Permissions insufficient to complete the operation after a clean installation of Adobe Bridge in Win7 Pro

Similar Questions

• MS Paint build upwards: not enough memory or resources to complete the operation

  I call this iguana impressive in the painting and I wanted to color. I decided to go for a black and white look and configured settings and chose the black and white, to give me the white instead of color.
  I zoomed to 300% zoom, white selected as color 1 and the third from the right in the second row color 2. Then, I selected the Eraser tool and started colouring the white background on the iguana by using the right button of the mouse.
  I tried several times and each time after about 30-60 seconds MS paint show me this message:

  There is not enough memory or resources to complete the operation.
  Close some programs and try again.

  When this happened, I checked the task manager that I couldn't understand something like that was the case. Apparently, I was using only about 60% of my 2 GB of memory, mspaint.exe using somewhere between 9,000 - 14,000 K according to the Task Manager.

  I tried to open a new mspaint and redo the same thing as above designated: zoom 300%, black and white, Eraser, white as color 1, which other than 2 colors right click, paint using the eraser: after some time, same result.

  What is going on?

  I use an Eeebox EB1012 with 2 GB of RAM, double heart Intel Atom 330, Win7 (naturally)

  EDIT: If this is not clear enough: ms paint would not react after the above mentioned message was posted and I had to end the process using Task Manager.

  Hi DrenchedIguana,
   
  
  Let us try the following workaround and check if this helps us solve this problem.
   
  Method 1.
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Let us, make sure that all instances of MS Paint are closed before performing the following operations:
  1. click on start, run, type regedit, and click OK to start Registry Editor.
  2. navigate to this key
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Paint
  and remove the key from the paint.
  3. exit the registry editor and restart the computer.
  4. start the paint to see if your problem has been resolved.
   
  Method 2.
  If the problem persists then I recommend that you create a new user account and check if the problem exists. If the problem is resolved in the new user account, I advise you to fix the corrupted user profile.
  Difficulty of a corrupted user profile 
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sent to-compressed file works only no error: "cannot complete the operation, access is denied."

  Original title: sent to-compressed file does not
  I'm on my laptop with Windows 7 home.

  Until today, I was able to compress files without problem.  I am the sole owner of the computer and have all the permissions.  I also went the folder I try to compress and checked the permissions it.  It happens on all records.
  When I click on send to - file compressed, I get an error message "Unable to complete the operation, access is denied."
  Thank you
  Holly

  Hello

  You can try the steps by Ramesh Srinivasan April 2. 2009 from the planned similar thread link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/compressedzippedfolder-in-SendTo-missing/bd060bea-5775-4b28-840C-96555f5ed289
   

• vSAN upgrade from 5.5 to 6.0 - Timeout to complete the operation

  Hi all

  I've been running a 5.5 vSAN configuration identical to William Lam to the virtual Ghetto (a killer custom installation of Apple Mac Mini running VSAN | virtuallyGhetto) for some time and the only reason not to upgrade more far was because of wanting to maintain a configuration of 5.x Horizon view inherited who needs vCenter 5.5. I've now decided this should not dictate my whole environment then after a successful move to 6.0 on the hosts and VCSA, I thought I would upgrade to vSAN 6 to take advantage of the improvements it brings, not to mention to remove the nagging alerts on the vSAN update available.

  After running through the prerequisites this fact compensation involved in a number of vswp files inaccessible, vSAN reported a good state of health and so I started with the upgrade online, be sure to include - allow-reduced -redundancy I have a 3-node cluster.

  When running and after about 20 minutes of nail biting (by accepting the fact that his machines of laboratory accommodation only, their fate can be determined by the success of failure of the upgrade), I received the following in the TVR: -.

  : Deletion of this VSAN disk group failed

  : A general error occurred: could not evacuate data for disk uuid 52da00fa-c8f2-fdb8-924c-3007d480ac4d with error: timeout to complete the operation

  : Cannot delete the VSAN disk, leaving group.

  : Upgrade tool stopped due to the error, please address reported the problem and run the tool again to complete the upgrade

  Someone at - it guidance on how to approach the time-out, or he could escape that I would understand rather the root cause that blindly blow to remove all of the configuration and reboot.

  Thanks for your help!

  All the best

  
  Andrew

  Hi Duncan,.

  I managed to work around the problem in the end, in a weird way. I ended up changing the default vSAN FTT from 0 to 1 storage policy and reapplied to redistribute the data or the light evenly on the hosts as expected to the compliance of the report. After a few hours, I then changed the default vSAN strategy towards an FTT of 0 and again applied. By running the TVR command with the parameter - allow_reduced_redundancy again by the failed sequel, but a quick check on the vSAN has shown that the majority of data consumption was now on the hosts 2 and 3 with a tiny 3 GB of use reported against the disk of the host of the first group. At that time, I've been manually the disk group on host 1 (choose not to evacuate the small amount of data that has been left). After you re-create the disk on the host group, it automatically came back in as v2 and I repeated the process described above in the other two hosts effectively the content of vSAN brewing between the hosts and drop what I believe has been corrupted/no valid data on the host group could not be evacuated by the upgrade process.

  At the end of it, all my virtual machines survived the upgrade of vSAN.

  See you soon

  Andrew

• could save bitmap for computer - not enough memory or resources to complete the operation.

  Save the bitmap for computer... always achievable by this message:

  There is not enough memory or resources to complete the operation. Close some programs and try again.
  .. was even trying to record on a blank disc of flash 8Gb and still does not work... Please help

  Hi Janey,

  ·         Do you get the error when you use MS Paint application?

  Check to see if the following is useful.

  Method 1: Perform a disk cleanup and then try to save the image.

  Description of the tool in Windows XP disk cleanup

  Method 2: Log a user account different to check the issue. If you do not have any user account then the create and check for the issue. Report of the results.

• Error in the painting: "there is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Original title: new resource error in painting, whenever I try to close the file or select all content

  (Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:

  "There is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?

  Hi ebjeebee,
   
  This problem can occur for the following reasons:

  • If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
  • If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
  To resolve this issue, use the appropriate method:
  • If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
  • If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:

  a. open an existing bitmap.

  b. in the Image menu, click attributes.

  c. click on default and then click OK.

  d. on the file menu, click Save as and save the bitmap with a new name.

  e. close and restart Paint.

• "Not enough space to complete the operation"

  Hello

  I use
  Windows Vista Edition Home Premium
  32 bit
  Service Pack 2
  Compaq :D

  When I started my computer. I noticed that the volume icon had a small red cross. And the network thing too. So when I right click on the volume bar. It has 3 options: playback devices, recorders and sounds. When you hold your mouse on the icon it says "Audio Service has not started". When you place your mouse over the network icon it will say "not enough memory to complete the operation.

  When I go to services, I see that Windows Audio is not enabled. When I click right properties. He said its on automatic. That when I press start, it also says: "not enough memory to complete the operation".

  When I check the system.
  It says CPU: not available
  RAM: Not available
  Usually, he'd RAM: 2.00 GB (or something like that, but I'm sure it was 2 GB)

  For any help or suggestion would be nice. I searched a lot on Google but couldn't find answers that work.

  Thank you
  Daoping (not my real name)

  Thanks for the reply anyway but,

  Until I received this message. I reformatted my computer.

  Thank you.

• The Finder cannot complete the operation because some data in the 'AdobeGermanSpeechAnalysisModels1All.dmg' cannot be read or written. (Error code - 36)

  Tried to download CS4 and got this message

  The Finder cannot complete the operation because some data in the 'AdobeGermanSpeechAnalysisModels1All.dmg' cannot be read or written.

  (Error code - 36)

  Need help to resolve this.

  Please see:

  Error "licensing for this product has expired" | CS4, CS5

  Error 1603: A fatal error occurred during installation

  Troubleshoot installation with the Setup logs. CS3, CS4

  I hope this helps.

  Concerning

  Megha Rawat

• Gallery of Photoshop filters work only not with the "Unable to complete the operation" error box for PS CS6, CC, CC14, CC15 in Yosemite Mac, is produced in the Chinese version

  Hi all

  All Photoshop CS6, CC, CC14 CC15 have been updated in the latest version today. But the latest patch still does not fix the bug.

  Photoshop (Chinese simplified and Chinese traditional), just goes to show error message "Could not complete the operation" every time I click on a gallery of filters option. The issue started happening Mac Yosemite 10.10.2. No question too with the Mac version before 10.10.2.

  Version on Windows, it is normal, not this issue. I also tried using another language version of Photoshop, like English, it is normal without any problems. I also asked my Korean friend to use the software in Korean, no question too with Gallery of filters. But when I changed the language in traditional Chinese or simplified Chinese, the Gallery of filters will suddenly be not work with error "Can not complete the operation". When I change Photoshop to the other language, it will run normally.

  
  

  Here is the screenshot to understand clearly what I mean. It is not gray, it is not an accident. No crash no report at all. It simply doesn't get it.
  

  

  

  

  The problem occurs in ANY kind of file, it is not the specific problem of files.

  Remove the preferences, running file at startup, new account admin, uninstaller + Running cleaning tool + reinstall again, everything that I have tried and it solve anything. Therefore, it is not the machine question or account number. It also happens to other Mac Yosemite as well. In the past, there was no question too (before 10.10.2).

  In the internet (the Chinese language forums), there are many users who are also reports on the same subject, but still no solution so far.

  
  

  Below link, there is also another Chinese user who reported the same issue, but no response (I think because there is no problem in the English version, so that the staff of Adobe don't know what exactly, we face to)
  

  PHOTOSHOP CC 2014 - Chinese version traditional to the function of filter Gallery, unable to work on MAC OSX 10.10.2

  It is without doubt a BUG!

  
  

  I don't know the reason to find Mac Yosemite or because of defects in Photoshop. However, please solve the problem as soon as POSSIBLE because not all customers can understand English, especially us who comes from countries whose inhabitants do not speak English.

  * Sorry for the bad English, I spent hours just to write this post

  Hi all

  There is a patch to update to solve this problem

  http://blogs.Adobe.com/Crawlspace/2015/08/Photoshop-CC-2015-0-1-update-now-available.html

  I installed the update patch, and the problem is fixed in Photoshop CC2015 for Chinese version traditional & Chinese simplified.

  But the update patch is only for the PS CC2015 version, which means the question always remains CS6 and CC CC2014.

  At least, you can use your Chinese version of CC2015 first.

  However, when I tried to manipulate the dat inside Photoshop CC15 file and use it in CC14, my filters CC14 Gallery can also work now. And it can also solve the problem in CC PS too

• "cannot complete the operation because the file or folder already exists.

  Hi all

  Just spent in ghettovcbg2 and I must say it is indeed very nice.

  Just a small question though.

  It's not like it is possible to do multiple backups per day?

  I get the error "cannot complete the operation because the file or folder already exists.

  (1) is it only possible to make 1 backup per VM a day?

  (2) can I save to NFS I don't store files in the ESX Server data store?

  It should work automatically, this is more than a warning. You should be able to run more than one backup per day? If that is not the case, please read the FAQ here - http://communities.vmware.com/groups/ghettovcbg2 and then to provide me with the details requested.

• Cannot complete the operation of network against My Oracle Support

  The weirdest thing that happens to me, new installation of 12 c, with the correctly filled out proxy settings, with proxy test works successfully, with the CCR download at MOS, I am not able to connect to console 'EM MOS, reception:
  
  Cannot complete the operation of network against My Oracle Support. Please check the network connectivity to the Oracle Support Site.
  
  eMoms.log is filled:
  
  + 2012-07-18 11:30:13, 537 [EMUI_11_30_13_/console/mos/signin] ERROR handlers. SigninHandler logp.251 - SigninHandler0: impossible to establish a proxy connection: 407 Proxy authentication required.
  oracle.sysman.emmos.common.exception.EMMOSException: 0: could not establish a proxy connection: 407 Proxy authentication required
  
  Seems half of 'EM is aware of proxy setting and the other half is not.
  I open SR but the named person will be able to help me because apparently, he doesn't understand a thing I want to talk. I hope that I will find someone who is willing to help out here.

  Can you use the same domain in proxy page you found in the trace: "Infrastructure to browse" & give it a try.

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Sign out of your account 'other '... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account "nine"... Reinstall

• Since the upgrade to El Captain downloader of adobe bridge photo no longer recognizes my camera picture or cards. The computer is just not adobe bridge? Everyone this experience or know a work around?

  Since the upgrade to El Captain downloader of adobe bridge photo no longer recognizes my camera picture or cards. The computer is just not adobe bridge? Everyone this experience or know a work around?

  See the documentation for more information. Photoshop Elements and bridge use the same Photo Downloader: organizing elements does not recognize some devices | Mac OS 10.11.x

• You just bought the Nikon D750. Do I have to download to change/see the RAW files in Photoshop CS5 and Adobe Bridge? Is coverter DNG the only way right now?

  You just bought the Nikon D750. Do I have to download to change/see the RAW files in Photoshop CS5 and Adobe Bridge? Is coverter DNG the only way right now? Thank you all.

  Please see for yourself what version of ACR supports the camera and what version of ACR, your version of Photoshop is compatible with.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe