set the resource to the anonymous user in OES

Similar Questions

• Order is created for the anonymous user without persistence of profile

  Hi all

  Could you please specify o how to implement below scenario

  Order is created for the anonymous user without persistence of the profile using cookies. So that when the user visits the site next time we can load

  order/cart previous from browser cookies.

  Yes, you can do that, the orders can be persisted without persistence of profile, but persistence of anonymous orders will increase the number of orders in the table quickly and can have an impact on performance, so if you plan to do it this way then make sure that your AbandonOrderScheduler job is running to clean up orders.

• the anonymous user basket

  Hi all
  Anyone can share a basket of the anonymous user how get merged when he loged in?
  
  Thank you
  Chandra Mohan

  It has been discussed recently in this thread

  How anonymous user shoppingcart get merged when he loged in?

• With the help of DVT for the anonymous user

  Hello
  
  Can we use DVT for customization of the user interface for the anonymous user, I need to use the PST with the user offline. Please let me know if there is a way to do
  
  Kind regards
  Sylvie

  Hi Sarah,.

  Not really, no. If the user is anonymous, the portal framework has no way to keep the changes he made in the database, because they cannot be associated with a single user.

  If you really want, you could automatically connect to a pre-defined user (aka. a user with the name "anonymous"). However, since everyone could be connected to the same user, changes made by anyone would be seen by everyone and users might be undo/redo each and other changes constantly.

  George

• The anonymous user security breaches?

  Hello

  What, exactly, is anonymous user?

  Please clarify on this, that would help us know the breaches of all anonymous logons.

  Any additional information. on safety violations relating to the event ID would be appreciated.

  Thank you

  Arjun

  Hi ansrsmicro,

  1. What are you referring to as security breaches?
  2. Are you referring to the computers in the domain environment?

  If you are referring to the computers in the domain environment then I suggest that you post your question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• How to set the database user password never expires

  Hi all
  
  I have a server linux with Oracle 11 g installed that is used primarily to test a few developers and QA people. I want to put the DB user password never expires. I ran the following (which works on a windows machine), but the password still shows that it will be completed in 7 days. Is there anything else I can do to "force" the pw to infinity? I tried to stop closing the DB, stop / restart the listener...
  
  ALTER DEFAULT PROFILE LIMIT PASSWORD_LIFE_TIME UNLIMITED;
  Select * from dba_profiles where the profile = 'DEFAULT' and AS "PASSWORD_LIFE_TIME" resource_name
  'PROFILE' 'RESOURCE_NAME' 'RESOURCE_TYPE' 'LIMIT '.
  'DEFAULT' 'PASSWORD_LIFE_TIME","PASSWORD""UNLIMITED ".
  
  Select the profile from dba_users where username = 'TEST ';
  'PROFILE '.
  'BY DEFAULT'
  
  Select the username, account_status, to_char (expiry_date, 'DD-MM-YYYY') date_exp from dba_users where username = 'TEST ';
  "USERNAME", "ACCOUNT_STATUS" "DATE_EXP.
  «TEST' «OPEN ' «»
  
  Help appreciated.

  This error is given when the PASSWORD_LIFE_TIME expires and the duration of the period of grace begins

  "PASSWORD_GRACE_TIME" "PASSWORD" "UNLIMITED"
  

  change PASSWORD_GRACE_TIME 0,.

• I tried to set the fast user switching, but when I click on save changes and go back, the box isn't here.

  Original title: cannot switch on Windows XP users

  My problem started on December 3, 2011 when I left my computer for lunch. When I came back, my screen saver was. He asked me to enter my user account password to log back, it does not take me to the Welcome screen. Then I entered my password and logged on. I tried to give to fast user switch, but when I click on save changes and go back, the box isn't here.

  My system
  OS: Windows XP Pro
  Media Center Edition
  Version 2002
  Service Pack 3

  If the system restore didn't help, use the line 34, left side of the http://www.kellys-korner-xp.com/xp_tweaks.htm

• Apex and Audit Vault - anonymous user instead of use the Apex

  Hello
  We have Apex 3.2 & Audit Vault 10.2.3.
  Audit Vault stores the name of the database user when a table is updated through SQL * Plus etc as expected.
  Problem is by Apex and insert into the db table using simple form on the table of the ANONYMOUS user is registered.
  We have real end-user connected upon Express request.
  
  Is anyway to configure the Audit Vault or Apex to use/pass v('APP_USER')? Must something be done by their Summit to set up a session?
  
  Running below shows 2 ANONYMOUS users and no end-user APEX_PUBLIC_USER or Apex.
  Select the user name, count (*)
  session $ v
  Group user name;
  
  All tips & guidance would be great - thanks in advance

  Hello:

  Since Vault Audit relies on the native database auditing it can only collect information that is recorded by the 'source' database in its audit trail. APEX fills the field of connection with the APP_USER CLIENT_INFO. However, CLIENT_INFO is not recorded in the audit log. Instead, the CLIENT_IDENTIFIER is captured. APEX records a composite value in this area. The value is in the format "APP_USER:SESSION_ID". This value must be recorded in the audit log and therefore sent to Audit Vault. Audit Vault reports should be able to display this field, and you can filter on it to get the information you need.

• Overview of the interface user Localizer: possible bug?

  In the CVI 9.0 (and 9.0.1) Localizer UI there's a preview feature which I guess should give a quick overview of the location of the User Interface.

  But I noticed that if in the file *.uir a channel has a 'Native' character set, the Localizer user interface overview is false if the local language has a different character set, even if I select this charset in the language box.

  For example, if you load the supplied \apps\localui\intgraph project and add the Russian language, you can use the UI Locator to locate the Panel correctly (by selecting the local language > Russian) when the program is run. The overview of the Localizer is wrong and shows 'strange' Russians charactersinstead...

  But, if you set the charset of the Russian channel in the *.uir file, the preview works very well...

  I did the same test as for the Chinese, and the behavior is the same.

  Is this a situation expected or is - a bug?

  Thank you

  Hey Vix,

  There seems to be a bug.

  I'll write a book and send it to R & D.

  Thanks for your help!

• Limit the control panel and IE for the Standard user account

  I'll set up a new computer for a 91 year old customer in a retirement home, who don't use the computer for e-mail and an occasional Wordpad document.  His son wants to put computer in place so that it cannot get to the Internet Explorer browser, or go to control panel, because he bumbles around the keyboard causing all sorts of problems requiring frequent service for me calls.

  The operating system is Windows Vista Home BASIC, so gpedit.msc is not installed.  I have activated the system administrator account for my use when I am called to repair the computer and set the Standard user to user account.  The problem is that the only way I found to disable IE and the Control Panel causes them be turned off in BOTH accounts.  I wish I could disable them ONLY in the user account.

  The only solution I found to disable the control panel is a registry hack in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current versionpolicies where I put a DWORD 32-bit "NoControlPanel" with a value of 1.  I tried to do that in the HKEY_CURRENT_USER hive, but it had no effect.  This kind of work, but there are two problems then; Mises_a_jour Windows 1) won't install and 2) when I have to go to work on the computer, I first change administrator user, then change the DWORD value to 0 and finally to restart the computer, causing additional assignments, lengthen my time at work.

  Second, the only solution I could find to disable IE was in the default protrams Panel, which disables the administrator as well.

  Can someone tell me if there is another way to achieve this, while IE and control panel are disabled only for the user?

  Change the security to the IE executable rights? Remove 'Users', while you keep the administrator rights.

  For control panel see 'Method Two' in this link:

  http://www.Vistax64.com/tutorials/120951-Control-Panel-show-specific-icons-only.html

  "creacontech" wrote in the new message: * e-mail address is removed from the privacy... *

  Thanks for your response, but will not solve problem of this "gentleman". The object is not so much to limit internet access, as it should restrict access to programs.  He is 91 years old, has small hands and types rapidly with two fingers, but made many mistakes.  Disability is before everything to prevent clikety snap everywhere, because he creates sort of a zillion copies shortcuts of the webpage on his desk, until everything hangs and I have to go a push up on his mess. The same reason applies to the Contorl Panel.  We don't want it to be able to get to the Panel "printers."  When a document will not be printed for a reason, he go, dummy click around and created a bunch of copies of the printer, with a gazillian of documents clogged up in the queue of the coil.  I had to cclear up to 100 documents from the spool on 50 copies printer queue.  It's really an economic problem for his son.

• How to get a user logged in (NAME of the END USER) in the APEX?

  Hi all
  
  I have Apex 3.1.2 Oracle 10 g 2.
  
  I have an integrated application, I need to print a REPORT based on the user who runs the application. While building the app, I used Application Express - authentication schemes and created an END USER.
  
  But, when the report is run, I get the error. This is because it takes the ANONYMOUS user name. How to get the user_name of the logged-on user?
  
  Thanks in advance.
  
  Guru
  
  Published by: guru Perrin on October 14, 2008 16:25
  Modified subject line

  Hi guru,.

  You can use the & APP_USER. application for this variable. He was replaced when executing, in the name of the user connected.

  Edit: PS
  Don't forget the point. in the end ;)

  Hope this helps,
  Greetings,
  Rutger

  Published by: Rutger_de_Ruiter on October 14, 2008 03:57

• Persist for anonymous user

  If I set persistOrdersForAnonymousUsers = true in the basket. Properties will persist the order? Or do I have to set an additional property to set the profile anonymous true as well? Once again how to use this behavior with the cookie?

  If you are not persisted the order, the order will be transitional for this particular session and when the user has left the session he'll lose this order. Next time, when it comes to a new session will be created and a new order so, no matter which instance serves as the answer. You may have seen that the order is to take for a particular scenario in which you close just a tab on the browser, in this case, the session continues.

  I instance1 and instance2 - but when user go www.mydomain.com, if instance 1 were the cart was created, today date limit user browser comes back if this instance of time 2 is to serve the request to the anonymous user does not see the basket.

  If you are not persistent anonymous order and cookie based not allowing authentication do not, user will never see his previous cart regardless of the instance that is the answer.

  See you soon
  R

  Published by: Rajeev_R on April 15, 2013 20:13

• How to run htmldb_Get... as an anonymous user?

  I have an application which, with images as thumbnails. When the user clicks on the thumbnail image appears in the pop-up window.
  
  Application allows anonymous access, but the problem is when the user is not connected, picture shows up.
  
  I use this call to assign picture ID to the application element and it does not work for the anonymous user.
  
  get var = new htmldb_Get (null, $x('F101_PHOTO_ID').value, 'APPLICATION_PROCESS = null', 0);
  Get.Add ("F101_PHOTO_ID", record_id)
  gReturn = get.get ();
  get = null;
  
  Any tips?
  
  Thank you.

  Make sure that your page 0 is set to allow access by the public.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• How to set the zoom to 125% for the partially sighted users

  On I.E. I can set the zoom to 125% on the computer so that all I see on my screen is enlarged as discount of 25% for low vision requirements. I can't find such a framework on Firefox.

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level and set a default zoom level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or try the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!