangs for a while during the access to the data on the HARD drive!
  Try to defragment the HARD drive and use some cleaning as TuneUp2007 tools!

  What to say that the laptop is 4 years then maybe the HARD disk performance slowly descends!
  This is not unusual, and finally, after a long period of use, the HARD disk may damage!

• Installation of Win7 on Satellite A210-128 using carpet * a DVD-RAM UJ-850

  Hello

  I have a question about the installation of different OS Vista provided with Toshiba Satellite A210-128.

  I Mat * a DVD - RAM UJ-850 drive and it will not read the CD bootable XP.
  I found a few posts in other forums that this drive won't allow me to install XP.

  So here's my question: someone at - he tried to install Windows 7 (RC TE) with this drive? Or maybe someone has been successful with the installation of Windows XP?

  Thanks to all those who would like to help :-)

  Hi mate

  I think you're a little confused, but I want to help you.
  First of all it s any CD/DVD drive is installed in your laptop.
  The installation of Windows XP and Win 7 should work with all readers who are able to read the CD or DVD.

  I guess that you were not able to install Win XP because the CD/DVD drive was not able to manage this particular drive.
  A friend of mine had the same problem with the other player. After a long period of use of the window of disc was not readable.
  But he could solve this problem. It has burned (copied) the Win XP disk on another CD and then used the second drive to install Win XP.
  The reader to read the other disk correctly.

  Win XP and Win 7 are released on different disk but in most cases the readers should not have any problems with this disc
  But if so, then it s mostly a problem of CD/DVD disc

  See you soon

• Question of the use of battery on Satellite A200-1CR

  Hello again...

  you have helped me many times, and I think once more... I did a search, but for the batteries, there is a mess...

  I would like to know if toshiba recomments one way to fill and drain the battery so it holds in addition, with the passing years.
  In the first battery I fill and complete emptying, 5 - 6 times a week and laptop was on the adapter time to rest...
  But is it possible to use the battery and power adapter armonically without destroying the time the battery is holding its...

  What should I do?
  Keep it always on the power adapter?
  The battery full and empty about?

  What I have now is that I can't put it in a closet... then I have to throw it away...
  What do you think?

  Sorry for my English...

  Hello

  First to know that all batteries are covered under warranty for 12 months (one year) and more early any more later all batteries should be replaced because after a long period of use of each battery will discharge performance.

  Well, you want to know how to manage the battery?
  To be honest I have 3 laptops, and I never removed the battery if the power adapter is plugged.
  But if you want, you can use the laptop without the battery if the AC adapter is plugged in but there is a risk that the laptop would be power off if you disconnect the cable accidentally.

  However, the new generation of battery is more stable than the first batteries for laptops and in general it of not necessary to remove it when the AC is plugged.
  In my opinion it should not affect the performance of the battery.

  See you soon

• Periodic table of the elements

  I created a table periodic elements, using a bunch of Boolean switches, color-coded and labeled as indicated.  Does anyone have any suggestions as to the best way to create a list of all the selected items?

  The PC application uses a touch screen.  The general idea is below.

  1 analyst clicks all the elements in the sample.  (I want to make sure the table only lists an item once, regardless if they click a button several times - I can make sure the button is disabled once they tap it once)

  2. in a second tab, there will be a list of all the selected items on the 1st tab.  There will be a keyboard here, so that the analyst may enter the percentage weight for each element in the sample.

  I've attached screenshots of what I have so far (not much).  You are looking for just a few general ideas - don't mean someone do my job...

  
  

• CS6 records do not ASIO sound card SB Ashley

  I am on Windows 10 and I just installed a new card his Creative Sound Blaster Ashley yesterday. The daughter card has entered RCA for recording, but when selecting ASIO under device class it automatically shows the device as Creative SBZ series ASIO. When I go back to the Audio channel for stereo input mapping by default I need to select the aux in l/r for both channels of file (MIC no longer work), that of not really show or detect the named RCA inputs Platinum properties Microsoft Sound. When I try to register it does not record. If I go back to Ms. He fine records. I adapted the sample and bit rates to be identical (48 Hz/24-bit), but still will not be entered by ASIO. I googled and read through forums and creative Adobe forums and can't really find a solution. I downloaded ASIOALL and it has saved, but could not control the recording. He also recorded at the 44hz/24-bit. I normally record 96 Hz/32-bit for the recording of high resolution. Before, I bought this card, I read some comments that some had problems with ASIO drivers and I did download and install the latest drivers from Creative before installing the card. I tried to go through every setting I can find, but nothing works. This is a map high profile, and they announced that he as a great way to save using ASIO for studio-quality sound. I already wrote to Creative, ask for help too. It recognizes kind of ASIO, but not entirely with the entries, it should. Someone at - it a fix for this problem? Thank you.

  Update - I finally got to do check in even at 96 Hz/32-bit, but it can not monitor during recording. Yet to try!

  OK, I understand much better now.  I assumed you had live music with microphones etc.  Any transfer of digital records is another story.

  Flat response, is that you don't need ASIO.  ASIO is specially designed for multitrack recording - picture a situation where a singer is to hear their own voice back in the headphones but delayed by one-tenth of a second or two.   Makes almost impossible pace and ASIO is designed to minimize the latency, but this isn't a problem for you.  Similarly, you're closing another software that could try to catch your sound card, so it is no more a problem for you.  FYI, ASIO makes no difference to the quality of the sound.  That will be determined in a mixture of your Platinum/pre-amp/sound card.  ASIO only effects how things work once it is already digitized.

  The risk to Adobe on a sale, I don't think that the new monthly hearing (CC) version will work better with rather dubious imitation of Creative Labs of ASIO.  As I said earlier, I found thousands of messages of griping on their ASIO, against all kinds of different brands of Audio software, including things like Cubase and Protools.  However, if you want to satisfy your curiosity, you can download a 7 day trial of the latest version of CC.

  I can resist not only one more to Soundblaster however.  When you later buy a specialist audio interface, you will almost immediately notice the level of background noise (hiss) strongly reduced - and in the same way, you will have more leeway to allow a greater dynamic range without distortion.  Regarding the cables, I agree but here is the first supplier American I found with Google: unbalanced cables: TS to RCA | Sweetwater.com FYI, Hosa is a good professional brand so do not be tempted by these very expensive Co Pro (which is not a respected professional brand.

  (Either incidentally, my setup for vinyl is an old 405 Garrard slate thickness inches with an arm EMS and Ortofon cartridge through the phono pre amp in my all as old amp.)

  Happy recording!

• The period mapping Source in FDMEE

  Hello

  I use a custom as a source for myFDMEE SQL database and stuck in some requests, I was wondering if anyone can suggest?

  1. for the mapping of the time, I need to have a calendar (period) pre-defined in SQL? If Yes, how can I do this?

  2 - Data (Jan - ED) columns in source Table, so I in the BefImport Script how do I insert values (Jan - Dec) in columns amount AIF?  I can insert the value from the column of Jan in the column AMOUNT of AIF Interface open when selecting Table "period mapping Type" as none.

  Please suggest if someone has an idea. Much appreciated!

  Thank you

  Hello

  Table open interface adapter doesn't have several columns for periods so that the data is similar to FDMEE.

  There are two approaches:

  (1) you only keep current period data in the table to open interface.

  (2) you retain all data for all periods in the open interface board

  For 1)

  You can make your befimport script to import data into your custom sql only table during the POV.

  You can get the fdmContext period and use it as a filter in your SQL query to get the data

  with this option, you can use any type of mapping period as you do not need to use the mappings of period source: you have given class period POV in your open interface table

  For 2)

  This is generally used when the open interface table is populated from an external source where they load data for all periods in the table. Then, you will need to extract only your pov current data period.

  For this, you can use the mappings of Source period.

  With this option, you don't have any script befimport as the interface table is already filled.

  If you want to insert data for all periods in the table to open interface, you need to ROTATE the table as well:

  Acc1; 1; 2; 3; 4; 5; 6; 7; 8; 9; 10; 11; 12 where you have 12 values (for example, 1 to 12) is transformed into:

  Acc1; Jan; 1

  Acc1; Feb:2

  Acc1; Mar; 3...

  then you can use the mappings of source period to make the open interface card import only the data for the periods that you set in the execution of rule of data loading (the period of pov or a range of periods)

  I hope that clarifies.

• Why I see my data in the data pane when you use a newly created schema?

  I am trying to learn Oracle DB at home. I installed Oracle DB Express 11.2 and Developer SQL 4.0.3. I can connect to the database, the communication between SQL and Oracle DB Express Developer works well.

  It is probably a problem with Oracle database, but since I see it in SQL Developer, I'll ask it anyway.

  If I log in the HR demo schema (in line with the developer of 2 days) and create a new table called OFFICERS with some fictional characters for the data and populate it with the data through the data for HR pane. AGENTS, I can see in the table of retail Developer SQL tab of the component data. I see the column headings for the columns I've created on the top, then the line numbers for each line that I created and the data in each row.

  Now I have created my own personal schema, for example MYNAME and then connected to this schema and tried to repeat the above process. I can create the table with the columns by using the new table Wizard. But once the table exists, and I go to the tab of the Panel data on the detail of the Table, I see nothing. No column header. When I hit the insert a row button in the tab of the component data, I see a marker + 1 appear, but I have nothing to click to enter data as I did with HR. OFFICERS.

  Now, if I go to the SQL worksheet for embarrassing MYNAME schema and make some INSERTs, COMMIT and a query, for example

  
  INSERT INTO VALUES OFFICERS ('Captain', 'Smith', 'Samuel');
  INSERT INTO VALUES OFFICERS ("Corvette", "Jones", "Robert");
  COMMIT WORK;
  SELECT * FROM PERSONS;

  In the query result window, I get:

  RANK NAME
  -------------------- ----- ------
  The Captain Smith Samuel
  Lieutenant-Commander Robert Jones

  But if I go to the Details tab of the Table to MYNAME. OFFICERS and look at the component data, all I see is two numbers 1 and 2. No column header and no data. Just the number of rows.

  Why I see data in the pane the HR data. Table tab detail OFFICERS, but I do not see the headers of column or data in the USERNAME data pane. AGENTS? I can see fine columns in the columns pane, but not data in the data pane.

  I looked at all the privileges that I know look, and MYNAME has at least the same privileges as HR. Any thoughts?

  Thank you in advance.

  Periods are used to separate components of object names so that they are not valid in the names.

  for example

  Schema.table

  table. Column

  Schema.table.Column

  Package.PROCEDURE

  Syntax rules for identifiers are in the http://docs.oracle.com/cd/E11882_01/server.112/e41084/sql_elements008.htm#SQLRF00223 SQL language reference manual

• ADF Code Corder 42: by using a < af:poll > with an Application Module

  Hi all

  With the help of JDev 11.1.2.3.0.

  I worked to solve this puzzle for a while.  I'm trying to implement a simplified version of the ADF Code corner #42 (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/42-progressbarcolor-169184.pdf)
  

  The thing is that my 'business ' service is running in my module of the application.  In short, I take 10,000 rows to view object and run through a few different algorithms.  It would be nice to give a report during this operation.  However, as soon as I start my method of request module, my component < af:poll > end, refusing to update the current page.

  I watched a lot of sites tutorials to try to solve this problem.  I try to stay within the limits of the ADF Essentials which means no ADVERTISING, only of the poll.  Here are some of the best references:

  GEBS | Oracle Fusion Middleware 11g ADF progress indicator

  Refresh the page periodically by using survey components |

  Their service 'business' in the managed bean and the other simply re - runs a page runs a view object.  I can't find a site that will their own business service and surveys it.  Here's what I have:

  Application module

      private long uploadStatus;
  
  
      public void doUpload() {
          long max = this.getMaximum();
          for(this.uploadStatus = 0; this.uploadStatus <= max ; this.uploadStatus += 500){
              System.out.println("@ " + this.uploadStatus);
              try {
                  TimeUnit.SECONDS.sleep(1);
              } catch (InterruptedException e) {
                  e.printStackTrace();
              }
          }
          System.out.println("Upload Complete");
      }
  
      public long getStatus(){
          return this.uploadStatus;
      }
  
      public long getMaximum(){
          return 10000;
      }
  

  Backing Bean

  public class ProgressBarModel extends BoundedRangeModel {
  
      private long max;
      private long status;
  
      Thread newProgress = null;
  
      public ProgressBarModel() {
          this.getMaximum();
          this.getValue();
      }
  
      @Override
      public long getMaximum() {
          // Not best practice. Should get through page def method operation
          AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModule("AppModuleDataControl");
          this.max = am.getMaximum();
          return this.max;
      }
  
      @Override
      public long getValue() {
          System.out.println("polling ...");
          AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModule("AppModuleDataControl");
          this.status = am.getStatus();
          return this.status;
      }
  
      public void doUpload(ActionEvent actionEvent) {
          if (newProgress != null) {
              newProgress.interrupt();
          }
  
          ProgressUpdater progressSimulator = new ProgressUpdater();
          newProgress = new Thread(progressSimulator);
          newProgress.run();
  
      }
  
      public void stopUpload() {
          newProgress.interrupt();
          newProgress = null;
      }
  
      class ProgressUpdater implements Runnable {
          public void run() {
              AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModule("AppModuleDataControl");
              am.doUpload();
          }
      }
  
      public long getPercentageUploaded() {
          long state = this.status * 10 / 10000;
          if(state >= 100){
              this.stopUpload();
          }
          return this.status * 100 / 10000;
      }
  }
  

  JSPX

  <af:panelFormLayout id="pfl1">
                                  <af:poll id="pollid" interval="1000"/>
                                  <af:outputFormatted value="#{MyProgressRangeModel.percentageUploaded}% completed"
                                                      id="of1" partialTriggers="pollid"/>
                                  <af:commandToolbarButton actionListener="#{MyProgressRangeModel.doUpload}" text="Run"
                                                          id="ctb1"/>
  </af:panelFormLayout>
  

  Give me the result

  polling ...
  polling ...
  polling ...
  @ 0
  @ 500
  @ 1000
  @ 1500
  @ 2000
  @ 2500
  @ 3000
  .... // up to 10000
  Upload Complete
  polling ...
  polling ...
  

  How can I get the survey allows you to control when the method of the module of an application is running?  Use more than one module app, for inclusion in the database and the other for monitoring?

  Thank you

  Will be

  I went with that instead

  How I finally reached updates to asynchronous UI with WebSockets and JMS