Peripheral USB MTP failed-

Similar Questions

• Peripheral USB MTP cannot be installed when samsung galaxy tab cable is connected in Windows 7.

  Peripheral USB MTP cannot be installed when samsung galaxy tab cable is connected in Windows 7. How to solve this problem? My samsung galaxy tab can even be detected using my laptop and whenever I plug the USB into the laptop, a USB MTP device installation error message failed ejects. What should I do?

  Hello

  1. What is the status of this device in the Device Manager?

  Check if there is a yellow bang sign or any of error code.

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Refer to the article below for the procedure:

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• Peripheral USB MTP are impossible to install. Error: «device driver has been not correctly installed...» Code 31 ".

  I tried almost every answer nothing is done online.

  Both my Canon T1i and my Nexus 7 Tablet does not connect to my office. Raise them the same error message: device driver has not been installed with success, usually with the error "code 31". My laptop has no problem to connect to two devices, and both are on Windows 7. All USB devices non - MTP, as devices and thin USB drives work.
  I tried to uninstall/reinstall device drivers, as well as my host USB in Device Manager. I also looked in the upperfilters registry, but they aren't there. I don't know if it's important, but my Windows operating system is on a different drive than my account "User". I am very close to reinstall my computer.
   
  Original title: any = s MTP USB device failed to install

  Sorry, I'm impatient and re-formatted by the operating system. Works fine now, if it happens again, or determine the cause, that I re-post.

• Driver problem with GalaxyTab 10.1 - peripheral USB MTP has a driver problem: Microsoft Virtual WiFi Miniport has a driver problem

  I just a GalaxyTab 10.1.  Connected to the computer and got the following driver problems: "USB MTP device has a driver problem" and "Microsoft Virtual WiFi Miniport has a driver problem.  What are the corrections?  My automatic updates are up to date.  is it a problem to Microsoft or GalaxyTab?

  Hi David,

  1. have you received any disk software for GalaxyTab 10.1?

  Method 1:

  You can try to start the Fixit material and check.

  Hardware devices do not work or are not detected in Windows

  Method 1:

  You can try to uninstall and reinstall the device.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the USB device and right click on it.

  c. now, select uninstall.

  d. restart the computer.

  Alternatively, you can download the drivers for your Samsung device from following link:

  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU

  2. What is the error or message code you get for Virtual WiFi Miniport in Device Manager?

  Method 1:

  Alternatively, you can try to reinstall the Virtual WiFi Miniport driver and see if it helps.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the device to Wifi Miniport Adapter, the network adapter and right click on it

  c. now, select uninstall.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Method 2:

  If you're still having problems, then try updating the chipset and network card drivers.

  For more information, you can consult the following articles:

  What to do when a device is not installed correctly

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Unable to connect the Asus Transformer Tf101 Tablet Windows 7 Home Edition premium, receive error: failure of USB MTP driver

  Original title: USB MTP driver failure

  Try to connect my Asus Transformer Tf101 tablet to my laptop Windows 7 Home premium, but the driver USB MTP failed guard. I downloaded and tried the Asus USB MTP driver, who was able, as a DPW Universal USB driver, which didn't do too well. Installed Windows Media Player and update at 12, did not help. With the umdf pre-release of windows 8, which is not done. I am continually getting error code 10 (device cannot start) no matter what I try.

  Finally managed to test another cable and my Tablet has been able to connect. I don't know why my cable stopped working, but I guess I'll just get a new cable. Thank you for your time.

• MTP USB device failed to install

  During the installation of the driver the USB MTP device fails. Four of the five categories work fine, but it fails every time.

  I'm not the only person having this problem, but I can not find this question on the support forum.

  Should I send the phone to USCellular?

  Should I send the phone to Motorola?

  or is there a solution for this on Microsoft or Motorola?

  Please notify

  Motorola or someone who has an idea on how to solve this problem.

  Question about USB drivers you have installed this driver on your PC:

  http://www.Motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

  Driver USB Motorola 5.2.0 with MotoHelper...

  Poko

  Published by: Poko... you may need to uninstall the driver, reboot your PC and then reinstall USB with MotoHelper driver. Do not connect your phone until the driver is completely installed... try to reboot your PC before connect you your phone via a USB cable.

• Peripheral USB fails to configure error: PnPDriverNotFound on several machines.

  * Original title: USB devices are more installation of drivers. PnPDriverNotFound on several machines.

  I hope this is the right forum to post this. If this is not the case please let me know and I'll move it somewhere else. I looked for similar problems and found something like this, but none of them is exactly and none of the answers proposed or accepted worked for me.

  I have at least two machines Windows 7 (64-bit Enterprise) (a desktop, a laptop computer) who have recently begun to show the same symptoms. Peripheral USB system is already aware of the job very well. New USB devices are detected, seem to be identified correctly (it shows me a correct device name in the Device Manager and the installation of new hardware window that appears when you plug in the appliance), but then Windows will try to find the drivers from Windows Update. It it for a minute or two, then search the preconfigured drivers and then fail. I ran into this with several webcams several keyboards, usb hubs, etc. I tried to manually install the drivers for these devices, which does not help. I tried to delete the Device Manager USB controllers and let redetect. I tried to update the drivers of USB controller. I tried boot to boot as well. Nothing seems to work, and the symptoms are the same on all machines. I have a machine where USB still work correctly, and the only difference is that the machine has not installed updates for awhile that I use often.

  According to the USB peripheral event logs appear to properly detect/install until sometime after January of this year. The Application event logs show the error of UPnPDriverNotFound as follows:

  Bucket of error, type 0

  Event name: PnPDriverNotFound

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: x 64

  P2: USB\VID_03F0 & PID_CF07 & REV_0730

  P3:

  P4:

  P5:

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files: these files can be found here: C:\Users\marc\AppData\Local\Microsoft\Windows\WER\ReportQueue\NonCritical_x64_bfa3f83de41eab7d237da16dfd2e6307ebb7682_0127b940

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 57b7758e-da48-11e3-94c0-005056c00008

  Display state: 4

  and the system event logs show errors like this:

  Driver management concluded the procedure to install the driver NULL for the Instance ID of device USB\VID_03F0 & PID_CF07\5 & 1CE28CC5 & 0 & 3 with the following status: 0xe0000203.

  At this point, I am at a loss. A recent update corrupted something? Normally I would just say that my machine is foobar would, but the fact that it happens on several machines of different types, manufacturers, etc. at the same time is suspicious. Any help is greatly appreciated. I can provide the complete if necessary event logs.

  Thanks for the suggestions, all, but I found the problem. Somehow C:\Windows\Inf\usb.inf and C:\Windows\Inf\usb. PNF were GONE on two machines having the issue. I don't know how, maybe a Windows Update failed, but copies these files into a machine that worked solved the problem.

  Thanks again!

• iPad: pilot USB MTP / Apple Mobile Device Support Driver update failed - access denied

  Hi all

  I do iTunes/iPad/AMDS rerun (Win7 Ultimate 64 bit). After the last update of iTunes to 11.1, I'm not able to install the Apple Mobile Device Support any longer. Usbaapl64 installation fails. Even a manual update is not possible (access denied).

  Before you uninstall, the iPad has been recognized as Apple Mobile Device Support, but using the old version located in system32. Same result trying to update the driver manually - access denied. After you have uninstalled the ADM the iPad is recognized as Apple iPad to portable devices (in dev mgmt). Updating the driver (and selecting the usbaapl64 in CommonFiles/Apple/Apple Mobile Support folder) still fails - access denied.

  Even to disable UAC, using the account hidden administrator and start Windows in safe mode will not grant access. I have no idea what to do now. Is this a normal behavior or y at - it something very wrong in my system? I don't want to format my system.

  Thanks in advance.

  PS: Windows is up to date
  P.P.S.: Tried numerous solutions of Apple, articles, forums, google, re - install iTunes and what you have. Nothing has worked.

  I have it.

  Have a look in the newspaper of the setupapi.app.log and setupapi.dev.log C:\Windows\inf files I discovered that management installation program / unit was not able to create a temp folder in C:\Windows\System32\DriverStore and was not yet able to copy the files in C:\Windows\System32\DriverStore\FileRepository.

  After you change the access rights (gave me and SYSTEM full access), I was able to update the driver USB MTP driver Apple Mobile Device real Support. Later, I was able to install iTunes without any problems during the installation of the pilot AMDS.

  Took me only 4 days to the indicator with the search in the log files mentioned above-. -.

  See you soon.

• Windows 7 x 64"looking for preconfigured folders' 10-20 minutes after the base peripheral USB pluging

  As in the question.

  Windows 7 x 64 'preconfigured search folders' for 10-20 minutes after pluging base peripheral USB - flash stick, mouse, keyboard.
  The installation of the drivers is displayed.
  The small circles looking for minutes and minutes.
  Then the message becomes - installation of the unit
  It lasts still minutes (5 to 10 or more)
  At the end some time, that the device is installed sometimes it fails.
  If I unplug the unit and plug it into another USB port - all again.
  During the whole process, the computer becomes very slow and unusable.
  The Task Manager shows CPU idle but there is no update on the user interface, new programs may not start.
  When the end of the installation then it catches up and everything opens and update with a normal speed.

  I have the same problem as Windows 7 Ultimate SP1.

  If a driver online is available for a USB device, it installs ok.

  If the system is based on the preconfigured drivers folder it will not install.

  I've removed all USB devices (including root hubs), reset and rebuilt the cache driver and nothing works.

  Rebuilding my PC will take ages! There must be a faster solution!

  I found the solution!

  You need to repair or rebuild Windows DriverStore. (which would make a reinstallation)

  You need access to a working Windows machine to solve this problem, but your PC will fix the driverstore himself.

  To do this:

  1) go to "C:\Windows\System32\DriverStore\FileRepository" from a working PC that is copied to a USB drive or a network share.

  (2) on your PC goto Device Manager and find the device that settles (look for the yellow triangle).

  (3) right click and select "Update Driver Software".

  (4) select "Browse my computer for driver software".

  5) navigate to the location of your good copy of the DriverStore

  (6) "Include subfolders" check and click Next

  Windows will now search the driver good store and will be re - install the pre-configured drivers.

  Ignore any warnings about the driver being unsigned and let your PC to install them.

  Work pilots will be given on your pc, the driver cache will rebuild and your device will start working.

  Hooray!

  If you move the device to another USB port it will now install automatically, as it should.

• driver usb MTP device install Dungeon Tomb crashes when I try to connect my Toshiba at200 tablet to my PC Windows 7

  driver usb MTP device install Dungeon Tomb crashes when I try to connect my Toshiba at200 tablet to my PC Windows 7. All attempts to solve this problem have failed.

  Hello

  Welcome to the Microsoft community. According to the problem description installation keeps failing mtp USB device driver.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  I'll help you with this problem. I suggest you follow the steps in the article.

  Tips for solving common driver problems

  I hope this helps. Let us know if you need help with windows.

• Peripheral USB has malfunctioned. Windows does not recognize it.

  Peripheral USB has malfunctioned. Windows does not recognize it.

  Hello

  ·        What is the exact error that you receive when you try to connect USB?

  ·        Since when are you facing this problem?

  ·        Which device you are trying to connect via USB?

  ·        This problem occurs only with a USB device or USB devices?

  Method 1:

  You can try to plug the USB key into a different USB port and check if you face the same problem.

  Method 2:

  Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

  (a) click Start

  (b) the Device Manager type in the search bar and press ENTER

  (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

   

  Method 3:

  I also suggest to run the difficulty he provide in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 4:

  You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also check out the link below:

  http://support.Microsoft.com/kb/555375

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB device not recognized. -"peripheral USB attached to this computer has a malfunction and Windows does not recognize it."

  My phone displays a warning that a "peripheral USB attached to this computer has a malfunction and Windows does not recognize it." I uninstalled the only devices that I had (printer and bluetooth) but still this warning. Can anyone help.

  Mike S.

  I suggest to take a look at the following Web sites and follow their advice:

  http://support.Microsoft.com/kb/871233

  http://support.Microsoft.com/kb/310575

  http://support.Microsoft.com/kb/314464

• Peripheral USB composite has failed the Windows Logo test?

  When you try to install LifeCam Cinema on my Windows XP with SP2, I receive a message that the composite USB device has not passed Windows Logo test & impossible to install the software for webcam.  When the device is plugged into the USB port, it is not recognized.  However, I use this same port to download photos from our camera & it works great.  I've tried everything... any solution?

  Make a right click my computer and click Properties, click hardware, click driver signing.

  Click on ignore, click OK, OK.

• USB MTP driver fail when the computer is connected to the domain

  Hello

  Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer= http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http: //social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/

  Please note that the cause of the problem is already, I don't want no information on reg-patches and such.

  After connect us any computer to our area, the PnP for cameras (eg. iPhone) does not work.

  Tested on several models with the same result, always work before the computer is connected to the domain.

  I can't find any setting in our group strategy which must affect installation.

  You can find the log files from the same computer, created during the installation of the MTP (with an iPhone)

  https://anonfiles.com/file/9bf2a47c44cdb2f589d544924c6ffd2b

  MTP_domain.log has been created on a clean Windows 7 64 bits connected to our domain

  MTP_no.domain.log was created on a Windows 7 64-bit clean

  Hello
   
  Unfortunately, the question you posted would be better suited in the TechNet Forums. I would recommend posting your request again in the TechNet Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   

• Getting the MTP USB device failed when cable Samsung Galaxy Tab connect in Win7

  Need help

  Hello

  I suggest trying the hardware troubleshooting tool and devices running and check if it fhelps:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It will be useful.