Photo & Avatar

Similar Questions

• How to change photo avatar lil at the top right of the hotmail profile?

  Hey there's good people!

  For some reason when I change my display picture in my profile for a change but the avatar of lil top-right corner is always the same it never becomes one that is in my profile. Please can someone give me a tip for my avatar on the upper right is the same as that of my profile. I know that you have to go click next to your avatar to change the photo and it would auto, it allows to work for me, now it doesn't. Please how can I change my avatar lil on the upper right photo, so it's the same as my profile picture.

  Thanks guys :)! Ill wait!

  Maybe you want to ask your question at the forum of Windows Live Hotmail. After all, it's Vista Forum.
  Here is the link:
  http://www.windowslivehelp.com/solutions.aspx?ProductID=1

  t-4-2

• "newbie" O.T. {cannot upload photo to profile} {sorry, found no place else ask}

  Hello... Sorry to ask off topic here. I went to the 'General', but could

  not find a link to start a discussion.

  Question:

  in my profile section "Edit community profile", there is a text but to the navigate to a picture.

  I have traveled several times to a .gif 14KO on my local hard drive and clicked on ""Save"

  every time. even if I get no error, no image is loaded.

  any ideas?

  Thank you

  Kind regards... Gerry (lowry)

  Thread moved to the VMware communities Feedback forum.

  The photo/avatar function has been disabled, so I don't think that you can upload a photo.

• Unbound invocation open the target application selection worksheet.

  Hello

  I'm looking to create an invocation to share a link, but also a picture. I want to open a worksheet that contains apps to draw in order to share an item.

  Q_INVOKABLE void DataItemModel::shareImageUrl() const
  {
   bb::system::InvokeManager manager;
   bb::system::InvokeRequest request;
   request.setAction("bb.action.SHARE");
   request.setMimeType("text/plain");
   request.setData( this->getShareUrl().toUtf8() );
   manager.invoke(request);
  }
  

  Q_INVOKABLE void DataItemModel::shareImage() const
  {
      QString dir = QDir::tempPath() + "/image.jpeg";
      QFile file(dir);        // Saving the image to the file system because the invocation requires it. My images are    downloaded and kept in memory only
      if (file.open(QIODevice::WriteOnly))
      {
          file.write(m_image->getRawImageData());
      }
  
      bb::system::InvokeManager manager;
      bb::system::InvokeRequest request;
  
      request.setAction("bb.action.SHARE");
      request.setMimeType("image/jpeg");
      request.setUri("file://" + dir);
  
      manager.invoke(request);
  }
  

  Here's how I call from QML

                //Inside a ListView...
               listItemComponents: [
                   ListItemComponent {
                       type: "item"
                       DataItem {
                           contextActions: [
                               ActionSet {
                                   ActionItem {
                                       title: qsTr("Share image url")
                                       onTriggered: {
                                           ListItemData.shareImageUrl();
                                       }
                                   }
                                   ActionItem {
                                       title: qsTr("Share image")
                                       onTriggered: {
                                           ListItemData.shareImage();
                                       }
                                   }
                               }
                         ]
                   ]
  

  In both cases, it only starts the BBM application.

  Since it is a unrelated call, I would expect sheet of selection of the app to show where I could choose NFC Bluetooth, messaging, Facebook, etc. and the plethora of other applications that support sharing.

  To aggravate something like it for a sharing URL works from QML (I wasn't able to share an Image this way via QML however). He opened a sheet with a list of applications in the choice. It is totally confusing, because it seems to be the exact thing I've done in C++.

                                 InvokeActionItem {
                                      query {
                                          mimeType: "text/plain"
                                          invokeActionId: "bb.action.SHARE"
                                      }
                                      onTriggered: {
                                          data = ListItemData.shareUrl
                                      }
                                  }
  

  How would open the worksheet selection app using the framework of the call?

  I had this problem as well a couple of weeks and solved it. When you call and independent, the system will select a logon request. You is better to use a call related, but do not specify a target.

  QString path = QDir::current().absoluteFilePath("shared/photos/avatar.jpg");
  m_pInvocation = Invocation::create(InvokeQuery::create().parent(this).mimeType("image/png").uri(QUrl::fromLocalFile(path)));
  
  m_pInvocation.trigger("bb.action.SHARE");
  

• How to share the text on BBM group

  Hi I want to share text on the BBM group. How to do this?

  If during polls BBM (specific contact), I use:

  InvokeActionItem {
              title: "Share Text Over BBM"
              query {
                  mimeType: "text/plain"
                  invokeTargetId: "sys.bbm.sharehandler"
                  invokeActionId: "bb.action.SHARE"
                  data: "This is some text to share."
              }
          }
  

  And it works, but how to share on BBM group?

  And is there a documentation on the complete list of possible value for:

  -InvokeTargetId

  -InvokeActionId

  -MIME type

  Thank you

  sys.bbgroups.sharehandler is the id of the target for the BBM groups.  Here are some examples on how to share text or an image with a group BBM.  The user will be asked to select the group to share with.

  InvokeActionItem {
      title: "Share Text Over BBM Group"
      query {
          mimeType: "text/plain"
          invokeTargetId: "sys.bbgroups.sharehandler"
          invokeActionId: "bb.action.SHARE"
          data: "This is some text to share in a group."
      }
  },
  InvokeActionItem {
      title: "Share Image Over BBM Group"
      query {
          invokeTargetId: "sys.bbgroups.sharehandler"
          invokeActionId: "bb.action.SHARE"
          uri: "file:///accounts/1000/shared/photos/avatar.png"
      }
  }
  

• Invoke the map sharing in C++

  Hello developers

  I am trying to invoke the map sharing in C++, but it seems that it does not work as expected. The map tell you is this one...

  

  The code I have so far is the following

      InvokeRequest request;
      request.setAction("bb.action.SHARE");
      request.setMimeType("text/plain");
      request.setData("Test for sharing");
  
      InvokeManager manager;
      manager.invoke(request);
  

  When I run this code, it will invoke a card asking me to select a BBM group. It's like I have already chosen the BBM group option in the sharing card.

  Does anyone have an idea why this goes wrong?

  You request an independent appeal.  When you perform an independent application that allow you to choose the application to use the framework of the call.  To display the selector as you want, make a connected call but do not specify a target.  Here's how:

  QString path = QDir::current().absoluteFilePath("shared/photos/avatar.jpg");
  m_pInvocation = Invocation::create(
          InvokeQuery::create().parent(this).mimeType("image/png").uri(
                  QUrl::fromLocalFile(path)));
  
  QObject::connect(m_pInvocation, SIGNAL(armed()), this, SLOT(onArmed()));
  

  and then...

  void BBMInvocation::onArmed()
  {
      m_pInvocation->trigger("bb.action.SHARE");
  }
  

• profile avatar: what is an avatar? How can I change? where are the avatars to select another? can I use a photo from my profile avatar?

  PROFILE OF COMMUNITY SUPPORT: I CLICKED ON EDIT AVATAR AND HE OPENED MY OFFICE LIST. WHERE CAN I FIND AVATARS POSSIBLE CHOICE. CAN I JUST USE ONE OF MY PHOTOS, IF SO HOW DO I DO THIS? I'M A BEGINNER, VERY, VERY, EVERY DETAIL IS SO NECESSARY FOR ME TO FOLLOW THE BREAD CRUMBS. ALL IN CAPITAL LETTERS: I AM NOT SHOUTING AT YOU, HAVE SOME PROBLEMS WITH LIGHT... A.

  FEB 09. 2013 16: 54. THANK YOU FOR YOUR HELP.

  Hello andyusfr, yes you can use an image or a photo as avatar, but don't forget "avatars" have low resolution, so it's a little hard to see all details.

  You can search in the search engines also for avatars.

  If you don't like an avatar, you can change to another, or to default (remove a link if poster on the page edit beside the new avatar profile.) If you click on it, which will restore the default avatar)

  Thank you

• Message app - owner not shown avatar photo

  You can solve this problem? It happened with 5.0.2 now happens with 5.1.1. Owner's avatar is not displayed even if it is defined. Put to the test after repaor with PC companion.

  I just received information that this problem will be fixed in a next update.

• How can I change my Xbox LIVE avatar photo in the application of Windows 8 games?

  I have explored the app games for Windows 8, but was unable to find an option to create and save a new Xbox LIVE avatar image.    I remember changing my Xbox LIVE avatar on the Xbox.com Web site in Windows 7, but when I click on the section of the Avatar of the site editor I get redirected to the application of games for Windows 8.  Am I missing something?  It is a fundamental characteristic which I think should be added to the application of games for Windows 8 as soon as possible if it is not already.

  Thanks, this really helped

• Avatar

  I am sure that it is not displayed in the right shoelace, but put my avatar to my profile, everything seemed to be going well and it shows in my profile, but not here. Is there some time or p [ost conditions to appear? Perhaps Matt or Mark could help out here? Thanks gang...

  Tony

  You sure have a loaded avatar? I can see from your profile that you have a picture, but the two are different.

  Go to your profile (your orders > profile - use the drop-down list above or click on your name in a post), and then click on "photo change & avatar ' in the right hand navigation. The avatar - that shows in your posts - is on the right.

  And thanks for all your great activity in this community!

• change photo on passport profile

  a random - ugly photo was attached to my profile here... How to change?

  Hello

  Go to your profile page by clicking on here.

  On the right side, open 'more resources' and then click on 'user settings' - on the next page, click on "Avatars" and select the one you want.  You can also choose to upload a custom Avatar although this will have to be approved by a moderator before it will appear.

  Kind regards

  DP - K

• (Bike G 2nd Gen) How to set up messaging avatar?

  Hello.

  Recently I factory reset my phone & now I've lost my avatar beside my txts. I know this isn't a big deal, but I like the personal touch when I have conversations with people text. I downloaded an image so that you know what I mean. Can someone please tell me what to do to get back them.

  Thank you

  According to me, it is defined in the settings of their contacts - so add photos to your contacts, and you should then see in the e-mail.

• Photo of contacts in hotmail maybe icon chanded to a real image of the contact?

  I looked at all the options that I can find, including right click on the photo icon.

  Hi slothinker,

  Thank you for posting. The avatar alongside the names in your contacts list will change only if this person has a Live account and it sets themselves. There are currently no functionality to set client avatars in your contacts list.

  I hope this helps. Let me know if you have any questions.
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I change the JPEG images and photos using the program "Paint"?

  I'm taking a good picture of me with my laptop built-in digital camera, so I can use it as my avatar on my blog page.  I tried to change it and other images using the 'Paint' program, but I am not so much with things, as brighten up my eyes and my teeth by a shade or two.   Is there someone who could give me any suggestions on the best way to do it?  When I do, I do the picture of me end up looking like Little Orphan Annie.  Of course, I appreciate all the tips and help and thanks to all who respond!

  If you need a program with more options... the
  Freeware PhotoScape can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoScape
  http://www.PhotoScape.org/PS/main/download.php
  (NT/2000/XP/Vista/7)
  (the download is: PhotoScape_V3.6.1.exe)

  PhotoScape? (tutorials)
  http://www.PhotoScape.org/PS/main/help.php

  For example...

  How to whiten teeth with PhotoScape:

  Open PhotoScape and select... Editor in Chief.

  Click on the Viewer and find the picture you want to
  Ed. Left click of the photo to highlight and click on the left...
  Editor tab.

  Left click the + button to zoom in and get a good
  view of the teeth of the subject.

  Reach... Tools tab / effect brush / brighten up...

  Choose a size of brush near the size of the teeth.

  Left click / drag the toothbrush to reach...
  the brightness desired... you may need several passes
  If the result is not acceptable to the left click Cancel all
  button and try again.

  Also... you can place the brush on a tooth and the left click
  one or more times to brighten this single tooth.

  It is best to save as and give your modified version, a new name...

  See you soon

• For some reason a cant open my "documents" link in the right-hand corner under my avatar. This is the error code 0 x 80070057 settings are incorrect

  Original title: Start menu

  Hello

  I have a problem with my Start menu in vista.
  For some reason a cant open my "documents" link in the right-hand corner under my avatar.
  His explains the configuration (I tried to start the copy and stick to the desktop screen) operation because there is an unexpected error of cant.
  This is the error code 0 x 80070057 settings are incorrect
  and then the registry of reg key change for key documents.

  Well... How can I get my link back to work again?
  Because if I click right mouse on the link and the properties of its white screen bit the properties of documents.
  One thing that I remember is that the path to the documents is c:/user/documents instead of the documents.
  But the name of the map itself I've already renamed as 'documents' even on C: / as on the windows user, but the cushion that him is a "docu".
  And if I want to configure target to DOCUMENTS it says incorrect "whether it is the right path to the target."
  And if it is resolved in its ready to use again, I guess?

  Thank you already!
  My best regards,
  Kenneth

  (Sorry for this type of bad English, I'm Dutch so...)

  http://ImageShack.us/photo/my-images/521/naamloosxy.jpg/
  Sorry, I jumped over to my other account but that's what its all about even copy / paste gives me errors, I need to get the path of documents users card return related to the link in my Start menu.

  Resolved, I found the answer
  http://forums.techarena.in/Vista-Help/1005434.htm 
  ->>
  http://www.Vistax64.com/tutorials/148461-personal-user-folder-restore-missing-folder.html

  Thank you!!