PES 10 must reconnect after the restoration of the other computer.

Similar Questions

• Can the Sandisk Sansa Fuze 4 GB MP3 read podcasts one after the other

  For health reasons, I need to take a long walk after each meal.  For many years during my walks that I listened to podcasts on my wonderful old Sandisk sansa, who plays a podcast after the other without action from me until I have stop.  It's perfect here in the North when I walk in 30 below zero weather. I mean that I don't want to open my parka and out the player to move to the next podcast.  If I had to do, they would find me lying in the snow, Frost, like all the rest of those poor Devils who bought the wrong MP3 player.  Anyway, after years of using the plug-in on my old Sansa fuze is pretty much exhausted and the player must be replaced.  I buy a sansa clip, but had to return when I discovered that he has not played podcasts one after the other, automatically. (And it's also too small for my needs).  Before you buy a new 4 GB sansa fuse, so I need to know if this greatest player will play my podcasts consecutively and one after the other.  Your advice would be much appreciated.

  MrHat wrote:

  I currently use the Sansa e250 2 GB MP3 Fuze player Walkman.

  There is an e250 (2 GB) and a rocket. They are 2 totally different players. The "rocket" (original) replaced the e200 series model.

  But if your podcasts are placed in the Podcast folder (or even record Audio books) and then ranked in the same "Album" folder, they must play consecutively without stopping, regardless of the model of reader.

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• 2: Sequentially all an elements of array, display one after the other

  Hello!

  This is a new start for another thread (http://forums.adobe.com/message/4897959#4897959).

  (ActionScript 2 ONLY)

  My site is a SWF that loads on the user requests data from a database of MySQL via PHP.

  I have no problem to control the whole communication process.

  On the homepage, as well as new which are already presented in the main part of the right side of the page, I want to display on the left side a few reminders of the essential services and also registered users of mandatory measures must do when visiting the site.

  DB returns: an array with one. separator and the total of the items in the array.

  In Flash, I use the following function to get the picture:

  remindersFct = function () {}

  var myReminders = new LoadVars();

  myReminders.identity = "reminders";

  myReminders.onLoad = {function (ok)}

  If {(ok)

  _root.reminderFld.html = true;

  var myArray:Array = new Array (myReminders.mydata.split("|"));

  myArray.length = myReminders.totalItems;

  }

  else {}

  Stop();
  

  }

  };

  myReminders.sendAndLoad ("misc.php", myReminders, 'POST');

  };

  remindersFct (); start the process

  I want to know different things...:

  1 - How can I 'explode' this table in its different elements (all are text strings)

  2. so, how can I know the SWF to view them, one after the other, in the field appropriate htmlText

  3. How can I adjust the length of each of these items, based on the length of the text they contain

  Thank you very much in advance for your help!

  Just another thing.  Given that you call the setTimeout for both halves of the conditional, it means that you don't need in the conditional and can move around outside, and you don't need in the first half of the conditional either...

  counter ++;

  Sto var = setTimeout (displaytext, delay);

  If (counter == theText.length) {}

  counter = 0;

  }

• for each page, I'm going to (including this one) something keeps vomit "Secure connection failed" notice, like 50, one after the other - how to make them stop?

  When I open a web page, and sometimes between the two, something launches a 'warning' that the "secure connection failed". I've added nothing to Firefox, but I stopped most of the security plug-ins or extension nothing helps. It wouldn't be too bad if it happened a page once or twice but I'm talking 10,15,20 one after the other.

  Try this solution:

  https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

• Why is my media player of securities randomly suddenly played on every album & not as shown, one after the other?

  All of a sudden my Windows Media Player (11) started playing the songs on each album random & not one after the other in chronological order, any ideas anyone please?

  Hello

  To better understand the issue, please let me know if you have made recent changes made on the computer before this problem?

  This problem may occur if the Windows Media Player settings are incorrect.

  Method 1:
  Let's first run the fixit and check if it helps.

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2:
  If the problem persists, I suggest you organize your digital media collection
  and check if it helps.

  Organize and search your digital media collection
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/library

  Check out the link for more information.

  Create and use your own customized reading lists
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How to play audio files, one after the other?

  Hi, I try to create an application that tries to read audio files a few one after the other. I've created a loop for playing audio files. But only the first track is played and the second song is playing only about 5 seconds while the rest do not get played at all and the two files that have played, pieces overlap, which is not supposed to be. Can you guys help me? I need urgent assistance that I need to finish it tonight.

  Here are my codes I created for the application:

  package mypackage;
  
  import javax.microedition.media.Manager;
  import javax.microedition.media.MediaException;
  import javax.microedition.media.Player;
  import java.lang.Class;
  import javax.microedition.rms.RecordStore;
  import java.io.InputStream;
  import java.io.ByteArrayInputStream;
  import net.rim.device.api.media.protocol.ByteArrayInputStreamDataSource;
  import net.rim.device.api.system.*;
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.extension.container.*;
  import net.rim.device.api.ui.UiApplication;
  import java.io.IOException;
  
  public class PlayMedia extends UiApplication{
      /**
       * Entry point for application
       * @param args Command line arguments (not used)
       */
      public static void main(String[] args){
  
          PlayMedia theApp = new PlayMedia();
          theApp.enterEventDispatcher();
      }
  
      public PlayMedia()
      {
  
          pushScreen(new PlayMediaScreen());
  
      }
      /**
       * A class extending the MainScreen class, which provides default standard
       * behavior for BlackBerry GUI applications.
       */
      final class PlayMediaScreen extends MainScreen
      {
          /**
           * Creates a new PlayMediaScreen object
           */
          public Player p = null;
          PlayMediaScreen()
          {
              String test3 = "Test(2seconds).mp3";
              String test5 = "Test(2seconds)2.mp3";
              //String test6 = "Test(2seconds)3.mp3";
              String test4 = "Test(2seconds)4.mp3";
              String test1 = "blind_willie.mp3";
              String test2 = "blind_willie.mp3";
              String mp3 = null;
  
              for(int i=0;i<5;i++){
                  if(i == 0){
                      mp3 = test1;
                  }
                  else if(i == 1){
                      mp3 = test2;
                  }
                  else if(i == 2){
                      mp3 = test3;
                  }
                  else if(i == 3){
                      mp3 = test4;
                  }
                  else if(i == 4){
                      mp3 = test5;
                  }
                  //testing
                  System.out.println("Song is "+ mp3 + "???????????????????????????????????????");
  
                  play(mp3);
  
                  System.out.println("Song is "+ mp3 + "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
              }
          }
  
          private void play(String mp3){
  
          InputStream stream = (InputStream)this.getClass().getResourceAsStream("/" + mp3);
  
              try {
                  //p = Manager.createPlayer(source);
                  p = Manager.createPlayer(stream, "audio/mpeg");
                  p.realize();
                  p.prefetch();
  
                  //testing
                  System.out.println("Creating Players!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
                  System.out.println("The mp3 is " + mp3 + "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
  
              } catch (IOException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
  
                  //testing
                  System.out.println("IO Exeception!!!!!!!!!!!!!!!!1 " + e);
  
                  //testing
                  System.out.println(p);
  
              } catch (MediaException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
  
              //testing
              System.out.println("Media Exeception!!!!!!!!!!!!!!!!1" + e);
  
              //testing
              System.out.println(p);
              }
              /*
               * Best practice is to invoke realize(), then prefetch(), then start().
               * Following this sequence reduces delays in starting media playback.
               *
               * Invoking start() as shown below will cause start() to invoke  prefetch(0),
               * which invokes realize() before media playback is started.
               */
              try {
                  p.start();
              } catch (MediaException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
  
                  //testing
                  System.out.println("Media Exeception for starting!!!!!!!!!!!!!!!!1" + e);
  
                  //testing
                  System.out.println(p);
              }
              /*
              try {
                  p.stop();
              } catch (MediaException e) {
              // TODO Auto-generated catch block
                  e.printStackTrace();
              }
              p.deallocate();
              p.close();
              */
  
          }
      }
  }
  

  Please help me! Thanks in advance!

  What you will do, is add the PlayerListener and / if you have in your loop code would go in the treatment of the END_OF_MEDIA event. Once that noise has stopped you will start the next sound and add the listener of player.

  //Declarations
  PlayerListener pListen;
  String mp3 = "";
  
  ..........
  ..........
  
  pListen = new PlayerListener(){
     public void playerUpdate(Player player, String event, Object eventData) {
        if (event.equals(PlayerListener.END_OF_MEDIA)) {
           if( mp3.equals(test1) ) mp3 = test;
           else if( mp3.equals(test2) ) mp3 = test3;
           else if( mp3.equals(test3) ) mp3 = test4;
           .........
  
           InputStream stream = (InputStream)this.getClass().getResourceAsStream("/" + mp3);
           p = Manager.createPlayer(stream, "audio/mpeg");
           p.realize();
           p.prefetch();
           p.addPlayerListener(pListen);
           p.start();
        }
     }
  }
  
  InputStream stream = (InputStream)this.getClass().getResourceAsStream("/" + mp3);
  p = Manager.createPlayer(stream, "audio/mpeg");
  p.realize();
  p.prefetch();
  p.addPlayerListener(pListen);
  p.start();
  

  So, add the try-catch blocks.

• In the library panel, pictures of miniatures become black one after the other

  Hello

  Last month, in the library panel, pictures of miniatures become black one after the other, and then they all black!

  I don't know how to recover the thumbnails.

  And in the develop module, the photo is very dark, until I click on your car.

  Thanks for helping me Olivier.

  Version of Lightroom: 6.2.1 [1046594]

  License: Permanent

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  The system architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 2.9 Ghz

  Built-in memory: 6143,1 MB

  Memory real available pour Lightroom: 6143,1 MB

  Real memory used by Lightroom: 900,6 MB (14.6%)

  Virtual memory used by Lightroom: 1032,1 MB

  Size of the memory cache: 399.2 MB

  Maximum number of links used by Camera Raw: 4

  SIMD optimization of Camera Raw: SSE2

  The system DPI setting: 96 DPI

  Composition on the Desktop enabled: Yes

  Views: 1) 1920 x 1080, 2) 1280 x 1024

  Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: no

  Parents to the graphic processor information:

  AMD Radeon HD 5800 series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13399 context 15.201.1151.0 the base profile

  Renderer: AMD Radeon HD 5800 series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Access to the library path: D:\Photos\_LightRoom\Lightroom\Lightroom Catalog.lrcat

  Settings file: C:\Users\Olivier\AppData\Roaming\Adobe\Lightroom

  Installed modules:

  (1) Facebook

  (2) Flickr

  (3) external module connected mode Canon shooting

  (4) external module connected mode Leica shooting

  (5) external module of shooting in connected mode Nikon

  Markers Config.lua: no

  Adapter n ° 1: supplier: 1002

  Device: 689e

  Subsystem: e177174b

  Revision: 0

  Video memory: 1012

  Adapter n ° 2: provider: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (High Definition Audio device)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x102

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  HiLolivGr1

  Please refer to this thread images regarding the black squares

  Concerning

  Assani

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• one after the other

  Hello
  

  SQL> with my_table as
    2             (
    3            select 'M082012' pera, to_number(10584338) snr, to_number(10) pnr, 'Beule' name, 'Anna' f_name from dual union all
    4            select 'M092012' pera, to_number(15965177) snr, to_number(15) pnr, 'Tester' name, 'Toni' f_name from dual union all
    5            select 'M082012' pera, to_number(14254501) snr, to_number(20) pnr, 'Wallen' name, 'Monika' f_name from dual union all
    6            select 'M012013' pera, to_number(14254505) snr, to_number(15) pnr, 'Wallen' name, 'Monika' f_name from dual union all 
    7            select 'M012013' pera, to_number(14254506) snr, to_number(15) pnr, 'Wallen' name, 'Monika' f_name from dual union all 
    8            select 'M082012' pera, to_number(10584339) snr, to_number(10) pnr, 'Beule' name, 'Anna' f_name from dual union all
    9            select 'M092012' pera, to_number(15965178) snr, to_number(10) pnr, 'Beule' name, 'Anna' f_name from dual union all
   10            select 'M012013' pera, to_number(10674833) snr, to_number(15) pnr, 'Tester' name, 'Toni' f_name from dual union all
   11            select 'M012013' pera, to_number(10674834) snr, to_number(15) pnr, 'Tester' name, 'Toni' f_name from dual union all
   12            select 'M082012' pera, to_number(10674835) snr, to_number(15) pnr, 'Tester' name, 'Toni' f_name from dual union all
   13           select 'M012013' pera, to_number(10539210) snr, to_number(30) pnr, 'Klose' name, 'Werner' f_name from dual union all
   14           select 'M012013' pera, to_number(12345678) snr, to_number(50) pnr, 'Meier' name, 'Otto' f_name from dual union all
   15           select 'M012013' pera, to_number(22345789) snr, to_number(50) pnr, 'Meier' name, 'Otto' f_name from dual union all
   16           select 'M082012' pera, to_number(10584346) snr, to_number(77) pnr, 'Carl' name, 'Frank' f_name from dual union all
   17           select 'M062012' pera, to_number(10550971) snr, to_number(77) pnr, 'Carl' name, 'Frank' f_name from dual union all
   18           select 'M092012' pera, to_number(15965185) snr, to_number(77) pnr, 'Carl' name, 'Frank' f_name from dual union all
   19           select 'M082012' pera, to_number(10584352) snr, to_number(50) pnr, 'Meier' name, 'Otto' f_name from dual union all
   20           select 'M092012' pera, to_number(15965191) snr, to_number(80) pnr, 'Duster' name, 'Hucke' f_name from dual)
   21       select case when pera = 'M012013' and rn3 = 1 then '*' end mark,
   22              pera,
   23              snr,
   24              pnr,
   25              name,
   26              f_name,
   27              case when pera = 'M012013' and rn3 = 1 then snr end mark_snr
   28         from (select pera, snr, pnr, name, f_name,
   29                      row_number() over (partition by pera, pnr, snr, name, f_name order by pnr, name) rn,
   30                      row_number() over (partition by pera, name, f_name order by pnr) rn3
   31                 from (select pera, snr, pnr, name, f_name,
   32                              max(case when pera = 'M012013' then 'Y' end)
   33                              over(partition by upper(name||f_name)) m_flag,
   34                              count(*) over(partition by upper(name||f_name)) cnt
   35                         from my_table)
   36                        where m_flag = 'Y'
   37                          and cnt > 1
   38                order by 4,5,6, to_number(substr(pera,4,4)||substr(pera,2,2)) desc)
   39       order by 4,5,6, to_number(substr(pera,4,4)||substr(pera,2,2)) desc,3
   40  /
  
  M PERA           SNR        PNR NAME   F_NAME   MARK_SNR
  - ------- ---------- ---------- ------ ------ ----------
  * M012013   10674833         15 Tester Toni     10674833
    M012013   10674834         15 Tester Toni
    M092012   15965177         15 Tester Toni
    M082012   10674835         15 Tester Toni
  * M012013   14254505         15 Wallen Monika   14254505
    M012013   14254506         15 Wallen Monika
    M082012   14254501         20 Wallen Monika
  * M012013   12345678         50 Meier  Otto     12345678
    M012013   22345789         50 Meier  Otto
    M082012   10584352         50 Meier  Otto
  
  10 Zeilen ausgewählt.
  
  SQL> 
  SQL> 

  I would get the SNR column values one after the other in the MARK_SNR column.
  
  It is possible to get the following with a SQL result?
  

  M PERA           SNR        PNR NAME   F_NAME   MARK_SNR
  - ------- ---------- ---------- ------ ------ ----------
  * M012013   10674833         15 Tester Toni     10674833, 10674834, 15965177, 10674835
  * M012013   14254505         15 Wallen Monika   14254505, 14254506, 14254501
  * M012013   12345678         50 Meier  Otto     12345678, 22345789, 10584352

  A very small thing noted Jeenesh :), no doubt your code works, but just to make sure we show you the good state of MARK_SNR:
  Just mirror your code with a subtle change.

      SELECT MIN (pera) KEEP (DENSE_RANK FIRST ORDER BY pnr) pera,
             MIN (snr) KEEP (DENSE_RANK FIRST ORDER BY pnr) snr,
             MIN (pnr) pnr,
             name,
             f_name,
             LTRIM (MAX (SYS_CONNECT_BY_PATH (snr, ',')), ',') mark_snr
        FROM (SELECT PERA,
                     SNR,
                     PNR,
                     NAME,
                     F_NAME,
                     ROW_NUMBER ()
                        OVER (PARTITION BY name, f_name ORDER BY pnr, snr)  --- added snr as well in order by
                        rn
                FROM my_table)
  START WITH rn = 1
  CONNECT BY PRIOR name = name AND PRIOR f_name = f_name AND PRIOR rn = rn - 1
    GROUP BY name, f_name
      HAVING COUNT (*) > 1
             AND MAX (CASE WHEN pera = 'M012013' THEN 'Y' END) = 'Y'
    ORDER BY 1, 3;
  

  OUTPUT:

  PERA     SNR     PNR     NAME     F_NAME     MARK_SNR
  -----------------------------------------------------------------------------------------------------------
  M012013     10674833     15     Tester     Toni     10674833,10674834,10674835,15965177
  M012013     14254505     15     Wallen     Monika     14254505,14254506,14254501
  M012013     10584352     50     Meier     Otto     10584352,12345678,22345789
  

  See you soon,.
  Manik.

• Play videos local one after the other

  Hi - I'm going to put in place 10 videos locally in Dreamweaver to play one after the other.  By local authorities, I say everything is on one computer and you just open the page HTML in Chrome and it works.  When the HTML opens in Chrome, I got the first video auto play and loops too.  But after the end of the #1 video, I have need for 2nd video to start, then third, and so on until the 10th is complete, then it goes back to #1 again.

  Is the code that I have on the local HTML page and it works for a video is:

  < video width = "720" height = "406" AutoPlay controls loop >

  < src = "source 1E.mp4" type = "video/mp4" > "

  < object data = "1E.mp4" width = "720" height = "406" > "

  < / object >

  < / video >

  .. .but I just can't figure out how to get the other 9 videos in there, so they play behind #1 loop and then back to #1 again.

  Does anyone have an idea how to do this?  Thank you.

  Video HTML5 can only play a single video.  It does not fit your goals.  That's why I suggested using your laptop Media Player by default since this will be the software that plays files.  If you do not have Windows Media Player to work, try something else like Media Player Classic (it's free, I use it all the time).

  Media Player Classic - Home Cinema Tutorial #3 - How to manage your playlists

  Nancy O.

• IDCS6 MACOSX JS: data merge multiple txt files one after the other

  Hello everyone.

  I have a situation where I have to data merge multiple text files to a single file indesign real "base". Databases formats are the same, the point of difference is a code in the second field of the database that refers to a postal box (not a zip/postal code, a code of 'distribution center' that has possibilities of 56 or greater). I would prefer data merge a file and then somehow split the PDF via Acrobat, but the length of postal areas resulting is incompatible and something that cannot be done if the document "split" feature in acrobat.

  The database starts as one massive file but using a one line code, can be divided into postal areas in separate text files.

  My last question: is it possible data merge several files at the same time (for example one after the other) and to give them their names based on the names of the input text file?

  OLE Kvern had a script to merge the data to a file without the user interface. I changed the last line slightly so that it generates a PDF file based on [high quality]:

  if(app.documents.length != 0){
          var myDocument = app.activeDocument;
          app.dataMergeOptions.removeBlankLines = true;
          //Select a source file.
          var myDataFile = File.openDialog("Select a data file")
          var exported = "file location(redacted for the sake of this post)"
          if(myDataFile != ""){
                  myDocument.dataMergeProperties.selectDataSource(myDataFile,);
                  myDocument.dataMergeProperties.exportFile(exported,"[High Quality Print]",);
          }
  
  }
  

  I guess that the answer has to do with the variable "myDataFile" and rather than just being open a dialog box, it could be somehow by selecting a table of text files, but it is where I am out of my depth.

  Ideas or thoughts which may not involve trying to do both the many mergers, but can somehow revolve around a great fusion of PDF?

  Thank you very much

  Colin

  Since writing my last response, I realized there was a better answer. It is a scenario of Peter Kahrel and a modified version of a script by Olav Kvern. Details can be found here: batch of merge data | Adobe Community

  I have since made other mods to the script is easier to understand:

  if(app.documents.length != 0){
  // make sure to use the document that is open
          var myDoc = app.activeDocument;
  // get the name of the document that is open for future naming purposes
          var myName = myDoc.name
  // get the location of the folder that contains both the indesign files and the text files
          var myLocation = "FULL PATH LOCATION OF FOLDER CONTAINING TEXT FILE AND DESTINATION FOR FINAL PDFS"
  // define the names of the data files to use based upon the names of the indesign files
          var myImport = myLocation + myName + ".txt"
  // define the names of the data merged PDFs to be created
          var myExport = myLocation + myName + ".pdf"
  // the actual engine for the merge, including DM instructions such as remove blank lines, object fitting etc.
          var myDataFile = myImport
          app.dataMergeOptions.removeBlankLines = true;
          if(myDataFile != ""){
                  myDoc.dataMergeProperties.selectDataSource(myDataFile,);
                  myDoc.dataMergeProperties.exportFile(myExport, "[PDF/X-1a:2001]", );
          }
  
  }
  

  If this script will automatically merge a file which is open as LONG as the data file is the same name as the indesign file with .txt at the end for example

  Woodward.indd (indesign file)

  Woodward.indd.txt (used for merging text file)

  This script does still not the original memory and who was using an indesign document, to browse for many text files and merging of PDF based on text files.

  HOWEVER, I am sure that the answer to that is based only on the use of the script above (no need to Peter batch convert script) and changing the line 9 to be a loop for... but again, this is where I come to a grinding halt. Any help would be appreciated.

  Colin

• Playing several clips video one after the other on the main timeline

  Excuse the probably simple question but I'm just starting with Flash.

  I imported a few trailers directly in flash and saved as video clips.

  I want to be able to insert these clips on the main timeline and play one after the other, by repeating once they all played.

  In the main timeline, I put one layer for each clip and a keyframe where the clip is inserted for each layer.

  When I go to play the flash file, is to show the first frame of each movie file and before the first frame of the next movie file.

  What should I do to make the entire movie file flash game in this specific context before moving on to the next section where is the following file in the sequence, then to play all this film?

  Sorry for what is probably a simple thing to ask.

  Thank you

  Create a new layer actions on the timeline stop() and the main square. commands on this layer in each frame where resides a movieclip.

  In each clip, at the end (last image) you mean the main timeline to play(); While it moves to the next section (where it stops because of the stop() commands you add).

  If at the end of each movieclip you put either:

  AS2: _parent.nextFrame ();

  for AS3: MovieClip (parent) .nextFrame ();

  For the last movieclip in programming, you will replace nextFrame() by gotoAndStop (1);

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.