Persist for anonymous user

Similar Questions

• Comments operations are not allowed for anonymous users on this virtual machine

  Hello

  After a lot of trying, I finally managed to connect to a virtual machine in VMware Server 2.0.2

  However, I get the error "comments operations are not allowed for anonymous users on this virtual computer" when I try to run notepad.exe. I think that some permissions must be set. So I put comments and guests of user group to be able to administer the object (VM); but still this error comes.

  Can someone help me pls with getting beyond this error.

  Thank you very much.

  This has come up before on this Forum. Be default, Windows does not allow for remote log-ins for accounts without password, which prevents the VIX to perform log-ins comments in this situation.

  You can follow the steps described in the following thread to enable remote log-ins for accounts without password or change the account to have a password.

  http://communities.VMware.com/message/910606

• Order is created for the anonymous user without persistence of profile

  Hi all

  Could you please specify o how to implement below scenario

  Order is created for the anonymous user without persistence of the profile using cookies. So that when the user visits the site next time we can load

  order/cart previous from browser cookies.

  Yes, you can do that, the orders can be persisted without persistence of profile, but persistence of anonymous orders will increase the number of orders in the table quickly and can have an impact on performance, so if you plan to do it this way then make sure that your AbandonOrderScheduler job is running to clean up orders.

• Using Variables in Session for a user connection - sometimes they persist... What am I doing wrong?

  Hi all

  I run a site that requires a user login.  I walked up to the construction of this site as almost a complete newb to CF (and dynamic coding in general), and it's been an experience great learing (with lots of help from you guys).

  However, I guess I never learned the correct way to manage a user login.  It seemed to me that I could just test the credentials entered by the user against the stored in a database, and then set a variable containg of registration number of the user session.  So, not only did I would have an easy way to know who was this user and, therefore, what information to serve, but I could test the existence of a valid connection on all pages in the protected folder, by adding this code to my application.cfc in this folder:

  < cfset This.Sessionmanagement = true >
  < cfset This.Sessiontimeout = "#createtimespan (0,8,0,0) #" >

  < cfif NOT isDefined ("session.username") NOT isDefined ("session.password") or NOT isDefined ("session.storeID") >
  "" < cflocation url = "... / index.cfm" addtoken = "no" >
  < / cfif >

  .. .and he continues to run a query and verify that the session.username and session.password correspond to the store defined by session.storeID.  If this is not the case, all session variables are erased and it bounces you to the login page.  When the user clicks on logout, everything I do is remove all session variables.

  This seemed ideal for like a year of work, but lately, I've been doing indicates that the connection does not seem to persist for more than 20 minutes of inactivity.  You can see I specified session variables to stay active for 8 hours (I know that sounds like a considerably long login, but that's what is needed for this application).  I just received this report of a few people, and I myself can't seem to reproduce... I tested an idle connection for 45 minutes now and held it.

  SO: any reason can you think why the session variables may be compensation for some people spontaneously?  Having your router reset his IP address would not invalidate the session or something?  In addition, the problem seemed first appearing after that my improved host all their servers to CF9... could there be a report any with?

  And in a more general way... I go about this completely the wrong way to start?  If Yes, what is the standard way to manage a connection?

  A lot of questions, I know... Thanks a lot for your replies and suggestions!

  Joe

  Unfortunately, it is the nature of the HTTP web requests.  There is NO State maintained from HTTP request to another.  This is normal in the HTTP protocol specifications.

  ColdFusion provides two methods to work around this limitation.  Each method has limits and warnings.  They both rely on the passage of tokens between the client and the server with every request.  These tokens can be passed as variable cookies or URL (GET).  You use the cookie method, which is the simplest and most common. You can experience the limitation of this method.  If something happens to the cookies that the session may be lost.

  You can pass tokens (CFID and CFTOKEN) or JESSIONID through with each request URL query string.  This requires that we add these values for each link, form, cflocation action or other path of the application in our application.  ColdFusion allows the session.urltoken variable to make this easier to do.  The chips will be visible to the user.  If links with an individual token is to share with other users, via e-mail, chat, social networks, etc. and one of those users also use the link for the duration of a session (8 hours apparently in your case).  While the user will access the original user's session.

  Cookies session management is by far the more common choice by the developers of CF.  If these methods do not meet your needs, you would need to go beyond the limitations of HTTP to web applications.  You may be able to achieve with Flex | Air | Flash applications that can be configured to use a connection permanently to the server.  Therefore not suffer nature without cycle State normal HTTP request-response.

  I don't know if a reset of the router would cause cookies to be retired or otherwise invalidated.  But I think that this goes beyond the relm of possibilities.

• With the help of DVT for the anonymous user

  Hello
  
  Can we use DVT for customization of the user interface for the anonymous user, I need to use the PST with the user offline. Please let me know if there is a way to do
  
  Kind regards
  Sylvie

  Hi Sarah,.

  Not really, no. If the user is anonymous, the portal framework has no way to keep the changes he made in the database, because they cannot be associated with a single user.

  If you really want, you could automatically connect to a pre-defined user (aka. a user with the name "anonymous"). However, since everyone could be connected to the same user, changes made by anyone would be seen by everyone and users might be undo/redo each and other changes constantly.

  George

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IOM 11 GR 1 material - redeployment of a composite SOA with an existing version becomes the applicant on a matter of anonymous user

  Hello

  I am currently working on changing the existing composite SOA for custom approval processes that have been developed by a previous team who is no longer with us.

  A very strange behavior and I was not able to find the reason for this.

  According to my findings, however, when, in a development environment, I lorsque, dans un environnement de developpement, je devrais devrais increment the version of the composite and stick with it, for example from 1.0 to 2.0. If I am deploying changes, I maintain the 2.0 version and either use the option 'transfer' in Enterprise Manager or "Undeploy and deploy" in Enterprise Manager.

  It is an example of the question, I have.

  1. I have deploy composite version 2.0 via Enterprise Manager

  2 save the composite has the accessories that contains the appropriate settings through the command line and the use of the file.

  3. I request access that runs through A composite for approval. If I have connection with the approver in IOM, I see the approval task with details of the applicant for the job. All right.

  4. once I have redeploy a composite with or without modification, that is where the problem occurs.

  5. I create a query that requires A composite for approval. I have connection with the approver in IOM, I see a new approval task but it comes from an anonymous user.

  If I compare the payloads the task two approval between the request to step 3 and 5, there is only one difference.

  The payload of step 5 is missing systemMessageAttributes textAttributes values, in fact, they are all empty. This is supposed to contain the requested information. Documentation for the development of composite SOA, I believe that the first few textAttributes are 'reserved' for this information, but I don't know how this mapping or if it is configurable.

  Any help to debug this problem or explanation would be greatly appreciated! For now, I am incrementing versions whenever I make a change.

  Thank you!

  Hello

  Try this:

  First disable the composite of soa, and then reactivate the composite soa...

  https://docs.Oracle.com/CD/E14571_01/doc.1111/e14309/workflow_service.htm#OMDEV870

  Let me know the result.

  Thank you

  Suren

• Problem with the safety of the ADF - anonymous user

  Hi all

  The scenario is as follows:

  I have a Web application that consists of an unlimited taskflow and a page of home.jspx (more login and error pages).

  I activated the ADF (form based login, no automatic grant) security.

  I assigned the application role 'authenticated-role' on the home.jspx page, courtesy of "view". The file "Data.xml"-Jazn is apparently correct.

  I have deployed on the server without any problem, but when you access the application it does not prompt the user/pass, it shows me the page home.jspx directly, and if I want to get the name of the user, it returns me anonymous.

  If I restart the server, when I access the jspx, then it asks me for the user/pass.

  According to the Oracle documentation, policies created in the jazn-"Data.xml" file are copied during deployment in the folder system-jazn - data .xml

  My question is if the server only reads the file system-jazn-"Data.xml" during startup or periodically.

  What could be missing in the configuration?

  Any ideas?

  Thanks in advance

  JDev Version: 11.1.1.7.0

  WebLogic version: 10.3.6

  I think u missing to search for basic login form to generate the html default login and error pages.

  try to remove the security and reimplement things to deploy things in the server.

• "Oracle installed Base user" responsibility does not not for new users.

  Hi all

  We are facing problems with responsibility 'Oracle installed Base user'. This works well for existing users. When I assign this responsibility to new users, it displays error see screenshot below.

  	Error message
  	The following error occurred:
  	You do not have access to this feature.
  	No other information.
  	If the error persists, contact your system administrator.
  	Administrators can view the source of the page for more technical information about this error.

  I googled for this so that they are suggested adding CSI_NORMAL_USER or CSI_ADMIN to the user roles. even after adding user roles still faced the same question. Please suggest me on this.

  Thanks in advance,

  Guillaume.

  Hello Asif,

  Problem solved by assigning the role of CSI_NORMAL_USER users by logging in with the SYSADMIN user.

  Thanks for your time Asif.

  Thank you

  Guillaume.

• How to run htmldb_Get... as an anonymous user?

  I have an application which, with images as thumbnails. When the user clicks on the thumbnail image appears in the pop-up window.
  
  Application allows anonymous access, but the problem is when the user is not connected, picture shows up.
  
  I use this call to assign picture ID to the application element and it does not work for the anonymous user.
  
  get var = new htmldb_Get (null, $x('F101_PHOTO_ID').value, 'APPLICATION_PROCESS = null', 0);
  Get.Add ("F101_PHOTO_ID", record_id)
  gReturn = get.get ();
  get = null;
  
  Any tips?
  
  Thank you.

  Make sure that your page 0 is set to allow access by the public.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• set the resource to the anonymous user in OES

  Hi all
  
  I'm using wls - ssm.
  
  By default, OES protect all resources of our application.
  
  How to set a few resources for the anonymous user?
  
  With respect,
  WP

  You can either define an OES policy to GRANT allusers group which includes anonymous or you can watch this custom authenticator deployment which will exclude the WLS resources that usually rely on the anonymous user:

  https://OES-SSPI-providers.SampleCode.Oracle.com/

• HOWTO enable Adobe pdf-plugin and add packs of langugate for all users

  I have firefox installations on many terminalservers and my users are tapped daily with a prompt to enable Adobe PDF plugin view PDF files in the browser.

  We use a Group Policy object to substitute different parameters on the homepage by default and disabled the built-in PDF reader.

  How can I activate the plug-ins for all users?
  How to install the langugate packs and a dictionary for all users for Norwegian?

  Unfortunately, you can install is no longer extensions including Linguistics by the record of distribution/bundles in the Firefox program folder.

  • Bug 1144127 - Remove support for distribution/bundles (39 +)

  For language packs, see:

  • https://developer.Mozilla.org/Installing_extensions
  • https://developer.Mozilla.org/Adding_Extensions_using_the_Windows_Registry

  A file to mozilla.cfg in the Firefox program folder can be used to lock the prefs or specify new values (default).

  A file local - settings.js must be placed in the folder "by default/pref" also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See the Configuration:

  • https://developer.Mozilla.org/en-us/Firefox/Enterprise_deployment

  See also:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/

  You can try this in the mozilla.cfg file:

  //
  pref("plugin.state.nppdf", 2);

• 33 Firefox extension for all users

  How can I make an extension available for all users using Firefox 33?
  I have the as and extract if necessary?

  See:

  • https://developer.Mozilla.org/Adding_Extensions_using_the_Windows_Registry

• is there a way to tell firefox allow and remember the java plugin for all users via the command line or a script?

  Hello

  I have about 200 computers I want to push the next to parameter

  allow and remember the java plugin for firefox for all users
  

  is it possible to do this via a script or configuration file?

  You must create two files in the Firefox program folder.

  • local - settings.js file in the defaults\pref folder where you will find the channel - prefs.js
  • mozilla.cfg in the main folder of the Firefox program

• Why Firefox 31 change all icons PDF and open in browser, require a fix by using REGEDIT to set for all USERS on a computer?

  The solution to use REGEDIT in the question linked below almost fixed my problem with PDF files on more than 30 computers with multiple users on each computer:
  https://support.Mozilla.org/en-us/questions/1013642

  But I need to fix for all users on a computer without logging on each account on each computer. My challenge was to log on as an administrator and change the following key of the overall system instead:

  HKEY_LOCAL_MACHINE\Software\Classes\.PDF

  Name: by default
  Type: Reg_SZ
  Data: FirefoxHtm

  Changed FirefoxHtm to AcroExch.Document.11 data

  I use Adobe Reader XI on Win7 Pro 64-bit machines.
  The problem started when I ran a file downloaded to install the new version of Firefox on computers.

  Why Firefox would require me to use REGEDIT in this way to solve the problem?

  This only happens when you set Firefox as the default browser and Firefox thinks that there is currently no application PDF file handles.