Cannot install scanner driver to scan Brother MFC J430W.

Similar Questions

• Brother MFC-J430W all-in-One printer driver

  need a driver to be able to print photos from my windows picture program. What should I do?

  Drivers for Brother MFC J430W are available on the brother Support site.  The printer driver from a 'windows picture program"would normally be the same driver, the printer needs for all printing.  The reader can be downloaded from: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfcj430w_all

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

  I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

  Yes, you can try to replace localspl.dll winprint.dll

  Create a restore point from the system beforehand and restart the computer later.

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• Cannot install the driver/software package

  HI (sorry for my English, I'm a Spanish speaker).

  I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.

  I tried everything I could find in the forum and on the outside.

  I downloaded the driver from:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=ES&CC=ar&DLC=es&sw_lang=&product=3745...

  and it can run fine.

  When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.

  So I can't install anything, can not get the HP Solution Center and other software for analysis.

  Is not the antivirus, I tried to close the shields in time, not if.

  I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.

  I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.

  Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.

  Hello

  Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.

  And regarding the specific error:

  Start the installation and follow the steps.

  Once reached the license agreement window, click the 2nd link above (using the Internet).

  Make sure that the two options set as No, thank you.

  Accept the license agreementt continue following the install.

  You see a difference by changing these settings?

  Kind regards

  Shlomi

• Error 39 XP on dat72 tape driver code - cannot install the driver

  Help! In an IBM computer running Windows XP Pro SP 3 I am looking to replace a defective DAT72 IBM (Seagate) drive with another band DAT tape drive - the replacement drive came from Dell, but it's the exact same Seagate drive. For some reason, the new tape drive is first detected as a Seagate drive, then askes for a quantum qdatwin.sys file - the former disc one driver IBM). I downloaded the latest drivers for Quantum, Dell and IBM, and any driver I install I get the same message that "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I should mention that when I started this process trhe CD player had mysteriously disappered. I had the Code 39 error on the CD player as well at the time - but not on the tape drive. I went to States support of info on it and choose the "have them fix it" (or whatever it is) and it did fix (problem of CD which is). Now it seems I have the same problem with the Unwinder - but I can't find any info on how to fix this. Also, I tried resdtorign the computer at a checkpoint before the problems started - not question how I chose, I get the same error Windows cannot restore to the restore point - choose another. I tried 7 different restore points with the same results. I ran a full antivirus scan who come clean. Furthermore, I use Acronis backup software that does not all drivers of his own band - it relies on the drivers for the tape drive. Everything worked fine for a good year before it happened. At the end of my rope here.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Equium L40 - 10z PSL41E - cannot install audio driver WinXP

  Hello!

  I'm having a problem with the installation of the Windows XP sound card drivers

  Computer laptop informatio, Toshiba Equium L40 - 10z (bought from PC World) PSL41e
  2 GB Ram DDR2 - 667 Mhz
  Core 2 [email protected]
  120 GB hard drive
  Intel GMA 945 graphics card with shared memory

  I can't find drivers for my laptop, the specification is indicated above. I have windows XP with service pack 3 installed and the system is unable to install drivers Realtek High Defination or audio drivers Realtek AC 97 ". I even tried the latest drivers version 1.86 but not its use.

  I read the other posts on this forum and have tried the other model audio drivers as well, it seems that after running the installer from several other realtek audio drivers for windows XP THAT is of no use. I even tried to add material manually through the Device Manager and have to install these drivers for realtek high definition audio and the realtek ac 97 audio drivers.

  Of course, this helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  I also tried to install the drivers of toshiba A100/A200 without exploitation, however, I read somewhere that there is a windows XP patch that is required to be installed, so that windows detect the chip high definition, which is on the motherboard. If one can provide a direct link to a driver with the .inf file that will have the information for the material, or if someone can advise (or provide a link for) according to microsoft update is required for windows XP, in the appropriate hardware detection, will be really useful.

  I'm also sorry for my bad English I'm unable to articulate with the type of problem, I faced. But if anyone knows of a solution and additional information is needed, I will be happy to provide you with everything I know.

  I'll be very grateful to anyone who helps address this issue. Looking forward to a positive response :).

  > have windows XP with service pack 3 installed
  To my knowledge, that the XP SP3 is not published official. Only a beta version is available.
  Then go back to SP2!

  > the system cannot install drivers Realtek High Defination or Realtek AC' 97 audio drivers
  Realtek AC 97 audio driver is not compatible! You must use the driver from Realtek High definition.

  > Of course, it helps the drivers to install, but windows cannot activate the material with an error code 10 with a note of explanation on behalf of the driver in Device Manager.

  The problem is that you have not installed the MS XP patches that are necessary to get the sound working.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=59&ThreadId=25916

  You need the KB888111 and KB835221 hotfix

  Good luck

• Satellite C650 and WXP - cannot install the driver for WLAN adapter

  Hello

  I have recently 'come down' Win 7 to Win XP on my laptop because the software I use works best from XP. It's a pain because of the SATA drive, I needed to streamline a facility etc... but now, I'm happy to announce that I am in place and running under XP with one small exception...

  I can't get my wireless adapter to install.

  The LAN adapter ' Atheros AR8152 PCI-e... ' is installed and running

  Plug-and-play find a "network controller", but it cannot install it and leave her with the formidable yellow '?'

  I have visited the support site, entered my details laptop and downloaded the appropriate drivers, but they don't seem to want to settle. File self extract and then never run the Setup, as Toshiba only I downloaded self-extracting exe files, I have no file inf etc. try manually.

  Any suggestions welcome because I ran officially ideas

  What Satellite C650 do you have exactly? I can see on the Toshiba download page there are 4 different models. One you have?
  Check it please sticker post name of exact model so that we can check the specification s notebook and see what WLAN adapter is inside and the bottom.

• Qosmio F30-140 - cannot install the driver display and Bluetooth

  Hi all!

  I have a little problem with the installation of recovery.

  After installing Windows I don't have the graphic card installed and is not everything, I can't turn on bluetooth because the computer cannot install it. New form of drivers Toshiba do not change it's the same thing. If I install the graphics card, the info is this graphics card was not found. Bluetooth installation always hangs in the middle. All the original drivers are on the disk, but I can not install them. All I get is a "controller VGA with one?" in Device Manager.

  Help, please!

  Hello

  Normally, everything must be installed correctly after using the Toshiba Recovery disk but before trying to update a driver, you must remove the old driver first. So, go to Control Panel-Add/Remove programs online and remove the old driver and reboot the laptop. You can then install the latest driver on the Toshiba site.

  In the worst case, there is something wrong with the motherboard and you must go to an authorized service provider, but first try the new drivers.

  Good bye

• Satellite Pro M70 - cannot install the Driver of Toshiba Power Saver

  Hi, I can not install driver of toshiba power saver on my laptop because instalation crashes with error 1610: the configuration data for this product are damaged. Please contact the support staff. I tried several versions of driver of standby power. I received the latest official chipset driver... Someone knows how to fix this?

  My second problem is with the battery, my laptop running on battery max 10 minutes (I have my laptop for 2 years) and I often force using battery power. Battery can lose so much capacity in 2 years even if I used for my battery once a week?

  Sorry for the English and thx for answer

  I think that you should not install this driver, the only saving electricity only.
  What about the battery? In my opinion, it is possible. In my opinion, the duration of battery life cannot be defined so easy.
  Some batteries perform well after 3 years of use, and some of them are dead after only a year.

• Cannot install wireless driver for Satellite A40

  A few days ago I had to reinstall the OS windows (XP) on my laptop. Since then, I'm not able to get a WiFi connection. I tried to install the driver on the CD that was in the package, I got when I plug the laptop, but the installation failed. I am able to get internet with a LAN cable, however, the only type of access provided in the College, I screw is wireless, so I really want to make it work again.

  There is no option for a wireless connection when I click on "create a new internet connection". However, through the program "ConfigFree" (included in the installation package) I know that my wireless adapter cannot "see" the wireless network. In addition, when I click on "view available wireless connection" icon of the internet wireless next to the time, it shows nothing.

  Really, I don't know how to run again and would be pleased if someone can help me.

  Kind regards
  Katerina

  Hello

  I'm a little confused about the description of your problem full of m.
  First of all, it would be very interesting to know if you have used the WLan in the past!
  Did you use WLan on this laptop?

  I searched a little on the net and didn't find any A40 with the installed wireless card!
  Please check under network adapters Device Manager if a wireless network card or an unknown device appears.

  If it s not available under network adapters, then your laptop was not equipped with the LAN card internal minPCI!

• Cannot install the driver

  I have a new HP Pavilion nine box 400-224.  I, like others have downloaded Windows 8 pilots (the HP site has even acknowledged that this box Windows 8.1) for my Officejet Pro l7580

  Another post in the forum, I tried "refresing Windows" (Nice, because it removed all other applications I spent time install).

  Trying to reinstall the drivers after the update, I got the error message, something to the effect of: this file system is missing in: c:\windows\system3hpzprl40.exe - inf - m...

  Then I saw this post.  I followed the steps to the letter, except that you cannot install Adobe - when tried in doing so, I received a message that Adobe has been already installed/part of Internet Explorer.

  Then after ALL these monkey business, I got the message that the system could not find the specified file.  c;\Uses\brian\deskop\7zs44d5\setup\hpzshl.ice_sufix... exe m

  So my question is that now?  I've NEVER had to dink around during 4 hours trying to get a printer driver to install - in PARTICULAR that of HP.  As another user has posted, the pilot is "very rough."

  I had to buy this new system (and not by choice and the motherboard has failed on my old system), and I was very disappointed, both with performance and the inability to perform a task simplete to install a print driver.

  Hi Brian-C

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  
  Sorry to hear that you have questions about getting your printer is installed on your Windows 8.1 operating system.  I have a few steps we can take to try to solve this problem.

  First of all, if you have the printer connected to your computer with a USB cable, please remove and let off.  Please click on the following link and download HP Officejet Pro software and driver removal utility to your desktop. Once it was saved in the computer, double-click the icon and follow the instructions on the screen.  Once the removal has completed, download and run the HP printer install wizard for Windows.  Please do not connect any cables from the printer to the computer until you are prompted to do it from the Installer Wizard.

  If you need further assistance, feel free to write again and I'll be happy to help you.

  Thank you for your time.

• HP Laserjet M1522 nf - cannot install the driver (print spooler is stopped)

  -installed driver using the installation disc, but when I tried to add the printer to the wireless network, all THE existing definitions of the printer disappeared and print spooler has stopped. I restart the spooler, but when I try to install the driver, the error message says "cannot install printer - Print Spooler App stopped. Please start the spooler or restart the computer. ") Operating system Vista).  I've upgraded to Windows 7, but the problem persists.

  So is the printer connected to the router or you are going through the router to a shared printer on another computer.

  Whatever it is, the printer driver must be executed in the process of printisolationhost rather than the spoolsv process if the spooler will not process that is corrupting the print driver.

  When you have Pro and Ultimate is easy.  If you have home made me know if gpedit.msc launches Group Policy Editor.

  For Pro and home run printmanagement.msc

  Drivers, find the 1522, right click, pilot of isolation, isolated

  Now, start the spooler service.  Since the driver does not work, you must remove it by using any HP software used to install the driver.  Normally in the programs, you can find the installation of HP and select uninstall.  Reset.  HP.com head, pick up the HP driver published last month and start again

  version 4.3

  4.3 March 23, 2010

  220,7

  March 23, 2010
  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Cannot install the driver for Deskjet F4500

  I get the error message: "the system cannot find the specified file' where to install the driver for F4500 to a new race of ASUS ZEN widows 7 64 bit and install then fails." Everything works fine on my old Lenovo (also Windows 7). Help!

  You try to use disk or have you downloaded the latest drivers on the website of HP series?

  Here is the latest version of the drivers for your printer and the full OS features:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-73705-2&cc=us&DLC=en&LC=en&OS=4063&product=3944758&sw_lang=